From: Tilman Schmidt <tilman@imap.cc>
To: Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org,
linux-fbdev-devel@lists.sourceforge.net
Subject: i810fb fails to load (was: 2.6.20-rc4-mm1)
Date: Mon, 15 Jan 2007 00:52:36 +0100 [thread overview]
Message-ID: <45AAC244.8060607@imap.cc> (raw)
In-Reply-To: <20070111222627.66bb75ab.akpm@osdl.org>
[-- Attachment #1: Type: text/plain, Size: 2502 bytes --]
With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my
Dell Optiplex GX110. Here's an excerpt of the diff between the boot logs
of 2.6.20-rc5 (working) and 2.6.20-rc4-mm1 (non-working):
@@ -4,7 +4,7 @@
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
-<5>Linux version 2.6.20-rc5-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #2 PREEMPT Sun Jan 14 23:37:12 CET 2007
+<5>Linux version 2.6.20-rc4-mm1-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #3 PREEMPT Sun Jan 14 21:08:56 CET 2007
<6>BIOS-provided physical RAM map:
<4>sanitize start
<4>sanitize end
@@ -188,7 +192,6 @@
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
-<7>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
<7>Boot video device is 0000:00:01.0
<4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
@@ -238,20 +241,15 @@
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Intel 82802 RNG detected
-<6>Linux agpgart interface v0.101 (c) Dave Jones
+<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>agpgart: Detected an Intel i810 E Chipset.
<6>agpgart: detected 4MB dedicated video ram.
<6>agpgart: AGP aperture is 64M @ 0xf8000000
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
<7>PCI: setting IRQ 9 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
-<4>i810-i2c: Probe DDC1 Bus
-<4>i810fb_init_pci: DDC probe successful
-<4>Console: switching to colour frame buffer device 160x64
-<4>I810FB: fb0 : Intel(R) 810E Framebuffer Device v0.9.0
-<4>I810FB: Video RAM : 4096K
-<4>I810FB: Monitor : H: 30-83 KHz V: 55-75 Hz
-<4>I810FB: Mode : 1280x1024-8bpp@60Hz
+<4>i810fb_alloc_fbmem: can't bind framebuffer memory
+<4>i810fb: probe of 0000:00:01.0 failed with error -16
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Please let me know if you need more information.
Thanks
Tilman
--
Tilman Schmidt E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]
next prev parent reply other threads:[~2007-01-14 23:48 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-12 6:26 2.6.20-rc4-mm1 Andrew Morton
2007-01-12 10:20 ` Early ACPI lockup (was Re: 2.6.20-rc4-mm1) Frederik Deweerdt
2007-01-12 22:53 ` Len Brown
2007-01-12 23:10 ` Frederik Deweerdt
2007-01-12 23:36 ` Jiri Slaby
2007-01-13 0:08 ` Michal Piotrowski
2007-01-13 0:45 ` Frederik Deweerdt
2007-01-13 0:43 ` Jiri Slaby
2007-01-12 10:25 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 13:18 ` 2.6.20-rc4-mm1 Frederik Deweerdt
2007-01-12 15:13 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 15:16 ` 2.6.20-rc4-mm1 Michal Piotrowski
2007-01-12 16:12 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 10:52 ` 'struct task_struct' has no member named 'mems_allowed' (was: Re: 2.6.20-rc4-mm1) Sander
2007-01-12 11:28 ` Paul Jackson
2007-01-12 19:25 ` Christoph Lameter
2007-01-12 21:20 ` Paul Jackson
2007-01-12 21:28 ` Christoph Lameter
2007-01-12 21:58 ` Paul Jackson
2007-01-12 22:00 ` Christoph Lameter
2007-01-12 22:10 ` Paul Jackson
2007-01-12 22:11 ` Andrew Morton
