lanana: Add major/minor entries for PPC QE UART devices

[Timur Tabi <timur@freescale.com>]

Hi,

(Email to device@lanana.org bounces, so I'm sending this to lkml instead.)

I'm working on a UART device driver for the Freescale PowerPC QUICCEngine, which
is a replacement for the CPM.  Since the QE is basically "CPM v3", and you can't
have a CPM and a QE on the same board, I figure that they can share the same
minor numbers.

I've attached a patch that adds these entries to major number 204.  Please not
that there's a small typo for /dev/ttyCPM5, and I've fixed that in the patch as
well.

Please let me know if my proposal/patch is acceptable, and if not, what changes
you want me to make.  Thanks.

patch:

Fixed a typo with /dev/ttyCPM5.  Added entries for /dev/ttyQE0-3.  The QE
is a replacement for the CPM, so they can share the same minor numbers.

--- devices-2.6+.txt	2007-02-22 13:37:18.000000000 -0600
+++ devices-2.6+.new	2007-02-22 13:42:50.000000000 -0600
@@ -2770,7 +2770,10 @@
  		 45 = /dev/ttyMM1		Marvell MPSC - port 1
  		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
  		    ...
-		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
+		 49 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
+		 46 = /dev/ttyQE0		PPC QE (UCC) - port 0
+		    ...
+		 49 = /dev/ttyQE3		PPC QE (UCC) - port 3
  		 50 = /dev/ttyIOC0		Altix serial card
  		    ...
  		 81 = /dev/ttyIOC31		Altix serial card


-- 
Timur Tabi
Linux Kernel Developer @ Freescale