* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
@ 2006-10-20 9:34 ` Cornelia Huck
2006-10-20 13:19 ` 2.6.19-rc2-mm2 Alan Cox
2006-10-20 11:39 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
` (10 subsequent siblings)
11 siblings, 1 reply; 51+ messages in thread
From: Cornelia Huck @ 2006-10-20 9:34 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Martin Schwidefsky
On Fri, 20 Oct 2006 01:56:41 -0700,
Andrew Morton <akpm@osdl.org> wrote:
> +tty-preparatory-structures-for-termios-revamp.patch
> +tty-preparatory-structures-for-termios-revamp-strip-fix.patch
> +tty-switch-to-ktermios-and-new-framework.patch
> +tty-switch-to-ktermios-and-new-framework-warning-fix.patch
> +tty-switch-to-ktermios.patch
> +tty-switch-to-ktermios-nozomi-fix.patch
> +tty-switch-to-ktermios-bluetooth-fix.patch
>
> tty reworks.
sclp_tty needs to use ktermios as well.
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
drivers/s390/char/sclp_tty.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
--- linux-2.6-CH.orig/drivers/s390/char/sclp_tty.c
+++ linux-2.6-CH/drivers/s390/char/sclp_tty.c
@@ -60,7 +60,7 @@ static unsigned short int sclp_tty_chars
struct tty_driver *sclp_tty_driver;
-extern struct termios tty_std_termios;
+extern struct ktermios tty_std_termios;
static struct sclp_ioctls sclp_ioctls;
static struct sclp_ioctls sclp_ioctls_init =
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 9:34 ` 2.6.19-rc2-mm2 Cornelia Huck
@ 2006-10-20 13:19 ` Alan Cox
0 siblings, 0 replies; 51+ messages in thread
From: Alan Cox @ 2006-10-20 13:19 UTC (permalink / raw)
To: Cornelia Huck; +Cc: Andrew Morton, linux-kernel, Martin Schwidefsky
Ar Gwe, 2006-10-20 am 11:34 +0200, ysgrifennodd Cornelia Huck:
> --- linux-2.6-CH.orig/drivers/s390/char/sclp_tty.c
> +++ linux-2.6-CH/drivers/s390/char/sclp_tty.c
> @@ -60,7 +60,7 @@ static unsigned short int sclp_tty_chars
>
> struct tty_driver *sclp_tty_driver;
>
> -extern struct termios tty_std_termios;
> +extern struct ktermios tty_std_termios;
>
tty_std_termios is defined in the header files, and has been since
before the S/390 port existed. This line should be unncesssary as its
defined in tty.h
Alan
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
2006-10-20 9:34 ` 2.6.19-rc2-mm2 Cornelia Huck
@ 2006-10-20 11:39 ` Mariusz Kozlowski
2006-10-20 13:32 ` 2.6.19-rc2-mm2 Anton Vorontsov
2006-10-20 16:19 ` 2.6.19-rc2-mm2 Andrew Morton
2006-10-20 11:59 ` 2.6.19-rc2-mm2 Gabriel C
` (9 subsequent siblings)
11 siblings, 2 replies; 51+ messages in thread
From: Mariusz Kozlowski @ 2006-10-20 11:39 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hello,
I installed 2.6.19-rc2-mm2 without kernel debugging options enabled first.
The output below is what I saw when the kernel started. Then I enabled
debugging and system hangs with oops with no trace in the logs. It is not
easily repeatable though. It happens from time to time.
BUG: unable to handle kernel NULL pointer dereference at virtual address
00000000
printing eip:
ded5bc12
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
last sysfs
file: /class/pcmcia_socket/pcmcia_socket0/available_resources_setup_done
Modules linked in: pcmcia firmware_class yenta_socket rsrc_nonstatic
pcmcia_core
CPU: 0
EIP: 0060:[<ded5bc12>] Not tainted VLI
EFLAGS: 00010002 (2.6.19-rc2-mm2 #1)
EIP is at get_pcmcia_device+0x1e/0x93 [pcmcia]
eax: ddba2828 ebx: fffffff0 ecx: 00000000 edx: 00000000
esi: 00000000 edi: 00000000 ebp: 00000246 esp: ddac7f30
ds: 007b es: 007b ss: 0068
Process cardmgr (pid: 4807, ti=ddac6000 task=ddea7030 task.ti=ddac6000)
Stack: 40000000 00000000 c00c6409 ddba2828 ded5c777 00000001 00000000 ddba2400
0000000c ddc4930c ded60040 dd5a21c0 bfc9a600 c00c6409 c01661d4 bfc9a600
dd5a21c0 dd5a21c0 00000004 ddac6000 c016622d 00000000 ddea7030 dd5a21c0
Call Trace:
[<ded5c777>] ds_ioctl+0x88b/0x89f [pcmcia]
[<c01661d4>] do_ioctl+0x64/0x6d
[<c016622d>] vfs_ioctl+0x50/0x27b
[<c016648c>] sys_ioctl+0x34/0x50
[<c0102eae>] sysenter_past_esp+0x5f/0x85
=======================
Code: 3f e1 89 d8 e8 f6 7e b1 ff 31 c0 5b c3 55 57 56 53 89 d7 9c 5d fa 89 e2
81 e2 00 e0 ff ff 83 42 14 01 8b 90 44 01 00 00 8d 5a f0 <8b> 4b 10 0f 18 01
90 8d b0 44 01 00 00 39 d6 75 12 eb 37 89 c8
EIP: [<ded5bc12>] get_pcmcia_device+0x1e/0x93 [pcmcia] SS:ESP 0068:ddac7f30
<6>note: cardmgr[4807] exited with preempt_count 1
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0xa0000000-0xa0ffffff: clean.
When running without debug options enabled also these were seen amongst dmesg
lines:
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 5131 using kernel context 0
When debug options were enabled these above disappeared. System info:
Linux orion 2.6.19-rc2-mm2 #2 PREEMPT Fri Oct 20 13:14:25 CEST 2006 i686
Intel(R) Pentium(R) 4 CPU 2.40GHz GNU/Linux
Gnu C 4.1.1
Gnu make 3.81
binutils 2.16.1
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.39
pcmcia-cs 3.2.8
nfs-utils 1.0.6
Linux C Library > libc.2.4
Dynamic linker (ldd) 2.4
Procps 3.2.6
Net-tools 1.60
Kbd 1.12
Sh-utils 5.94
udev 087
Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
yenta_socket rsrc_nonstatic pcmcia_core
This time it _is_ -mm ;-)
Regards,
Mariusz Kozlowski
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 11:39 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
@ 2006-10-20 13:32 ` Anton Vorontsov
2006-10-20 14:57 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
2006-10-20 16:19 ` 2.6.19-rc2-mm2 Andrew Morton
1 sibling, 1 reply; 51+ messages in thread
From: Anton Vorontsov @ 2006-10-20 13:32 UTC (permalink / raw)
To: Mariusz Kozlowski; +Cc: Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 455 bytes --]
Hi,
On Fri, Oct 20, 2006 at 01:39:49PM +0200, Mariusz Kozlowski wrote:
> Hello,
>
> I installed 2.6.19-rc2-mm2 without kernel debugging options enabled first.
> The output below is what I saw when the kernel started. Then I enabled
> debugging and system hangs with oops with no trace in the logs. It is not
> easily repeatable though. It happens from time to time.
>
Is that patch helps?
> Regards,
>
> Mariusz Kozlowski
-- Anton (irc: bd2)
[-- Attachment #2: pcmcia-fix.patch --]
[-- Type: text/plain, Size: 861 bytes --]
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 9ad18e6..72d92b4 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -601,6 +601,10 @@ static int ds_ioctl(struct inode * inode
ret = CS_BAD_ARGS;
else {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
+ if (!p_dev) {
+ err = -ENODEV;
+ break;
+ }
ret = pccard_get_configuration_info(s, p_dev, &buf->config);
pcmcia_put_dev(p_dev);
}
@@ -632,6 +636,10 @@ static int ds_ioctl(struct inode * inode
ret = CS_BAD_ARGS;
else {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
+ if (!p_dev) {
+ err = -ENODEV;
+ break;
+ }
ret = pccard_get_status(s, p_dev, &buf->status);
pcmcia_put_dev(p_dev);
}
^ permalink raw reply related [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 13:32 ` 2.6.19-rc2-mm2 Anton Vorontsov
@ 2006-10-20 14:57 ` Mariusz Kozlowski
0 siblings, 0 replies; 51+ messages in thread
From: Mariusz Kozlowski @ 2006-10-20 14:57 UTC (permalink / raw)
To: cbou; +Cc: Andrew Morton, linux-kernel
Hi,
> > I installed 2.6.19-rc2-mm2 without kernel debugging options enabled
> > first. The output below is what I saw when the kernel started. Then I
> > enabled debugging and system hangs with oops with no trace in the logs.
> > It is not easily repeatable though. It happens from time to time.
>
> Is that patch helps?
Sorry but it did not help. Both errors (pcmcia ioctl and drm) are still there.
It is hard to trigger these errors when debugging is enabled. I did something
like 10 or more reboots with no error seen. When I recompiled the kernel
without debugging support almost every reboot triggers error. The good thing
is that beside these errors system is usable and wifi works just fine.
Regards,
Mariusz Kozlowski
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 11:39 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
2006-10-20 13:32 ` 2.6.19-rc2-mm2 Anton Vorontsov
@ 2006-10-20 16:19 ` Andrew Morton
2006-10-20 16:54 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
1 sibling, 1 reply; 51+ messages in thread
From: Andrew Morton @ 2006-10-20 16:19 UTC (permalink / raw)
To: Mariusz Kozlowski; +Cc: linux-kernel
On Fri, 20 Oct 2006 13:39:49 +0200
Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:
> Hello,
>
> I installed 2.6.19-rc2-mm2 without kernel debugging options enabled first.
> The output below is what I saw when the kernel started. Then I enabled
> debugging and system hangs with oops with no trace in the logs. It is not
> easily repeatable though. It happens from time to time.
>
> BUG: unable to handle kernel NULL pointer dereference at virtual address
> 00000000
> printing eip:
> ded5bc12
> *pde = 00000000
> Oops: 0000 [#1]
> PREEMPT
> last sysfs
> file: /class/pcmcia_socket/pcmcia_socket0/available_resources_setup_done
> Modules linked in: pcmcia firmware_class yenta_socket rsrc_nonstatic
> pcmcia_core
> CPU: 0
> EIP: 0060:[<ded5bc12>] Not tainted VLI
> EFLAGS: 00010002 (2.6.19-rc2-mm2 #1)
> EIP is at get_pcmcia_device+0x1e/0x93 [pcmcia]
> eax: ddba2828 ebx: fffffff0 ecx: 00000000 edx: 00000000
> esi: 00000000 edi: 00000000 ebp: 00000246 esp: ddac7f30
> ds: 007b es: 007b ss: 0068
> Process cardmgr (pid: 4807, ti=ddac6000 task=ddea7030 task.ti=ddac6000)
> Stack: 40000000 00000000 c00c6409 ddba2828 ded5c777 00000001 00000000 ddba2400
> 0000000c ddc4930c ded60040 dd5a21c0 bfc9a600 c00c6409 c01661d4 bfc9a600
> dd5a21c0 dd5a21c0 00000004 ddac6000 c016622d 00000000 ddea7030 dd5a21c0
> Call Trace:
> [<ded5c777>] ds_ioctl+0x88b/0x89f [pcmcia]
> [<c01661d4>] do_ioctl+0x64/0x6d
> [<c016622d>] vfs_ioctl+0x50/0x27b
> [<c016648c>] sys_ioctl+0x34/0x50
> [<c0102eae>] sysenter_past_esp+0x5f/0x85
> =======================
> Code: 3f e1 89 d8 e8 f6 7e b1 ff 31 c0 5b c3 55 57 56 53 89 d7 9c 5d fa 89 e2
> 81 e2 00 e0 ff ff 83 42 14 01 8b 90 44 01 00 00 8d 5a f0 <8b> 4b 10 0f 18 01
> 90 8d b0 44 01 00 00 39 d6 75 12 eb 37 89 c8
> EIP: [<ded5bc12>] get_pcmcia_device+0x1e/0x93 [pcmcia] SS:ESP 0068:ddac7f30
> <6>note: cardmgr[4807] exited with preempt_count 1
> pccard: PCMCIA card inserted into slot 1
> cs: memory probe 0xa0000000-0xa0ffffff: clean.
Don't know. Nothing has changed in the git-pcmcia tree since July.
Are you able to bisect it, as per
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt ?
> When running without debug options enabled also these were seen amongst dmesg
> lines:
>
> [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
> [drm:drm_unlock] *ERROR* Process 5131 using kernel context 0
<googles>
This? http://lkml.org/lkml/2005/9/10/78
> When debug options were enabled these above disappeared. System info:
>
> Linux orion 2.6.19-rc2-mm2 #2 PREEMPT Fri Oct 20 13:14:25 CEST 2006 i686
> Intel(R) Pentium(R) 4 CPU 2.40GHz GNU/Linux
>
> Gnu C 4.1.1
> Gnu make 3.81
> binutils 2.16.1
> util-linux 2.12r
> mount 2.12r
> module-init-tools 3.2.2
> e2fsprogs 1.39
> pcmcia-cs 3.2.8
> nfs-utils 1.0.6
> Linux C Library > libc.2.4
> Dynamic linker (ldd) 2.4
> Procps 3.2.6
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 5.94
> udev 087
> Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
> yenta_socket rsrc_nonstatic pcmcia_core
>
> This time it _is_ -mm ;-)
>
Well... that's what it's for ;) Thanks for testing.
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 16:19 ` 2.6.19-rc2-mm2 Andrew Morton
@ 2006-10-20 16:54 ` Mariusz Kozlowski
2006-10-20 17:25 ` 2.6.19-rc2-mm2 Andrew Morton
0 siblings, 1 reply; 51+ messages in thread
From: Mariusz Kozlowski @ 2006-10-20 16:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hello,
> Don't know. Nothing has changed in the git-pcmcia tree since July.
>
> Are you able to bisect it, as per
> http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt ?
>
> > When running without debug options enabled also these were seen amongst
> > dmesg lines:
> >
> > [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
> > [drm:drm_unlock] *ERROR* Process 5131 using kernel context 0
>
> <googles>
>
> This? http://lkml.org/lkml/2005/9/10/78
I think I found the culprit. It's CONFIG_PCI_MULTITHREAD_PROBE option. It is
actually marked as EXPERIMENTAL and there is even a proper warning included
on the help page. Disabling it makes the kernel behave the right way. So
should what I reported be considered a real error or not? Then the next
question is should I report errors caused by options marked as EXPERIMENTAL
or just leave it the way it is until the option is not EXPERIMENTAL anymore?
>> This time it _is_ -mm ;-)
>>
>Well... that's what it's for ;) Thanks for testing.
No problem. Thanks for Linux.
Regards,
Mariusz Kozlowski
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 16:54 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
@ 2006-10-20 17:25 ` Andrew Morton
2006-10-20 22:37 ` 2.6.19-rc2-mm2 Matthew Frost
` (2 more replies)
0 siblings, 3 replies; 51+ messages in thread
From: Andrew Morton @ 2006-10-20 17:25 UTC (permalink / raw)
To: Mariusz Kozlowski; +Cc: linux-kernel, Dave Airlie, Greg KH
On Fri, 20 Oct 2006 18:54:43 +0200
Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:
> Hello,
>
> > Don't know. Nothing has changed in the git-pcmcia tree since July.
> >
> > Are you able to bisect it, as per
> > http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt ?
> >
> > > When running without debug options enabled also these were seen amongst
> > > dmesg lines:
> > >
> > > [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
> > > [drm:drm_unlock] *ERROR* Process 5131 using kernel context 0
> >
> > <googles>
> >
> > This? http://lkml.org/lkml/2005/9/10/78
>
> I think I found the culprit. It's CONFIG_PCI_MULTITHREAD_PROBE option. It is
> actually marked as EXPERIMENTAL and there is even a proper warning included
> on the help page. Disabling it makes the kernel behave the right way. So
> should what I reported be considered a real error or not? Then the next
> question is should I report errors caused by options marked as EXPERIMENTAL
> or just leave it the way it is until the option is not EXPERIMENTAL anymore?
Ow. Multithreaded probing was probably a bt ambitious, given the current
status of kernel startup..
Greg, does it actually speed anything up or anything else good?
As for what to do about it: tell David ;) I'm not sure that he'll be
super-motivated about it though.
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 17:25 ` 2.6.19-rc2-mm2 Andrew Morton
@ 2006-10-20 22:37 ` Matthew Frost
2006-10-21 0:16 ` 2.6.19-rc2-mm2 Andi Kleen
2006-10-21 0:48 ` 2.6.19-rc2-mm2 Greg KH
2006-10-23 7:58 ` 2.6.19-rc2-mm2 Cornelia Huck
2 siblings, 1 reply; 51+ messages in thread
From: Matthew Frost @ 2006-10-20 22:37 UTC (permalink / raw)
To: Andrew Morton; +Cc: Mariusz Kozlowski, linux-kernel, Dave Airlie, Greg KH
Andrew Morton wrote:
> Ow. Multithreaded probing was probably a bt ambitious, given the current
> status of kernel startup..
>
> Greg, does it actually speed anything up or anything else good?
>
I'm on a x86 (P4) hi-mem machine, plenty of onboard PCI (audio, LAN, bonus IDE
controller, etc.), and it has sped up my boot process. Between the USB and PCI
multithread probing, my dmesg is a bit out of order from its ordinary sequence,
but the only things that stall it now are my MD-RAID partitions getting set up.
As far as my mileage, it does speed up performance, but I'm bog-standard and
boring as far as x86 hardware goes. Obviously, not for everybody.
Thanks!
Matt Frost
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 22:37 ` 2.6.19-rc2-mm2 Matthew Frost
@ 2006-10-21 0:16 ` Andi Kleen
2006-10-21 0:50 ` 2.6.19-rc2-mm2 Greg KH
2006-10-22 0:34 ` 2.6.19-rc2-mm2 Matthew Frost
0 siblings, 2 replies; 51+ messages in thread
From: Andi Kleen @ 2006-10-21 0:16 UTC (permalink / raw)
To: artusemrys; +Cc: Mariusz Kozlowski, linux-kernel, Dave Airlie, Greg KH, akpm
Matthew Frost <artusemrys@sbcglobal.net> writes:
> Andrew Morton wrote:
>
> > Ow. Multithreaded probing was probably a bt ambitious, given the current
> > status of kernel startup..
> >
> > Greg, does it actually speed anything up or anything else good?
> >
>
> I'm on a x86 (P4) hi-mem machine, plenty of onboard PCI (audio, LAN, bonus IDE
> controller, etc.), and it has sped up my boot process. Between the USB and PCI
> multithread probing, my dmesg is a bit out of order from its ordinary sequence,
> but the only things that stall it now are my MD-RAID partitions getting set up.
Did you measure it? Feelings and impressions tend to be unreliable.
-Andi
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-21 0:16 ` 2.6.19-rc2-mm2 Andi Kleen
@ 2006-10-21 0:50 ` Greg KH
2006-10-21 2:13 ` 2.6.19-rc2-mm2 Andi Kleen
2006-10-22 0:34 ` 2.6.19-rc2-mm2 Matthew Frost
1 sibling, 1 reply; 51+ messages in thread
From: Greg KH @ 2006-10-21 0:50 UTC (permalink / raw)
To: Andi Kleen; +Cc: artusemrys, Mariusz Kozlowski, linux-kernel, Dave Airlie, akpm
On Sat, Oct 21, 2006 at 02:16:28AM +0200, Andi Kleen wrote:
> Matthew Frost <artusemrys@sbcglobal.net> writes:
>
> > Andrew Morton wrote:
> >
> > > Ow. Multithreaded probing was probably a bt ambitious, given the current
> > > status of kernel startup..
> > >
> > > Greg, does it actually speed anything up or anything else good?
> > >
> >
> > I'm on a x86 (P4) hi-mem machine, plenty of onboard PCI (audio, LAN, bonus IDE
> > controller, etc.), and it has sped up my boot process. Between the USB and PCI
> > multithread probing, my dmesg is a bit out of order from its ordinary sequence,
> > but the only things that stall it now are my MD-RAID partitions getting set up.
>
> Did you measure it? Feelings and impressions tend to be unreliable.
Yeah, real numbers would be good to have. I have measured 7-8 seconds
off the boot on my workstation, and 2 seconds off the boot for my
laptop. All of the time saved seems to be due to slow SATA startup
times, and the machine is off initializing other things while that is
happening.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-21 0:50 ` 2.6.19-rc2-mm2 Greg KH
@ 2006-10-21 2:13 ` Andi Kleen
2006-10-21 3:55 ` 2.6.19-rc2-mm2 Greg KH
0 siblings, 1 reply; 51+ messages in thread
From: Andi Kleen @ 2006-10-21 2:13 UTC (permalink / raw)
To: Greg KH; +Cc: artusemrys, Mariusz Kozlowski, linux-kernel, Dave Airlie, akpm
> Yeah, real numbers would be good to have. I have measured 7-8 seconds
> off the boot on my workstation, and 2 seconds off the boot for my
> laptop. All of the time saved seems to be due to slow SATA startup
> times, and the machine is off initializing other things while that is
> happening.
So perhaps it would be a safer strategy to just run the SATA probing in the
background and keep the rest serialized?
-Andi
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-21 2:13 ` 2.6.19-rc2-mm2 Andi Kleen
@ 2006-10-21 3:55 ` Greg KH
0 siblings, 0 replies; 51+ messages in thread
From: Greg KH @ 2006-10-21 3:55 UTC (permalink / raw)
To: Andi Kleen; +Cc: artusemrys, Mariusz Kozlowski, linux-kernel, Dave Airlie, akpm
On Sat, Oct 21, 2006 at 04:13:40AM +0200, Andi Kleen wrote:
>
> > Yeah, real numbers would be good to have. I have measured 7-8 seconds
> > off the boot on my workstation, and 2 seconds off the boot for my
> > laptop. All of the time saved seems to be due to slow SATA startup
> > times, and the machine is off initializing other things while that is
> > happening.
>
> So perhaps it would be a safer strategy to just run the SATA probing in the
> background and keep the rest serialized?
That would work for my machines, but what about everyone else? SCSI
should also be faster, and perhaps other PCI drivers that take a while
in initialization.
Anyway, it does help some people out.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-21 0:16 ` 2.6.19-rc2-mm2 Andi Kleen
2006-10-21 0:50 ` 2.6.19-rc2-mm2 Greg KH
@ 2006-10-22 0:34 ` Matthew Frost
1 sibling, 0 replies; 51+ messages in thread
From: Matthew Frost @ 2006-10-22 0:34 UTC (permalink / raw)
To: Andi Kleen; +Cc: Mariusz Kozlowski, linux-kernel, Dave Airlie, Greg KH, akpm
(This time to everybody)
Andi Kleen wrote:
> Matthew Frost <artusemrys@sbcglobal.net> writes:
>
>> Andrew Morton wrote:
>>
>>> Ow. Multithreaded probing was probably a bt ambitious, given the current
>>> status of kernel startup..
>>>
>>> Greg, does it actually speed anything up or anything else good?
>>>
>> I'm on a x86 (P4) hi-mem machine, plenty of onboard PCI (audio, LAN, bonus IDE
>> controller, etc.), and it has sped up my boot process. Between the USB and PCI
>> multithread probing, my dmesg is a bit out of order from its ordinary sequence,
>> but the only things that stall it now are my MD-RAID partitions getting set up.
>
> Did you measure it? Feelings and impressions tend to be unreliable.
>
I'll do some testing apples to apples-with-multithreaded-probing. Will return
with numbers to see whether it's my subjective impression or really faster.
> -Andi
>
Matt
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 17:25 ` 2.6.19-rc2-mm2 Andrew Morton
2006-10-20 22:37 ` 2.6.19-rc2-mm2 Matthew Frost
@ 2006-10-21 0:48 ` Greg KH
2006-10-23 7:58 ` 2.6.19-rc2-mm2 Cornelia Huck
2 siblings, 0 replies; 51+ messages in thread
From: Greg KH @ 2006-10-21 0:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: Mariusz Kozlowski, linux-kernel, Dave Airlie
On Fri, Oct 20, 2006 at 10:25:20AM -0700, Andrew Morton wrote:
> On Fri, 20 Oct 2006 18:54:43 +0200
> Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:
>
> > Hello,
> >
> > > Don't know. ? Nothing has changed in the git-pcmcia tree since July.
> > >
> > > Are you able to bisect it, as per
> > > http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt ?
> > >
> > > > When running without debug options enabled also these were seen amongst
> > > > dmesg lines:
> > > >
> > > > [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
> > > > [drm:drm_unlock] *ERROR* Process 5131 using kernel context 0
> > >
> > > <googles>
> > >
> > > This? http://lkml.org/lkml/2005/9/10/78
> >
> > I think I found the culprit. It's CONFIG_PCI_MULTITHREAD_PROBE option. It is
> > actually marked as EXPERIMENTAL and there is even a proper warning included
> > on the help page. Disabling it makes the kernel behave the right way. So
> > should what I reported be considered a real error or not? Then the next
> > question is should I report errors caused by options marked as EXPERIMENTAL
> > or just leave it the way it is until the option is not EXPERIMENTAL anymore?
>
> Ow. Multithreaded probing was probably a bt ambitious, given the current
> status of kernel startup..
>
> Greg, does it actually speed anything up or anything else good?
Yes, it does speed up some people's boxes. It's also found a few nice
race conditions that we need to fix up no matter what (MSI
initialization, dvb borkage, etc.)
But it is still quite experimental, hence the wording in the config
option.
Note that the next opensuse release will have this enabled, but it has
to have a kernel command line option added by the user in order for it
to be enabled. It should get a lot more testing that way.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 17:25 ` 2.6.19-rc2-mm2 Andrew Morton
2006-10-20 22:37 ` 2.6.19-rc2-mm2 Matthew Frost
2006-10-21 0:48 ` 2.6.19-rc2-mm2 Greg KH
@ 2006-10-23 7:58 ` Cornelia Huck
2006-10-24 7:40 ` 2.6.19-rc2-mm2 Greg KH
2 siblings, 1 reply; 51+ messages in thread
From: Cornelia Huck @ 2006-10-23 7:58 UTC (permalink / raw)
To: Andrew Morton; +Cc: Mariusz Kozlowski, linux-kernel, Dave Airlie, Greg KH
On Fri, 20 Oct 2006 10:25:20 -0700,
Andrew Morton <akpm@osdl.org> wrote:
> Ow. Multithreaded probing was probably a bt ambitious, given the current
> status of kernel startup..
IMHO, multithreaded probing as currently implemented doesn't look sane.
See http://marc.theaimsgroup.com/?l=linux-kernel&m=116108334418165&w=2
for my take on it...
--
Cornelia Huck
Linux for zSeries Developer
Tel.: +49-7031-16-4837, Mail: cornelia.huck@de.ibm.com
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-23 7:58 ` 2.6.19-rc2-mm2 Cornelia Huck
@ 2006-10-24 7:40 ` Greg KH
0 siblings, 0 replies; 51+ messages in thread
From: Greg KH @ 2006-10-24 7:40 UTC (permalink / raw)
To: Cornelia Huck; +Cc: Andrew Morton, Mariusz Kozlowski, linux-kernel, Dave Airlie
On Mon, Oct 23, 2006 at 09:58:40AM +0200, Cornelia Huck wrote:
> On Fri, 20 Oct 2006 10:25:20 -0700,
> Andrew Morton <akpm@osdl.org> wrote:
>
> > Ow. Multithreaded probing was probably a bt ambitious, given the current
> > status of kernel startup..
>
> IMHO, multithreaded probing as currently implemented doesn't look sane.
> See http://marc.theaimsgroup.com/?l=linux-kernel&m=116108334418165&w=2
> for my take on it...
Yes, I like your patches, they are in my queue still, hopefully I can
get to them soon, but will be in meetings for the next few days.
Hm, actually, I might be able to get some work done like this because I
will be in meetings :)
thanks for your patience,
greg k-h
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
2006-10-20 9:34 ` 2.6.19-rc2-mm2 Cornelia Huck
2006-10-20 11:39 ` 2.6.19-rc2-mm2 Mariusz Kozlowski
@ 2006-10-20 11:59 ` Gabriel C
2006-10-20 12:04 ` 2.6.19-rc2-mm2 Jiri Kosina
2006-10-20 15:34 ` [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build Hugh Dickins
` (8 subsequent siblings)
11 siblings, 1 reply; 51+ messages in thread
From: Gabriel C @ 2006-10-20 11:59 UTC (permalink / raw)
To: linux-kernel
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
>
Hello,
I got this on ' make silentoldconfig '
drivers/media/dvb/dvb-usb/Kconfig:72:warning: 'select' used by config
symbol 'DVB_USB_DIB0700' refer to undefined symbol 'DVB_DIB7000M'
Regards
Gabriel
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 11:59 ` 2.6.19-rc2-mm2 Gabriel C
@ 2006-10-20 12:04 ` Jiri Kosina
2006-10-20 12:33 ` 2.6.19-rc2-mm2 Gabriel C
2006-10-20 22:43 ` 2.6.19-rc2-mm2 Andrew Morton
0 siblings, 2 replies; 51+ messages in thread
From: Jiri Kosina @ 2006-10-20 12:04 UTC (permalink / raw)
To: Gabriel C; +Cc: linux-kernel
On Fri, 20 Oct 2006, Gabriel C wrote:
> I got this on ' make silentoldconfig '
> drivers/media/dvb/dvb-usb/Kconfig:72:warning: 'select' used by config
> symbol 'DVB_USB_DIB0700' refer to undefined symbol 'DVB_DIB7000M'
This is not a new warning, and should already be fixed for some two weeks
or so in the v4l-dvb tree.
--
Jiri Kosina
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 12:04 ` 2.6.19-rc2-mm2 Jiri Kosina
@ 2006-10-20 12:33 ` Gabriel C
2006-10-20 22:43 ` 2.6.19-rc2-mm2 Andrew Morton
1 sibling, 0 replies; 51+ messages in thread
From: Gabriel C @ 2006-10-20 12:33 UTC (permalink / raw)
To: Jiri Kosina; +Cc: linux-kernel
Jiri Kosina wrote:
> On Fri, 20 Oct 2006, Gabriel C wrote:
>
>
>> I got this on ' make silentoldconfig '
>> drivers/media/dvb/dvb-usb/Kconfig:72:warning: 'select' used by config
>> symbol 'DVB_USB_DIB0700' refer to undefined symbol 'DVB_DIB7000M'
>>
>
> This is not a new warning, and should already be fixed for some two weeks
> or so in the v4l-dvb tree.
>
>
Then sorry , for me was a new one I didn't notice it befor.
Gabriel
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 12:04 ` 2.6.19-rc2-mm2 Jiri Kosina
2006-10-20 12:33 ` 2.6.19-rc2-mm2 Gabriel C
@ 2006-10-20 22:43 ` Andrew Morton
2006-10-23 3:29 ` 2.6.19-rc2-mm2 Mauro Carvalho Chehab
1 sibling, 1 reply; 51+ messages in thread
From: Andrew Morton @ 2006-10-20 22:43 UTC (permalink / raw)
To: Jiri Kosina; +Cc: Gabriel C, linux-kernel
On Fri, 20 Oct 2006 14:04:09 +0200 (CEST)
Jiri Kosina <jikos@jikos.cz> wrote:
> On Fri, 20 Oct 2006, Gabriel C wrote:
>
> > I got this on ' make silentoldconfig '
> > drivers/media/dvb/dvb-usb/Kconfig:72:warning: 'select' used by config
> > symbol 'DVB_USB_DIB0700' refer to undefined symbol 'DVB_DIB7000M'
>
> This is not a new warning, and should already be fixed for some two weeks
> or so in the v4l-dvb tree.
The -mm tree includes the dvb/v4l tree. We've all been patiently waiting
for that warning to go away for a few weeks now.
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 22:43 ` 2.6.19-rc2-mm2 Andrew Morton
@ 2006-10-23 3:29 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 51+ messages in thread
From: Mauro Carvalho Chehab @ 2006-10-23 3:29 UTC (permalink / raw)
To: Andrew Morton; +Cc: Jiri Kosina, Gabriel C, linux-kernel
Em Sex, 2006-10-20 às 15:43 -0700, Andrew Morton escreveu:
> On Fri, 20 Oct 2006 14:04:09 +0200 (CEST)
> Jiri Kosina <jikos@jikos.cz> wrote:
>
> > On Fri, 20 Oct 2006, Gabriel C wrote:
> >
> > > I got this on ' make silentoldconfig '
> > > drivers/media/dvb/dvb-usb/Kconfig:72:warning: 'select' used by config
> > > symbol 'DVB_USB_DIB0700' refer to undefined symbol 'DVB_DIB7000M'
> >
> > This is not a new warning, and should already be fixed for some two weeks
> > or so in the v4l-dvb tree.
>
> The -mm tree includes the dvb/v4l tree. We've all been patiently waiting
> for that warning to go away for a few weeks now.
I've corrected it at the patches I sent to Linus. It seemed that I
forgot to apply a similar patch to -devel branch.
I've sent the proper fix to my -devel branch this weekend.
It should have solved this issue by adding the proper DIB7000M code.
Those patches will probably be included into kernel 2.6.20.
Cheers,
Mauro.
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (2 preceding siblings ...)
2006-10-20 11:59 ` 2.6.19-rc2-mm2 Gabriel C
@ 2006-10-20 15:34 ` Hugh Dickins
2006-10-20 17:59 ` Alan Cox
2006-10-20 19:52 ` Andy Whitcroft
2006-10-20 15:54 ` 2.6.19-rc2-mm2 Martin J. Bligh
` (7 subsequent siblings)
11 siblings, 2 replies; 51+ messages in thread
From: Hugh Dickins @ 2006-10-20 15:34 UTC (permalink / raw)
To: Andrew Morton; +Cc: Alan Cox, linux-kernel
Fix tty_ioctl.c compilation errors and warnings on PowerPC, coming from
the tty-switch-to-ktermios patches; and make its ktermios the same as
its termios (as the comment says).
Signed-off-by: Hugh Dickins <hugh@veritas.com>
---
drivers/char/tty_ioctl.c | 4 ++--
include/asm-generic/termios.h | 4 ++--
include/asm-powerpc/termbits.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
--- 2.6.19-rc2-mm2/drivers/char/tty_ioctl.c 2006-10-20 12:31:43.000000000 +0100
+++ linux/drivers/char/tty_ioctl.c 2006-10-20 13:34:29.000000000 +0100
@@ -495,8 +495,8 @@ static int get_sgttyb(struct tty_struct
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
- tmp.sg_ispeed = tty->c_ispeed;
- tmp.sg_ospeed = tty->c_ospeed;
+ tmp.sg_ispeed = tty->termios->c_ispeed;
+ tmp.sg_ospeed = tty->termios->c_ospeed;
tmp.sg_erase = tty->termios->c_cc[VERASE];
tmp.sg_kill = tty->termios->c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
--- 2.6.19-rc2-mm2/include/asm-generic/termios.h 2005-03-02 07:39:27.000000000 +0000
+++ linux/include/asm-generic/termios.h 2006-10-20 13:53:58.000000000 +0100
@@ -11,7 +11,7 @@
/*
* Translate a "termio" structure into a "termios". Ugh.
*/
-static inline int user_termio_to_kernel_termios(struct termios *termios,
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
struct termio __user *termio)
{
unsigned short tmp;
@@ -48,7 +48,7 @@ static inline int user_termio_to_kernel_
* Translate a "termios" structure into a "termio". Ugh.
*/
static inline int kernel_termios_to_user_termio(struct termio __user *termio,
- struct termios *termios)
+ struct ktermios *termios)
{
if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
--- 2.6.19-rc2-mm2/include/asm-powerpc/termbits.h 2006-10-20 12:31:49.000000000 +0100
+++ linux/include/asm-powerpc/termbits.h 2006-10-20 13:44:42.000000000 +0100
@@ -37,8 +37,8 @@ struct ktermios {
tcflag_t c_oflag; /* output mode flags */
tcflag_t c_cflag; /* control mode flags */
tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
};
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build
2006-10-20 15:34 ` [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build Hugh Dickins
@ 2006-10-20 17:59 ` Alan Cox
2006-10-20 19:52 ` Andy Whitcroft
1 sibling, 0 replies; 51+ messages in thread
From: Alan Cox @ 2006-10-20 17:59 UTC (permalink / raw)
To: Hugh Dickins; +Cc: Andrew Morton, Alan Cox, linux-kernel
On Fri, Oct 20, 2006 at 04:34:03PM +0100, Hugh Dickins wrote:
> Fix tty_ioctl.c compilation errors and warnings on PowerPC, coming from
> the tty-switch-to-ktermios patches; and make its ktermios the same as
> its termios (as the comment says).
>
> Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Alan Cox <alan@redhat.com>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build
2006-10-20 15:34 ` [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build Hugh Dickins
2006-10-20 17:59 ` Alan Cox
@ 2006-10-20 19:52 ` Andy Whitcroft
1 sibling, 0 replies; 51+ messages in thread
From: Andy Whitcroft @ 2006-10-20 19:52 UTC (permalink / raw)
To: Hugh Dickins; +Cc: Andrew Morton, Alan Cox, linux-kernel
Hugh Dickins wrote:
> Fix tty_ioctl.c compilation errors and warnings on PowerPC, coming from
> the tty-switch-to-ktermios patches; and make its ktermios the same as
> its termios (as the comment says).
>
> Signed-off-by: Hugh Dickins <hugh@veritas.com>
> ---
>
> drivers/char/tty_ioctl.c | 4 ++--
> include/asm-generic/termios.h | 4 ++--
> include/asm-powerpc/termbits.h | 2 +-
> 3 files changed, 5 insertions(+), 5 deletions(-)
>
> --- 2.6.19-rc2-mm2/drivers/char/tty_ioctl.c 2006-10-20 12:31:43.000000000 +0100
> +++ linux/drivers/char/tty_ioctl.c 2006-10-20 13:34:29.000000000 +0100
> @@ -495,8 +495,8 @@ static int get_sgttyb(struct tty_struct
> struct sgttyb tmp;
>
> mutex_lock(&tty->termios_mutex);
> - tmp.sg_ispeed = tty->c_ispeed;
> - tmp.sg_ospeed = tty->c_ospeed;
> + tmp.sg_ispeed = tty->termios->c_ispeed;
> + tmp.sg_ospeed = tty->termios->c_ospeed;
> tmp.sg_erase = tty->termios->c_cc[VERASE];
> tmp.sg_kill = tty->termios->c_cc[VKILL];
> tmp.sg_flags = get_sgflags(tty);
> --- 2.6.19-rc2-mm2/include/asm-generic/termios.h 2005-03-02 07:39:27.000000000 +0000
> +++ linux/include/asm-generic/termios.h 2006-10-20 13:53:58.000000000 +0100
> @@ -11,7 +11,7 @@
> /*
> * Translate a "termio" structure into a "termios". Ugh.
> */
> -static inline int user_termio_to_kernel_termios(struct termios *termios,
> +static inline int user_termio_to_kernel_termios(struct ktermios *termios,
> struct termio __user *termio)
> {
> unsigned short tmp;
> @@ -48,7 +48,7 @@ static inline int user_termio_to_kernel_
> * Translate a "termios" structure into a "termio". Ugh.
> */
> static inline int kernel_termios_to_user_termio(struct termio __user *termio,
> - struct termios *termios)
> + struct ktermios *termios)
> {
> if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
> put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
> --- 2.6.19-rc2-mm2/include/asm-powerpc/termbits.h 2006-10-20 12:31:49.000000000 +0100
> +++ linux/include/asm-powerpc/termbits.h 2006-10-20 13:44:42.000000000 +0100
> @@ -37,8 +37,8 @@ struct ktermios {
> tcflag_t c_oflag; /* output mode flags */
> tcflag_t c_cflag; /* control mode flags */
> tcflag_t c_lflag; /* local mode flags */
> - cc_t c_line; /* line discipline */
> cc_t c_cc[NCCS]; /* control characters */
> + cc_t c_line; /* line discipline (== c_cc[19]) */
> speed_t c_ispeed; /* input speed */
> speed_t c_ospeed; /* output speed */
> };
> -
Sorts booting for my ppc's.
Acked-by: Andy Whitcroft <apw@shadowen.org>
-apw
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (3 preceding siblings ...)
2006-10-20 15:34 ` [PATCH 2.6.19-rc2-mm2] fix tty_ioctl powerpc build Hugh Dickins
@ 2006-10-20 15:54 ` Martin J. Bligh
2006-10-20 16:30 ` 2.6.19-rc2-mm2 Badari Pulavarty
2006-10-22 2:16 ` 2.6.19-rc2-mm2 Martin J. Bligh
2006-10-21 0:24 ` 2.6.19-rc2-mm2 J.A. Magallón
` (6 subsequent siblings)
11 siblings, 2 replies; 51+ messages in thread
From: Martin J. Bligh @ 2006-10-20 15:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Andy Whitcroft, Badari Pulavarty
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>
> - I worked out the git magic to make the wireless tree work
> (git-wireless.patch). Hopefully it will be in -mm more often now.
I think the IO & fsx problems have got better, but this one is still
broken, at least.
See end of fsx runlog here:
http://test.kernel.org/abat/57486/debug/test.log.1
which looks like this:
Total Test PASSED: 79
Total Test FAILED: 3
139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w 2048
-Z -R -W test/junkfile
139 ./fsx-linux -N 10000 -o 128000 -r 2048 -w 4096 -Z -R -W test/junkfile
139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w 1024
-Z -R -W test/junkfile
Failed rc=1
10/20/06-02:41:55 command complete: (1) rc=1 (TEST FAIL)
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 15:54 ` 2.6.19-rc2-mm2 Martin J. Bligh
@ 2006-10-20 16:30 ` Badari Pulavarty
2006-10-20 17:31 ` 2.6.19-rc2-mm2 Andy Whitcroft
2006-10-22 2:16 ` 2.6.19-rc2-mm2 Martin J. Bligh
1 sibling, 1 reply; 51+ messages in thread
From: Badari Pulavarty @ 2006-10-20 16:30 UTC (permalink / raw)
To: Martin J. Bligh; +Cc: Andrew Morton, linux-kernel, Andy Whitcroft
Martin J. Bligh wrote:
> Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>>
>>
>> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>>
>> - I worked out the git magic to make the wireless tree work
>> (git-wireless.patch). Hopefully it will be in -mm more often now.
>
> I think the IO & fsx problems have got better, but this one is still
> broken, at least.
>
> See end of fsx runlog here:
>
> http://test.kernel.org/abat/57486/debug/test.log.1
>
> which looks like this:
>
> Total Test PASSED: 79
> Total Test FAILED: 3
> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w
> 2048 -Z -R -W test/junkfile
> 139 ./fsx-linux -N 10000 -o 128000 -r 2048 -w 4096 -Z -R -W
> test/junkfile
> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w
> 1024 -Z -R -W test/junkfile
> Failed rc=1
> 10/20/06-02:41:55 command complete: (1) rc=1 (TEST FAIL)
>
I see following message in the log which makes me think the reiserfs
tail handling with DIO problem...
Is this reiserfs ? Chris Mason told me that we need to use -onotail
mount option for this to pass.
Not sure why we haven't see this before...
doread: read: Invalid argument
Thanks,
Badari
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 16:30 ` 2.6.19-rc2-mm2 Badari Pulavarty
@ 2006-10-20 17:31 ` Andy Whitcroft
0 siblings, 0 replies; 51+ messages in thread
From: Andy Whitcroft @ 2006-10-20 17:31 UTC (permalink / raw)
To: Badari Pulavarty; +Cc: Martin J. Bligh, Andrew Morton, linux-kernel
Badari Pulavarty wrote:
> Martin J. Bligh wrote:
>> Andrew Morton wrote:
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>>>
>>>
>>> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>>>
>>> - I worked out the git magic to make the wireless tree work
>>> (git-wireless.patch). Hopefully it will be in -mm more often now.
>>
>> I think the IO & fsx problems have got better, but this one is still
>> broken, at least.
>>
>> See end of fsx runlog here:
>>
>> http://test.kernel.org/abat/57486/debug/test.log.1
>>
>> which looks like this:
>>
>> Total Test PASSED: 79
>> Total Test FAILED: 3
>> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w
>> 2048 -Z -R -W test/junkfile
>> 139 ./fsx-linux -N 10000 -o 128000 -r 2048 -w 4096 -Z -R -W
>> test/junkfile
>> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w
>> 1024 -Z -R -W test/junkfile
>> Failed rc=1
>> 10/20/06-02:41:55 command complete: (1) rc=1 (TEST FAIL)
>>
> I see following message in the log which makes me think the reiserfs
> tail handling with DIO problem...
> Is this reiserfs ? Chris Mason told me that we need to use -onotail
> mount option for this to pass.
> Not sure why we haven't see this before...
>
> doread: read: Invalid argument
/dev/sda1 / reiserfs rw 0 0
Yes, this is a reiserfs filesystem we are testing on. This is a new
machine and probabally the only one reporting to TKO with reiserfs as
its root filesystem.
Can you explain what difference this option makes, and why it is
changing the visible semantics of the filesystem? Is this valid?
-apw
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 15:54 ` 2.6.19-rc2-mm2 Martin J. Bligh
2006-10-20 16:30 ` 2.6.19-rc2-mm2 Badari Pulavarty
@ 2006-10-22 2:16 ` Martin J. Bligh
2006-10-22 3:15 ` 2.6.19-rc2-mm2 Dave Jones
` (2 more replies)
1 sibling, 3 replies; 51+ messages in thread
From: Martin J. Bligh @ 2006-10-22 2:16 UTC (permalink / raw)
To: Martin J. Bligh
Cc: Andrew Morton, linux-kernel, Andy Whitcroft, Badari Pulavarty,
Greg Kroah-Hartman
Martin J. Bligh wrote:
> Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>>
>>
>> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>>
>> - I worked out the git magic to make the wireless tree work
>> (git-wireless.patch). Hopefully it will be in -mm more often now.
>
> I think the IO & fsx problems have got better, but this one is still
> broken, at least.
>
> See end of fsx runlog here:
>
> http://test.kernel.org/abat/57486/debug/test.log.1
>
> which looks like this:
>
> Total Test PASSED: 79
> Total Test FAILED: 3
> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w 2048
> -Z -R -W test/junkfile
> 139 ./fsx-linux -N 10000 -o 128000 -r 2048 -w 4096 -Z -R -W test/junkfile
> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w 1024
> -Z -R -W test/junkfile
> Failed rc=1
> 10/20/06-02:41:55 command complete: (1) rc=1 (TEST FAIL)
On further examination ... and rather more worryingly, this started
between 2.6.18 and 2.6.18.1. I don't see any reiserfs patches in
there, and possibly it's a machine config change? But rather worrying.
Where do the changelogs for the stable release kernels sit again?
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-22 2:16 ` 2.6.19-rc2-mm2 Martin J. Bligh
@ 2006-10-22 3:15 ` Dave Jones
2006-10-22 3:24 ` 2.6.19-rc2-mm2 Randy Dunlap
2006-10-22 22:18 ` 2.6.19-rc2-mm2 Andy Whitcroft
2 siblings, 0 replies; 51+ messages in thread
From: Dave Jones @ 2006-10-22 3:15 UTC (permalink / raw)
To: Martin J. Bligh
Cc: Andrew Morton, linux-kernel, Andy Whitcroft, Badari Pulavarty,
Greg Kroah-Hartman
On Sat, Oct 21, 2006 at 07:16:46PM -0700, Martin J. Bligh wrote:
> On further examination ... and rather more worryingly, this started
> between 2.6.18 and 2.6.18.1. I don't see any reiserfs patches in
> there, and possibly it's a machine config change? But rather worrying.
>
> Where do the changelogs for the stable release kernels sit again?
Linked off the front page of www.kernel.org, like the others..
http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.18.1
Dave
--
http://www.codemonkey.org.uk
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-22 2:16 ` 2.6.19-rc2-mm2 Martin J. Bligh
2006-10-22 3:15 ` 2.6.19-rc2-mm2 Dave Jones
@ 2006-10-22 3:24 ` Randy Dunlap
2006-10-22 22:18 ` 2.6.19-rc2-mm2 Andy Whitcroft
2 siblings, 0 replies; 51+ messages in thread
From: Randy Dunlap @ 2006-10-22 3:24 UTC (permalink / raw)
To: Martin J. Bligh
Cc: Andrew Morton, linux-kernel, Andy Whitcroft, Badari Pulavarty,
Greg Kroah-Hartman
On Sat, 21 Oct 2006 19:16:46 -0700 Martin J. Bligh wrote:
> Martin J. Bligh wrote:
> > Andrew Morton wrote:
> >> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> >>
> >>
> >> - Added the IOAT tree as git-ioat.patch (Chris Leech)
> >>
> >> - I worked out the git magic to make the wireless tree work
> >> (git-wireless.patch). Hopefully it will be in -mm more often now.
> >
> > I think the IO & fsx problems have got better, but this one is still
> > broken, at least.
> >
> > See end of fsx runlog here:
> >
> > http://test.kernel.org/abat/57486/debug/test.log.1
> >
> > which looks like this:
> >
> > Total Test PASSED: 79
> > Total Test FAILED: 3
> > 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w 2048
> > -Z -R -W test/junkfile
> > 139 ./fsx-linux -N 10000 -o 128000 -r 2048 -w 4096 -Z -R -W test/junkfile
> > 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w 1024
> > -Z -R -W test/junkfile
> > Failed rc=1
> > 10/20/06-02:41:55 command complete: (1) rc=1 (TEST FAIL)
>
> On further examination ... and rather more worryingly, this started
> between 2.6.18 and 2.6.18.1. I don't see any reiserfs patches in
> there, and possibly it's a machine config change? But rather worrying.
>
> Where do the changelogs for the stable release kernels sit again?
duh, :) listed at www.kernel.org, points to
http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.18.1
---
~Randy
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-22 2:16 ` 2.6.19-rc2-mm2 Martin J. Bligh
2006-10-22 3:15 ` 2.6.19-rc2-mm2 Dave Jones
2006-10-22 3:24 ` 2.6.19-rc2-mm2 Randy Dunlap
@ 2006-10-22 22:18 ` Andy Whitcroft
2 siblings, 0 replies; 51+ messages in thread
From: Andy Whitcroft @ 2006-10-22 22:18 UTC (permalink / raw)
To: Martin J. Bligh
Cc: Andrew Morton, linux-kernel, Badari Pulavarty, Greg Kroah-Hartman
Martin J. Bligh wrote:
> Martin J. Bligh wrote:
>> Andrew Morton wrote:
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>>>
>>>
>>> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>>>
>>> - I worked out the git magic to make the wireless tree work
>>> (git-wireless.patch). Hopefully it will be in -mm more often now.
>>
>> I think the IO & fsx problems have got better, but this one is still
>> broken, at least.
>>
>> See end of fsx runlog here:
>>
>> http://test.kernel.org/abat/57486/debug/test.log.1
>>
>> which looks like this:
>>
>> Total Test PASSED: 79
>> Total Test FAILED: 3
>> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w
>> 2048 -Z -R -W test/junkfile
>> 139 ./fsx-linux -N 10000 -o 128000 -r 2048 -w 4096 -Z -R -W
>> test/junkfile
>> 139 ./fsx-linux -N 10000 -o 8192 -A -l 500000 -r 1024 -t 2048 -w
>> 1024 -Z -R -W test/junkfile
>> Failed rc=1
>> 10/20/06-02:41:55 command complete: (1) rc=1 (TEST FAIL)
>
> On further examination ... and rather more worryingly, this started
> between 2.6.18 and 2.6.18.1. I don't see any reiserfs patches in
> there, and possibly it's a machine config change? But rather worrying.
>
> Where do the changelogs for the stable release kernels sit again?
Ok, as has been said there are changes in the tests which make error
detection better, which means we cannot be sure this _is_ new. The
logical way to eliminate that is to rerun the 2.6.18 test again to see
if it gains the problem.
I'll queue one up.
-apw
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (4 preceding siblings ...)
2006-10-20 15:54 ` 2.6.19-rc2-mm2 Martin J. Bligh
@ 2006-10-21 0:24 ` J.A. Magallón
2006-10-21 0:37 ` 2.6.19-rc2-mm2 Jiri Kosina
2006-10-21 0:41 ` 2.6.19-rc2-mm2 Randy Dunlap
2006-10-21 17:30 ` 2.6.19-rc2-mm2: reproducible hang on shutdown on i386 Rafael J. Wysocki
` (5 subsequent siblings)
11 siblings, 2 replies; 51+ messages in thread
From: J.A. Magallón @ 2006-10-21 0:24 UTC (permalink / raw)
To: Andrew Morton, linux-kernel
On Fri, 20 Oct 2006 01:56:41 -0700, Andrew Morton <akpm@osdl.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
Stupid question: how can I build sunrpc as a module ?
My distro requires that, it tries to load it on initscripts to start
part of the nfs subsystem.
I have digged through menuconfig and gconfig and am not able to set SUNRPC=m,
it just gets autoselected y/n by other options.
TIA.
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.18-jam05 (gcc 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP PREEMPT
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-21 0:24 ` 2.6.19-rc2-mm2 J.A. Magallón
@ 2006-10-21 0:37 ` Jiri Kosina
2006-10-21 0:41 ` 2.6.19-rc2-mm2 Randy Dunlap
1 sibling, 0 replies; 51+ messages in thread
From: Jiri Kosina @ 2006-10-21 0:37 UTC (permalink / raw)
To: J.A. Magallón; +Cc: linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 658 bytes --]
On Sat, 21 Oct 2006, J.A. Magallón wrote:
> Stupid question: how can I build sunrpc as a module ? I have digged
> through menuconfig and gconfig and am not able to set SUNRPC=m, it just
> gets autoselected y/n by other options.
CONFIG_SUNRPC is set to the value to which you set CONFIG_NFS_FS - look at
option NFS_FS in fs/Kconfig:
config NFS_FS
tristate "NFS file system support"
depends on INET
select LOCKD
select SUNRPC
select NFS_ACL_SUPPORT if NFS_V3_ACL
So if you want sunrpc to be built as module, set CONFIG_NFS_FS "NFS
filesystem support" to M. It just works(tm).
--
Jiri Kosina
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-21 0:24 ` 2.6.19-rc2-mm2 J.A. Magallón
2006-10-21 0:37 ` 2.6.19-rc2-mm2 Jiri Kosina
@ 2006-10-21 0:41 ` Randy Dunlap
1 sibling, 0 replies; 51+ messages in thread
From: Randy Dunlap @ 2006-10-21 0:41 UTC (permalink / raw)
To: J.A. Magallón ; +Cc: Andrew Morton, linux-kernel
On Sat, 21 Oct 2006 02:24:38 +0200 J.A. Magallón wrote:
> On Fri, 20 Oct 2006 01:56:41 -0700, Andrew Morton <akpm@osdl.org> wrote:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> >
>
> Stupid question: how can I build sunrpc as a module ?
> My distro requires that, it tries to load it on initscripts to start
> part of the nfs subsystem.
>
> I have digged through menuconfig and gconfig and am not able to set SUNRPC=m,
> it just gets autoselected y/n by other options.
(I think, not absolutely sure:)
If everything that selects it is a module (=m), then it should
also be selected as =m. If anything that selects it =y, it will
also be =y.
---
~Randy
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2: reproducible hang on shutdown on i386
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (5 preceding siblings ...)
2006-10-21 0:24 ` 2.6.19-rc2-mm2 J.A. Magallón
@ 2006-10-21 17:30 ` Rafael J. Wysocki
2006-10-23 14:43 ` Rafael J. Wysocki
2006-10-22 13:32 ` [Nasty crash on boot] was Re: 2.6.19-rc2-mm2 Reuben Farrelly
` (4 subsequent siblings)
11 siblings, 1 reply; 51+ messages in thread
From: Rafael J. Wysocki @ 2006-10-21 17:30 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Friday, 20 October 2006 10:56, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>
> - I worked out the git magic to make the wireless tree work
> (git-wireless.patch). Hopefully it will be in -mm more often now.
[Margin note: bcm43xx doesn't work on my test boxes although it used to on one
of them, but I have to play with it a bit more.]
It looks like i386 cannot shut down cleanly with this kernel. On my test
boxes (2 of them) it hangs after killing all processes, 100% of the time.
Fortunately the console remains functional so I have used SysRq to
collect some traces (below).
Greetings,
Rafael
eth0: network connection down
SysRq : Show Regs
Pid: 0, comm: swapper
EIP: 0060:[<c0101af3>] CPU: 0
EIP is at default_idle+0x43/0x80
EFLAGS: 00000206 Not tainted (2.6.19-rc2-mm2 #3)
EAX: 000d64ad EBX: 00000800 ECX: 00000000 EDX: 00000000
ESI: 00099100 EDI: c042b000 EBP: c0481fd0 DS: 007b ES: 007b GS: 00d8
CR0: 8005003b CR2: b7e44ec0 CR3: 1fe90000 CR4: 000006d0
[<c0101b71>] cpu_idle+0x41/0x70
[<c0100617>] rest_init+0x37/0x40
[<c04827c8>] start_kernel+0x2c8/0x370
=======================
SysRq : HELP : loglevel0-8 reBoot show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount showBlockedTa
SysRq : Show Regs
Pid: 0, comm: swapper
EIP: 0060:[<c0101af3>] CPU: 0
EIP is at default_idle+0x43/0x80
EFLAGS: 00000202 Not tainted (2.6.19-rc2-mm2 #3)
EAX: 000e7e4d EBX: 00000800 ECX: 00000000 EDX: 00000000
ESI: 00099100 EDI: c042b000 EBP: c0481fd0 DS: 007b ES: 007b GS: 00d8
CR0: 8005003b CR2: b7e44ec0 CR3: 1fe90000 CR4: 000006d0
[<c0101b71>] cpu_idle+0x41/0x70
[<c0100617>] rest_init+0x37/0x40
[<c04827c8>] start_kernel+0x2c8/0x370
=======================
SysRq : HELP : loglevel0-8 reBoot show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount showBlockedTa
SysRq : Show Regs
Pid: 0, comm: swapper
EIP: 0060:[<c0101af3>] CPU: 0
EIP is at default_idle+0x43/0x80
EFLAGS: 00000202 Not tainted (2.6.19-rc2-mm2 #3)
EAX: 001016a9 EBX: 00000800 ECX: 00000000 EDX: 00000000
ESI: 00099100 EDI: c042b000 EBP: c0481fd0 DS: 007b ES: 007b GS: 00d8
CR0: 8005003b CR2: b7e44ec0 CR3: 1fe90000 CR4: 000006d0
[<c0101b71>] cpu_idle+0x41/0x70
[<c0100617>] rest_init+0x37/0x40
[<c04827c8>] start_kernel+0x2c8/0x370
=======================
SysRq : HELP : loglevel0-8 reBoot show-all-locks(D) tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount showBlockedTa
SysRq : Show Regs
Pid: 0, comm: swapper
EIP: 0060:[<c0101af3>] CPU: 0
EIP is at default_idle+0x43/0x80
EFLAGS: 00000202 Not tainted (2.6.19-rc2-mm2 #3)
EAX: 00107c2b EBX: 00000800 ECX: 00000000 EDX: 00000000
ESI: 00099100 EDI: c042b000 EBP: c0481fd0 DS: 007b ES: 007b GS: 00d8
CR0: 8005003b CR2: b7e44ec0 CR3: 1fe90000 CR4: 000006d0
[<c0101b71>] cpu_idle+0x41/0x70
[<c0100617>] rest_init+0x37/0x40
[<c04827c8>] start_kernel+0x2c8/0x370
=======================
SysRq : Show State
sibling
task PC pid father child younger older
init S C0136453 4336 1 0 2 (NOTLB)
dfb85b28 00000046 dfb85af8 c0136453 00000000 00000001 00000046 c04fa6e0
0000000a dfb83530 64fd9700 00000029 00000000 dfb83650 dfb85b28 c0124808
a048c3c0 00000000 00000282 dfb85b3c ffff8d89 00000000 dfb85b5c c033bd8a
Call Trace:
[<c033bd8a>] schedule_timeout+0x4a/0xc0
[<c0181e00>] do_select+0x490/0x590
[<c01820d6>] core_sys_select+0x1d6/0x300
[<c0182674>] sys_select+0xd4/0x190
[<c0103268>] syscall_call+0x7/0xb
[<0805d4b8>] 0x805d4b8
=======================
ksoftirqd/0 S 00000002 7208 2 1 3 (L-TLB)
dfb87fb8 00000046 00000000 00000002 c033b14b c04fc01c 2da57300 00000019
0000000a dfb82ab0 2da57300 00000019 00000000 dfb82bd0 00f42400 00000000
003d1581 00000000 dfb85ec4 fffffffc dfb85ec4 00000000 dfb87fc0 c0120a38
Call Trace:
[<c0120a38>] ksoftirqd+0xd8/0x100
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
watchdog/0 S 00000002 7252 3 1 4 2 (L-TLB)
dfb89fb4 00000046 00000000 00000002 c033b14b c013b641 104a5a00 00000028
00000001 dfb82030 45d1be00 0000002a 00000000 dfb82150 00000000 00000000
00026614 00000000 dfb89fc0 fffffffc dfb85ec8 00000000 dfb89fc0 c014cca6
Call Trace:
[<c014cca6>] watchdog+0x46/0x60
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
khelper S C033E335 6436 5 1 6 4 (L-TLB)
dfb9bf5c 00000046 dfbf2ab0 c033e335 00000282 dfb9bf38 c0136453 dfbef56c
00000004 dfbf2ab0 e28b6000 00000018 00000000 dfbf2bd0 c033e319 dfb9bf98
02bea45a 00000000 c012f143 dfbef564 dfbef56c dfbef534 dfb9bfc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kthread S C033E335 7084 6 1 31 5 (L-TLB)
dff41f5c 00000046 dfbf2030 c033e335 00000282 dff41f38 c0136453 dfbef4a0
0000000a dfbf2030 9d3959c8 00000016 00002471 dfbf2150 c033e319 dff41f98
00157b2c 00000000 c012f143 dfbef498 dfbef4a0 dfbef468 dff41fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kblockd/0 S C033E335 6692 31 6 32 (L-TLB)
dff07f5c 00000046 dfb34030 c033e335 00000282 dff07f38 c0136453 dffd723c
0000000a dfb34030 339b5400 00000019 00000000 dfb34150 c033e319 dff07f98
08c3ba7b 00000000 c012f143 dffd7234 dffd723c dffd7204 dff07fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kacpid S C033E335 5620 32 6 33 31 (L-TLB)
dff0bf5c 00000046 dff09530 c033e335 00000282 dff0bf38 c0136453 dffd7e30
00000009 dff09530 373c9e00 00000016 00000000 dff09650 c033e319 dff0bf98
009a954a 00000000 c012f143 dffd7e28 dffd7e30 dffd7df8 dff0bfc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kacpi_notify S C033E335 6784 33 6 130 32 (L-TLB)
dff0df5c 00000046 dff08ab0 c033e335 00000282 dff0df38 a8e1d055 00000016
0000000a dff08ab0 a8e1f9da 00000016 0020b2d7 dff08bd0 00001187 00000000
0020e40a 00000000 c012f143 dffd7d5c dffd7d64 dffd7d2c dff0dfc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
ksuspend_usbd S C033E335 7672 130 6 133 33 (L-TLB)
dff39f5c 00000046 dfb34ab0 c033e335 00000282 dff39f38 c0136453 dffc77d0
00000002 dfb34ab0 3a70ee29 0000000a 00000ca0 dfb34bd0 c033e319 dff39f98
00001c6d 00000000 c012f143 dffc77c8 dffc77d0 dffc7798 dff39fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
khubd S 00000296 5832 133 6 135 130 (L-TLB)
dff15ef8 00000046 c033e335 00000296 dff15ed0 c0136453 7c2659fd 0000000f
00000009 dfb2d530 7c2659fd 0000000f 014c0f8b dfb2d650 03d1da7d 00000000
278691df 00000000 00000001 dff15f94 00000000 00000002 dff15fc0 c02a7f0f
Call Trace:
[<c02a7f0f>] hub_thread+0x95f/0xf70
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kseriod S 00000282 6276 135 6 157 133 (L-TLB)
dff17f64 00000046 c033e335 00000282 dff17f3c c0136453 c03c4740 00000001
0000000a dfb15530 4e3af0c5 0000000b 00007763 dfb15650 dfb15530 c03c4740
05c0435c 00000000 00000001 dff17fa0 dfa67dfc dfa67dfc dff17fc0 c02b8821
Call Trace:
[<c02b8821>] serio_thread+0xf1/0x340
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
pdflush S 00000000 5808 157 6 158 135 (L-TLB)
dff31f98 00000046 00000000 00000000 00000000 dfb1c030 c033e372 00000000
0000000a dfb1c030 7fee9000 00000029 00000000 dfb1c150 00000001 00000046
0624565d 00000000 dfb85ed0 dff31fb0 dfb85ed0 00000000 dff31fc0 c0157c0a
Call Trace:
[<c0157c0a>] pdflush+0x8a/0x190
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
pdflush S 00000000 6160 158 6 159 157 (L-TLB)
dff3bf98 00000046 00000000 00000000 00000000 dfb25530 c033e372 00000000
0000000a dfb25530 ec4dd300 00000010 00000000 dfb25650 00000001 00000046
025fc3ab 00000000 dfb85ed0 dff3bfb0 dfb85ed0 00000000 dff3bfc0 c0157c0a
Call Trace:
[<c0157c0a>] pdflush+0x8a/0x190
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kswapd0 S 00000292 7632 159 6 160 158 (L-TLB)
dff13f18 00000046 c033e335 00000292 dff13ef0 c0136453 c03b0520 00000001
00000005 dfbfcab0 5132c504 0000000a 000006da dfbfcbd0 dfbfcab0 c03b0520
0000174c 00000000 00000001 fffffffc dfb85ec8 c03b0000 dff13fc0 c015ca8c
Call Trace:
[<c015ca8c>] kswapd+0x49c/0x4e0
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kprefetchd S 00000000 7276 160 6 161 159 (L-TLB)
dfb13f9c 00000046 00000000 00000000 dfb35530 c033e335 00000000 dfb35530
00000001 dfb35530 551a00a4 0000000a 00004aeb dfb35650 00000046 c03b0bc4
000068ad 00000000 dfb13f9c 00000000 00000001 00000000 dfb13fc0 c016a5a7
Call Trace:
[<c016a5a7>] kprefetchd+0x287/0x410
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
aio/0 S C033E335 7672 161 6 807 160 (L-TLB)
dfb29f5c 00000046 dfb2cab0 c033e335 00000282 dfb29f38 c0136453 dfb39a34
00000005 dfb2cab0 51f7b825 0000000a 00000dfa dfb2cbd0 c033e319 dfb29f98
00001b2e 00000000 c012f143 dfb39a2c dfb39a34 dfb399fc dfb29fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kpsmoused S C033E335 7672 807 6 1661 161 (L-TLB)
dfa61f5c 00000046 dfb24030 c033e335 00000282 dfa61f38 c0136453 dfed1b00
00000009 dfb24030 0bccbbf6 0000000b 00000d85 dfb24150 c033e319 dfa61f98
00001e8f 00000000 c012f143 dfed1af8 dfed1b00 dfed1ac8 dfa61fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
reiserfs/0 S C033E335 6852 1661 6 2674 807 (L-TLB)
df841f5c 00000046 dfef6030 c033e335 00000282 df841f38 c0136453 dfed1efc
0000000a dfef6030 635a1e00 0000001a 00000000 dfef6150 c033e319 df841f98
000c7ffb 00000000 c012f143 dfed1ef4 dfed1efc dfed1ec4 df841fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
khpsbpkt S C033E335 7284 2674 6 2803 1661 (L-TLB)
f74cbfb8 00000046 f74c4030 c033e335 f90db1ac f74cbf94 c0136453 f90db1ac
0000000a f74c4030 9554b8ff 0000000f 0000071f f74c4150 c033e319 f90db1a0
000184cd 00000000 c02d4493 fffffffc f7441de4 00000000 f74cbfc0 f9091805
Call Trace:
[<f9091805>] hpsbpkt_thread+0x85/0x90 [ieee1394]
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
knodemgrd_0 S F74C7F28 6260 2803 6 2826 2674 (L-TLB)
f74c7f54 00000046 00000246 f74c7f28 c0136453 f90a3334 9995029c 0000000f
00000009 f7477530 9995029c 0000000f 000fcbe3 f7477650 01695db0 00000000
0454a396 00000000 00000000 00000001 00000000 f7478000 f74c7fc0 f90973a9
Call Trace:
[<f90973a9>] nodemgr_host_thread+0x509/0xb00 [ieee1394]
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
pccardd S 00000000 7076 2826 6 2858 2803 (L-TLB)
df853f60 00000046 00000000 00000000 f7476030 c033e335 00000000 f7476030
00000009 f7476030 34be0970 0000000f 00001814 f7476150 00000046 f75af2b0
00052481 00000000 df853f60 f75af094 00000000 f75af2b0 df853fc0 f8f83275
Call Trace:
[<f8f83275>] pccardd+0x145/0x270 [pcmcia_core]
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
pccardd S 00000000 7288 2858 6 2863 2826 (L-TLB)
f75d5f60 00000046 00000000 00000000 dfee6ab0 c033e335 00000000 dfee6ab0
00000009 dfee6ab0 4ba3886d 0000000f 000014ce dfee6bd0 00000046 f7a4c7cc
00036604 00000000 f75d5f60 f7a4c5b0 00000000 f7a4c7cc f75d5fc0 f8f83275
Call Trace:
[<f8f83275>] pccardd+0x145/0x270 [pcmcia_core]
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
ac97/0 S C033E335 7592 2863 6 4743 2858 (L-TLB)
f75d3f5c 00000046 f74ff530 c033e335 00000282 f75d3f38 c0136453 f75d8308
00000009 f74ff530 4c1ae574 0000000f 00000ba0 f74ff650 c033e319 f75d3f98
000045cc 00000000 c012f143 f75d8300 f75d8308 f75d82d0 f75d3fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kauditd S C033E335 7204 4743 6 5003 2863 (L-TLB)
f733df74 00000046 dfa00ab0 c033e335 00000292 f733df50 c0136453 c03afa60
0000000a dfa00ab0 0a2afa00 00000012 00000000 dfa00bd0 c033e319 f733dfa4
00022dfe 00000000 c012f143 00000000 f733dfa4 00000000 f733dfc0 c0147d32
Call Trace:
[<c0147d32>] kauditd_thread+0x152/0x180
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
kondemand/0 S C033E335 6612 5003 6 4743 (L-TLB)
f7647f5c 00000046 f6500ab0 c033e335 00000282 f7647f38 c0136453 f6b3c170
0000000a f6500ab0 5c3b0c00 0000002a 00000000 f6500bd0 c033e319 f7647f98
009d83be 00000000 c012f143 f6b3c168 f6b3c170 f6b3c138 f7647fc0 c012c013
Call Trace:
[<c012c013>] worker_thread+0x123/0x150
[<c012ed23>] kthread+0xa3/0xd0
[<c0103657>] kernel_thread_helper+0x7/0x10
=======================
Showing all locks held in the system:
=============================================
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2: reproducible hang on shutdown on i386
2006-10-21 17:30 ` 2.6.19-rc2-mm2: reproducible hang on shutdown on i386 Rafael J. Wysocki
@ 2006-10-23 14:43 ` Rafael J. Wysocki
2006-10-23 17:34 ` Andrew Morton
0 siblings, 1 reply; 51+ messages in thread
From: Rafael J. Wysocki @ 2006-10-23 14:43 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Saturday, 21 October 2006 19:30, Rafael J. Wysocki wrote:
> On Friday, 20 October 2006 10:56, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> >
> > - Added the IOAT tree as git-ioat.patch (Chris Leech)
> >
> > - I worked out the git magic to make the wireless tree work
> > (git-wireless.patch). Hopefully it will be in -mm more often now.
>
> [Margin note: bcm43xx doesn't work on my test boxes although it used to on one
> of them, but I have to play with it a bit more.]
>
> It looks like i386 cannot shut down cleanly with this kernel. On my test
> boxes (2 of them) it hangs after killing all processes, 100% of the time.
I've carried out a binary search which shows that
add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
causes this to happen.
Greetings,
Rafael
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2: reproducible hang on shutdown on i386
2006-10-23 14:43 ` Rafael J. Wysocki
@ 2006-10-23 17:34 ` Andrew Morton
2006-10-23 21:00 ` Rafael J. Wysocki
0 siblings, 1 reply; 51+ messages in thread
From: Andrew Morton @ 2006-10-23 17:34 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel
> On Mon, 23 Oct 2006 16:43:31 +0200 "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> On Saturday, 21 October 2006 19:30, Rafael J. Wysocki wrote:
> > On Friday, 20 October 2006 10:56, Andrew Morton wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> > >
> > > - Added the IOAT tree as git-ioat.patch (Chris Leech)
> > >
> > > - I worked out the git magic to make the wireless tree work
> > > (git-wireless.patch). Hopefully it will be in -mm more often now.
> >
> > [Margin note: bcm43xx doesn't work on my test boxes although it used to on one
> > of them, but I have to play with it a bit more.]
> >
> > It looks like i386 cannot shut down cleanly with this kernel. On my test
> > boxes (2 of them) it hangs after killing all processes, 100% of the time.
>
> I've carried out a binary search which shows that
>
> add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
>
> causes this to happen.
Thanks. That patch had one bug - this will hopefully fi things up:
From: Jeff Dike <jdike@addtoit.com>
add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
in -mm causes UML to hang at shutdown - init is sitting in a select on the
initctl socket.
This patch fixes it for me.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
fs/proc/array.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff -puN fs/proc/array.c~add-process_session-helper-routine-deprecate-old-field-fix-warnings-fix fs/proc/array.c
--- a/fs/proc/array.c~add-process_session-helper-routine-deprecate-old-field-fix-warnings-fix
+++ a/fs/proc/array.c
@@ -388,7 +388,7 @@ static int do_task_stat(struct task_stru
stime = cputime_add(stime, sig->stime);
}
- signal_session(sig);
+ sid = signal_session(sig);
pgid = process_group(task);
ppid = rcu_dereference(task->real_parent)->tgid;
_
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2: reproducible hang on shutdown on i386
2006-10-23 17:34 ` Andrew Morton
@ 2006-10-23 21:00 ` Rafael J. Wysocki
0 siblings, 0 replies; 51+ messages in thread
From: Rafael J. Wysocki @ 2006-10-23 21:00 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Monday, 23 October 2006 19:34, Andrew Morton wrote:
> > On Mon, 23 Oct 2006 16:43:31 +0200 "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> > On Saturday, 21 October 2006 19:30, Rafael J. Wysocki wrote:
> > > On Friday, 20 October 2006 10:56, Andrew Morton wrote:
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> > > >
> > > > - Added the IOAT tree as git-ioat.patch (Chris Leech)
> > > >
> > > > - I worked out the git magic to make the wireless tree work
> > > > (git-wireless.patch). Hopefully it will be in -mm more often now.
> > >
> > > [Margin note: bcm43xx doesn't work on my test boxes although it used to on one
> > > of them, but I have to play with it a bit more.]
> > >
> > > It looks like i386 cannot shut down cleanly with this kernel. On my test
> > > boxes (2 of them) it hangs after killing all processes, 100% of the time.
> >
> > I've carried out a binary search which shows that
> >
> > add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
> >
> > causes this to happen.
>
> Thanks. That patch had one bug - this will hopefully fi things up:
>
> From: Jeff Dike <jdike@addtoit.com>
>
> add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
> in -mm causes UML to hang at shutdown - init is sitting in a select on the
> initctl socket.
>
> This patch fixes it for me.
>
> Signed-off-by: Jeff Dike <jdike@addtoit.com>
> Cc: Cedric Le Goater <clg@fr.ibm.com>
> Signed-off-by: Andrew Morton <akpm@osdl.org>
> ---
>
> fs/proc/array.c | 2 +-
> 1 files changed, 1 insertion(+), 1 deletion(-)
>
> diff -puN fs/proc/array.c~add-process_session-helper-routine-deprecate-old-field-fix-warnings-fix fs/proc/array.c
> --- a/fs/proc/array.c~add-process_session-helper-routine-deprecate-old-field-fix-warnings-fix
> +++ a/fs/proc/array.c
> @@ -388,7 +388,7 @@ static int do_task_stat(struct task_stru
> stime = cputime_add(stime, sig->stime);
> }
>
> - signal_session(sig);
> + sid = signal_session(sig);
> pgid = process_group(task);
> ppid = rcu_dereference(task->real_parent)->tgid;
>
> _
>
Yes, this fixes the issue. Thanks.
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
^ permalink raw reply [flat|nested] 51+ messages in thread
* [Nasty crash on boot] was Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (6 preceding siblings ...)
2006-10-21 17:30 ` 2.6.19-rc2-mm2: reproducible hang on shutdown on i386 Rafael J. Wysocki
@ 2006-10-22 13:32 ` Reuben Farrelly
2006-10-22 18:13 ` Andrew Morton
2006-10-23 20:54 ` 2.6.19-rc2-mm2 Magnus Määttä
` (3 subsequent siblings)
11 siblings, 1 reply; 51+ messages in thread
From: Reuben Farrelly @ 2006-10-22 13:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hi,
On 20/10/2006 6:56 PM, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>
> - I worked out the git magic to make the wireless tree work
> (git-wireless.patch). Hopefully it will be in -mm more often now.
I've just moved country so haven't had anything to test with recently, but built
up a 2.6.19-rc2-mm2 and it reliably fails to boot. I'm not sure quite what part
of the code has gone wrong here, although it blew up not long after ACPI stuff:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.19-rc2-mm2 ro root=/dev/md0 panic=60 console=ttyS0,57600 si
ngle
[Linux-bzImage, setup=0x1400, size=0x1ed62a]
initrd /initrd-2.6.19-rc2-mm2.img
[Linux-initrd @ 0x37eba000, 0x1359d9 bytes]
Linux version 2.6.19-rc2-mm2 (root@tornado.reub.net) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Fri Oct 20 23:19:53 EST 2006
Command line: ro root=/dev/md0 panic=60 console=ttyS0,57600 single
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f673000 (usable)
BIOS-e820: 000000003f673000 - 000000003f6e9000 (ACPI NVS)
BIOS-e820: 000000003f6e9000 - 000000003f6ec000 (usable)
BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data)
BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
end_pfn_map = 259840
DMI 2.3 present.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 259699
0: 259817 -> 259820
0: 259839 -> 259840
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 000000003f673000 - 000000003f6e9000
Nosave address range: 000000003f6ec000 - 000000003f6ff000
Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
PERCPU: Allocating 33152 bytes of per cpu data
Built 1 zonelists. Total pages: 253941
Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600 single
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 8192
... CHAINHASH_SIZE: 4096
memory used by lock dependency info: 1328 kB
per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1011960k/1039360k available (2543k kernel code, 25824k reserved, 1739k
data, 240k init)
Calibrating delay using timer specific routine.. 6007.52 BogoMIPS (lpj=12015059)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500398
Detected 12.500 MHz APIC timer.
lockdep: not fixing up alternatives.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.33 BogoMIPS (lpj=12000670)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 3000.118 MHz processor.
migration_cost=5
checking if image is initramfs... it is
Freeing initrd memory: 1238k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [1] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61bbd8 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: ffff810037eb6140 RSI: 0000000000000002 RDI: 0000000000000001
RBP: ffff81003f61bd18 R08: 0000000000000002 R09: 0000000000000002
R10: ffffffff8029d801 R11: ffffffff80269149 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff8057bb80 R15: ffffffff80727418
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff810037eb4040 0000000000000001 ffff81003f61bfc0 000000003f61bd40
ffffffff80267553 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [2] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61b7c8 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61b908 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f61b828 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [3] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61b3b8 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61b4f8 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f61b418 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [4] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61afa8 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61b0e8 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f61b008 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [5] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61ab98 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61acd8 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f61abf8 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [6] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61a788 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61a8c8 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f61a7e8 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [7] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f61a378 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61a4b8 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f61a3d8 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
[<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
[<ffffffff8028601f>] tasklet_action+0x6b/0xc0
[<ffffffff8021173a>] __do_softirq+0x6f/0xf5
[<ffffffff8025deec>] call_softirq+0x1c/0x30
[<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
[<ffffe04480f76600>]
DWARF2 unwinder stuck at 0xffffe04480f76600
Leftover inexact backtrace:
Unable to handle kernel paging request at ffffffff82800000 RIP:
[<ffffffff80267849>] dump_trace+0x3a9/0x422
PGD 203027 PUD 205027 PMD 0
Oops: 0000 [8] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
RSP: 0000:ffff81003f619f68 EFLAGS: 00010006
RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
RDX: 0000000000000000 RSI: 0000000000000020 RDI: e203a5a4e203a4a4
RBP: ffff81003f61a0a8 R08: ffff8100817a8e00 R09: 0000000000000003
R10: ffffffff802168d0 R11: 0000000000000000 R12: ffffffff827ffff9
R13: ffff81003f61bfc0 R14: ffffffff80579ce0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
Stack: ffff81003f619fc8 0000000000000001 ffff81003f61bfc0 0000000000000011
ffff81003f617fc0 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
Call Trace:
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff802678fe>] show_trace+0x3c/0x55
[<ffffffff80267a1f>] _show_stack+0xef/0xfe
[<ffffffff80267abc>] show_registers+0x8e/0x103
[<ffffffff80267c7e>] __die+0xa0/0xda
[<ffffffff8020adbb>] do_page_fault+0x7bb/0x8ce
[<ffffffff8026352d>] error_exit+0x0/0x96
[<ffffffff80267849>] dump_trace+0x3a9/0x422
[<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
[<ffffffff80296de0>] save_trace+0x50/0xf3
[<ffffffff802980c2>] mark_lock+0x82/0x5ba
[<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
[<ffffffff802997d0>] lock_acquire+0x4f/0x6f
[<ffffffff80262f82>] _spin_lock+0x25/0x34
[<ffffffff802bfb18>] cache_flusharray+0x47/0x115
[<ffffffff8020b381>] kfree+0xe1/0x120
[<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
[<ffffffff802470ac>] __put_task_struct+0xb5/0x109
[<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
[<ffffffff80290898>] __rcu_proces
Box is a 3.0GHZ x86_64 with 1GB DRAM built with Fedora Core rawhide.
2.6.19-rc1-mm1 is the last release that works OK and is stable for me, but I
haven't tested any releases between that and this one. If it's useful I can
spend some time on this trying it out this week.
Reuben
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: [Nasty crash on boot] was Re: 2.6.19-rc2-mm2
2006-10-22 13:32 ` [Nasty crash on boot] was Re: 2.6.19-rc2-mm2 Reuben Farrelly
@ 2006-10-22 18:13 ` Andrew Morton
2006-10-22 22:37 ` Andi Kleen
0 siblings, 1 reply; 51+ messages in thread
From: Andrew Morton @ 2006-10-22 18:13 UTC (permalink / raw)
To: Reuben Farrelly; +Cc: linux-kernel, Ingo Molnar, Jan Beulich, Andi Kleen
On Sun, 22 Oct 2006 23:32:56 +1000
Reuben Farrelly <reuben-lkml@reub.net> wrote:
> Hi,
>
> On 20/10/2006 6:56 PM, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> >
> > - Added the IOAT tree as git-ioat.patch (Chris Leech)
> >
> > - I worked out the git magic to make the wireless tree work
> > (git-wireless.patch). Hopefully it will be in -mm more often now.
>
> I've just moved country so haven't had anything to test with recently, but built
> up a 2.6.19-rc2-mm2 and it reliably fails to boot. I'm not sure quite what part
> of the code has gone wrong here, although it blew up not long after ACPI stuff:
>
> ...
>
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> Unable to handle kernel paging request at ffffffff82800000 RIP:
> [<ffffffff80267849>] dump_trace+0x3a9/0x422
> PGD 203027 PUD 205027 PMD 0
> Oops: 0000 [1] SMP
> last sysfs file:
> CPU 1
> Modules linked in:
> Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
> RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
> RSP: 0000:ffff81003f61bbd8 EFLAGS: 00010006
> RAX: 0000000000000000 RBX: e203a5a4e203a4a4 RCX: ffffffff805831a0
> RDX: ffff810037eb6140 RSI: 0000000000000002 RDI: 0000000000000001
> RBP: ffff81003f61bd18 R08: 0000000000000002 R09: 0000000000000002
> R10: ffffffff8029d801 R11: ffffffff80269149 R12: ffffffff827ffff9
> R13: ffff81003f61bfc0 R14: ffffffff8057bb80 R15: ffffffff80727418
> FS: 0000000000000000(0000) GS:ffff81003f6eb398(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: ffffffff82800000 CR3: 0000000000201000 CR4: 00000000000006e0
> Process ksoftirqd/1 (pid: 5, threadinfo ffff81003f610000, task ffff810037eb6140)
> Stack: ffff810037eb4040 0000000000000001 ffff81003f61bfc0 000000003f61bd40
> ffffffff80267553 ffffffff80689180 ffffffff804a5074 ffffffff80285ed2
> 0000000000000001 ffff81003f601c40 00001025048b4865 0000000000000246
> Call Trace:
> [<ffffffff8026c7f7>] save_stack_trace+0x22/0x3e
> [<ffffffff80296de0>] save_trace+0x50/0xf3
> [<ffffffff802980c2>] mark_lock+0x82/0x5ba
> [<ffffffff80298fef>] __lock_acquire+0x43f/0xbd1
> [<ffffffff802997d0>] lock_acquire+0x4f/0x6f
> [<ffffffff80262f82>] _spin_lock+0x25/0x34
> [<ffffffff802bfb18>] cache_flusharray+0x47/0x115
> [<ffffffff8020b381>] kfree+0xe1/0x120
> [<ffffffff80344320>] selinux_task_free_security+0x1e/0x20
> [<ffffffff802470ac>] __put_task_struct+0xb5/0x109
> [<ffffffff802842fe>] delayed_put_task_struct+0x21/0x23
> [<ffffffff80290898>] __rcu_process_callbacks+0x162/0x1ed
> [<ffffffff80290946>] rcu_process_callbacks+0x23/0x44
> [<ffffffff8028601f>] tasklet_action+0x6b/0xc0
> [<ffffffff8021173a>] __do_softirq+0x6f/0xf5
> [<ffffffff8025deec>] call_softirq+0x1c/0x30
> [<ffffffff80285ed2>] ksoftirqd+0x0/0xb9
> [<ffffe04480f76600>]
> DWARF2 unwinder stuck at 0xffffe04480f76600
> Leftover inexact backtrace:
> Unable to handle kernel paging request at ffffffff82800000 RIP:
> [<ffffffff80267849>] dump_trace+0x3a9/0x422
>
lockdep was trying to record the call trace but the unwinder oopsed.
Try disabling CONFIG_LOCKDEP and/or CONFIG_STACK_UNWIND.
>
> Box is a 3.0GHZ x86_64 with 1GB DRAM built with Fedora Core rawhide.
>
> 2.6.19-rc1-mm1 is the last release that works OK and is stable for me, but I
> haven't tested any releases between that and this one. If it's useful I can
> spend some time on this trying it out this week.
>
> Reuben
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [Nasty crash on boot] was Re: 2.6.19-rc2-mm2
2006-10-22 18:13 ` Andrew Morton
@ 2006-10-22 22:37 ` Andi Kleen
0 siblings, 0 replies; 51+ messages in thread
From: Andi Kleen @ 2006-10-22 22:37 UTC (permalink / raw)
To: Andrew Morton; +Cc: Reuben Farrelly, linux-kernel, Ingo Molnar, Jan Beulich
> > Pid: 5, comm: ksoftirqd/1 Not tainted 2.6.19-rc2-mm2 #1
> > RIP: 0010:[<ffffffff80267849>] [<ffffffff80267849>] dump_trace+0x3a9/0x422
This might have been related to the uninitialized cpu variable which
made the interrupt stacks uninitialized
Another patch broke that and gcc even warned about it but I only fixed
it today.
It was only in -mm* for a short time too.
-Andi
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (7 preceding siblings ...)
2006-10-22 13:32 ` [Nasty crash on boot] was Re: 2.6.19-rc2-mm2 Reuben Farrelly
@ 2006-10-23 20:54 ` Magnus Määttä
2006-10-23 21:04 ` 2.6.19-rc2-mm2 Andrew Morton
2006-10-24 8:04 ` WARNING: Do not use with EFI-based (e.g. IA64) systems. Bootloader may get eaten Mel Gorman
` (2 subsequent siblings)
11 siblings, 1 reply; 51+ messages in thread
From: Magnus Määttä @ 2006-10-23 20:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hi Andrew,
On Friday 20 October 2006 10:56, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
> - Added the IOAT tree as git-ioat.patch (Chris Leech)
>
> - I worked out the git magic to make the wireless tree work
> (git-wireless.patch). Hopefully it will be in -mm more often now.
>
I get this BUG and oops everytime I try to start kmail, so I had to fall back to 2.6.18-mm2
to send this mail:
[ 316.283343] BUG: sleeping function called from invalid context at mm/slab.c:3014
[ 316.305500] in_atomic():0, irqs_disabled():1
[ 316.318287] [<c01042af>] show_trace_log_lvl+0x2f/0x50
[ 316.333723] [<c01042f7>] show_trace+0x27/0x30
[ 316.347084] [<c0104424>] dump_stack+0x24/0x30
[ 316.360444] [<c011d332>] __might_sleep+0xa2/0xc0
[ 316.374587] [<c016d0a4>] kmem_cache_alloc+0x84/0xa0
[ 316.389505] [<c0178029>] getname+0x29/0x70
[ 316.402086] [<c0179ffc>] __user_walk_fd+0x1c/0x70
[ 316.416487] [<c016e834>] sys_faccessat+0x94/0x150
[ 316.430886] [<c016e910>] sys_access+0x20/0x30
[ 316.444249] [<c0103518>] syscall_call+0x7/0xb
[ 316.457609] =======================
[ 316.472382] ------------[ cut here ]------------
[ 316.486230] kernel BUG at fs/buffer.c:1243!
[ 316.498758] invalid opcode: 0000 [#1]
[ 316.509725] PREEMPT
[ 316.516327] last sysfs file: /devices/pci0000:00/0000:00:09.0/modalias
[ 316.535875] Modules linked in: snd_seq_midi snd_seq_oss ipaq usbserial dvb_bt8xx dvb_pll bt878 tuner bttv video_buf ir_common btcx_risc tveeprom eeprom snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul snd_seq snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device snd_page_alloc snd_util_mem snd_hwdep psmouse aic7xxx scsi_transport_spi
[ 316.651654] CPU: 0
[ 316.651655] EIP: 0060:[<c01952bd>] Not tainted VLI
[ 316.651657] EFLAGS: 00010046 (2.6.19-rc2-mm2 #1)
[ 316.688733] EIP is at lookup_bh_lru+0x9d/0xb0
[ 316.701765] eax: 00000086 ebx: c16d9040 ecx: d5a31c70 edx: c172d400
[ 316.722091] esi: 00008160 edi: 00001000 ebp: d5a31a84 esp: d5a31a74
[ 316.742416] ds: 007b es: 007b ss: 0068
[ 316.754686] Process kmail (pid: 9484, ti=d5a30000 task=ec8ecaa0 task.ti=d5a30000)
[ 316.776572] Stack: 00000000 d5a31c80 00008160 c16d9040 d5a31aa4 c01952f8 c16d9040 00008160
[ 316.802046] 00001000 d5a31c80 00001000 00008160 d5a31ac4 c0195358 c16d9040 00008160
[ 316.827518] 00001000 d5a31c80 00008160 d5a31c88 d5a31bd0 c01db853 c16d9040 00008160
[ 316.852991] Call Trace:
[ 316.860894] [<c01042af>] show_trace_log_lvl+0x2f/0x50
[ 316.876334] [<c0104397>] show_stack_log_lvl+0x97/0xc0
[ 316.891774] [<c0104622>] show_registers+0x1f2/0x2a0
[ 316.906694] [<c0104842>] die+0x112/0x230
[ 316.918756] [<c01049ea>] do_trap+0x8a/0xd0
[ 316.931335] [<c0104d55>] do_invalid_op+0xb5/0xc0
[ 316.945476] [<c04eda24>] error_code+0x74/0x7c
[ 316.958838] [<c01952f8>] __find_get_block+0x28/0x60
[ 316.973757] [<c0195358>] __getblk+0x28/0x70
[ 316.986597] [<c01db853>] search_by_key+0xb3/0xda0
[ 317.000997] [<c01c1b6d>] search_by_entry_key+0x2d/0x1f0
[ 317.016959] [<c01c212c>] reiserfs_find_entry+0xac/0x130
[ 317.032919] [<c01c2230>] reiserfs_lookup+0x80/0x150
[ 317.047837] [<c01786f1>] real_lookup+0xc1/0x120
[ 317.061719] [<c01789f7>] do_lookup+0x97/0xd0
[ 317.074819] [<c01791e5>] __link_path_walk+0x7b5/0xe00
[ 317.090259] [<c017987a>] link_path_walk+0x4a/0xd0
[ 317.104658] [<c0179bfd>] do_path_lookup+0x12d/0x1e0
[ 317.119580] [<c0179d0e>] __path_lookup_intent_open+0x3e/0x90
[ 317.136840] [<c0179d95>] path_lookup_open+0x35/0x40
[ 317.151760] [<c017a7ef>] open_namei+0x8f/0x5e0
[ 317.165379] [<c016f1e8>] do_filp_open+0x38/0x60
[ 317.179261] [<c016f59e>] do_sys_open+0x5e/0x110
[ 317.193139] [<c016f677>] sys_open+0x27/0x30
[ 317.205982] [<c0103518>] syscall_call+0x7/0xb
[ 317.219341] =======================
[ 317.230050] Code: f0 b8 01 00 00 00 e8 c3 6b f8 ff 89 e0 25 00 e0 ff ff 8b 40 08 a8 08 75 0b 8b 45 f0 83 c4 04 5b 5e 5f c9 c3 e8 75 57 35 00 eb ee <0f> 0b 90 eb fd 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 55 89
[ 317.289888] EIP: [<c01952bd>] lookup_bh_lru+0x9d/0xb0 SS:ESP 0068:d5a31a74
[ 317.310578]
Regards,
Magnus Määttä
--
You too can wear a nose mitten.
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-23 20:54 ` 2.6.19-rc2-mm2 Magnus Määttä
@ 2006-10-23 21:04 ` Andrew Morton
2006-10-23 21:22 ` 2.6.19-rc2-mm2 Magnus Määttä
0 siblings, 1 reply; 51+ messages in thread
From: Andrew Morton @ 2006-10-23 21:04 UTC (permalink / raw)
To: Magnus Määttä; +Cc: linux-kernel
> On Mon, 23 Oct 2006 22:54:15 +0200 Magnus Määttä <novell@kiruna.se> wrote:
> On Friday 20 October 2006 10:56, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> >
> > - Added the IOAT tree as git-ioat.patch (Chris Leech)
> >
> > - I worked out the git magic to make the wireless tree work
> > (git-wireless.patch). Hopefully it will be in -mm more often now.
> >
>
> I get this BUG and oops everytime I try to start kmail, so I had to fall back to 2.6.18-mm2
> to send this mail:
>
> [ 316.283343] BUG: sleeping function called from invalid context at mm/slab.c:3014
> [ 316.305500] in_atomic():0, irqs_disabled():1
Someone disabled local interrupts then forgot to turn them on again. I
wonder what kmail is doing to trigger this?
Please send your .config and I'll see if I can reproduce it.
If not, and if the next -mm is still doing this, it'd be good if
you could run a bisection search, find the buggy patch.
Thanks.
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2
2006-10-23 21:04 ` 2.6.19-rc2-mm2 Andrew Morton
@ 2006-10-23 21:22 ` Magnus Määttä
0 siblings, 0 replies; 51+ messages in thread
From: Magnus Määttä @ 2006-10-23 21:22 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hi again,
On Monday 23 October 2006 23:04, Andrew Morton wrote:
> > On Mon, 23 Oct 2006 22:54:15 +0200 Magnus Määttä <novell@kiruna.se> wrote:
> > On Friday 20 October 2006 10:56, Andrew Morton wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> > >
> > > - Added the IOAT tree as git-ioat.patch (Chris Leech)
> > >
> > > - I worked out the git magic to make the wireless tree work
> > > (git-wireless.patch). Hopefully it will be in -mm more often now.
> > >
> >
> > I get this BUG and oops everytime I try to start kmail, so I had to fall back to 2.6.18-mm2
> > to send this mail:
> >
> > [ 316.283343] BUG: sleeping function called from invalid context at mm/slab.c:3014
> > [ 316.305500] in_atomic():0, irqs_disabled():1
>
> Someone disabled local interrupts then forgot to turn them on again. I
> wonder what kmail is doing to trigger this?
>
> Please send your .config and I'll see if I can reproduce it.
>
> If not, and if the next -mm is still doing this, it'd be good if
> you could run a bisection search, find the buggy patch.
Here is my .config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc2-mm2
# Sat Oct 21 16:42:18 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_KEVENT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_READAHEAD_ALLOW_OVERHEADS is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
# CONFIG_NETLABEL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_CONFIG is not set
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=y
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=2048
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
# CONFIG_VIDEO_CX88_ALSA is not set
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=y
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
CONFIG_DVB_TDA10021=y
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
# CONFIG_DVB_TUNER_MT2060 is not set
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
# CONFIG_DVB_TUA6100 is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=512
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_QUATECH_ESU100 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=y
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_K8 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Auxiliary Display support
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
#
# Caches
#
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso8859-15"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
# CONFIG_AFS_FSCACHE is not set
CONFIG_RXRPC=y
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
# CONFIG_STACK_UNWIND is not set
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply [flat|nested] 51+ messages in thread
* WARNING: Do not use with EFI-based (e.g. IA64) systems. Bootloader may get eaten
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (8 preceding siblings ...)
2006-10-23 20:54 ` 2.6.19-rc2-mm2 Magnus Määttä
@ 2006-10-24 8:04 ` Mel Gorman
2006-10-26 6:11 ` 2.6.19-rc2-mm2 Joseph Fannin
2006-10-28 3:18 ` 2.6.19-rc2-mm2 - process_session-helper breaks /sbin/killall5 Valdis.Kletnieks
11 siblings, 0 replies; 51+ messages in thread
From: Mel Gorman @ 2006-10-24 8:04 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On (20/10/06 01:56), Andrew Morton didst pronounce:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
Due to the issue described here (http://lkml.org/lkml/2006/10/21/61),
any system based on EFI may have issues with their bootloader. As the boot
partition is FAT32 any alteration of files in the EFI partition will
effectively delete them and the machine will need to be recovered via
CD or by booting over the network.
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (9 preceding siblings ...)
2006-10-24 8:04 ` WARNING: Do not use with EFI-based (e.g. IA64) systems. Bootloader may get eaten Mel Gorman
@ 2006-10-26 6:11 ` Joseph Fannin
2006-10-28 3:18 ` 2.6.19-rc2-mm2 - process_session-helper breaks /sbin/killall5 Valdis.Kletnieks
11 siblings, 0 replies; 51+ messages in thread
From: Joseph Fannin @ 2006-10-26 6:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, paulus, linuxppc-dev
On Fri, Oct 20, 2006 at 01:56:41AM -0700, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
The "Lazy interrupt disabling for 64-bit machines" patch
(which is in -rc2-mm2 through git-powerpc) seems to make -rc2-mm2
not build for ppc32 when KEXEC is enabled. Building with kexec
enabled worked in -rc2-mm1.
Building -mm2 fails when trying to make the vmlinux. I don't have
the exact messages anymore, sorry, but it was an "undefined reference
to hard_irq_disable' in arch/powerpc/kernel/entry_32.S". This appears
to be the result of an earlier warning about an "implicit
declaration of hard_irq_disable" in arch/powerpc/kernel/crash.c .
(There's a comment at the top of that file that made it sound to
me like the file is for PPC64 only, but looking closer makes me think
that's not the case.)
Backing out that "lazy interrupt" patch got -mm2 building again.
Turning kexec off works too.
I don't use kexec, I just have it config'd on. I doubt anyone is
actually using kexec in -mm on ppc32. I'm just sayin'.
--
Joseph Fannin
jhf@columbus.rr.com
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2 - process_session-helper breaks /sbin/killall5
2006-10-20 8:56 2.6.19-rc2-mm2 Andrew Morton
` (10 preceding siblings ...)
2006-10-26 6:11 ` 2.6.19-rc2-mm2 Joseph Fannin
@ 2006-10-28 3:18 ` Valdis.Kletnieks
2006-10-28 4:47 ` Andrew Morton
11 siblings, 1 reply; 51+ messages in thread
From: Valdis.Kletnieks @ 2006-10-28 3:18 UTC (permalink / raw)
To: Andrew Morton, Cedric Le Goater; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1524 bytes --]
On Fri, 20 Oct 2006 01:56:41 PDT, Andrew Morton said:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
> +add-process_session-helper-routine.patch
> +add-process_session-helper-routine-deprecate-old-field.patch
> +add-process_session-helper-routine-deprecate-old-field-tidy.patch
> +add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
> +add-process_session-helper-routine-deprecate-old-field-fix-warnings-2.patch
> +rename-struct-namespace-to-struct-mnt_namespace.patch
> +add-an-identifier-to-nsproxy.patch
> +rename-struct-pspace-to-struct-pid_namespace.patch
> +add-pid_namespace-to-nsproxy.patch
> +use-current-nsproxy-pid_ns.patch
> +add-child-reaper-to-pid_namespace.patch
>
> Start work on virtualising process sessions.
Sorry for the delay in spotting this one sooner (and I'm surprised apparently
nobody else has). Was busy, didn't get a chance to bisect it at all till
today, and I only got as far as "one of the above patches".
System works fine, except when you go to shutdown. When it hits the /sbin/killall5
call in /etc/init.d/halt, it kills *all* the processes, and we get a
nice message 'INIT: no more processes in current runlevel', and we're dead in
the water. Checking with alt-sysrg-T shows that in fact, the only things
left running are the various kernel threads. As near as I can tell, killall5
wasn't able to tell that its parent process was part of its process group,
so didn't refrain from killing it.
Any ideas/clues?
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 51+ messages in thread* Re: 2.6.19-rc2-mm2 - process_session-helper breaks /sbin/killall5
2006-10-28 3:18 ` 2.6.19-rc2-mm2 - process_session-helper breaks /sbin/killall5 Valdis.Kletnieks
@ 2006-10-28 4:47 ` Andrew Morton
2006-10-28 17:53 ` Valdis.Kletnieks
0 siblings, 1 reply; 51+ messages in thread
From: Andrew Morton @ 2006-10-28 4:47 UTC (permalink / raw)
To: Valdis.Kletnieks; +Cc: Cedric Le Goater, linux-kernel
On Fri, 27 Oct 2006 23:18:39 -0400
Valdis.Kletnieks@vt.edu wrote:
> On Fri, 20 Oct 2006 01:56:41 PDT, Andrew Morton said:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm2/
>
> > +add-process_session-helper-routine.patch
> > +add-process_session-helper-routine-deprecate-old-field.patch
> > +add-process_session-helper-routine-deprecate-old-field-tidy.patch
> > +add-process_session-helper-routine-deprecate-old-field-fix-warnings.patch
> > +add-process_session-helper-routine-deprecate-old-field-fix-warnings-2.patch
> > +rename-struct-namespace-to-struct-mnt_namespace.patch
> > +add-an-identifier-to-nsproxy.patch
> > +rename-struct-pspace-to-struct-pid_namespace.patch
> > +add-pid_namespace-to-nsproxy.patch
> > +use-current-nsproxy-pid_ns.patch
> > +add-child-reaper-to-pid_namespace.patch
> >
> > Start work on virtualising process sessions.
>
> Sorry for the delay in spotting this one sooner (and I'm surprised apparently
> nobody else has). Was busy, didn't get a chance to bisect it at all till
> today, and I only got as far as "one of the above patches".
>
> System works fine, except when you go to shutdown. When it hits the /sbin/killall5
> call in /etc/init.d/halt, it kills *all* the processes, and we get a
> nice message 'INIT: no more processes in current runlevel', and we're dead in
> the water. Checking with alt-sysrg-T shows that in fact, the only things
> left running are the various kernel threads. As near as I can tell, killall5
> wasn't able to tell that its parent process was part of its process group,
> so didn't refrain from killing it.
>
> Any ideas/clues?
did you apply the hotfixes?
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: 2.6.19-rc2-mm2 - process_session-helper breaks /sbin/killall5
2006-10-28 4:47 ` Andrew Morton
@ 2006-10-28 17:53 ` Valdis.Kletnieks
0 siblings, 0 replies; 51+ messages in thread
From: Valdis.Kletnieks @ 2006-10-28 17:53 UTC (permalink / raw)
To: Andrew Morton; +Cc: Cedric Le Goater, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 901 bytes --]
On Fri, 27 Oct 2006 21:47:34 PDT, Andrew Morton said:
>
> > System works fine, except when you go to shutdown. When it hits the /sbin/killall5
> > call in /etc/init.d/halt, it kills *all* the processes, and we get a
> > nice message 'INIT: no more processes in current runlevel', and we're dead in
> > the water. Checking with alt-sysrg-T shows that in fact, the only things
> > left running are the various kernel threads. As near as I can tell, killall5
> > wasn't able to tell that its parent process was part of its process group,
> > so didn't refrain from killing it.
> >
> > Any ideas/clues?
>
> did you apply the hotfixes?
D'Oh!. It took me about 3 days to get around to building -rc2-mm2, and I
*did* check the hotfix directory first, and all that was there was a powerpc
patch. Apparently the one I needed got dropped into that directory about 2
hours later. :)
Is working now. :)
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 51+ messages in thread