Re: suspend broken in 2.6.18.1

[Eric Sandall <eric@sandall.us>]

Pavel Machek wrote:
> On Mon 2006-10-16 15:25:52, Eric Sandall wrote:
>> Pavel Machek wrote:
>>> Hi!
>>>
>>>> After updating from 2.6.17.13 to 2.6.18 (using `make oldconfig`),
>>>> suspend no longer suspends my laptop (Dell Inspiron 5100).
>>>>
>>>> # s2ram -f
>>>> Switching from vt7 to vt1
>>>> s2ram_do: Invalid argument
>>>> switching back to vt7
>>>>
>>>> The screen blanks, but then comes back up after a few seconds. This
>>>> happens both with and without X running.
>>>>
>>>> I've attached the output of `lspci -vvv` and my
>>>> /usr/src/linux-2.6.18/.config for more information. Please let me know
>>>> if there are any patches to try or if more information is required.
>>> Relevant part of dmesg after failed attempt is neccessary... and you
>>> can probably read it yourself and figure what is wrong. I'd guess some
>>> device just failed to suspend... rmmod it.
>> (This is now with 2.6.18.1)
>>
>> Stopping tasks: =====================================================|
>> ACPI: PCI interrupt for device 0000:02:04.0 disabled
>> ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>> ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>> ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>> ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>> ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>> Class driver suspend failed for cpu0
>> Could not power down device firmware: error -22
>> Some devices failed to power down
>>
>> I've attached my entire dmesg as well.
> Try with 2.6.19-rcX.

s2ram is also working with 2.6.19-rc6, thank you. :)

-sandalle

-- 
Eric Sandall                     |  Source Mage GNU/Linux Developer
eric@sandall.us                  |  http://www.sourcemage.org/
http://eric.sandall.us/          |  SysAdmin @ Shock Physics @ WSU
http://counter.li.org/  #196285  |  http://www.shock.wsu.edu/