From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933592AbXCWTfr (ORCPT ); Fri, 23 Mar 2007 15:35:47 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933664AbXCWTfr (ORCPT ); Fri, 23 Mar 2007 15:35:47 -0400 Received: from mail.gmx.net ([213.165.64.20]:56840 "HELO mail.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S933592AbXCWTfq (ORCPT ); Fri, 23 Mar 2007 15:35:46 -0400 X-Authenticated: #17142692 X-Provags-ID: V01U2FsdGVkX18jzDAZLw8jvEsCzLHtlQWdqt42VkWaNetGS/qxu2 BygEqwc7zZkMua Message-ID: <46042C10.3080407@gmx.de> Date: Fri, 23 Mar 2007 20:35:44 +0100 From: thomas schorpp Reply-To: t.schorpp@gmx.de User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.10) Gecko/20070217 Iceape/1.0.8 (Debian-1.0.8-3) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: [BUG][x86_64]pci layer may report wrong iomem resources data to drivers Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Y-GMX-Trusted: 0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org lo, aic7xxx driver mmio / dma on x86_64 linux broken here. i need some comments and further investigation advice on this: (resend, mozilla misconfig ) > thomas schorpp wrote: >> James Bottomley wrote: >>> On Fri, 2007-03-23 at 17:28 +0100, thomas schorpp wrote: >>>>> i agree for this to be a 32bit dma busmaster chip, >>>>> since pci_resource_flags and lspci say 64bit mem resource type >>>>> >>>>> aic7xxx: pci_resource_start fffff000 *maddr 20000 mem64 4 >>>>> >> >> static int >> ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc, >> u_long *bus_addr, >> uint8_t __iomem **maddr) >> { >> // u_long start; >> u_long len; >> int error; >> uint64_t start; >> ... >> printk(KERN_WARNING "aic7xxx: pci_resource_start 0x%llx mem64 0x%lx\n", start, pci_resource_flags(ahc->dev_softc, 1) & PCI_BASE_ADDRESS_MEM_TYPE_64 ); //schorpp >> return (error); >> >> aic7xxx: pci_resource_start 0xffffff000 mem64 0x4 >> -----------------------------------------------^ >> >> just to doublecheck the situation, posted lspci already. >> >> will check next, if >> len = pci_resource_len(ahc->dev_softc, 1); >> if (start != 0) { >> *bus_addr = start; >> // if (request_mem_region(start, 0x1000, "aic7xxx") == 0) >> if (request_mem_region(start, len, "aic7xxx") == 0) >> >> succeeds. > > no. so the pci layer reports wrong start: > > start = pci_resource_start(ahc->dev_softc, 1); > len = pci_resource_len(ahc->dev_softc, 1); > if (start != 0) { > *bus_addr = start; > // if (request_mem_region(start, 0x1000, "aic7xxx") == 0) > if (request_mem_region(start, len, "aic7xxx") == 0) > error = ENOMEM; > printk(KERN_WARNING "aic7xxx: req_mem_region 0x%x memlen 0x%lx \n", error, len ); //schorpp > > tom1:~# dmesg |grep aic > aic7xxx: DMA_32BIT_MASK > aic7xxx: req_mem_region 0x0 memlen 0x1000 > aic7xxx: pci_resource_start 0xffffff000 *maddr 0x20000 mem64 0x4 > aic7xxx: PCI Device 0:6:0 failed memory mapped test. Using PIO. > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > > >> >>>>> we've a bug in the x86_64 linux pci config, BIOS is ok, the hardware worked fine in a winxp_x64 test setup a few months ago. >>>>> >>>>> will ask LKML. >>>>> >>>>> y >>>>> tom >>>> sorry, wrong according to http://download.adaptec.com/pdfs/aic7892.pdf. >>>> >>>> "66 MHz, 64-bit, PCI interface that >>>> supports zero wait-state memory; >>>> also operates on 33 MHz, 32-bit >>>> PCI busses" >>>> >>>> this chip is capable of 64bit addressing, as pci_resource_nnnn (checking this) on x86_64 platform and lspci on x86_64 *and* AMDK7 configured kernels reports, even on PCI/32, right? >>>> or is it impossible to do multiplexed 64bit mem addressing on PCI/32? >>> >>> It can only do 37 bit addressing ... only the aic79xx can do the full 64 >>> bits, so I suspect it should never get a 64 bit BAR, since it wouldn't >>> be able to decode the full 32 bits. I can fix the mmio check not to >>> hang, but the card won't actually work mmio until whatever's assigning >>> the BAR above 32 bits is fixed (that could either be a kernel PCI bug or >>> a BIOS bug). >>> >> >> ok, i trust in that. adaptor bios and mainboard bios *are* out, winxp_x64 driver handled all. >> so agree on kernel pci hal issue. >> but what for const uint64_t mask_39bit = 0x7FFFFFFFFFULL; >> then? >> >>>> >>>> can adaptec.inc pls comment? since the aha19160 card is still in production state, i assume they want to have a linux x86_64 dma capable driver. so far it is not, or can other users having this card pls confirm my pci system broken? >>> >>> James >>> >>> >> >> y >> tom >> >> - >> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > - > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html