2007-01-12 11:55 ` spurious sparse warnings from linux/aio.h (was: 2.6.20-rc4-mm1) Tilman Schmidt
2007-01-12 13:11 ` Suparna Bhattacharya
2007-01-12 17:46 ` spurious sparse warnings from linux/aio.h Tilman Schmidt
2007-01-12 13:33 ` [-mm patch] remove tcp header from tcp_v4_check Frederik Deweerdt
2007-01-12 13:55 ` [-mm patch] remove tcp header from tcp_v4_check (take #2) Frederik Deweerdt
2007-02-05 0:44 ` David Miller
2007-01-13 7:27 ` 2.6.20-rc4-mm1: status of sn9c102_pas202bca? Adrian Bunk
2007-01-15 11:34 ` Mauro Carvalho Chehab
2007-01-13 9:56 ` [-mm patch] make mmc_sysfs.c:mmc_key_type static Adrian Bunk
2007-01-13 22:38 ` Pierre Ossman
2007-01-13 9:56 ` [-mm patch] make gfs2_change_nlink_i() static Adrian Bunk
2007-01-15 10:31 ` Steven Whitehouse
2007-01-16 21:04 ` [Cluster-devel] " Wendy Cheng
2007-01-16 21:29 ` Adrian Bunk
2007-01-14 9:10 ` 2.6.20-rc4-mm1: different values for OHCI_QUIRK_ZFMICRO Adrian Bunk
2007-01-14 14:36 ` David Brownell
2007-02-20 0:06 ` Adrian Bunk
2007-03-29 22:06 ` Randy Dunlap
2007-03-29 22:24 ` David Brownell
2007-05-08 22:17 ` [PATCH] " Randy Dunlap
2007-05-08 22:34 ` David Brownell
2007-05-08 22:37 ` Greg KH
2007-03-30 15:18 ` 2.6.20-rc4-mm1: " Tony Olech
2007-01-14 9:48 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 10:46 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 14:40 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 22:05 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 22:31 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 22:30 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-15 8:22 ` 2.6.20-rc4-mm1 Ingo Molnar
2007-01-15 23:55 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 22:20 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 23:52 ` Tilman Schmidt [this message]
2007-01-15 0:22 ` i810fb fails to load (was: 2.6.20-rc4-mm1) Andrew Morton
2007-01-22 13:42 ` i810fb fails to load Thomas Hellström
2007-01-22 18:30 ` Tilman Schmidt
2007-01-22 21:50 ` Dave Airlie
2007-01-23 8:10 ` Thomas Hellström
2007-01-18 21:55 ` [-mm patch] fs/unionfs/: possible cleanups Adrian Bunk
2007-01-20 22:06 ` Josef Sipek
2007-01-19 18:40 ` [-mm patch] drivers/mtd/ubi/: " Adrian Bunk
2007-01-21 11:23 ` Artem Bityutskiy
2007-01-20 22:38 ` [-mm patch] oops in drivers/net/shaper.c Frederik Deweerdt
2007-01-21 19:13 ` [-mm patch] remove one remaining "#define BCM_TSO 1" Adrian Bunk
2007-01-22 18:17 ` [-mm patch] drivers/firewire/: cleanups Adrian Bunk
2007-01-22 19:41 ` Kristian Høgsberg
2007-01-22 20:04 ` Adrian Bunk
2007-01-22 20:04 ` Kristian Høgsberg
2007-01-22 20:44 ` Stefan Richter
2007-01-23 6:02 ` `make htmldocs` fails Don Mullis
2007-01-23 6:22 ` Randy Dunlap
2007-01-23 6:45 ` `make htmldocs` fails -- 2.6.20-rc4-mm1 Don Mullis
2007-01-23 6:35 ` `make htmldocs` fails Greg KH
2007-01-24 13:53 ` 2.6.20-rc4-mm1: PCI=n: drivers/net/3c59x.c compile error Adrian Bunk
2007-01-24 14:12 ` Sergei Shtylyov
2007-02-17 19:26 ` Sergei Shtylyov
2007-02-17 19:32 ` Sergei Shtylyov
2007-02-26 13:22 ` Sergei Shtylyov
2007-02-26 17:26 ` Randy Dunlap
2007-02-26 21:14 ` Greg KH
2007-03-06 16:15 ` Sergei Shtylyov
2007-03-06 16:47 ` Randy Dunlap
2007-03-09 12:54 ` Tejun Heo
2007-01-24 22:36 ` [-mm patch] MTD_CK804XROM must depend on PCI Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45AAC244.8060607@imap.cc \
--to=tilman@imap.cc \
--cc=akpm@osdl.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox