From: Jeff Garzik <jeff@garzik.org>
To: Stephen.Clark@seclark.us
Cc: Linus Torvalds <torvalds@osdl.org>,
Arjan van de Ven <arjan@infradead.org>,
Takashi Iwai <tiwai@suse.de>, David Miller <davem@davemloft.net>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ALSA: hda-intel - Disable MSI support by default
Date: Wed, 15 Nov 2006 14:48:48 -0500 [thread overview]
Message-ID: <455B6F20.6050503@garzik.org> (raw)
In-Reply-To: <455B6BB1.7030009@seclark.us>
Stephen Clark wrote:
> Also, I find it disturbing that we are forcing users to have know about
> all these
> magic options that have to be put on the kernel boot line. My hard drive
> on my
> new laptop would only run at 1.2mbs until I found out I had to use
> combined_mode=libata
> and build a new ramdisk that included ata_piix.
That's what happens when two drivers want to drive the same hardware.
The "slow and safe" default is the only proven-stable option, with the
proven-stable PATA driver. The other two options (drivers/ide for
PATA+SATA -> leads to SATA locksup) and (libata for PATA -> ok but
breaks existing configs, and less field time) are considered less safe.
Combined mode is ugly no matter how you look at it. Just turn it off in
BIOS (or pressure system vendor for this ability if BIOS lacks it, e.g.
some Dell servers)
And throw some annoyance at Intel for creating such a headache.
Jeff
next prev parent reply other threads:[~2006-11-15 19:49 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200611150059.kAF0xBTl009796@hera.kernel.org>
2006-11-15 1:34 ` [PATCH] ALSA: hda-intel - Disable MSI support by default Jeff Garzik
2006-11-15 1:55 ` Linus Torvalds
2006-11-15 2:40 ` Jeff Garzik
2006-11-15 2:49 ` Linus Torvalds
2006-11-15 3:00 ` David Miller
2006-11-15 3:10 ` Linus Torvalds
2006-11-15 3:21 ` David Miller
2006-11-15 3:54 ` Linus Torvalds
2006-11-15 4:11 ` Jeff Garzik
2006-11-15 4:15 ` David Miller
2006-11-15 4:24 ` Jeff Garzik
2006-11-15 4:28 ` David Miller
2006-11-16 2:25 ` Benjamin Herrenschmidt
2006-11-16 2:28 ` Benjamin Herrenschmidt
2006-11-16 3:25 ` Jeff Garzik
2006-11-16 4:12 ` Benjamin Herrenschmidt
2006-11-16 6:13 ` Jeff Garzik
2006-11-16 14:41 ` Krzysztof Halasa
2006-11-16 15:27 ` Jeff Garzik
2006-11-16 17:24 ` Roland Dreier
2006-11-15 19:09 ` Stephen Hemminger
2006-11-15 19:23 ` Jeff Garzik
2006-11-15 19:49 ` Stephen Hemminger
2006-11-15 22:31 ` Roland Dreier
2006-11-16 2:24 ` Benjamin Herrenschmidt
2006-11-15 4:30 ` Roland Dreier
2006-11-15 4:56 ` Jeff Garzik
2006-11-15 15:53 ` Linus Torvalds
2006-11-15 18:30 ` Jeff Garzik
2006-11-15 18:45 ` Roland Dreier
2006-11-16 2:29 ` Benjamin Herrenschmidt
2006-11-15 13:34 ` Krzysztof Halasa
2006-11-15 18:42 ` Jeff Garzik
2006-11-15 19:04 ` Linus Torvalds
2006-11-15 19:20 ` Jeff Garzik
2006-11-15 19:35 ` Linus Torvalds
2006-11-15 19:59 ` Mws
2006-11-15 20:14 ` Linus Torvalds
2006-11-15 20:53 ` Olivier Nicolas
2006-11-16 6:08 ` Yinghai Lu
2006-11-16 23:25 ` Olivier Nicolas
2006-11-15 21:10 ` Mws
2006-11-16 11:10 ` Mws
2006-11-15 4:14 ` Roland Dreier
2006-11-15 4:49 ` Andi Kleen
2006-11-15 4:57 ` Roland Dreier
2006-11-15 5:11 ` Andi Kleen
2006-11-15 22:43 ` Roland Dreier
2006-11-15 18:35 ` [PATCH] ACPI: use MSI_NOT_SUPPORTED bit Randy Dunlap
2006-11-15 18:44 ` Andi Kleen
2006-11-15 19:41 ` [PATCH v2] " Randy Dunlap
2006-11-15 19:58 ` [PATCH v3] " Randy Dunlap
2006-11-15 20:19 ` [PATCH] " Len Brown
2006-11-16 2:22 ` [PATCH] ALSA: hda-intel - Disable MSI support by default Benjamin Herrenschmidt
2006-11-15 10:31 ` Takashi Iwai
2006-11-15 16:19 ` Linus Torvalds
2006-11-15 16:24 ` Arjan van de Ven
2006-11-15 16:36 ` Linus Torvalds
2006-11-15 18:40 ` Jeff Garzik
2006-11-15 18:51 ` Linus Torvalds
2006-11-15 19:01 ` Arjan van de Ven
2006-11-15 19:34 ` Stephen Clark
2006-11-15 19:48 ` Jeff Garzik [this message]
2006-11-15 20:01 ` Stephen Clark
2006-11-15 18:32 ` Jeff Garzik
2006-11-15 18:32 ` Jeff Garzik
2006-11-15 18:58 ` Takashi Iwai
2006-11-15 19:15 ` Jeff Garzik
2006-11-16 10:44 ` Takashi Iwai
2006-11-16 23:01 ` Olivier Nicolas
2006-11-17 10:55 ` Takashi Iwai
2006-11-17 16:17 ` Yinghai Lu
2006-11-17 16:35 ` Linus Torvalds
2006-11-15 19:20 ` Stephen Hemminger
2006-11-15 22:35 ` Roland Dreier
2006-11-15 4:01 ` Benjamin Herrenschmidt
2006-11-15 4:07 ` David Miller
2006-11-15 7:23 ` Benjamin Herrenschmidt
2006-11-15 10:06 ` Segher Boessenkool
2006-11-15 4:23 ` Roland Dreier
2006-11-15 7:24 ` Benjamin Herrenschmidt
2006-11-15 4:04 ` Benjamin Herrenschmidt
2006-11-15 4:14 ` Jeff Garzik
2006-11-15 4:24 ` Roland Dreier
2006-11-15 2:58 ` Randy Dunlap
2006-11-15 3:10 ` D. Hazelton
2006-11-15 3:30 ` Jeff Garzik
2006-11-15 3:53 ` D. Hazelton
2006-11-15 11:40 ` Alan
2006-11-16 4:06 ` D. Hazelton
2006-11-16 0:17 Lu, Yinghai
-- strict thread matches above, loose matches on Subject: below --
2006-11-16 3:50 Lu, Yinghai
2006-11-16 23:36 ` Olivier Nicolas
2006-11-16 4:24 linux
2006-11-16 10:53 ` Alan
2006-11-16 16:05 ` Linus Torvalds
2006-11-16 4:25 Lu, Yinghai
2006-11-16 18:00 ` D. Hazelton
2006-11-16 23:54 Lu, Yinghai
2006-11-17 0:49 ` Olivier Nicolas
2006-11-17 17:42 Lu, Yinghai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=455B6F20.6050503@garzik.org \
--to=jeff@garzik.org \
--cc=Stephen.Clark@seclark.us \
--cc=arjan@infradead.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).