From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753164AbWKLUoq (ORCPT ); Sun, 12 Nov 2006 15:44:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753168AbWKLUoq (ORCPT ); Sun, 12 Nov 2006 15:44:46 -0500 Received: from mail1.key-systems.net ([81.3.43.253]:55015 "HELO mailer2-1.key-systems.net") by vger.kernel.org with SMTP id S1753164AbWKLUoo (ORCPT ); Sun, 12 Nov 2006 15:44:44 -0500 Message-ID: <455787B7.1090401@scientia.net> Date: Sun, 12 Nov 2006 21:44:39 +0100 From: Christoph Anton Mitterer User-Agent: Icedove 1.5.0.7 (X11/20061014) MIME-Version: 1.0 To: Sergey Vlasov CC: linux-kernel@vger.kernel.org Subject: Re: unexplainable read errors, copy/diff-issue References: <4553DD90.1090604@scientia.net> <20061110135649.16cccca0.vsu@altlinux.ru> In-Reply-To: <20061110135649.16cccca0.vsu@altlinux.ru> Content-Type: multipart/mixed; boundary="------------070609000108070501080902" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------070609000108070501080902 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sergey Vlasov wrote: > So you have 4GB RAM, and most likely some memory is remapped above the > 4GB address boundary. Could you show the full dmesg output after boot? Here it comes :) I'll try the other things this night or tomorrow :) Regards, Chris. Bootdata ok (command line is root=/dev/sda1 ro snd-ice1724.index=0 snd-intel8x0.index=1 ) Linux version 2.6.18 () (root@euler) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #1 SMP PREEMPT Fri Nov 10 01:18:51 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b000 (usable) BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000da000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 000000007ff91000 (ACPI data) BIOS-e820: 000000007ff91000 - 0000000080000000 (ACPI NVS) BIOS-e820: 0000000080000000 - 000000009ff80000 (usable) BIOS-e820: 000000009ff80000 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000160000000 (usable) DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f78f0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000007ff8b258 ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x000000007ff90b06 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000007ff90b7a ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000007ff90bca ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000007ff90c68 ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000007ff90c90 ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 2 Node 0 using interleaving mode 1/0 No NUMA configuration found Faking a node at 0000000000000000-0000000160000000 Bootmem setup node 0 0000000000000000-0000000160000000 On node 0 totalpages: 1027242 DMA zone: 2674 pages, LIFO batch:0 DMA32 zone: 636728 pages, LIFO batch:31 Normal zone: 387840 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xd0000000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 17, address 0xd0000000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xd0001000] gsi_base[28]) IOAPIC[2]: apic_id 6, version 17, address 0xd0001000, GSI 28-31 ACPI: IOAPIC (id[0x07] address[0xd0800000] gsi_base[32]) IOAPIC[3]: apic_id 7, version 17, address 0xd0800000, GSI 32-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at a4000000 (gap: a0000000:40000000) Built 1 zonelists. Total pages: 1027242 Kernel command line: root=/dev/sda1 ro snd-ice1724.index=0 snd-intel8x0.index=1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2210.208 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ ac000000 size 64 MB CPU 1: aperture @ ac000000 size 64 MB Memory: 4102504k/5767168k available (3007k kernel code, 90372k reserved, 1245k data, 216k init) Calibrating delay using timer specific routine.. 4422.26 BogoMIPS (lpj=2211131) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 32k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12558021 Detected 12.558 MHz APIC timer. Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4419.78 BogoMIPS (lpj=2209893) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual Core AMD Opteron(tm) Processor 275 stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 581 cycles) Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4419.79 BogoMIPS (lpj=2209899) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual Core AMD Opteron(tm) Processor 275 stepping 02 CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -234 cycles, maxerr 878 cycles) Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4419.73 BogoMIPS (lpj=2209865) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual Core AMD Opteron(tm) Processor 275 stepping 02 CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff -121 cycles, maxerr 1076 cycles) Brought up 4 CPUs testing NMI watchdog ... OK. migration_cost=380 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:02:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Root Bridge [PCI2] (0000:10) PCI: Probing PCI hardware (bus 10) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] ACPI: PCI Root Bridge [PCI1] (0000:80) PCI: Probing PCI hardware (bus 80) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LSI1] (IRQs 52 53 54 55) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture pnp: 00:02: ioport range 0x8000-0x807f could not be reserved pnp: 00:02: ioport range 0x8080-0x80ff has been reserved pnp: 00:02: ioport range 0x8400-0x847f has been reserved pnp: 00:02: ioport range 0x8480-0x84ff has been reserved pnp: 00:02: ioport range 0x8800-0x887f has been reserved pnp: 00:02: ioport range 0x8880-0x88ff has been reserved pnp: 00:02: ioport range 0xa000-0xa03f has been reserved pnp: 00:02: ioport range 0xa040-0xa07f has been reserved PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: b0100000-b01fffff PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:02:00.0 PCI: Bridge: 0000:00:0e.0 IO window: 2000-2fff MEM window: b1000000-b2ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:10:0a.0 IO window: 3000-3fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:0b.0 IO window: 4000-4fff MEM window: d0100000-d05fffff PREFETCH window: a4000000-a41fffff PCI: Bridge: 0000:80:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:80:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1163360476.201:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus. PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:80:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:80:0e.0:pcie00] ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 GSI 16 sharing vector 0xC9 and IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 23 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 010f1:2895 bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 55 GSI 17 sharing vector 0xD1 and IRQ 17 ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LMAC] -> GSI 55 (level, high) -> IRQ 209 PCI: Setting latency timer of device 0000:80:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 010f1:2895 bound to 0000:80:0a.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: IC35L120AVV207-1, ATA DISK drive hdb: PLEXTOR DVDR PX-760A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v1.1-646.<7>libata version 2.00 loaded. sata_nv 0000:00:07.0: version 2.0 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 GSI 18 sharing vector 0xD9 and IRQ 18 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, high) -> IRQ 217 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x1C40 ctl 0x1C36 bmdma 0x1C10 irq 217 ata2: SATA max UDMA/133 cmd 0x1C38 ctl 0x1C32 bmdma 0x1C18 irq 217 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 Vendor: ATA Model: HDT722525DLA380 Rev: V44O Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: HDT722525DLA380 Rev: V44O Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 21 GSI 19 sharing vector 0xE1 and IRQ 19 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 21 (level, high) -> IRQ 225 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x1C58 ctl 0x1C4E bmdma 0x1C20 irq 225 ata4: SATA max UDMA/133 cmd 0x1C50 ctl 0x1C4A bmdma 0x1C28 irq 225 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.01 GSI 20 sharing vector 0xE9 and IRQ 20 ACPI: PCI Interrupt 0000:12:06.0[A] -> GSI 30 (level, low) -> IRQ 233 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator,Target} scsi4 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=233 GSI 21 sharing vector 0x32 and IRQ 21 ACPI: PCI Interrupt 0000:12:06.1[B] -> GSI 31 (level, low) -> IRQ 50 mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator,Target} scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=50 Fusion MPT misc device (ioctl) driver 3.04.01 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19 GSI 22 sharing vector 0x3A and IRQ 22 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK4] -> GSI 19 (level, high) -> IRQ 58 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[b0104000-b01047ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 GSI 23 sharing vector 0x42 and IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, high) -> IRQ 66 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 66, io mem 0xb0001000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt 0000:12:04.2[C] -> GSI 30 (level, low) -> IRQ 233 PCI: VIA IRQ fixup for 0000:12:04.2, from 5 to 9 ehci_hcd 0000:12:04.2: EHCI Host Controller ehci_hcd 0000:12:04.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:12:04.2: irq 233, io mem 0xd0100000 ehci_hcd 0000:12:04.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 201, io mem 0xb0000000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected Initializing USB Mass Storage driver... usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using ohci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0810000238d2d] usb 3-4: new full speed USB device using ohci_hcd and address 3 usb 3-4: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input0 input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-2 input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input1 input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input2 i2c /dev entries driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0xa000 i2c_adapter i2c-1: nForce2 SMBus adapter at 0xa040 smsc47b397: found SMSC LPC47B397-NC (base address 0x0480, revision 1) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 22 (level, high) -> IRQ 217 PCI: Setting latency timer of device 0000:00:04.0 to 64 input: PS2++ Logitech MX Mouse as /class/input/input3 AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 51816 usecs intel8x0: clocking to 46928 GSI 24 sharing vector 0x4A and IRQ 24 ACPI: PCI Interrupt 0000:11:04.0[A] -> GSI 24 (level, low) -> IRQ 74 usbcore: registered new driver snd-usb-audio ALSA device list: #0: Terratec Aureon 7.1-Universe at 0x3080, irq 74 #1: NVidia CK804 with AD1981B at 0xb0002000, irq 217 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 216k freed EDAC MC: Ver: 2.0.1 Nov 10 2006 EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2 eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Adding 4882712k swap on /dev/hda6. Priority:-1 extents:1 across:4882712k EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 24 eth0: no IPv6 routers present eth1: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18 GSI 25 sharing vector 0x52 and IRQ 25 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK3] -> GSI 18 (level, high) -> IRQ 82 PCI: Setting latency timer of device 0000:02:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8776 Mon Oct 16 21:53:43 PDT 2006 i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips --------------070609000108070501080902 Content-Type: text/x-vcard; charset=utf-8; name="calestyo.vcf" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="calestyo.vcf" YmVnaW46dmNhcmQNCmZuOk1pdHRlcmVyLCBDaHJpc3RvcGggQW50b24NCm46TWl0dGVyZXI7 Q2hyaXN0b3BoIEFudG9uDQplbWFpbDtpbnRlcm5ldDpjYWxlc3R5b0BzY2llbnRpYS5uZXQN CngtbW96aWxsYS1odG1sOlRSVUUNCnZlcnNpb246Mi4xDQplbmQ6dmNhcmQNCg0K --------------070609000108070501080902--