From: Olivier Nicolas <olivn@trollprod.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6.19-rc5 x86_64 irq 22: nobody cared
Date: Wed, 08 Nov 2006 13:44:29 +0100 [thread overview]
Message-ID: <4551D12D.4010304@trollprod.org> (raw)
Hi,
2.6.19-rc5 does not boot properly, I have tried pci=routeirq, irpoll
without success.
Full details (.config, dmesg, /proc/interrupts) are in
http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz
Olivier
System: ASUS M2N32-SLI, AMD64 X2 Dual Core 4600
kernel 2.6.9-rc5
irq 22: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ> [<ffffffff80259055>] __report_bad_irq+0x35/0x90
[<ffffffff802592d3>] note_interrupt+0x223/0x280
[<ffffffff80259d41>] handle_fasteoi_irq+0xb1/0xf0
[<ffffffff8020b17c>] call_softirq+0x1c/0x30
[<ffffffff8020d1ba>] do_IRQ+0x8a/0xe0
[<ffffffff8020a571>] ret_from_intr+0x0/0xa
<EOI>
handlers:
[<ffffffff8807f150>] (nv_generic_interrupt+0x0/0xc0 [sata_nv])
Disabling IRQ #22
CPU0 CPU1
0: 223 45540 IO-APIC-edge timer
1: 1 402 IO-APIC-edge i8042
6: 1 4 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 0 103 IO-APIC-edge i8042
14: 7 140 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi libata
17: 0 10 IO-APIC-fasteoi bttv0
20: 0 20 IO-APIC-fasteoi ehci_hcd:usb1
21: 0 0 IO-APIC-fasteoi libata
22: 214 99786 IO-APIC-fasteoi libata, HDA Intel
23: 76 6230 IO-APIC-fasteoi libata, ohci_hcd:usb2
308: 5 3169 PCI-MSI-edge eth1
309: 0 10 PCI-MSI-edge eth1
310: 0 44 PCI-MSI-edge eth1
311: 1 3193 PCI-MSI-edge eth0
312: 0 0 PCI-MSI-edge eth0
313: 0 1 PCI-MSI-edge eth0
NMI: 64 68
LOC: 45716 45691
ERR: 0
kernel 2.6.19-rc5 with pci=routeirq
irq 21: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ> [<ffffffff80259055>] __report_bad_irq+0x35/0x90
[<ffffffff802592d3>] note_interrupt+0x223/0x280
[<ffffffff80259d41>] handle_fasteoi_irq+0xb1/0xf0
[<ffffffff8020b17c>] call_softirq+0x1c/0x30
[<ffffffff8020d1ba>] do_IRQ+0x8a/0xe0
[<ffffffff802092f0>] default_idle+0x0/0x50
[<ffffffff8020a571>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff80209319>] default_idle+0x29/0x50
[<ffffffff8020939b>] cpu_idle+0x5b/0x80
[<ffffffff8050039c>] start_secondary+0x50c/0x520
handlers:
[<ffffffff880e6fd0>] (usb_hcd_irq+0x0/0x60 [usbcore])
Disabling IRQ #21
CPU0 CPU1
0: 214 24856 IO-APIC-edge timer
1: 0 359 IO-APIC-edge i8042
6: 0 5 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 0 103 IO-APIC-edge i8042
14: 0 128 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi libata
17: 1 2 IO-APIC-fasteoi bttv0
20: 22 6469 IO-APIC-fasteoi libata
21: 11 99989 IO-APIC-fasteoi ehci_hcd:usb2, HDA Intel
22: 0 1 IO-APIC-fasteoi libata, ohci_hcd:usb1
23: 0 0 IO-APIC-fasteoi libata
308: 8 2378 PCI-MSI-edge eth1
309: 0 9 PCI-MSI-edge eth1
310: 0 9 PCI-MSI-edge eth1
311: 4 2401 PCI-MSI-edge eth0
312: 0 0 PCI-MSI-edge eth0
313: 0 1 PCI-MSI-edge eth0
NMI: 74 47
LOC: 25024 24991
ERR: 0
kernel 2.6.19-rc5 with irqpoll
Hang during boot
(See screenshot in http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz)
kernel 2.6.18 (works without any problem)
CPU0 CPU1
0: 1590 998089 IO-APIC-edge timer
1: 2 657 IO-APIC-edge i8042
6: 0 5 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 194 59353 IO-APIC-edge i8042
14: 13 6381 IO-APIC-edge ide0
50: 0 0 IO-APIC-level libata
58: 0 0 IO-APIC-level libata
66: 109 181425 IO-APIC-level libata, nvidia
74: 41 963 IO-APIC-level ehci_hcd:usb1, HDA Intel
82: 4 6 IO-APIC-level bttv0
90: 0 0 PCI-MSI-X eth0
98: 3 0 PCI-MSI-X eth0
106: 212234 0 PCI-MSI-X eth0
114: 532 0 PCI-MSI-X eth1
122: 445 0 PCI-MSI-X eth1
130: 212217 0 PCI-MSI-X eth1
233: 73 23009 IO-APIC-level libata, ohci_hcd:usb2
NMI: 99 104
LOC: 999684 999664
ERR: 0
MIS: 0
next reply other threads:[~2006-11-08 12:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-08 12:44 Olivier Nicolas [this message]
2006-11-09 6:49 ` 2.6.19-rc5 x86_64 irq 22: nobody cared Adrian Bunk
2006-11-09 7:55 ` Yinghai Lu
2006-11-09 9:29 ` Olivier Nicolas
2006-11-09 10:38 ` Takashi Iwai
2006-11-09 16:08 ` Olivier Nicolas
2006-11-09 16:49 ` Stephen Hemminger
2006-11-09 17:12 ` Eric W. Biederman
2006-11-09 8:17 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2006-11-09 21:03 Lu, Yinghai
2006-11-10 2:09 Lu, Yinghai
2006-11-10 9:56 ` Olivier Nicolas
2006-11-10 18:20 Lu, Yinghai
2006-11-10 20:11 ` Eric W. Biederman
2006-11-10 20:16 Lu, Yinghai
2006-11-10 20:22 Lu, Yinghai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4551D12D.4010304@trollprod.org \
--to=olivn@trollprod.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox