* OnStream DI30: undescriptive message: CoD != 0 in idescsi_pc_intr
@ 2007-01-21 2:14 Bauke Jan Douma
2007-01-22 0:37 ` Randy Dunlap
0 siblings, 1 reply; 2+ messages in thread
From: Bauke Jan Douma @ 2007-01-21 2:14 UTC (permalink / raw)
To: linux-kernel, osst, osst-users
OnStream Di30 (using ide-scsi and osst drivers), when reading
or writing I regularly get these kernel messages:
<3>ide-scsi: CoD != 0 in idescsi_pc_intr
Let's assume flaky hardware; nothing we can hold the kernel to
blame for (which is 2.6.19.1) -- it's a good thing it's calling
our attention. There's no data corruption, btw.
However, said message is quite useless because undescriptive
and too terse.
bjd
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: OnStream DI30: undescriptive message: CoD != 0 in idescsi_pc_intr
2007-01-21 2:14 OnStream DI30: undescriptive message: CoD != 0 in idescsi_pc_intr Bauke Jan Douma
@ 2007-01-22 0:37 ` Randy Dunlap
0 siblings, 0 replies; 2+ messages in thread
From: Randy Dunlap @ 2007-01-22 0:37 UTC (permalink / raw)
To: bjdouma; +Cc: linux-kernel, osst, osst-users, scsi
On Sun, 21 Jan 2007 03:14:33 +0100 Bauke Jan Douma wrote:
> OnStream Di30 (using ide-scsi and osst drivers), when reading
> or writing I regularly get these kernel messages:
>
> <3>ide-scsi: CoD != 0 in idescsi_pc_intr
>
> Let's assume flaky hardware; nothing we can hold the kernel to
> blame for (which is 2.6.19.1) -- it's a good thing it's calling
> our attention. There's no data corruption, btw.
>
> However, said message is quite useless because undescriptive
> and too terse.
Not sure that this helps much.
---
From: Randy Dunlap <randy.dunlap@oracle.com>
Expand on a terse ide-scsi message.
Something is confused.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
drivers/scsi/ide-scsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-2619-work.orig/drivers/scsi/ide-scsi.c
+++ linux-2619-work/drivers/scsi/ide-scsi.c
@@ -528,7 +528,7 @@ static ide_startstop_t idescsi_pc_intr (
ireason.all = HWIF(drive)->INB(IDE_IREASON_REG);
if (ireason.b.cod) {
- printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
+ printk(KERN_ERR "ide-scsi: CoD(Command/Data flag) != 0(Data) in idescsi_pc_intr\n");
return ide_do_reset (drive);
}
if (ireason.b.io) {
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-01-22 0:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-21 2:14 OnStream DI30: undescriptive message: CoD != 0 in idescsi_pc_intr Bauke Jan Douma
2007-01-22 0:37 ` Randy Dunlap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox