From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933766AbXDASEF (ORCPT ); Sun, 1 Apr 2007 14:04:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S933762AbXDASEF (ORCPT ); Sun, 1 Apr 2007 14:04:05 -0400 Received: from smtpout05-04.prod.mesa1.secureserver.net ([64.202.165.221]:39557 "HELO smtpout05.prod.mesa1.secureserver.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with SMTP id S933766AbXDASEA (ORCPT ); Sun, 1 Apr 2007 14:04:00 -0400 Message-ID: <460FF40D.2060109@seclark.us> Date: Sun, 01 Apr 2007 14:03:57 -0400 From: Stephen Clark Reply-To: Stephen.Clark@seclark.us User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.16-22smp i686; en-US; m18) Gecko/20010110 Netscape6/6.5 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Stephen.Clark@seclark.us CC: Andrew Morton , linux-kernel , Adrian Bunk , Francois Romieu , Jeff Garzik , Tejun Heo , Alan Cox Subject: Re: 2.6.21-rc5 from fc7-rc2 problems References: <460EC109.5070300@seclark.us> <20070331134610.64a9c410.akpm@linux-foundation.org> <460EFC76.4060808@seclark.us> In-Reply-To: <460EFC76.4060808@seclark.us> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Stephen Clark wrote: >Andrew Morton wrote: > > > >>On Sat, 31 Mar 2007 16:14:01 -0400 Stephen Clark wrote: >> >> >> >> >> >>>Hello, >>> >>>I have just tried booting the fc7-rc2 live cd on 2 of my laptops and it >>>failed on both. >>> >>>Laptop 1 is an asus vbi s96f that get a panic that says exception in >>>interrupt routine >>>for my rtl8139. >>> >>>This device works fine in 2.6.20.2 >>> >>> >>> >>> >>That's regression #1. Are you able to take a photograph of the screen >>when it has crashed? Setting the display to 50 rows would make that more >>useful. (serial console would be better, but I assume that thing has >>no serial port). >> >> >> >> >> >>>The other laptop is a hp n5430 it fail in the ali-pata driver not being >>>able to read the cdrom, timeing out >>>and dropping into a bash shell telling me to tell it where the root >>>filesystem is. >>> >>> >>> >>> >>That's #2, I guess. >> >> >> >> >> >>>Also it sets my hard >>>drive to udma/33 when it run find at udma/66 under 2.6.20.1. >>> >>> >>> >>> >>#3. Hopefully it's related to #2. >> >>Please send the full dmesg output for 2.6.20.1 on the n5430. >> >> >> >> >> >>>It would >>>really be nice if the people makeing >>>all these changes would at least keep things compatible with what they >>>were before. These are regressions >>>guys! >>> >>> >>> >>> >>We try ;) >> >> >> >> >> >>>This hp n5430 system works fine with 2.6.20.1. >>> >>> >>> >>> >>Thanks, it helps. >> >> >> >> >> >> >I'll see if I can get a serial port console setup on each laptop, >failing that I'll take a >photo. > >Thanks, >Steve > > > First this actually from fc7-rc3 but it is still 2.6.21-rc5 Here is the console output from booting the cd 2.6.21-rc5 on my HP N5430 laptop followed by booting fc6 2.6.20.1-2933 Note: From fedora test 3 release anouncement: System Level Changes ======== * Fedora 7 Test 3 features a 2.6.21rc5 based kernel. Current release information is being tracked on the kernel release notes source page. even though the kernel message below says it is 2.6.20???? maybe fedora people can speak to this. Linux version 2.6.20-1.3023.fc7 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Sun Mar 25 22:12:02 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f000 size: 0000000000061000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001fff0000 size: 000000000000f000 end: 000000001ffff000 type: 3 copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 131056) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131056 HighMem 131056 -> 131056 early_node_map[1] active PFN ranges 0: 0 -> 131056 On node 0 totalpages: 131056 DMA zone: 52 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4044 pages, LIFO batch:0 Normal zone: 1611 pages used for memmap Normal zone: 125349 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.2 present. Using APIC driver default ACPI: RSDP 000F7C20, 0014 (r0 PTLTD ) ACPI: RSDT 1FFFCC46, 002C (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 1FFFEF64, 0074 (r1 ALI M1533 6040000 PTL F4240) ACPI: DSDT 1FFFCC72, 22F2 (r1 COMPAL 736 6040000 MSFT 100000D) ACPI: FACS 1FFFFFC0, 0040 ACPI: BOOT 1FFFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) Built 1 zonelists. Total pages: 129393 Kernel command line: initrd=initrd.img ro quiet root=CDLABEL=Fedora-7-Test3-KDE-Live rootfstype=iso9660 livecd nousb console=ttyS0,38400 BOOT_IMAGE=vmlinuz Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0168e000) Enabling fast FPU save and restore... done. Initializing CPU#0 CPU 0 irqstacks, hard=c079e000 soft=c077e000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 850.084 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1096 kB per task-struct memory footprint: 1200 bytes Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 505644k/524224k available (2145k kernel code, 17840k reserved, 1141k data, 248k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc073b000 - 0xc0779000 ( 248 kB) .data : 0xc06185ed - 0xc0735c94 (1141 kB) .text : 0xc0400000 - 0xc06185ed (2145 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1701.44 BogoMIPS (lpj=850720) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0800) CPU0: AMD mobile AMD Duron(tm) Processor stepping 00 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=52 bytes sizeof(inode)=564 bytes sizeof(dentry)=156 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=2704 bytes PM: Adding info for No Bus:platform Time: 17:32:07 Date: 03/01/107 NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing PM: Adding info for acpi:acpi_system:00 PM: Adding info for acpi:button_power:00 PM: Adding info for acpi:ACPI0007:00 PM: Adding info for acpi:device:00 PM: Adding info for acpi:PNP0C0D:00 PM: Adding info for acpi:PNP0C0E:00 PM: Adding info for acpi:PNP0C0A:00 PM: Adding info for acpi:ACPI0003:00 PM: Adding info for acpi:PNP0A03:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0303:00 PM: Adding info for acpi:PNP0F13:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0700:00 PM: Adding info for acpi:PNP0401:00 PM: Adding info for acpi:PNP0501:00 PM: Adding info for acpi:PNP0C09:00 PM: Adding info for acpi:thermal:00 PM: Adding info for acpi:power_resource:00 PM: Adding info for acpi:PNP0C0B:00 PM: Adding info for acpi:thermal:01 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI quirk: region 8000-803f claimed by ali7101 ACPI PCI quirk: region 8040-805f claimed by ali7101 SMB 0000:00:0f.0: cannot adjust BAR0 (not I/O) 0000:00:0f.0: cannot adjust BAR1 (not I/O) 0000:00:0f.0: cannot adjust BAR2 (not I/O) 0000:00:0f.0: cannot adjust BAR3 (not I/O) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:04.0 PM: Adding info for pci:0000:00:04.1 PM: Adding info for pci:0000:00:06.0 PM: Adding info for pci:0000:00:07.0 PM: Adding info for pci:0000:00:08.0 PM: Adding info for pci:0000:00:08.1 PM: Adding info for pci:0000:00:0f.0 PM: Adding info for pci:0000:00:10.0 PM: Adding info for pci:0000:01:00.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs *9) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a pnp: PnP ACPI: found 11 devices usbcore: USB support disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. pnp: 00:07: ioport range 0x3810-0x381f has been reserved pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:07: ioport range 0x8000-0x805f could not be reserved pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:07: iomem range 0xfffc0000-0xffffffff has been reserved pnp: 00:07: iomem range 0xfec00000-0xfec00fff has been reserved PM: Adding info for No Bus:mem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PM: Adding info for No Bus:oldmem PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ea100000-efffffff PREFETCH window: 40000000-400fffff PCI: Bus 2, cardbus bridge: 0000:00:04.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 30000000-33ffffff MEM window: 34000000-37ffffff PCI: Bus 6, cardbus bridge: 0000:00:04.1 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 38000000-3bffffff MEM window: 3c000000-3fffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 7, 589824 bytes) TCP bind hash table entries: 16384 (order: 7, 524288 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 4175k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. PM: Adding info for platform:pcspkr PM: Adding info for No Bus:snapshot audit: initializing netlink socket (disabled) audit(1175448727.052:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 98F5BBBD6BAE5506 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 ACPI: Transitioning device [FAN] to D3 ACPI: Transitioning device [FAN] to D3 ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (53 C) Time: acpi_pm clocksource has been installed. PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12ac PM: Adding info for No Bus:hpet PM: Adding info for No Bus:nvram Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected ALi M1647 chipset PM: Adding info for No Bus:agpgart agpgart: AGP aperture is 64M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 PM: Removing info for No Bus:ttyS0 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:isa RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize PM: Adding info for No Bus:lo input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000020 PM: Adding info for No Bus:pcmcia_socket0 Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 PM: Adding info for No Bus:pcmcia_socket1 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice pccard: CardBus card inserted into slot 0 PM: Adding info for pci:0000:02:00.0 input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: SGTC: 10000 powernow: Minimum speed 300 MHz. Maximum speed 850 MHz. powernow-k8: Processor cpuid 670 not supported Using IPI No-Shortcut mode Magic number: 3:342:541 Freeing unused kernel memory: 248k freed Write protecting the kernel read-only data: 845k input: PS/2 Generic Mouse as /class/input/input2 SCSI subsystem initialized libata version 2.20 loaded. ACPI: Unable to derive IRQ for device 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15 scsi0 : pata_ali PM: Adding info for No Bus:host0 ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 <======== drive can do 100 ata1.00: 39070080 sectors, multi 16: LBA ata1.00: configured for UDMA/33 <=============== configured as 33 scsi1 : pata_ali PM: Adding info for No Bus:host1 ata2.00: ATAPI, max UDMA/33 <=== cd can't be read now ata2.00: configured for UDMA/33 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-2 00H1 PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 PM: Adding info for No Bus:target1:0:0 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata2: soft resetting port ATA: abnormal status 0xD0 on port 0x00010177 ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) ata2.00: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0xd0) ata2: port failed to respond (30 secs, Status 0xd0) ata2: soft resetting port ATA: abnormal status 0xD0 on port 0x00010177 ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) ata2.00: revalidation failed (errno=-5) ata2.00: limiting speed to UDMA/33:PIO3 ata2: failed to recover some devices, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0xd0) ata2: port failed to respond (30 secs, Status 0xd0) ata2: soft resetting port ATA: abnormal status 0xD0 on port 0x00010177 ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) ata2.00: revalidation failed (errno=-5) ata2.00: disabled ata2: EH complete PM: Removing info for No Bus:target1:0:0 SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda -------------------------------------- WARNING: Cannot find root file system! -------------------------------------- Create symlink /dev/root and then exit this shell to continue the boot sequence. =============== end of first dmesg ======================= Linux version 2.6.20-1.2933.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f000 size: 0000000000061000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001fff0000 size: 000000000000f000 end: 000000001ffff000 type: 3 copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 131056) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131056 HighMem 131056 -> 131056 early_node_map[1] active PFN ranges 0: 0 -> 131056 On node 0 totalpages: 131056 DMA zone: 40 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4056 pages, LIFO batch:0 Normal zone: 1239 pages used for memmap Normal zone: 125721 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.2 present. Using APIC driver default ACPI: RSDP (v000 PTLTD ) @ 0x000f7c20 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fffcc46 ACPI: FADT (v001 ALI M1533 0x06040000 PTL 0x000f4240) @ 0x1fffef64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fffefd8 ACPI: DSDT (v001 COMPAL 736 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) Detected 850.074 MHz processor. Built 1 zonelists. Total pages: 129777 Kernel command line: ro root=/dev/VolGroup00/LogVol00 nousb ide0=ata66 ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON! Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0150c000) Enabling fast FPU save and restore... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07aa000 soft=c078a000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511544k/524224k available (2188k kernel code, 12068k reserved, 1157k data, 236k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc074a000 - 0xc0785000 ( 236 kB) .data : 0xc0623031 - 0xc0744494 (1157 kB) .text : 0xc0400000 - 0xc0623031 (2188 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1700.86 BogoMIPS (lpj=850432) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0800) CPU0: AMD mobile AMD Duron(tm) Processor stepping 00 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=40 bytes sizeof(inode)=420 bytes sizeof(dentry)=144 bytes sizeof(ext3inode)=596 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1408 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 8000-803f claimed by ali7101 ACPI PCI quirk: region 8040-805f claimed by ali7101 SMB 0000:00:0f.0: cannot adjust BAR0 (not I/O) 0000:00:0f.0: cannot adjust BAR1 (not I/O) 0000:00:0f.0: cannot adjust BAR2 (not I/O) 0000:00:0f.0: cannot adjust BAR3 (not I/O) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs *9) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: USB support disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:07: ioport range 0x3810-0x381f has been reserved pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:07: ioport range 0x8000-0x805f could not be reserved pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ea100000-efffffff PREFETCH window: 40000000-400fffff PCI: Bus 2, cardbus bridge: 0000:00:04.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 30000000-33ffffff MEM window: 34000000-37ffffff PCI: Bus 6, cardbus bridge: 0000:00:04.1 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 38000000-3bffffff MEM window: 3c000000-3fffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 327680 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2134k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1175448888.930:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key A99AD4F3D245F54 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Transitioning device [FAN] to D3 ACPI: Transitioning device [FAN] to D3 ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (48 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected ALi M1647 chipset agpgart: AGP aperture is 64M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ACPI: Unable to derive IRQ for device 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HITACHI_DK23CA-20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 ide-floppy driver 0.99.newide Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000020 Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: SGTC: 10000 powernow: Minimum speed 300 MHz. Maximum speed 850 MHz. powernow-k8: Processor cpuid 670 not supported Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 236k freed Write protecting the kernel read-only data: 841k Time: acpi_pm clocksource has been installed. pccard: CardBus card inserted into slot 0 USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: PS/2 Generic Mouse as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1175448899.666:2): selinux=0 auid=4294967295 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Linux Tulip driver version 1.1.14 (May 11, 2002) PCI: Enabling device 0000:00:10.0 (0010 -> 0013) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 tulip0: MII transceiver #1 config 3000 status 7849 advertising 01e1. eth0: ADMtek Comet rev 17 at MMIO 0xea001000, 00:D0:59:5C:E0:EB, IRQ 11. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) input: PC Speaker as /class/input/input3 alim7101_wdt: Steve Hill . alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter. ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) alim7101_wdt: Steve Hill . alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter. wlan: 0.8.4.2 (svn r2246) ath_pci: 0.9.4.5 (svn r2246) PCI: Enabling device 0000:02:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ath_rate_sample: 1.2 (svn r2246) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 7.8 phy 4.5 radio 5.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0x34000000, irq=11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. lp0: using parport0 (interrupt-driven). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SBTN] No dock devices found. ibm_acpi: IBM ThinkPad ACPI Extras v0.13 ibm_acpi: http://ibm-acpi.sf.net/ md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:524280k Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4095 buckets, 32760 max) Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). ath0: no IPv6 routers present eth0: no IPv6 routers present -- "They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin) "The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)