From: Douglas Gilbert <dougg@torque.net>
To: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, tomfa@debian.org, kumba@gentoo.org
Subject: [ANNOUNCE] sdparm 1.00
Date: Wed, 18 Oct 2006 11:12:24 -0400 [thread overview]
Message-ID: <45364458.7020507@torque.net> (raw)
sdparm is a command line utility designed to get and set
SCSI device parameters (cf hdparm for ATA disks). The
parameters are held in mode pages. Apart from SCSI devices
(e.g. disks, tapes and enclosures) sdparm can be used on
any device that uses a SCSI command set. Virtually all CD/DVD
drives use the SCSI MMC set irrespective of the transport.
sdparm also can decode VPD pages including the device
identification page. Commands to start and stop the media;
load and unload removable media and some other housekeeping
functions are supported. sdparm supports both the linux
kernel 2.4 and 2.6 series.
This version adds support for vendor specific mode pages.
It modifies some exit status values to be the same as
those found in the recently released sg3_utils version 1.22 .
For more information and downloads see:
http://www.torque.net/sg/sdparm.html
Changelog:
http://www.torque.net/sg/p/sdparm.ChangeLog
A release announcement has been sent to freshmeat.net .
Doug Gilbert
reply other threads:[~2006-10-18 15:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45364458.7020507@torque.net \
--to=dougg@torque.net \
--cc=kumba@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=tomfa@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox