From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964944AbXBOICj (ORCPT ); Thu, 15 Feb 2007 03:02:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964945AbXBOICj (ORCPT ); Thu, 15 Feb 2007 03:02:39 -0500 Received: from public.id2-vpn.continvity.gns.novell.com ([195.33.99.129]:51677 "EHLO public.id2-vpn.continvity.gns.novell.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964944AbXBOICi (ORCPT ); Thu, 15 Feb 2007 03:02:38 -0500 Message-Id: <45D4219D.76E4.0078.0@novell.com> X-Mailer: Novell GroupWise Internet Agent 7.0.1 Date: Thu, 15 Feb 2007 08:02:21 +0000 From: "Jan Beulich" To: Cc: Subject: [PATCH] adjust legacy IDE resource setting (v2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The change to force legacy mode IDE channels' resources to fixed non-zero values confuses (at least some versions of) X, because the values reported by the kernel and those readable from PCI config space aren't consistent anymore. Therefore, this patch arranges for the respective BARs to also get updated if possible. (The only change to the original version is an added comment.) Signed-off-by: Jan Beulich --- linux-2.6.20/drivers/pci/probe.c 2007-02-04 19:44:54.000000000 +0100 +++ 2.6.20-pci-ide-legacy/drivers/pci/probe.c 2007-02-15 08:54:58.000000000 +0100 @@ -639,7 +639,34 @@ static void pci_read_irq(struct pci_dev dev->irq = irq; } -#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED) +static void change_legacy_io_resource(struct pci_dev * dev, unsigned index, + unsigned start, unsigned end) +{ + unsigned base = start & PCI_BASE_ADDRESS_IO_MASK; + unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1; + + /* + * Some X versions get confused when the BARs reported through + * /sys or /proc differ from those seen in config space, thus + * try to update the config space values, too. + */ + if (!(pci_resource_flags(dev, index) & IORESOURCE_IO)) + printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n", + pci_name(dev), index); + else if (pci_resource_len(dev, index) != len) + printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n", + pci_name(dev), index, (unsigned)pci_resource_len(dev, index)); + else { + printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n", + pci_name(dev), index, + (unsigned)pci_resource_start(dev, index), base); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base); + } + pci_resource_start(dev, index) = start; + pci_resource_end(dev, index) = end; + pci_resource_flags(dev, index) = + IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO; +} /** * pci_setup_device - fill in class and map information of a device @@ -692,20 +719,12 @@ static int pci_setup_device(struct pci_d u8 progif; pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 1) == 0) { - dev->resource[0].start = 0x1F0; - dev->resource[0].end = 0x1F7; - dev->resource[0].flags = LEGACY_IO_RESOURCE; - dev->resource[1].start = 0x3F6; - dev->resource[1].end = 0x3F6; - dev->resource[1].flags = LEGACY_IO_RESOURCE; + change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7); + change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6); } if ((progif & 4) == 0) { - dev->resource[2].start = 0x170; - dev->resource[2].end = 0x177; - dev->resource[2].flags = LEGACY_IO_RESOURCE; - dev->resource[3].start = 0x376; - dev->resource[3].end = 0x376; - dev->resource[3].flags = LEGACY_IO_RESOURCE; + change_legacy_io_resource(dev, 2, 0x170, 0x177); + change_legacy_io_resource(dev, 3, 0x376, 0x376); } } break;