Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

Hi Serge,

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 
> It contains the following patches against 2.6.20-rc6:
> 
> origin.patch
[..]
> namespaces-fix-exit-race-by-splitting-exit.patch
[..]

I'm receiving an error

In file included from /mnt/md0/devel/linux-work5/include/linux/sched.h:87,
                 from /mnt/md0/devel/linux-work5/include/linux/utsname.h:35,
                 from include2/asm/elf.h:12,
                 from /mnt/md0/devel/linux-work5/include/linux/elf.h:7,
                 from /mnt/md0/devel/linux-work5/include/linux/module.h:15,
                 from /mnt/md0/devel/linux-work5/include/linux/crypto.h:21,
                 from /mnt/md0/devel/linux-work5/arch/i386/kernel/asm-offsets.c:7:
/mnt/md0/devel/linux-work5/include/linux/nsproxy.h: In function 'preexit_task_namespaces':
/mnt/md0/devel/linux-work5/include/linux/nsproxy.h:56: error: dereferencing pointer to incomplete type
make[2]: *** [arch/i386/kernel/asm-offsets.s] Error 1
make[1]: *** [prepare0] Error 2
make: *** [_all] Error 2

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc6-mm1
# Fri Jan 26 15:53:24 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_TASK_XACCT is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_CLASSIC_RCU is not set
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_TRACE=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_DEBUG_READAHEAD is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
CONFIG_PM_TRACE=y
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/sda2"
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_WIRELESS_EXT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_BLINK is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FW is not set
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set

#
# SPI Protocol Masters
#

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# SoC audio support
#
# CONFIG_SND_SOC is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_PASSWORDS is not set
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set

#
# RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_TEST=m
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set

#
# Virtualization
#
# CONFIG_KVM is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_UNION_FS=m
CONFIG_UNION_FS_XATTR=y

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Distributed Lock Manager
#

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
# CONFIG_KWATCH is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_FRAME_POINTER=y
CONFIG_PROFILE_LIKELY=y
CONFIG_FORCED_INLINING=y
CONFIG_DEBUG_SYNCHRO_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y

#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_DEBUG_RODATA=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_PARAVIRT=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_INTEGRITY is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FS_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_NO_IDLE_HZ=y

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Serge E. Hallyn]

Quoting Michal Piotrowski (michal.k.k.piotrowski@gmail.com):
> Hi Serge,
> 
> akpm@osdl.org napisa?(a):
> > The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> > 
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> > 
> > It contains the following patches against 2.6.20-rc6:
> > 
> > origin.patch
> [..]
> > namespaces-fix-exit-race-by-splitting-exit.patch
> [..]
> 
> I'm receiving an error
> 
> In file included from /mnt/md0/devel/linux-work5/include/linux/sched.h:87,
>                  from /mnt/md0/devel/linux-work5/include/linux/utsname.h:35,
>                  from include2/asm/elf.h:12,
>                  from /mnt/md0/devel/linux-work5/include/linux/elf.h:7,
>                  from /mnt/md0/devel/linux-work5/include/linux/module.h:15,
>                  from /mnt/md0/devel/linux-work5/include/linux/crypto.h:21,
>                  from /mnt/md0/devel/linux-work5/arch/i386/kernel/asm-offsets.c:7:
> /mnt/md0/devel/linux-work5/include/linux/nsproxy.h: In function 'preexit_task_namespaces':
> /mnt/md0/devel/linux-work5/include/linux/nsproxy.h:56: error: dereferencing pointer to incomplete type
> make[2]: *** [arch/i386/kernel/asm-offsets.s] Error 1
> make[1]: *** [prepare0] Error 2
> make: *** [_all] Error 2
> 
> Regards,
> Michal

Sorry, I don't know where to get a series file for this patchset?

It sounds like your tree doesn't #include <linux/sched.h> at the top of
include/linux/nsproxy.h.  That was added by a separate patch I think
last week - a few architectures (which i was testing) had a #include chain
which ended up in sched.h being included free, but some arches had a
different chain.

Anyway please try #include <linux/sched.h> at the top of
include/linux/nsproxy.h and let me know if that doesn't fix the problem.

thanks,
-serge

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Serge E. Hallyn]

Quoting Serge E. Hallyn (serue@us.ibm.com):
> Quoting Michal Piotrowski (michal.k.k.piotrowski@gmail.com):
> > Hi Serge,
> > 
> > akpm@osdl.org napisa?(a):
> > > The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> > > 
> > >    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> > > 
> > > It contains the following patches against 2.6.20-rc6:
> > > 
> > > origin.patch
> > [..]
> > > namespaces-fix-exit-race-by-splitting-exit.patch
> > [..]
> > 
> > I'm receiving an error
> > 
> > In file included from /mnt/md0/devel/linux-work5/include/linux/sched.h:87,
> >                  from /mnt/md0/devel/linux-work5/include/linux/utsname.h:35,
> >                  from include2/asm/elf.h:12,
> >                  from /mnt/md0/devel/linux-work5/include/linux/elf.h:7,
> >                  from /mnt/md0/devel/linux-work5/include/linux/module.h:15,
> >                  from /mnt/md0/devel/linux-work5/include/linux/crypto.h:21,
> >                  from /mnt/md0/devel/linux-work5/arch/i386/kernel/asm-offsets.c:7:
> > /mnt/md0/devel/linux-work5/include/linux/nsproxy.h: In function 'preexit_task_namespaces':
> > /mnt/md0/devel/linux-work5/include/linux/nsproxy.h:56: error: dereferencing pointer to incomplete type
> > make[2]: *** [arch/i386/kernel/asm-offsets.s] Error 1
> > make[1]: *** [prepare0] Error 2
> > make: *** [_all] Error 2
> > 
> > Regards,
> > Michal
> 
> Sorry, I don't know where to get a series file for this patchset?
> 
> It sounds like your tree doesn't #include <linux/sched.h> at the top of
> include/linux/nsproxy.h.  That was added by a separate patch I think
> last week - a few architectures (which i was testing) had a #include chain
> which ended up in sched.h being included free, but some arches had a
> different chain.
> 
> Anyway please try #include <linux/sched.h> at the top of
> include/linux/nsproxy.h and let me know if that doesn't fix the problem.

No, I just found Cedric's patch removing the include.

So moving preexit_task_namespaces() into nsproxy.c is the right way to
go.

thanks,
-serge

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

Serge E. Hallyn napisał(a):
> Quoting Serge E. Hallyn (serue@us.ibm.com):
>> Quoting Michal Piotrowski (michal.k.k.piotrowski@gmail.com):
>>> Hi Serge,
>>>
>>> akpm@osdl.org napisa?(a):
>>>> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>>>>
>>>>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
>>>>
>>>> It contains the following patches against 2.6.20-rc6:
>>>>
>>>> origin.patch
>>> [..]
>>>> namespaces-fix-exit-race-by-splitting-exit.patch
>>> [..]
>>>
>>> I'm receiving an error
>>>
>>> In file included from /mnt/md0/devel/linux-work5/include/linux/sched.h:87,
>>>                  from /mnt/md0/devel/linux-work5/include/linux/utsname.h:35,
>>>                  from include2/asm/elf.h:12,
>>>                  from /mnt/md0/devel/linux-work5/include/linux/elf.h:7,
>>>                  from /mnt/md0/devel/linux-work5/include/linux/module.h:15,
>>>                  from /mnt/md0/devel/linux-work5/include/linux/crypto.h:21,
>>>                  from /mnt/md0/devel/linux-work5/arch/i386/kernel/asm-offsets.c:7:
>>> /mnt/md0/devel/linux-work5/include/linux/nsproxy.h: In function 'preexit_task_namespaces':
>>> /mnt/md0/devel/linux-work5/include/linux/nsproxy.h:56: error: dereferencing pointer to incomplete type
>>> make[2]: *** [arch/i386/kernel/asm-offsets.s] Error 1
>>> make[1]: *** [prepare0] Error 2
>>> make: *** [_all] Error 2
>>>
>>> Regards,
>>> Michal
>> Sorry, I don't know where to get a series file for this patchset?
>>
>> It sounds like your tree doesn't #include <linux/sched.h> at the top of
>> include/linux/nsproxy.h.  That was added by a separate patch I think
>> last week - a few architectures (which i was testing) had a #include chain
>> which ended up in sched.h being included free, but some arches had a
>> different chain.
>>
>> Anyway please try #include <linux/sched.h> at the top of
>> include/linux/nsproxy.h and let me know if that doesn't fix the problem.
> 
> No, I just found Cedric's patch removing the include.
> 
> So moving preexit_task_namespaces() into nsproxy.c is the right way to
> go.
> 
> thanks,
> -serge
> 

Thanks!

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Build fix.

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

diff -uprN linux-work-clean/include/linux/nsproxy.h linux-work/include/linux/nsproxy.h
--- linux-work-clean/include/linux/nsproxy.h	2007-01-26 16:47:55.000000000 +0100
+++ linux-work/include/linux/nsproxy.h	2007-01-26 17:00:54.000000000 +0100
@@ -51,11 +51,6 @@ static inline void put_and_finalize_nspr
 	finalize_put_nsproxy(put_nsproxy(ns));
 }

-static inline struct nsproxy *preexit_task_namespaces(struct task_struct *p)
-{
-	return put_nsproxy(p->nsproxy);
-}
-
 extern void exit_task_namespaces(struct task_struct *p);

 #endif
diff -uprN linux-work-clean/kernel/nsproxy.c linux-work/kernel/nsproxy.c
--- linux-work-clean/kernel/nsproxy.c	2007-01-26 16:53:49.000000000 +0100
+++ linux-work/kernel/nsproxy.c	2007-01-26 17:01:14.000000000 +0100
@@ -196,3 +196,8 @@ struct mnt_namespace *get_task_mnt_ns(st

 	return mnt_ns;
 }
+
+static inline struct nsproxy *preexit_task_namespaces(struct task_struct *p)
+{
+	return put_nsproxy(p->nsproxy);
+}

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
>

Another build error...

LANG="C" make O=../linux-work-obj/
  Using /mnt/md0/devel/linux-work6 as source for kernel
  GEN     /mnt/md0/devel/linux-work-obj/Makefile
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  CHK     include/linux/compile.h
  HOSTCC  usr/gen_init_cpio
/mnt/md0/devel/linux-work6/usr/gen_init_cpio.c:515: fatal error:
opening dependency file usr/.gen_init_cpio.d: Permission denied
compilation terminated.
make[2]: *** [usr/gen_init_cpio] Error 1
make[1]: *** [usr] Error 2
make: *** [_all] Error 2

"make" works fine, "make O=/dir" not.

"cat patches/usr-gen_init_cpioc-support-for-hard-links.patch | patch
-p1 -R" doesn't solve the problem.

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

Yet another build error

In file included from arch/i386/kernel/process.c:56:
include/asm/debugreg.h:84: error: expected identifier or '(' before '{' token
make[1]: *** [arch/i386/kernel/process.o] Error 1
make: *** [arch/i386/kernel] Error 2

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/include/asm-i386/debugreg.h	2007-01-26 16:47:41.000000000 +0100
+++ linux-work/include/asm-i386/debugreg.h	2007-01-26 17:39:58.000000000 +0100
@@ -80,7 +80,7 @@ extern int enable_debugreg(unsigned long

 #else

-static inline void set_process_debugreg7(unsigned long new_dr7);
+static inline void set_process_debugreg7(unsigned long new_dr7)
 {
 	set_debugreg(new_dr7, 7);
 }

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

kernel/sched.c: In function 'init_sched_domain_sysctl':
kernel/sched.c:5465: error: too many arguments to function 'register_sysctl_table'
make[1]: *** [kernel/sched.o] Error 1
make: *** [kernel] Error 2

Possible fix

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/kernel/sched.c	2007-01-26 16:47:55.000000000 +0100
+++ linux-work/kernel/sched.c	2007-01-26 17:51:23.000000000 +0100
@@ -5462,7 +5462,7 @@ static void init_sched_domain_sysctl(voi
 		entry->mode = 0755;
 		entry->child = sd_alloc_ctl_cpu_table(i);
 	}
-	sd_sysctl_header = register_sysctl_table(sd_ctl_root, 0);
+	sd_sysctl_header = register_sysctl_table(sd_ctl_root);
 }
 #else
 static void init_sched_domain_sysctl(void)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

kernel/exit.c: In function 'do_exit':
kernel/exit.c:941: warning: implicit declaration of function 'preexit_task_namespaces'
kernel/exit.c:941: warning: assignment makes pointer from integer without a cast
kernel/exit.c:943: error: too many arguments to function 'exit_task_namespaces'
make[1]: *** [kernel/exit.o] Error 1
make: *** [kernel] Error 2

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/include/linux/nsproxy.h	2007-01-26 17:40:29.000000000 +0100
+++ linux-work/include/linux/nsproxy.h	2007-01-26 18:23:19.000000000 +0100
@@ -51,6 +51,6 @@ static inline void put_and_finalize_nspr
 	finalize_put_nsproxy(put_nsproxy(ns));
 }

-extern void exit_task_namespaces(struct task_struct *p);
+extern void exit_task_namespaces(struct task_struct *p, struct nsproxy *ns);

 #endif

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Serge E. Hallyn]

Quoting Michal Piotrowski (michal.k.k.piotrowski@gmail.com):
> akpm@osdl.org napisa?(a):
> > The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> > 
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 
> kernel/exit.c: In function 'do_exit':
> kernel/exit.c:941: warning: implicit declaration of function 'preexit_task_namespaces'
> kernel/exit.c:941: warning: assignment makes pointer from integer without a cast
> kernel/exit.c:943: error: too many arguments to function 'exit_task_namespaces'
> make[1]: *** [kernel/exit.o] Error 1
> make: *** [kernel] Error 2
> 
> Regards,
> Michal
> 
> --
> Michal K. K. Piotrowski
> LTG - Linux Testers Group
> (http://www.stardust.webpages.pl/ltg/)
> 
> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
> 
> --- linux-work-clean/include/linux/nsproxy.h	2007-01-26 17:40:29.000000000 +0100
> +++ linux-work/include/linux/nsproxy.h	2007-01-26 18:23:19.000000000 +0100
> @@ -51,6 +51,6 @@ static inline void put_and_finalize_nspr
>  	finalize_put_nsproxy(put_nsproxy(ns));
>  }
> 
> -extern void exit_task_namespaces(struct task_struct *p);
> +extern void exit_task_namespaces(struct task_struct *p, struct nsproxy *ns);
> 
>  #endif

Can you send me your series file for broken-out-2007-01-26-00-36.tar.gz,
and I'll try to iron these out?  This is due to an older patch of
Cedric's being applied at the same time as the preexit_task_namespaces
one, and I just need to properly integrate them.

thanks,
-serge

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 26/01/07, Serge E. Hallyn <serue@us.ibm.com> wrote:
> Can you send me your series file for broken-out-2007-01-26-00-36.tar.gz,
> and I'll try to iron these out?  This is due to an older patch of
> Cedric's being applied at the same time as the preexit_task_namespaces
> one, and I just need to properly integrate them.

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

Series file is in the archive, but not in broken-out dir as usually.

$ tar zxvf broken-out-2007-01-26-00-36.tar.gz
$ ls
broken-out  broken-out-2007-01-26-00-36.tar.gz series

http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/series

>
> thanks,
> -serge
>

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Serge E. Hallyn]

Quoting Michal Piotrowski (michal.k.k.piotrowski@gmail.com):
> On 26/01/07, Serge E. Hallyn <serue@us.ibm.com> wrote:
> >Can you send me your series file for broken-out-2007-01-26-00-36.tar.gz,
> >and I'll try to iron these out?  This is due to an older patch of
> >Cedric's being applied at the same time as the preexit_task_namespaces
> >one, and I just need to properly integrate them.
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 
> Series file is in the archive, but not in broken-out dir as usually.

Ah!  Sorry.

Ok, this patch should hopefully resolve the conflict between the two
patches, however I can't compile due to some noisy atomic64_xchg
problem and a few other failures.

-serge

From: "Serge E. Hallyn" <serue@us.ibm.com>
Subject: [PATCH] namespaces: resolve conflicts between two patches

Two patches affecting nsproxy conflicted preventing compilation.
Hopefully this resolves all the problems.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>

---

 include/linux/nsproxy.h |    8 ++------
 kernel/nsproxy.c        |    5 +++++
 2 files changed, 7 insertions(+), 6 deletions(-)

300377d87b9889b5c2f5822bfb458f00ef3addd5
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
index 45f68de..d519290 100644
--- a/include/linux/nsproxy.h
+++ b/include/linux/nsproxy.h
@@ -51,11 +51,7 @@ static inline void put_and_finalize_nspr
 	finalize_put_nsproxy(put_nsproxy(ns));
 }
 
-static inline struct nsproxy *preexit_task_namespaces(struct task_struct *p)
-{
-	return put_nsproxy(p->nsproxy);
-}
-
-extern void exit_task_namespaces(struct task_struct *p);
+extern struct nsproxy *preexit_task_namespaces(struct task_struct *p);
+extern void exit_task_namespaces(struct task_struct *p, struct nsproxy *ns);
 
 #endif
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index afdb9fb..bbe94df 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -167,6 +167,11 @@ struct nsproxy *put_nsproxy(struct nspro
 	return NULL;
 }
 
+struct nsproxy *preexit_task_namespaces(struct task_struct *p)
+{
+	return put_nsproxy(p->nsproxy);
+}
+
 void free_nsproxy(struct nsproxy *ns)
 {
 	if (ns->mnt_ns)
-- 
1.1.6

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

kernel/sys.c:359: error: conflicting types for '__blocking_notifier_call_chain'
include/linux/notifier.h:140: error: previous declaration of '__blocking_notifier_call_chain' was here
kernel/sys.c:375: error: conflicting types for '__blocking_notifier_call_chain'
include/linux/notifier.h:140: error: previous declaration of '__blocking_notifier_call_chain' was here
make[1]: *** [kernel/sys.o] Error 1
make: *** [kernel] Error 2

Possible fix.

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/kernel/sys.c	2007-01-26 16:47:56.000000000 +0100
+++ linux-work/kernel/sys.c	2007-01-26 18:40:30.000000000 +0100
@@ -355,7 +355,7 @@ EXPORT_SYMBOL_GPL(blocking_notifier_chai

 int __blocking_notifier_call_chain(struct blocking_notifier_head *nh,
 				   unsigned long val, void *v,
-				   int nr_to_call, unsigned int *nr_calls)
+				   int nr_to_call, int *nr_calls)
 {
 	int ret = NOTIFY_DONE;

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

Hi Christoph,

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

use-zvc-for-free_pages.patch
breaks swsusp

kernel/power/swsusp.c: In function 'swsusp_shrink_memory':
kernel/power/swsusp.c:233: error: 'struct zone' has no member named 'free_pages'
kernel/power/swsusp.c:235: error: 'struct zone' has no member named 'free_pages'
make[2]: *** [kernel/power/swsusp.o] Error 1
make[1]: *** [kernel/power] Error 2
make: *** [kernel] Error 2

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Christoph Lameter]

On Fri, 26 Jan 2007, Michal Piotrowski wrote:

> mm/page_alloc.c: In function 'nr_free_inactive_pages_node':
> mm/page_alloc.c:1588: error: 'struct zone' has no member named 'nr_inactive'
> mm/page_alloc.c:1589: error: 'struct zone' has no member named 'free_pages'
> make[1]: *** [mm/page_alloc.o] Error 1
> make: *** [mm] Error 2

I cannot get it to compile either:

christoph@schroedinger:~/software/linux/xx/linux-2.6.20-rc6$ make 
mm/page_alloc.o
scripts/kconfig/conf -s arch/i386/Kconfig
Warning! Found recursive dependency: INET GFS2_FS_LOCKING_DLM SYSFS 
OCFS2_FS INET
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  CC      arch/i386/kernel/asm-offsets.s
In file included from include/linux/sched.h:87,
                 from include/linux/utsname.h:35,
                 from include/asm/elf.h:12,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:15,
                 from include/linux/crypto.h:21,
                 from arch/i386/kernel/asm-offsets.c:7:
include/linux/nsproxy.h: In function 'preexit_task_namespaces':
include/linux/nsproxy.h:56: error: dereferencing pointer to incomplete 
type
make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2

but I would think that this would fix the compile errors that are my 
responsibility (sort of .... patch was against rc6 and not against mm).
More when I track down the above issue:


mm-fixes to ZVC patches

Fix uses of free_pages

Signed-off-by: Christoph Lameter <clameter@sgi.com>

Index: linux-2.6.20-rc6/kernel/power/swsusp.c
===================================================================
--- linux-2.6.20-rc6.orig/kernel/power/swsusp.c	2007-01-26 10:32:05.000000000 -0800
+++ linux-2.6.20-rc6/kernel/power/swsusp.c	2007-01-26 10:32:24.000000000 -0800
@@ -230,7 +230,8 @@ int swsusp_shrink_memory(void)
 		for_each_zone (zone)
 			if (populated_zone(zone)) {
 				if (is_highmem(zone)) {
-					highmem_size -= zone->free_pages;
+					highmem_size -=
+					zone_page_state(zone, NR_FREE_PAGES);
 				} else {
 					tmp -= zone->free_pages;
 					tmp += zone->lowmem_reserve[ZONE_NORMAL];
Index: linux-2.6.20-rc6/mm/page_alloc.c
===================================================================
--- linux-2.6.20-rc6.orig/mm/page_alloc.c	2007-01-26 10:32:19.000000000 -0800
+++ linux-2.6.20-rc6/mm/page_alloc.c	2007-01-26 10:32:27.000000000 -0800
@@ -1581,12 +1581,12 @@ unsigned int nr_free_pagecache_pages(voi
 unsigned long nr_free_inactive_pages_node(int nid)
 {
 	enum zone_type i;
-	unsigned long sum = 0;
+	unsigned long sum = node_page_state(nid, NR_FREE_PAGES)
+				+ node_page_state(nid, NR_INACTIVE);
 	struct zone *zones = NODE_DATA(nid)->node_zones;
 
 	for (i = 0; i < MAX_NR_ZONES; i++)
-		sum += zones[i].nr_inactive +
-			zones[i].free_pages - zones[i].pages_low;
+		sum -= zones[i].pages_low;
 
 	return sum;
 }

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Pavel Machek]

Hi!

> but I would think that this would fix the compile errors that are my 
> responsibility (sort of .... patch was against rc6 and not against mm).
> More when I track down the above issue:

...

> Signed-off-by: Christoph Lameter <clameter@sgi.com>
> 
> Index: linux-2.6.20-rc6/kernel/power/swsusp.c
> ===================================================================
> --- linux-2.6.20-rc6.orig/kernel/power/swsusp.c	2007-01-26 10:32:05.000000000 -0800
> +++ linux-2.6.20-rc6/kernel/power/swsusp.c	2007-01-26 10:32:24.000000000 -0800
> @@ -230,7 +230,8 @@ int swsusp_shrink_memory(void)
>  		for_each_zone (zone)
>  			if (populated_zone(zone)) {
>  				if (is_highmem(zone)) {
> -					highmem_size -= zone->free_pages;
> +					highmem_size -=
> +					zone_page_state(zone, NR_FREE_PAGES);
>  				} else {
>  					tmp -= zone->free_pages;

Does last line need similar conversion, too?
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 26/01/07, Christoph Lameter <clameter@sgi.com> wrote:
> On Fri, 26 Jan 2007, Michal Piotrowski wrote:
>
> > mm/page_alloc.c: In function 'nr_free_inactive_pages_node':
> > mm/page_alloc.c:1588: error: 'struct zone' has no member named 'nr_inactive'
> > mm/page_alloc.c:1589: error: 'struct zone' has no member named 'free_pages'
> > make[1]: *** [mm/page_alloc.o] Error 1
> > make: *** [mm] Error 2
>
> I cannot get it to compile either:
>
> christoph@schroedinger:~/software/linux/xx/linux-2.6.20-rc6$ make
> mm/page_alloc.o
> scripts/kconfig/conf -s arch/i386/Kconfig
> Warning! Found recursive dependency: INET GFS2_FS_LOCKING_DLM SYSFS
> OCFS2_FS INET
>   CHK     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   CC      arch/i386/kernel/asm-offsets.s
> In file included from include/linux/sched.h:87,
>                  from include/linux/utsname.h:35,
>                  from include/asm/elf.h:12,
>                  from include/linux/elf.h:7,
>                  from include/linux/module.h:15,
>                  from include/linux/crypto.h:21,
>                  from arch/i386/kernel/asm-offsets.c:7:
> include/linux/nsproxy.h: In function 'preexit_task_namespaces':
> include/linux/nsproxy.h:56: error: dereferencing pointer to incomplete
> type
> make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1
> make: *** [prepare0] Error 2

Please try patches from
http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/

http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/bugs_and_patches.txt

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Christoph Lameter]

On Fri, 26 Jan 2007, Michal Piotrowski wrote:

> Please try patches from
> http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/
> 
> http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/bugs_and_patches.txt

Ahh. Okay that fixes most of the issues


ZVC writeback: Fix mm and other issues

This deals with swap prefetch and various things changed in mm.

Signed-off-by: Christoph Lameter <clameter@sgi.com>

Index: linux-2.6.20-rc6/kernel/power/swsusp.c
===================================================================
--- linux-2.6.20-rc6.orig/kernel/power/swsusp.c	2007-01-26 10:32:05.000000000 -0800
+++ linux-2.6.20-rc6/kernel/power/swsusp.c	2007-01-26 10:51:56.000000000 -0800
@@ -230,9 +230,10 @@ int swsusp_shrink_memory(void)
 		for_each_zone (zone)
 			if (populated_zone(zone)) {
 				if (is_highmem(zone)) {
-					highmem_size -= zone->free_pages;
+					highmem_size -=
+					zone_page_state(zone, NR_FREE_PAGES);
 				} else {
-					tmp -= zone->free_pages;
+					tmp -= zone_page_state(zone, NR_FREE_PAGES);
 					tmp += zone->lowmem_reserve[ZONE_NORMAL];
 					tmp += snapshot_additional_pages(zone);
 				}
Index: linux-2.6.20-rc6/mm/page_alloc.c
===================================================================
--- linux-2.6.20-rc6.orig/mm/page_alloc.c	2007-01-26 10:32:19.000000000 -0800
+++ linux-2.6.20-rc6/mm/page_alloc.c	2007-01-26 10:48:04.000000000 -0800
@@ -1581,12 +1581,12 @@ unsigned int nr_free_pagecache_pages(voi
 unsigned long nr_free_inactive_pages_node(int nid)
 {
 	enum zone_type i;
-	unsigned long sum = 0;
+	unsigned long sum = node_page_state(nid, NR_FREE_PAGES)
+				+ node_page_state(nid, NR_INACTIVE);
 	struct zone *zones = NODE_DATA(nid)->node_zones;
 
 	for (i = 0; i < MAX_NR_ZONES; i++)
-		sum += zones[i].nr_inactive +
-			zones[i].free_pages - zones[i].pages_low;
+		sum -= zones[i].pages_low;
 
 	return sum;
 }
@@ -1634,7 +1634,8 @@ void si_meminfo_node(struct sysinfo *val
 	val->freeram = node_page_state(nid, NR_FREE_PAGES);
 #ifdef CONFIG_HIGHMEM
 	val->totalhigh = pgdat->node_zones[ZONE_HIGHMEM].present_pages;
-	val->freehigh = pgdat->node_zones[ZONE_HIGHMEM].free_pages;
+	val->freehigh = zone_page_state(&pgdat->node_zones[ZONE_HIGHMEM],
+			NR_FREE_PAGES);
 #else
 	val->totalhigh = 0;
 	val->freehigh = 0;
Index: linux-2.6.20-rc6/mm/swap_prefetch.c
===================================================================
--- linux-2.6.20-rc6.orig/mm/swap_prefetch.c	2007-01-26 10:51:53.000000000 -0800
+++ linux-2.6.20-rc6/mm/swap_prefetch.c	2007-01-26 10:51:56.000000000 -0800
@@ -281,7 +281,7 @@ static void examine_free_limits(void)
 		ns->lowfree[idx] = z->pages_high * 3;
 		ns->highfree[idx] = ns->lowfree[idx] + z->pages_high;
 
-		if (z->free_pages > ns->highfree[idx]) {
+		if (zone_page_state(z, NR_FREE_PAGES) > ns->highfree[idx]) {
 			/*
 			 * We've gotten above the high watermark of free pages
 			 * so we can start prefetching till we get to the low
@@ -338,7 +338,7 @@ static int prefetch_suitable(void)
 		ns = &sp_stat.node[node];
 		idx = zone_idx(z);
 
-		free = z->free_pages;
+		free = zone_page_state(z, NR_FREE_PAGES);
 		if (free < *ns->pointfree[idx]) {
 			/*
 			 * Free pages have dropped below the low watermark so
Index: linux-2.6.20-rc6/include/linux/mm_inline.h
===================================================================
--- linux-2.6.20-rc6.orig/include/linux/mm_inline.h	2007-01-26 10:58:53.000000000 -0800
+++ linux-2.6.20-rc6/include/linux/mm_inline.h	2007-01-26 10:58:59.000000000 -0800
@@ -16,7 +16,7 @@ static inline void
 add_page_to_inactive_list_tail(struct zone *zone, struct page *page)
 {
 	list_add_tail(&page->lru, &zone->inactive_list);
-	zone->nr_inactive++;
+	__inc_zone_state(zone, NR_INACTIVE);
 }
 
 static inline void

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

Christoph Lameter napisał(a):
> On Fri, 26 Jan 2007, Michal Piotrowski wrote:
> 
>> Please try patches from
>> http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/
>>
>> http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/bugs_and_patches.txt
> 
> Ahh. Okay that fixes most of the issues
> 
> 
> ZVC writeback: Fix mm and other issues
> 
> This deals with swap prefetch and various things changed in mm.
> 

Additional fix

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/kernel/power/snapshot.c	2007-01-26 16:45:32.000000000 +0100
+++ linux-work/kernel/power/snapshot.c	2007-01-26 20:17:09.000000000 +0100
@@ -591,7 +591,7 @@ static unsigned int count_free_highmem_p

 	for_each_zone(zone)
 		if (populated_zone(zone) && is_highmem(zone))
-			cnt += zone->free_pages;
+			cnt += zone_page_state(zone, NR_FREE_PAGES);

 	return cnt;
 }
@@ -869,7 +869,7 @@ static int enough_free_mem(unsigned int
 	for_each_zone(zone) {
 		meta += snapshot_additional_pages(zone);
 		if (!is_highmem(zone))
-			free += zone->free_pages;
+			free += zone_page_state(zone, NR_FREE_PAGES);
 	}

 	nr_pages += count_pages_for_highmem(nr_highmem);

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

security/selinux/hooks.c: In function 'selinux_sysctl':
security/selinux/hooks.c:1440: error: 'ctl_table' has no member named 'de'
make[2]: *** [security/selinux/hooks.o] Error 1
make[1]: *** [security/selinux] Error 2
make: *** [security] Error 2

Sysctl patches?

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Andrew Morton]

On Sat, 27 Jan 2007 00:23:47 +0100
"Michal Piotrowski" <michal.k.k.piotrowski@gmail.com> wrote:

> On 26/01/07, Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
> > akpm@osdl.org napisał(a):
> > > The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> > >
> > >    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> >
> > security/selinux/hooks.c: In function 'selinux_sysctl':
> > security/selinux/hooks.c:1440: error: 'ctl_table' has no member named 'de'
> > make[2]: *** [security/selinux/hooks.o] Error 1
> > make[1]: *** [security/selinux] Error 2
> > make: *** [security] Error 2
> >
> > Sysctl patches?
> 
> Thanks Eric, it builds fine.
> 

It doesn't for me.  What did you change?  Did you receive some unseen-by-me patch
from Eric?

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

Andrew Morton napisał(a):
> On Sat, 27 Jan 2007 00:23:47 +0100
> "Michal Piotrowski" <michal.k.k.piotrowski@gmail.com> wrote:
> 
>> On 26/01/07, Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:
>>> akpm@osdl.org napisał(a):
>>>> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>>>>
>>>>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
>>> security/selinux/hooks.c: In function 'selinux_sysctl':
>>> security/selinux/hooks.c:1440: error: 'ctl_table' has no member named 'de'
>>> make[2]: *** [security/selinux/hooks.o] Error 1
>>> make[1]: *** [security/selinux] Error 2
>>> make: *** [security] Error 2
>>>
>>> Sysctl patches?
>> Thanks Eric, it builds fine.
>>
> 
> It doesn't for me.  What did you change?  Did you receive some unseen-by-me patch
> from Eric?
> 

Subject: sysctl-remove-the-proc_dir_entry-member-for-the-sysctl-tables-hack
From: Andrew Morton <akpm@osdl.org>

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

Upss. It's your patch, thanks.

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

It almost work :)

I'm getting a lot of

BUG: sleeping function called from invalid context at mm/slab.c:3038
in_atomic():0, irqs_disabled():1
no locks held by swapper/1.
irq event stamp: 537144
hardirqs last  enabled at (537143): [<c0167c31>] mod_zone_page_state+0x55/0x67
hardirqs last disabled at (537144): [<c0179569>] cache_alloc_refill+0x361/0x640
softirqs last  enabled at (536600): [<c012a38a>] __do_softirq+0xd9/0xde
softirqs last disabled at (536595): [<c012a3d9>] do_softirq+0x4a/0x7a
 [<c010544a>] show_trace_log_lvl+0x1a/0x2f
 [<c0105b63>] show_trace+0x12/0x14
 [<c0105c25>] dump_stack+0x16/0x18
 [<c011e2c0>] __might_sleep+0xe5/0xeb
 [<c0179c09>] kmem_cache_alloc+0x28/0xe4
 [<c0179601>] cache_alloc_refill+0x3f9/0x640
 [<c0179c79>] kmem_cache_alloc+0x98/0xe4
 [<c011b2a3>] pgd_alloc+0x12/0x14
 [<c0122c07>] mm_init+0xa3/0xf5
 [<c0124229>] mm_alloc+0x2b/0x2e
 [<c0182ac3>] do_execve+0x81/0x210
 [<c01026a0>] sys_execve+0x3f/0x8a
 [<c01043f0>] syscall_call+0x7/0xb
 =======================

http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/mm-dmesg
http://www.stardust.webpages.pl/files/tbf/euridica/mm-snapshot-2007-01-26/mm-config

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

fs/ecryptfs/crypto.c: In function ‘ecryptfs_init_crypt_ctx’:
fs/ecryptfs/crypto.c:831: error: ‘CRYPTO_TFM_MODE_CBC’ undeclared (first use in this function)
fs/ecryptfs/crypto.c:831: error: (Each undeclared identifier is reported only once
fs/ecryptfs/crypto.c:831: error: for each function it appears in.)
make[2]: *** [fs/ecryptfs/crypto.o] Błąd 1
make[1]: *** [fs/ecryptfs] Błąd 2
make: *** [fs] Błąd 2

git-cryptodev.patch removes CRYPTO_TFM_MODE_CBC but it is still defined as ECRYPTFS_DEFAULT_CHAINING_MODE
in fs/ecryptfs/ecryptfs_kernel.h

What should be a new ECRYPTFS_DEFAULT_CHAINING_MODE ?

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Herbert Xu]

On Sat, Jan 27, 2007 at 04:05:19PM +0100, Michal Piotrowski wrote:
> 
> git-cryptodev.patch removes CRYPTO_TFM_MODE_CBC but it is still defined as ECRYPTFS_DEFAULT_CHAINING_MODE
> in fs/ecryptfs/ecryptfs_kernel.h
> 
> What should be a new ECRYPTFS_DEFAULT_CHAINING_MODE ?

It should simply be removed.

Cheers,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
On Sat, Jan 27, 2007 at 09:49:21AM +1100, Herbert Xu wrote:
> 
> That macro has been obsolete for ages.  I wonder why ecryptfs is still
> using it.  Oh well I'll restore it for now.

What I ended up doing is adding the following patch to cryptodev-2.6.
So if you pull again it should be there now.

Cheers,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 7196f50..a86a55c 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -828,9 +828,7 @@ int ecryptfs_init_crypt_ctx(struct ecryptfs_crypt_stat *crypt_stat)
 		mutex_unlock(&crypt_stat->cs_tfm_mutex);
 		goto out;
 	}
-	crypto_blkcipher_set_flags(crypt_stat->tfm,
-				   (ECRYPTFS_DEFAULT_CHAINING_MODE
-				    | CRYPTO_TFM_REQ_WEAK_KEY));
+	crypto_blkcipher_set_flags(crypt_stat->tfm, CRYPTO_TFM_REQ_WEAK_KEY);
 	mutex_unlock(&crypt_stat->cs_tfm_mutex);
 	rc = 0;
 out:
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index afb64bd..0f89710 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -176,7 +176,6 @@ ecryptfs_get_key_payload_data(struct key *key)
 #define ECRYPTFS_FILE_SIZE_BYTES 8
 #define ECRYPTFS_DEFAULT_CIPHER "aes"
 #define ECRYPTFS_DEFAULT_KEY_BYTES 16
-#define ECRYPTFS_DEFAULT_CHAINING_MODE CRYPTO_TFM_MODE_CBC
 #define ECRYPTFS_DEFAULT_HASH "md5"
 #define ECRYPTFS_TAG_3_PACKET_TYPE 0x8C
 #define ECRYPTFS_TAG_11_PACKET_TYPE 0xED

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

drivers/ata/sata_inic162x.c: In function ‘inic_pci_device_resume’:
drivers/ata/sata_inic162x.c:652: warning: ignoring return value of ‘ata_pci_device_do_resume’, declared with attribute warn_unused_result
drivers/ata/sata_inic162x.c: In function ‘inic_init_one’:
drivers/ata/sata_inic162x.c:727: error: ‘SA_SHIRQ’ undeclared (first use in this function)
drivers/ata/sata_inic162x.c:727: error: (Each undeclared identifier is reported only once
drivers/ata/sata_inic162x.c:727: error: for each function it appears in.)
make[2]: *** [drivers/ata/sata_inic162x.o] Błąd 1
make[1]: *** [drivers/ata] Błąd 2
make: *** [drivers] Błąd 2

SA_SHIRQ was removed. IRQF_SHARED should be used instead?

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/drivers/ata/sata_inic162x.c	2007-01-26 16:47:31.000000000 +0100
+++ linux-work/drivers/ata/sata_inic162x.c	2007-01-27 16:53:26.000000000 +0100
@@ -724,7 +724,7 @@ static int inic_init_one(struct pci_dev
 	probe_ent->n_ports		= NR_PORTS;

 	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = SA_SHIRQ;
+	probe_ent->irq_flags = IRQF_SHARED;

 	probe_ent->mmio_base = mmio_base;

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Tejun Heo]

Acked-by: Tejun Heo <htejun@gmail.com>

Please repost with proper subject.

http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt

Thanks.

-- 
tejun

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

Hi Claas,

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

$ quilt patches drivers/char/drm/via_3d_reg.h
patches/updates-to-via-dri.patch

drivers/char/drm/via_verifier.c: In function ‘via_parse_header2’:
drivers/char/drm/via_verifier.c:737: error: ‘HC_REG_TRANS_SPACE’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:737: error: (Each undeclared identifier is reported only once
drivers/char/drm/via_verifier.c:737: error: for each function it appears in.)
drivers/char/drm/via_verifier.c:754: error: ‘VIA_VIDEOMASK’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:754: error: ‘VIA_VIDEO_HEADER5’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:755: error: ‘VIA_VIDEO_HEADER6’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c: In function ‘via_check_vheader5’:
drivers/char/drm/via_verifier.c:866: error: ‘VIA_VIDEOMASK’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c: In function ‘via_parse_vheader5’:
drivers/char/drm/via_verifier.c:895: error: ‘VIA_VIDEOMASK’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c: In function ‘via_verify_command_stream’:
drivers/char/drm/via_verifier.c:1013: error: ‘VIA_VIDEOMASK’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:1013: error: ‘VIA_VIDEO_HEADER5’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:1016: error: ‘VIA_VIDEO_HEADER6’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c: In function ‘via_parse_command_stream’:
drivers/char/drm/via_verifier.c:1074: error: ‘VIA_VIDEOMASK’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:1074: error: ‘VIA_VIDEO_HEADER5’ undeclared (first use in this function)
drivers/char/drm/via_verifier.c:1076: error: ‘VIA_VIDEO_HEADER6’ undeclared (first use in this function)
make[3]: *** [drivers/char/drm/via_verifier.o] Błąd 1
make[2]: *** [drivers/char/drm] Błąd 2
make[1]: *** [drivers/char] Błąd 2
make: *** [drivers] Błąd 2

Please fix this driver.

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

akpm@osdl.org napisał(a):
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> 
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 

git-scsi-misc.patch typo fix.

drivers/scsi/NCR_D700.c: In function ‘NCR_D700_probe_one’:
drivers/scsi/NCR_D700.c:203: error: ‘struct NCR_700_Host_Parameters’ has no member named ‘busrt_length’
make[2]: *** [drivers/scsi/NCR_D700.o] Błąd 1
make[1]: *** [drivers/scsi] Błąd 2
make: *** [drivers] Błąd 2

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

--- linux-work-clean/drivers/scsi/NCR_D700.c	2007-01-26 16:47:36.000000000 +0100
+++ linux-work/drivers/scsi/NCR_D700.c	2007-01-27 18:13:42.000000000 +0100
@@ -200,7 +200,7 @@ NCR_D700_probe_one(struct NCR_D700_priva
 	hostdata->base = ioport_map(region, 64);
 	hostdata->differential = (((1<<siop) & differential) != 0);
 	hostdata->clock = NCR_D700_CLOCK_MHZ;
-	hostdata->busrt_length = 8;
+	hostdata->burst_length = 8;

 	/* and register the siop */
 	host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Tilman Schmidt]

[-- Attachment #1: Type: text/plain, Size: 1087 bytes --]

Am 27.01.2007 17:37 schrieb Michal Piotrowski:
> On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
>> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>>
>>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
>>
> 
> It's probably not mm snapshot related. This driver is just broken.

It probably *is* mm snapshot related. This driver compiles and works
just fine in 2.6.19.2, 2.6.20-rc6 and 2.6.20-rc4-mm1.

> drivers/isdn/gigaset/bas-gigaset.c: In function 'dump_urb':
> drivers/isdn/gigaset/bas-gigaset.c:258: error: 'struct urb' has no
> member named 'bandwidth'

In current stable and mm releases, 'struct urb' *does* have a member
named 'bandwidth'. If some mm patch removes that member then it is
the responsibility of that patch to adapt all users of that structure
accordingly.

HTH
Tilman

-- 
Tilman Schmidt                          E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Andrew Morton]

On Sat, 27 Jan 2007 22:29:40 +0100
Tilman Schmidt <tilman@imap.cc> wrote:

> Am 27.01.2007 17:37 schrieb Michal Piotrowski:
> > On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> >> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> >>
> >>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> >>
> > 
> > It's probably not mm snapshot related. This driver is just broken.
> 
> It probably *is* mm snapshot related. This driver compiles and works
> just fine in 2.6.19.2, 2.6.20-rc6 and 2.6.20-rc4-mm1.
> 
> > drivers/isdn/gigaset/bas-gigaset.c: In function 'dump_urb':
> > drivers/isdn/gigaset/bas-gigaset.c:258: error: 'struct urb' has no
> > member named 'bandwidth'
> 
> In current stable and mm releases, 'struct urb' *does* have a member
> named 'bandwidth'. If some mm patch removes that member then it is
> the responsibility of that patch to adapt all users of that structure
> accordingly.
> 

yup, there's a patch in Greg's USB tree which removes the bandwidth field. 
Mostly.  I fixed it up.

I have everything compiling now, mostly.  The number of fixes which were
needed was just extraordinary.  I'm thinking about making changes...

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 27/01/07, Andrew Morton <akpm@osdl.org> wrote:
> I have everything compiling now, mostly.  The number of fixes which were
> needed was just extraordinary.  I'm thinking about making changes...

I'm so much looking forward to it.

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Tilman Schmidt]

[-- Attachment #1: Type: text/plain, Size: 538 bytes --]

>>> On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
>>>> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>>>>
>>>>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

Btw, I never received that original message, nor do I find it in
the LKML archive on lkml.org.

-- 
Tilman Schmidt                          E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 28/01/07, Tilman Schmidt <tilman@imap.cc> wrote:
> >>> On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> >>>> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> >>>>
> >>>>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
>
> Btw, I never received that original message, nor do I find it in
> the LKML archive on lkml.org.

There is a mm-commits mailing list.

http://vger.kernel.org/vger-lists.html#mm-commits

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 3021 bytes --]

On Sat, 27 Jan 2007 13:41:16 PST, Andrew Morton said:
> > > On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> > >> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> > >>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

> I have everything compiling now, mostly.  The number of fixes which were
> needed was just extraordinary.  I'm thinking about making changes...

Another one - I can't get this to build for x86_64. (Skipping over all the
already-mentioned build errors that others have already reported...)

First, I had to do some ad-crock hacking of Kconfig files to get kernel/timer.c
to build right, because otherwise it didn't include any of the defines in
include/kernel/clockchips.c so CLOCK_EVT_NOTIFY_RESUME wasn't defined (either
that, or a #ifdef for GENERIC_TIME had its #endif land in the wrong place?)

--- linux-2.6.20-rc6-mm1/arch/x86_64/Kconfig.dist	2007-01-26 14:30:53.000000000 -0500
+++ linux-2.6.20-rc6-mm1/arch/x86_64/Kconfig	2007-01-27 07:14:22.000000000 -0500
@@ -32,6 +32,14 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y

+config GENERIC_CLOCKEVENTS
+	bool
+	default y
+
+config GENERIC_CLOCKEVENTS_BROADCAST
+	bool
+	default y
+
 config ZONE_DMA32
 	bool
 	default y
@@ -126,6 +134,8 @@ source "init/Kconfig"

 menu "Processor type and features"

+source "kernel/time/Kconfig"
+
 choice
 	prompt "Subarchitecture Type"
 	default X86_PC

And even after that, I hit this:

  CC      kernel/time/clocksource.o
In file included from kernel/time/clocksource.c:31:
include/linux/tick.h:45: error: field sched_timer has incomplete type
make: *** [kernel/time/clocksource.o: Error 1

--- linux-2.6.20-rc6-mm1/kernel/time/clocksource.c.dist	2007-01-27 19:36:31.000000000 -0500
+++ linux-2.6.20-rc6-mm1/kernel/time/clocksource.c	2007-01-27 19:36:03.000000000 -0500
@@ -28,6 +28,7 @@
 #include <linux/sysdev.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/hrtimer.h>
 #include <linux/tick.h>

 /* XXX - Would like a better way for initializing curr_clocksource */

Then we live long enough to hit this:

  CC      block/elevator.o
block/elevator.c: In function elv_insert:
block/elevator.c:611: error: unplug_it undeclared (first use in this function)

--- linux-2.6.20-rc6-mm1/block/elevator.c.dist	2007-01-26 14:30:36.000000000 -0500
+++ linux-2.6.20-rc6-mm1/block/elevator.c	2007-01-27 19:57:02.000000000 -0500
@@ -604,12 +604,6 @@ void elv_insert(request_queue_t *q, stru
 		 */
 		rq->cmd_flags |= REQ_SOFTBARRIER;

-		/*
-		 * Most requeues happen because of a busy condition,
-		 * don't force unplug of the queue for that case.
-		 */
-		unplug_it = 0;
-
 		if (q->ordseq == 0) {
 			list_add(&rq->queuelist, &q->queue_head);
 			break;


(How did *that* one manage to compile for anybody??!?)

After all that, I finally got a clean compile....  Maybe later I'll get brave
and actually try to boot it. :)



[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Michal Piotrowski]

On 28/01/07, Valdis.Kletnieks@vt.edu <Valdis.Kletnieks@vt.edu> wrote:
> --- linux-2.6.20-rc6-mm1/block/elevator.c.dist  2007-01-26 14:30:36.000000000 -0500
> +++ linux-2.6.20-rc6-mm1/block/elevator.c       2007-01-27 19:57:02.000000000 -0500
> @@ -604,12 +604,6 @@ void elv_insert(request_queue_t *q, stru
>                  */
>                 rq->cmd_flags | REQ_SOFTBARRIER;
>
> -               /*
> -                * Most requeues happen because of a busy condition,
> -                * don't force unplug of the queue for that case.
> -                */
> -               unplug_it  0;
> -
>                 if (q->ordseq  0) {
>                         list_add(&rq->queuelist, &q->queue_head);
>                         break;
>
>
> (How did *that* one manage to compile for anybody??!?)

I have fixed this in my local tree, but I didn't send a patch because
Andrew has sent a git-block-borkage.patch three minutes earlier.

> After all that, I finally got a clean compile....  Maybe later I'll get brave
> and actually try to boot it. :)

Good luck :)

Regards,
Michal

-- 
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 1548 bytes --]

On Sat, 27 Jan 2007 13:41:16 PST, Andrew Morton said:
> > > >> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> > > >>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 
> > I have everything compiling now, mostly.  The number of fixes which were
> > needed was just extraordinary.  I'm thinking about making changes...

Aliens ate my brain, part 1:

I tried building an out-of-tree ipfilters (ipt_osf) that worked fine under
2.6.20-rc4-mm1.  After much scratching my head and adding debugging info,
I discovered that this code was failing:

        p = create_proc_entry("sys/net/ipv4/osf", S_IFREG | 0644, NULL);
        if (!p) {
                ipt_unregister_match(&osf_match);
                return -ENXIO;
        }

After much *more* head-scratching, and adding of printk's, I tracked it down
into fs/proc/generic.c, in xlate_proc_name:

                len = next - cp;
                for (de = de->subdir; de ; de = de->next) {
                        if (proc_match(len, cp, de))
                                break;
                }
                if (!de) {
                        rtn = -ENOENT;
                        goto out;

It appears that syssctl-reimplement-the-sysctl-proc-support.patch doesn't
bother setting the de->subdir, so xlate_proc_name isn't able to find sys/net.

What's the intended semantics of create_proc_entry and xlate_proc_name in
this new regime of no subdir pointers? Or am I just (yet again) one of the
first to trip over a bug?


[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Eric W. Biederman]

Valdis.Kletnieks@vt.edu writes:

> On Sat, 27 Jan 2007 13:41:16 PST, Andrew Morton said:
>> > > >> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>> > > >>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
>> 
>> > I have everything compiling now, mostly.  The number of fixes which were
>> > needed was just extraordinary.  I'm thinking about making changes...
>
> Aliens ate my brain, part 1:
>
> I tried building an out-of-tree ipfilters (ipt_osf) that worked fine under
> 2.6.20-rc4-mm1.  After much scratching my head and adding debugging info,
> I discovered that this code was failing:
>
>         p = create_proc_entry("sys/net/ipv4/osf", S_IFREG | 0644, NULL);
>         if (!p) {
>                 ipt_unregister_match(&osf_match);
>                 return -ENXIO;
>         }
>
> After much *more* head-scratching, and adding of printk's, I tracked it down
> into fs/proc/generic.c, in xlate_proc_name:
>
>                 len = next - cp;
>                 for (de = de->subdir; de ; de = de->next) {
>                         if (proc_match(len, cp, de))
>                                 break;
>                 }
>                 if (!de) {
>                         rtn = -ENOENT;
>                         goto out;
>
> It appears that syssctl-reimplement-the-sysctl-proc-support.patch doesn't
> bother setting the de->subdir, so xlate_proc_name isn't able to find sys/net.

Does it find sys?  If so perhaps I should do something even more significant.
I guess if I get many complaints about this I will figure out how to print
out an appropriate error message.

> What's the intended semantics of create_proc_entry and xlate_proc_name in
> this new regime of no subdir pointers? Or am I just (yet again) one of the
> first to trip over a bug?

It is supposed to fail in this instance.  If you want something under /proc/sys
you are supposed to use register_sysctl like everyone else.  If it's not a
sysctl it should not show up under /proc/sys.

I think I fixed the one in tree instance of this behavior.

I'm glad to see my cleanup uncovering more bugs, I'm sorry you were the one
who had to find it.  I will you well fixing your out of tree ipfilter module.

Eric

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]

On Sun, 28 Jan 2007 23:08:17 MST, Eric W. Biederman said:
> Valdis.Kletnieks@vt.edu writes:

> Does it find sys?  If so perhaps I should do something even more significant.
> I guess if I get many complaints about this I will figure out how to print
> out an appropriate error message.

It found sys, and then the second iteration in in xlate_proc_name it failed
to find net because the de->subdir for sys/net wasn't set.

> > What's the intended semantics of create_proc_entry and xlate_proc_name in
> > this new regime of no subdir pointers? Or am I just (yet again) one of the
> > first to trip over a bug?
> 
> It is supposed to fail in this instance.  If you want something under /proc/sys
> you are supposed to use register_sysctl like everyone else.  If it's not a
> sysctl it should not show up under /proc/sys.

Wasn't my code originally - I think the original author thought that since
all the *other* config stuff for ipv4 was down under /proc/sys/net/ipv4, this
one should be as well because that's where sysadmins would look for it, and
wasn't thinking so much about whether it was a sysctl or not.

> I'm glad to see my cleanup uncovering more bugs, I'm sorry you were the one
> who had to find it.  I will you well fixing your out of tree ipfilter module.

It's easy enough to move the entry under /proc/net or someplace instead.

What's the current advice on what kernel interface to use for this scenario:

In userspace, we do something like this:

(while read foo; do echo $foo > /proc/my_file; done) < /etc/bunch_of_lines

and we want to catch, parse, and save each line as it enters the kernel, and
we end up with several dozen entries saved.

If we do a 'cat /proc/my_file', we iterate across the list of saved lines
and dump them all out.



[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Eric W. Biederman]

Valdis.Kletnieks@vt.edu writes:

> On Sun, 28 Jan 2007 23:08:17 MST, Eric W. Biederman said:
>> Valdis.Kletnieks@vt.edu writes:
>
>> Does it find sys?  If so perhaps I should do something even more significant.
>> I guess if I get many complaints about this I will figure out how to print
>> out an appropriate error message.
>
> It found sys, and then the second iteration in in xlate_proc_name it failed
> to find net because the de->subdir for sys/net wasn't set.

Thanks. 

>> > What's the intended semantics of create_proc_entry and xlate_proc_name in
>> > this new regime of no subdir pointers? Or am I just (yet again) one of the
>> > first to trip over a bug?
>> 
>> It is supposed to fail in this instance.  If you want something under
> /proc/sys
>> you are supposed to use register_sysctl like everyone else.  If it's not a
>> sysctl it should not show up under /proc/sys.
>
> Wasn't my code originally - I think the original author thought that since
> all the *other* config stuff for ipv4 was down under /proc/sys/net/ipv4, this
> one should be as well because that's where sysadmins would look for it, and
> wasn't thinking so much about whether it was a sysctl or not.
>
>> I'm glad to see my cleanup uncovering more bugs, I'm sorry you were the one
>> who had to find it.  I will you well fixing your out of tree ipfilter module.
>
> It's easy enough to move the entry under /proc/net or someplace instead.
>
> What's the current advice on what kernel interface to use for this scenario:
>
> In userspace, we do something like this:
>
> (while read foo; do echo $foo > /proc/my_file; done) < /etc/bunch_of_lines
>
> and we want to catch, parse, and save each line as it enters the kernel, and
> we end up with several dozen entries saved.
>
> If we do a 'cat /proc/my_file', we iterate across the list of saved lines
> and dump them all out.

Well it is a non-fixed number of entries so it does not sound appropriate for
a sysctl.  sysctl tends to work well for simple settings, not complicated things.

/proc/net would be the easy place, although I think traditionally /proc/net
is just reporting.

Given the context I will suggest setsockopt as most of iptables is configured
using that.

Generally going beyond one value per file is discouraged, in any context.

So I guess the general advice is don't have that scenario :)

In your situation I would find something in the kernel that does something
similar and see how it provides for a user interface.  If there is a way
that it is done for similar modules do that. 

If there is no precedent something under sysfs likely makes the most sense.
/proc is really supposed for things related to processes.

I usually spend my time keeping the old things going and useful in new and
interesting situations instead of figuring out the interface recommendation
of the week.

I would be really surprised if your configuration requirements were unique
and there weren't several somethings in the kernel that solved the
same problem in a different way.

Eric

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 47234 bytes --]

On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz

Aliens ate my brain, part 2:

My IPv6 configuration evaporated, totally, out of my .config.  I tracked it
down to wierdness with net/Kconfig:

if INET   
          
source "net/ipv4/Kconfig"
source "net/netlabel/Kconfig"
          
endif # if INET
          
source "net/ipv6/Kconfig"

(Yes, the ipv6 is now *outside* the if/endif - that's what I had to do to make
it work).  If that last 'source' was *inside* that if/endif, it became
invisible unless I set INET to *N*, at which point ipv4 and netlabel would
disappear, and ipv6 would become visible.  If I set INET to Y, then ipv4 and
netlabel would come back, and ipv6 would go poof again. This affected both
'make menuconfig' and 'make [silent]oldconfig'.

.config follows.  I have *no* idea what caused it.

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc6-mm1
# Sun Jan 28 02:43:46 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_USER_NS=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_DEBUG_READAHEAD=y
CONFIG_NR_CPUS=8
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_NETDEBUG=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_NETLABEL=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_IPISFORIF=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_U32=m
CONFIG_IP_NF_MATCH_OSF=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_IEEE80211_RADIOTAP=y
CONFIG_WIRELESS_EXT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=10240
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_BLINK is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FW is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
CONFIG_NET_WIRELESS=y
CONFIG_IPW3945=m
# CONFIG_IPW3945_DEBUG is not set
CONFIG_IPW3945_MONITOR=y
# CONFIG_IPW3945_PROMISCUOUS is not set

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_DONT_TEST_BUG_TXEN is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y

#
# TPM devices
#
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set

#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# SoC audio support
#
# CONFIG_SND_SOC is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y

#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_K8 is not set
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Auxiliary Display support
#

#
# Virtualization
#
# CONFIG_KVM is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_UNION_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Distributed Lock Manager
#

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_INTEGRITY is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FS_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y


[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Randy Dunlap]

On Sun, 28 Jan 2007 21:58:26 -0500 Valdis.Kletnieks@vt.edu wrote:

> On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> > The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 
> Aliens ate my brain, part 2:
> 
> My IPv6 configuration evaporated, totally, out of my .config.  I tracked it
> down to wierdness with net/Kconfig:
> 
> if INET   
>           
> source "net/ipv4/Kconfig"
> source "net/netlabel/Kconfig"
>           
> endif # if INET
>           
> source "net/ipv6/Kconfig"
> 
> (Yes, the ipv6 is now *outside* the if/endif - that's what I had to do to make
> it work).  If that last 'source' was *inside* that if/endif, it became
> invisible unless I set INET to *N*, at which point ipv4 and netlabel would
> disappear, and ipv6 would become visible.  If I set INET to Y, then ipv4 and
> netlabel would come back, and ipv6 would go poof again. This affected both
> 'make menuconfig' and 'make [silent]oldconfig'.
> 
> .config follows.  I have *no* idea what caused it.

Possibly my (bad) gfs2/dlm patch...

Please try applying Adrian Bunk's patch to see if that fixes the
IPV6 disappearing trick. (below)

---
On Sun, Jan 28, 2007 at 11:08:18AM +0100, Jiri Slaby wrote:
> Andrew Morton napsal(a):
> >Temporarily at
> >
> >	http://userweb.kernel.org/~akpm/2.6.20-rc6-mm1/
> 
> Unable to select IPV6. Menuconfig doesn't offer it when INET is selected. 
> When it's not it appears in the menu, but after state change it gets away. 
> The same behaviour in xconfig, gconfig.
> 
> $ mkdir ../a/tst
> $ make O=../a/tst menuconfig
>   HOSTCC  scripts/basic/fixdep
> [...]
>   HOSTLD  scripts/kconfig/mconf
> scripts/kconfig/mconf arch/i386/Kconfig
> Warning! Found recursive dependency: INET GFS2_FS_LOCKING_DLM SYSFS 
> OCFS2_FS INET
> 
> Maybe this is the problem?

Yes, patch below.

> regards,

cu
Adrian


<--  snip  -->


This patch fixes a circular dependency by letting GFS2_FS_LOCKING_DLM 
and DLM depend on instead of select SYSFS.

Since SYSFS depends on EMBEDDED this change shouldn't cause any problems 
for users.

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 fs/dlm/Kconfig  |    3 +--
 fs/gfs2/Kconfig |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

--- linux-2.6.20-rc6-mm1/fs/gfs2/Kconfig.old	2007-01-28 16:44:17.000000000 +0100
+++ linux-2.6.20-rc6-mm1/fs/gfs2/Kconfig	2007-01-28 16:44:59.000000000 +0100
@@ -34,11 +34,10 @@
 
 config GFS2_FS_LOCKING_DLM
 	tristate "GFS2 DLM locking module"
-	depends on GFS2_FS && NET && INET && (IPV6 || IPV6=n)
+	depends on GFS2_FS && SYSFS && NET && INET && (IPV6 || IPV6=n)
 	select IP_SCTP if DLM_SCTP
 	select CONFIGFS_FS
 	select DLM
-	select SYSFS
 	help
 	Multiple node locking module for GFS2
 
--- linux-2.6.20-rc6-mm1/fs/dlm/Kconfig.old	2007-01-28 16:56:57.000000000 +0100
+++ linux-2.6.20-rc6-mm1/fs/dlm/Kconfig	2007-01-28 16:57:16.000000000 +0100
@@ -3,9 +3,8 @@
 
 config DLM
 	tristate "Distributed Lock Manager (DLM)"
-	depends on IPV6 || IPV6=n
+	depends on SYSFS && (IPV6 || IPV6=n)
 	select CONFIGFS_FS
-	select SYSFS
 	select IP_SCTP if DLM_SCTP
 	help
 	A general purpose distributed lock manager for kernel or userspace

-

Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 833 bytes --]

On Sun, 28 Jan 2007 21:58:26 EST, Valdis.Kletnieks@vt.edu said:
> --==_Exmh_1170039506_3335P
> Content-Type: text/plain; charset=us-ascii
> 
> On 26/01/07, akpm@osdl.org <akpm@osdl.org> wrote:
> > The mm snapshot broken-out-2007-01-26-00-36.tar.gz has been uploaded to
> >    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-01-26-00-36.tar.gz
> 
> Aliens ate my brain, part 2:
> 
> My IPv6 configuration evaporated, totally, out of my .config.  I tracked it
> down to wierdness with net/Kconfig:

Trying again with the official -rc6-mm1 tarball...

The aliens regurgitated my brain - after I did a 'make oldconfig' against my
-rc4-mm1 config, I did a 'make menuconfig' and all the IPv6 stuff showed up
as 'NEW'.  Not sure why it didn't carry over the the -rc4-mm1 values, but
at least I was able to re-set them.

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]