From: Dan Murphy <dmurphy@ti.com>
To: Wolfgang Grandegger <wg@grandegger.com>, <mkl@pengutronix.de>,
<davem@davemloft.net>
Cc: <linux-can@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v10 1/4] can: m_can: Create a m_can platform framework
Date: Tue, 19 Mar 2019 06:29:23 -0500 [thread overview]
Message-ID: <455ea343-818a-e647-6315-e8855ca43ad2@ti.com> (raw)
In-Reply-To: <0b9fc85a-25bc-d85e-83c9-bc974e0b44e5@grandegger.com>
Hello
On 3/19/19 1:24 AM, Wolfgang Grandegger wrote:
> Hello Dan,
>
> checkpatch still reports one "line over 80 characters".
>
Yes I saw that one before I submitted I was not happy with how it was to be resolved.
It made the line unreadable I will see how to fix it.
<snip>
>> +
>> + if (priv->is_peripheral) {
>> + if (priv->tx_skb) {
>> + netdev_err(dev, "hard_xmit called while tx busy\n");
>> + return NETDEV_TX_BUSY;
>> + }
>> +
>> + if (priv->can.state == CAN_STATE_BUS_OFF) {
>> + m_can_clean(dev);
>> + } else {
>
> Could you please add a comment here about stopping the queue early. I
> would also mention that an improved version may use an array of tx_skbs
> to support queueing of outgoing messages.
>
Ack
>> + priv->tx_skb = skb;
>> + netif_stop_queue(priv->net);
>> + queue_work(priv->tx_wq, &priv->tx_work);
>> + }
>> + } else {
>> + priv->tx_skb = skb;
>> + return m_can_tx_handler(priv);
>> }
>>
>> return NETDEV_TX_OK;
>> }
>
> At the next respin, you can then add my
>
> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
>
> to the Patch 1/1, 1/2 and 1/4.
>
> Thanks for your contribution and patience.
>
No worries. I am wrapping up tests on our side and see if there is any customer
feedback on this version. So far the tests look fine no changes.
I should have v11 out by the end of the week.
Latest cangen data for tcan is below.
bitrate 500000 dbitrate 2000000
cangen can0 -g 0 -i -f &
11118 transmitted frames (TXF)
11118 received frames (RXF)
0 matched frames (RXMF)
0 % total match ratio (RXMR)
442 frames/s total tx rate (TXR)
442 frames/s total rx rate (RXR)
0 % current match ratio (CRXMR)
117 frames/s current tx rate (CTXR)
123 frames/s current rx rate (CRXR)
0 % max match ratio (MRXMR)
498 frames/s max tx rate (MTXR)
488 frames/s max rx rate (MRXR)
0 current receive list entries (CRCV)
0 maximum receive list entries (MRCV)
> Wolfgang
>
--
------------------
Dan Murphy
prev parent reply other threads:[~2019-03-19 11:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-15 17:02 [PATCH v10 1/4] can: m_can: Create a m_can platform framework Dan Murphy
2019-03-15 17:02 ` [PATCH v10 2/4] can: m_can: Rename m_can_priv to m_can_classdev Dan Murphy
2019-03-15 17:02 ` [PATCH v10 3/4] dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver Dan Murphy
2019-03-15 17:02 ` [PATCH v10 4/4] can: tcan4x5x: Add tcan4x5x driver to the kernel Dan Murphy
2019-03-19 6:24 ` [PATCH v10 1/4] can: m_can: Create a m_can platform framework Wolfgang Grandegger
2019-03-19 11:29 ` Dan Murphy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=455ea343-818a-e647-6315-e8855ca43ad2@ti.com \
--to=dmurphy@ti.com \
--cc=davem@davemloft.net \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox