From: Pierre Ossman <drzeus-mmc@drzeus.cx>
To: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH 18/36] Use menuconfig objects II - MMC
Date: Tue, 01 May 2007 17:57:32 +0200 [thread overview]
Message-ID: <4637636C.50704@drzeus.cx> (raw)
In-Reply-To: <Pine.LNX.4.61.0704301340180.29151@yvahk01.tjqt.qr>
[-- Attachment #1: Type: text/plain, Size: 472 bytes --]
Jan Engelhardt wrote:
> Change Kconfig objects from "menu, config" into "menuconfig" so
> that the user can disable the whole feature without having to
> enter the menu first.
>
> Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
>
As promised, an updated patch.
--
-- Pierre Ossman
Linux kernel, MMC maintainer http://www.kernel.org
PulseAudio, core developer http://pulseaudio.org
rdesktop, core developer http://www.rdesktop.org
[-- Attachment #2: menuconfig.patch --]
[-- Type: text/x-patch, Size: 4259 bytes --]
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 6c97491..45b7d53 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -2,10 +2,8 @@
# MMC subsystem configuration
#
-menu "MMC/SD Card support"
-
-config MMC
- tristate "MMC support"
+menuconfig MMC
+ tristate "MMC/SD card support"
help
MMC is the "multi-media card" bus protocol.
@@ -19,10 +17,12 @@ config MMC_DEBUG
This is an option for use by developers; most people should
say N here. This enables MMC core and driver debugging.
+if MMC
+
source "drivers/mmc/core/Kconfig"
source "drivers/mmc/card/Kconfig"
source "drivers/mmc/host/Kconfig"
-endmenu
+endif # MMC
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
index 01a9fd3..9320a8c 100644
--- a/drivers/mmc/card/Kconfig
+++ b/drivers/mmc/card/Kconfig
@@ -3,11 +3,10 @@
#
comment "MMC/SD Card Drivers"
- depends MMC
config MMC_BLOCK
tristate "MMC block device driver"
- depends on MMC && BLOCK
+ depends on BLOCK
default y
help
Say Y here to enable the MMC block device driver support.
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index 94222b9..ab37a6d 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -4,7 +4,6 @@
config MMC_UNSAFE_RESUME
bool "Allow unsafe resume (DANGEROUS)"
- depends on MMC != n
help
If you say Y here, the MMC layer will assume that all cards
stayed in their respective slots during the suspend. The
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index ed4deab..e23082f 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -3,11 +3,10 @@
#
comment "MMC/SD Host Controller Drivers"
- depends on MMC
config MMC_ARMMMCI
tristate "ARM AMBA Multimedia Card Interface support"
- depends on ARM_AMBA && MMC
+ depends on ARM_AMBA
help
This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
Interface (PL180 and PL181) support. If you have an ARM(R)
@@ -17,7 +16,7 @@ config MMC_ARMMMCI
config MMC_PXA
tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
- depends on ARCH_PXA && MMC
+ depends on ARCH_PXA
help
This selects the Intel(R) PXA(R) Multimedia card Interface.
If you have a PXA(R) platform with a Multimedia Card slot,
@@ -27,7 +26,7 @@ config MMC_PXA
config MMC_SDHCI
tristate "Secure Digital Host Controller Interface support (EXPERIMENTAL)"
- depends on PCI && MMC && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL
help
This select the generic Secure Digital Host Controller Interface.
It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
@@ -38,7 +37,7 @@ config MMC_SDHCI
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
- depends on ARCH_OMAP && MMC
+ depends on ARCH_OMAP
select TPS65010 if MACH_OMAP_H2
help
This selects the TI OMAP Multimedia card Interface.
@@ -49,7 +48,7 @@ config MMC_OMAP
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on MMC && ISA_DMA_API
+ depends on ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
@@ -60,7 +59,7 @@ config MMC_WBSD
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
- depends on MMC && SOC_AU1200
+ depends on SOC_AU1200
help
This selects the AMD Alchemy(R) Multimedia card interface.
If you have a Alchemy platform with a MMC slot, say Y or M here.
@@ -69,7 +68,7 @@ config MMC_AU1X
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support"
- depends on ARCH_AT91 && MMC
+ depends on ARCH_AT91
help
This selects the AT91 MCI controller.
@@ -77,7 +76,7 @@ config MMC_AT91
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX && MMC
+ depends on ARCH_IMX
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
@@ -87,7 +86,7 @@ config MMC_IMX
config MMC_TIFM_SD
tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)"
- depends on MMC && EXPERIMENTAL && PCI
+ depends on EXPERIMENTAL && PCI
select TIFM_CORE
help
Say Y here if you want to be able to access MMC/SD cards with
next prev parent reply other threads:[~2007-05-01 15:58 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-30 11:03 [PATCH 00/36] Use menuconfig objects II - (overview) Jan Engelhardt
2007-04-30 11:20 ` [PATCH 01/36] Use menuconfig objects I.b - block Jan Engelhardt
2007-04-30 11:20 ` [PATCH 02/36] Use menuconfig objects II - auxdisplay Jan Engelhardt
2007-04-30 11:21 ` [PATCH 03/36] Use menuconfig objects II - battery Jan Engelhardt
2007-04-30 11:22 ` [PATCH 04/36] Use menuconfig objects II - block devices Jan Engelhardt
2007-04-30 11:24 ` [PATCH 05/36] Use menuconfig objects II - EDAC Jan Engelhardt
2007-04-30 11:26 ` [PATCH 06/36] Use menuconfig objects II - fusion Jan Engelhardt
2007-04-30 11:27 ` [PATCH 07/36] Use menuconfig objects II - HID Jan Engelhardt
2007-04-30 11:28 ` [PATCH 08/36] Use menuconfig objects II - hwmon Jan Engelhardt
2007-05-03 16:58 ` Jean Delvare
2007-04-30 11:29 ` [PATCH 09/36] Use menuconfig objects II - IEEE1394 Jan Engelhardt
2007-04-30 11:32 ` [PATCH 10/36] Use menuconfig objects II - Infiniband Jan Engelhardt
2007-04-30 11:33 ` [PATCH 11/36] Use menuconfig objects II - IPMI Jan Engelhardt
2007-04-30 14:43 ` Corey Minyard
2007-04-30 11:35 ` [PATCH 12/36] Use menuconfig objects II - ISDN Jan Engelhardt
2007-04-30 11:35 ` [PATCH 13/36] Use menuconfig objects II - KVM/Virt Jan Engelhardt
2007-04-30 13:45 ` Avi Kivity
2007-04-30 11:36 ` [PATCH 14/36] Use menuconfig objects II - LED Jan Engelhardt
2007-04-30 11:37 ` [PATCH 15/36] Use menuconfig objects II - Macintosh Jan Engelhardt
2007-04-30 11:38 ` [PATCH 16/36] Use menuconfig objects II - MD Jan Engelhardt
2007-04-30 11:40 ` [PATCH 17/36] Use menuconfig objects II - misc strange dev Jan Engelhardt
2007-04-30 11:40 ` [PATCH 18/36] Use menuconfig objects II - MMC Jan Engelhardt
2007-04-30 13:51 ` Pierre Ossman
2007-05-01 15:57 ` Pierre Ossman [this message]
2007-05-01 20:37 ` Jan Engelhardt
2007-05-02 5:19 ` Pierre Ossman
2007-05-02 17:47 ` Jan Engelhardt
2007-04-30 11:41 ` [PATCH 19/36] Use menuconfig objects II - module menu Jan Engelhardt
2007-04-30 11:43 ` [PATCH 20/36] Use menuconfig objects II - netdev (general+100mbit) Jan Engelhardt
2007-04-30 11:44 ` [PATCH 21/36] Use menuconfig objects II - netdev/atm Jan Engelhardt
2007-04-30 11:45 ` [PATCH 22/36] Use menuconfig objects II - netdev/pcmcia Jan Engelhardt
2007-04-30 11:45 ` [PATCH 23/36] Use menuconfig objects II - netdev/wan Jan Engelhardt
2007-05-01 20:04 ` Krzysztof Halasa
2007-04-30 11:46 ` [PATCH 24/36] Use menuconfig objects II - oprofile Jan Engelhardt
2007-04-30 11:48 ` [PATCH 25/36] Use menuconfig objects II - (external_)power Jan Engelhardt
2007-04-30 11:49 ` [PATCH 26/36] Use menuconfig objects II - RTC Jan Engelhardt
2007-04-30 11:50 ` [PATCH 27/36] Use menuconfig objects II - SCSI Jan Engelhardt
2007-04-30 11:52 ` [PATCH 28/36] Use menuconfig objects II - sound Jan Engelhardt
2007-04-30 14:19 ` Johannes Berg
2007-04-30 14:25 ` Johannes Berg
2007-04-30 14:45 ` Jan Engelhardt
2007-04-30 14:55 ` Johannes Berg
2007-04-30 15:12 ` Jan Engelhardt
2007-04-30 15:14 ` Jan Engelhardt
2007-04-30 15:21 ` [PATCH 28/36 #2] " Jan Engelhardt
2007-04-30 15:41 ` Johannes Berg
2007-04-30 16:13 ` Jan Engelhardt
2007-04-30 11:53 ` [PATCH 29/36] Use menuconfig objects II - Telephony Jan Engelhardt
2007-04-30 11:53 ` [PATCH 30/36] Use menuconfig objects II - TPM Jan Engelhardt
2007-04-30 11:54 ` [PATCH 31/36] Use menuconfig objects II - UIO Jan Engelhardt
2007-04-30 11:55 ` [PATCH 32/36] Use menuconfig objects II - USB Jan Engelhardt
2007-04-30 11:56 ` [PATCH 33/36] Use menuconfig objects II - video/logo Jan Engelhardt
2007-05-01 0:08 ` Antonino A. Daplas
2007-04-30 11:56 ` [PATCH 34/36] Use menuconfig objects II - watchdog Jan Engelhardt
2007-04-30 12:30 ` [PATCH 35/36] Use menuconfig objects II - DVB Jan Engelhardt
2007-05-02 18:10 ` [v4l-dvb-maintainer] " Mauro Carvalho Chehab
2007-05-02 21:38 ` Trent Piepho
2007-05-03 6:56 ` Jan Engelhardt
2007-05-03 12:37 ` Mauro Carvalho Chehab
2007-05-03 12:54 ` Jan Engelhardt
2007-05-03 18:38 ` Mauro Carvalho Chehab
2007-05-03 20:39 ` Trent Piepho
2007-05-03 20:49 ` Sam Ravnborg
2007-05-04 0:28 ` Roman Zippel
2007-05-04 1:40 ` Trent Piepho
2007-05-04 7:46 ` Jan Engelhardt
2007-05-03 20:50 ` Sam Ravnborg
2007-05-03 20:53 ` Jan Engelhardt
2007-04-30 12:30 ` [PATCH 36/36] Use menuconfig objects II - V4L Jan Engelhardt
2007-05-02 18:03 ` [v4l-dvb-maintainer] " Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4637636C.50704@drzeus.cx \
--to=drzeus-mmc@drzeus.cx \
--cc=akpm@linux-foundation.org \
--cc=jengelh@linux01.gwdg.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox