public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Franck Bui-Huu <vagabon.xyz@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>,
	linux-kernel@vger.kernel.org, adaplas@pol.net
Subject: Re: 2.6.19-rc5-mm1: HPC nx6325 breakage, VESA fb problem, md-raid problem
Date: Fri, 10 Nov 2006 11:44:19 +0100	[thread overview]
Message-ID: <45545803.1040005@innova-card.com> (raw)
In-Reply-To: <20061109095811.ac654e13.akpm@osdl.org>

Andrew Morton wrote:
> On Thu, 9 Nov 2006 16:42:00 +0100
> "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> 
>> This indeed is caused by fbcon-rere-fix-little-endian-bogosity-in-slow_imageblit.patch
>> which affects two out of three boxes on which I tested it (both have Radeon cards).
> 
> Thanks, dropped.
> 

Well I'm probably missing something but I really don't see what !

For example, let say that the four first bytes of an image are 0x06,
0xe0, 0x38, 0x00.

If
	bpp = 1
	start_index = 0
	on a little endian platform 
	this patch is _not_ applied

slow_imageblit() will write into the frame buffer the following
bytes: 0x60, 0x07, 0x1c, 0x00 instead of the original ones. The bits
of each bytes have been inversed (bit7->bit0, bit6->bit1, bit5->bit2,
bit4->bit3, bit3->bit4, ...) and that's the reason why _I_ get all
fonts inverted.

With this patch applied, the bytes written into the frame buffer will
be exactly the same as the original ones. Therefore it fixes my
inverted view but broke Rafael's one.

Now, I'm very not familiar with all frame buffer stuff so I must be
missing somthing obvious. If anyone could give me some hints there
that would be nice.

Thanks
		Franck

  parent reply	other threads:[~2006-11-10 10:43 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-08  9:54 2.6.19-rc5-mm1 Andrew Morton
2006-11-08 11:11 ` 2.6.19-rc5-mm1 Reuben Farrelly
2006-11-08 20:05   ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-08 20:15     ` 2.6.19-rc5-mm1 Dave Jones
2006-11-08 20:31       ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-08 21:18         ` 2.6.19-rc5-mm1 Dave Jones
2006-11-09  3:09       ` [PATCH] cpufreq: select consistently (Re: 2.6.19-rc5-mm1) Randy Dunlap
2006-11-09  3:39         ` Dave Jones
2006-11-08 12:07 ` 2.6.19-rc5-mm1 Mariusz Kozlowski
2006-11-08 12:32   ` 2.6.19-rc5-mm1 Hesse, Christian
2006-11-08 12:54     ` 2.6.19-rc5-mm1 Mariusz Kozlowski
2006-11-08 14:57       ` 2.6.19-rc5-mm1 Mariusz Kozlowski
2006-11-08 18:13         ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-08 19:19         ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-08 20:47           ` 2.6.19-rc5-mm1 Mariusz Kozlowski
2006-11-08 15:08 ` 2.6.19-rc5-mm1 Benoit Boissinot
2006-11-08 22:10   ` 2.6.19-rc5-mm1 Thomas Gleixner
2006-11-08 23:31 ` 2.6.19-rc5-mm1 Rafael J. Wysocki
2006-11-09  0:17   ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-09  0:44     ` 2.6.19-rc5-mm1 Rafael J. Wysocki
2006-11-09  0:55       ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-09  1:04         ` 2.6.19-rc5-mm1 Rafael J. Wysocki
2006-11-09 15:42           ` 2.6.19-rc5-mm1: HPC nx6325 breakage, VESA fb problem, md-raid problem Rafael J. Wysocki
2006-11-09 17:58             ` Andrew Morton
2006-11-10  4:49               ` Andi Kleen
2006-11-10  5:15                 ` Andrew Morton
2006-11-10  6:19                   ` Andi Kleen
2006-11-10 11:21                     ` Rafael J. Wysocki
2006-11-10 11:51                       ` Andi Kleen
2006-11-10 10:44               ` Franck Bui-Huu [this message]
2006-11-10  6:28             ` Neil Brown
2006-11-10 23:20               ` Rafael J. Wysocki
2006-11-10 23:29                 ` Neil Brown
2006-11-09 15:04 ` 2.6.19-rc5-mm1 -- ppc64 ohci-hdc.c compile failure Andy Whitcroft
2006-11-09 22:43   ` Benjamin Herrenschmidt
2006-11-10  9:49     ` Paul Mackerras
2006-11-10  9:58       ` Benjamin Herrenschmidt
2006-11-09 18:43 ` 2.6.19-rc5-mm1 Benoit Boissinot
2006-11-09 19:04   ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-09 19:26     ` 2.6.19-rc5-mm1 Mattia Dongili
2006-11-09 21:58       ` [linux-usb-devel] 2.6.19-rc5-mm1 Alan Stern
2006-11-09 22:51         ` Andrew Morton
2006-11-09 23:39           ` Cédric Augonnet
2006-11-10  0:11             ` Andrew Morton
2006-11-10 20:17               ` Anton Vorontsov
2006-11-10 19:29           ` Benoit Boissinot
2006-11-10  3:21 ` 2.6.19-rc5-mm1 Ed Tomlinson
2006-11-10  3:31   ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-10 12:28     ` 2.6.19-rc5-mm1 Ed Tomlinson
2006-11-10 16:29 ` 2.6.19-rc5-mm1 Benoit Boissinot
2006-11-10 16:59   ` 2.6.19-rc5-mm1 Thomas Gleixner
2006-11-10 17:25     ` 2.6.19-rc5-mm1 Benoit Boissinot
2006-11-10 20:20       ` 2.6.19-rc5-mm1 Benoit Boissinot
2006-11-10 20:41         ` 2.6.19-rc5-mm1 Thomas Gleixner
2006-11-13 15:58 ` 2.6.19-rc5-mm1 Mariusz Kozlowski
2006-11-13 22:19   ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-13 22:26     ` 2.6.19-rc5-mm1 Mariusz Kozlowski
2006-11-13 23:37       ` 2.6.19-rc5-mm1 Andrew Morton
2006-11-13 21:03 ` [-mm patch] arch/i386/kernel/apic.c: make a function static Adrian Bunk
2006-11-14  6:54   ` Ingo Molnar
2006-11-13 21:03 ` [-mm patch] make arch/i386/kernel/io_apic.c:timer_irq_works() static again Adrian Bunk
2006-11-13 21:52   ` Zachary Amsden
2006-11-14  6:53   ` Ingo Molnar
2006-11-13 21:03 ` [-mm patch] i386: unexport read_persistent_clock Adrian Bunk
2006-11-13 21:04 ` [-mm patch] make arch/i386/kernel/cpu/common.c:alloc_gdt() static Adrian Bunk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45545803.1040005@innova-card.com \
    --to=vagabon.xyz@gmail.com \
    --cc=adaplas@pol.net \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjw@sisk.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox