* [patch] Add support for picopower irq router
@ 2007-05-01 9:40 Thomas Backlund
2007-05-01 16:10 ` Randy Dunlap
0 siblings, 1 reply; 5+ messages in thread
From: Thomas Backlund @ 2007-05-01 9:40 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 0 bytes --]
[-- Attachment #2: picopower-irq-router.patch --]
[-- Type: text/plain, Size: 3173 bytes --]
This patch adds support for PicoPower PT86C523 IRQ router to be used
with the in-kernel yenta driver for CardBus.
With this patch cardbus works on e.g. Dell Latitude XPi P150CD.
Initial patch for kernel 2.4 series by Sune Mølgaard
http://molgaard.org/code/linux-2.4.31-picopower.patch
Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)
Tested and confirmed that it works by Austin Acton.
Cleaned up a little for inclusion in a 2.6.21-rc7 & 2.6.21.1 based kernel.
Signed-Off-By: Thomas Backlund <tmb@mandriva.org>
arch/i386/pci/irq.c | 38 ++++++++++++++++++++++++++++++++++++++
include/linux/pci_ids.h | 3 +++
2 files changed, 41 insertions(+)
diff -Nurp 2.6.21-rc7/arch/i386/pci/irq.c 2.6.21-rc7.picopower/arch/i386/pci/irq.c
--- 2.6.21-rc7/arch/i386/pci/irq.c 2007-02-04 20:44:54.000000000 +0200
+++ 2.6.21-rc7.picopower/arch/i386/pci/irq.c 2007-04-24 15:26:21.000000000 +0300
@@ -491,6 +491,24 @@ static int pirq_amd756_set(struct pci_de
return 1;
}
+/*
+ * PicoPower PT86C523
+ */
+static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ outb(0x10+((pirq-1)>>1), 0x24);
+ return ((pirq-1)&1) ? (inb(0x26)>>4) : (inb(0x26)&0xf);
+}
+
+static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ outb(0x10+((pirq-1)>>1), 0x24);
+ unsigned int x;
+ x = inb(0x26);
+ x = ((pirq-1)&1) ? ((x&0x0f)|(irq<<4)) : ((x&0xf0)|(irq));
+ outb(x,0x26);
+}
+
#ifdef CONFIG_PCI_BIOS
static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
@@ -719,6 +737,25 @@ static __init int amd_router_probe(struc
return 1;
}
+static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523:
+ r->name = "PicoPower PT86C523";
+ r->get = pirq_pico_get;
+ r->set = pirq_pico_set;
+ return 1;
+
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
+ r->name = "PicoPower PT86C523 rev. BB+";
+ r->get = pirq_pico_get;
+ r->set = pirq_pico_set;
+ return 1;
+ }
+ return 0;
+}
+
static __initdata struct irq_router_handler pirq_routers[] = {
{ PCI_VENDOR_ID_INTEL, intel_router_probe },
{ PCI_VENDOR_ID_AL, ali_router_probe },
@@ -730,6 +767,7 @@ static __initdata struct irq_router_hand
{ PCI_VENDOR_ID_VLSI, vlsi_router_probe },
{ PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
{ PCI_VENDOR_ID_AMD, amd_router_probe },
+ { PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
/* Someone with docs needs to add the ATI Radeon IGP */
{ 0, NULL }
};
diff -Nurp 2.6.21-rc7/include/linux/pci_ids.h 2.6.21-rc7.picopower/include/linux/pci_ids.h
--- 2.6.21-rc7/include/linux/pci_ids.h 2007-04-24 14:37:59.000000000 +0300
+++ 2.6.21-rc7.picopower/include/linux/pci_ids.h 2007-04-24 15:26:21.000000000 +0300
@@ -819,6 +819,9 @@
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
+#define PCI_VENDOR_ID_PICOPOWER 0x1066
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
#define PCI_VENDOR_ID_MYLEX 0x1069
#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [patch] Add support for picopower irq router
2007-05-01 9:40 [patch] Add support for picopower irq router Thomas Backlund
@ 2007-05-01 16:10 ` Randy Dunlap
2007-05-01 17:05 ` [PATCH, try2] " Thomas Backlund
0 siblings, 1 reply; 5+ messages in thread
From: Randy Dunlap @ 2007-05-01 16:10 UTC (permalink / raw)
To: Thomas Backlund; +Cc: linux-kernel
On Tue, 01 May 2007 12:40:22 +0300 Thomas Backlund wrote:
> arg, attachment. :(
[parts of patch copy/pasted here for comments]
+static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ outb(0x10+((pirq-1)>>1), 0x24);
+ return ((pirq-1)&1) ? (inb(0x26)>>4) : (inb(0x26)&0xf);
+}
Be more liberal with the spacebar. It helps readability. Like so:
(and see Documentation/CodingStyle)
+ outb(0x10 + ((pirq - 1) >> 1), 0x24);
+ return ((pirq -1 ) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf);
Same for following functions.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ outb(0x10+((pirq-1)>>1), 0x24);
+ unsigned int x;
+ x = inb(0x26);
Data declarations must come before code.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
space after "switch".
+ {
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523:
Don't indent cases. Put at same column as {.
BTW, this is all in CodingStyle.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH, try2] Add support for picopower irq router
2007-05-01 16:10 ` Randy Dunlap
@ 2007-05-01 17:05 ` Thomas Backlund
2007-05-01 17:12 ` Randy Dunlap
0 siblings, 1 reply; 5+ messages in thread
From: Thomas Backlund @ 2007-05-01 17:05 UTC (permalink / raw)
To: linux-kernel; +Cc: Randy Dunlap
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: picopower-irq-router.patch --]
[-- Type: text/plain, Size: 3173 bytes --]
This patch adds support for PicoPower PT86C523 IRQ router to be used
with the in-kernel yenta driver for CardBus.
With this patch cardbus works on e.g. Dell Latitude XPi P150CD.
Initial patch for kernel 2.4 series by Sune Mølgaard
http://molgaard.org/code/linux-2.4.31-picopower.patch
Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)
Tested and confirmed that it works by Austin Acton.
Cleaned up a little for inclusion in a 2.6.21-rc7 & 2.6.21.1 based kernel.
Signed-Off-By: Thomas Backlund <tmb@mandriva.org>
arch/i386/pci/irq.c | 38 ++++++++++++++++++++++++++++++++++++++
include/linux/pci_ids.h | 3 +++
2 files changed, 41 insertions(+)
diff -Nurp 2.6.21-rc7/arch/i386/pci/irq.c 2.6.21-rc7.picopower/arch/i386/pci/irq.c
--- 2.6.21-rc7/arch/i386/pci/irq.c 2007-02-04 20:44:54.000000000 +0200
+++ 2.6.21-rc7.picopower/arch/i386/pci/irq.c 2007-04-24 15:26:21.000000000 +0300
@@ -491,6 +491,24 @@ static int pirq_amd756_set(struct pci_de
return 1;
}
+/*
+ * PicoPower PT86C523
+ */
+static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ outb(0x10+((pirq-1)>>1), 0x24);
+ return ((pirq-1)&1) ? (inb(0x26)>>4) : (inb(0x26)&0xf);
+}
+
+static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ outb(0x10+((pirq-1)>>1), 0x24);
+ unsigned int x;
+ x = inb(0x26);
+ x = ((pirq-1)&1) ? ((x&0x0f)|(irq<<4)) : ((x&0xf0)|(irq));
+ outb(x,0x26);
+}
+
#ifdef CONFIG_PCI_BIOS
static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
@@ -719,6 +737,25 @@ static __init int amd_router_probe(struc
return 1;
}
+static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch(device)
+ {
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523:
+ r->name = "PicoPower PT86C523";
+ r->get = pirq_pico_get;
+ r->set = pirq_pico_set;
+ return 1;
+
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
+ r->name = "PicoPower PT86C523 rev. BB+";
+ r->get = pirq_pico_get;
+ r->set = pirq_pico_set;
+ return 1;
+ }
+ return 0;
+}
+
static __initdata struct irq_router_handler pirq_routers[] = {
{ PCI_VENDOR_ID_INTEL, intel_router_probe },
{ PCI_VENDOR_ID_AL, ali_router_probe },
@@ -730,6 +767,7 @@ static __initdata struct irq_router_hand
{ PCI_VENDOR_ID_VLSI, vlsi_router_probe },
{ PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
{ PCI_VENDOR_ID_AMD, amd_router_probe },
+ { PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
/* Someone with docs needs to add the ATI Radeon IGP */
{ 0, NULL }
};
diff -Nurp 2.6.21-rc7/include/linux/pci_ids.h 2.6.21-rc7.picopower/include/linux/pci_ids.h
--- 2.6.21-rc7/include/linux/pci_ids.h 2007-04-24 14:37:59.000000000 +0300
+++ 2.6.21-rc7.picopower/include/linux/pci_ids.h 2007-04-24 15:26:21.000000000 +0300
@@ -819,6 +819,9 @@
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
+#define PCI_VENDOR_ID_PICOPOWER 0x1066
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
#define PCI_VENDOR_ID_MYLEX 0x1069
#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH, try2] Add support for picopower irq router
2007-05-01 17:05 ` [PATCH, try2] " Thomas Backlund
@ 2007-05-01 17:12 ` Randy Dunlap
2007-05-01 17:14 ` [PATCH, try3] " Thomas Backlund
0 siblings, 1 reply; 5+ messages in thread
From: Randy Dunlap @ 2007-05-01 17:12 UTC (permalink / raw)
To: Thomas Backlund; +Cc: linux-kernel
Thomas Backlund wrote:
>
>
Sorry, I don't see any changes. Did you send the wrong patch file?
> ------------------------------------------------------------------------
>
>
> This patch adds support for PicoPower PT86C523 IRQ router to be used
> with the in-kernel yenta driver for CardBus.
> With this patch cardbus works on e.g. Dell Latitude XPi P150CD.
>
> Initial patch for kernel 2.4 series by Sune Mølgaard
> http://molgaard.org/code/linux-2.4.31-picopower.patch
>
> Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)
>
> Tested and confirmed that it works by Austin Acton.
>
> Cleaned up a little for inclusion in a 2.6.21-rc7 & 2.6.21.1 based kernel.
>
> Signed-Off-By: Thomas Backlund <tmb@mandriva.org>
>
> arch/i386/pci/irq.c | 38 ++++++++++++++++++++++++++++++++++++++
> include/linux/pci_ids.h | 3 +++
> 2 files changed, 41 insertions(+)
>
> diff -Nurp 2.6.21-rc7/arch/i386/pci/irq.c 2.6.21-rc7.picopower/arch/i386/pci/irq.c
> --- 2.6.21-rc7/arch/i386/pci/irq.c 2007-02-04 20:44:54.000000000 +0200
> +++ 2.6.21-rc7.picopower/arch/i386/pci/irq.c 2007-04-24 15:26:21.000000000 +0300
> @@ -491,6 +491,24 @@ static int pirq_amd756_set(struct pci_de
> return 1;
> }
>
> +/*
> + * PicoPower PT86C523
> + */
> +static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
> +{
> + outb(0x10+((pirq-1)>>1), 0x24);
> + return ((pirq-1)&1) ? (inb(0x26)>>4) : (inb(0x26)&0xf);
> +}
> +
> +static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
> +{
> + outb(0x10+((pirq-1)>>1), 0x24);
> + unsigned int x;
> + x = inb(0x26);
> + x = ((pirq-1)&1) ? ((x&0x0f)|(irq<<4)) : ((x&0xf0)|(irq));
> + outb(x,0x26);
> +}
> +
> #ifdef CONFIG_PCI_BIOS
>
> static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
> @@ -719,6 +737,25 @@ static __init int amd_router_probe(struc
> return 1;
> }
>
> +static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
> +{
> + switch(device)
> + {
> + case PCI_DEVICE_ID_PICOPOWER_PT86C523:
> + r->name = "PicoPower PT86C523";
> + r->get = pirq_pico_get;
> + r->set = pirq_pico_set;
> + return 1;
> +
> + case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
> + r->name = "PicoPower PT86C523 rev. BB+";
> + r->get = pirq_pico_get;
> + r->set = pirq_pico_set;
> + return 1;
> + }
> + return 0;
> +}
> +
> static __initdata struct irq_router_handler pirq_routers[] = {
> { PCI_VENDOR_ID_INTEL, intel_router_probe },
> { PCI_VENDOR_ID_AL, ali_router_probe },
> @@ -730,6 +767,7 @@ static __initdata struct irq_router_hand
> { PCI_VENDOR_ID_VLSI, vlsi_router_probe },
> { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
> { PCI_VENDOR_ID_AMD, amd_router_probe },
> + { PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
> /* Someone with docs needs to add the ATI Radeon IGP */
> { 0, NULL }
> };
> diff -Nurp 2.6.21-rc7/include/linux/pci_ids.h 2.6.21-rc7.picopower/include/linux/pci_ids.h
> --- 2.6.21-rc7/include/linux/pci_ids.h 2007-04-24 14:37:59.000000000 +0300
> +++ 2.6.21-rc7.picopower/include/linux/pci_ids.h 2007-04-24 15:26:21.000000000 +0300
> @@ -819,6 +819,9 @@
> #define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
> #define PCI_DEVICE_ID_UMC_UM8886A 0x886a
>
> +#define PCI_VENDOR_ID_PICOPOWER 0x1066
> +#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002
> +#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
>
> #define PCI_VENDOR_ID_MYLEX 0x1069
> #define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH, try3] Add support for picopower irq router
2007-05-01 17:12 ` Randy Dunlap
@ 2007-05-01 17:14 ` Thomas Backlund
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Backlund @ 2007-05-01 17:14 UTC (permalink / raw)
To: Randy Dunlap; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 160 bytes --]
Randy Dunlap skrev:
> Thomas Backlund wrote:
>>
>>
>
> Sorry, I don't see any changes. Did you send the wrong patch file?
>
Yep :-(
Here is the correct one:
[-- Attachment #2: picopower-irq-router.patch --]
[-- Type: text/plain, Size: 3300 bytes --]
This patch adds support for PicoPower PT86C523 IRQ router to be used
with the in-kernel yenta driver for CardBus.
With this patch cardbus works on e.g. Dell Latitude XPi P150CD.
Initial patch for kernel 2.4 series by Sune Mølgaard
http://molgaard.org/code/linux-2.4.31-picopower.patch
Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)
Testing and confirmation that it works by Austin Acton
Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel.
Added some more cleanups according to CodingStyle, as noted by
Randy Dunlap on LKML.
Signed-Off-By: Thomas Backlund <tmb@mandriva.org>
arch/i386/pci/irq.c | 37 +++++++++++++++++++++++++++++++++++++
include/linux/pci_ids.h | 3 +++
2 files changed, 40 insertions(+)
diff -Nurp linux-2.6.21.1/arch/i386/pci/irq.c linux-2.6.21.1.picopower/arch/i386/pci/irq.c
--- linux-2.6.21.1/arch/i386/pci/irq.c 2007-05-01 19:42:29.000000000 +0300
+++ linux-2.6.21.1.picopower/arch/i386/pci/irq.c 2007-05-01 19:50:48.000000000 +0300
@@ -491,6 +491,24 @@ static int pirq_amd756_set(struct pci_de
return 1;
}
+/*
+ * PicoPower PT86C523
+ */
+static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+ outb(0x10 + ((pirq - 1) >> 1), 0x24);
+ return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf);
+}
+
+static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+ unsigned int x;
+ outb(0x10 + ((pirq - 1) >> 1), 0x24);
+ x = inb(0x26);
+ x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq));
+ outb(x, 0x26);
+}
+
#ifdef CONFIG_PCI_BIOS
static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
@@ -719,6 +737,24 @@ static __init int amd_router_probe(struc
return 1;
}
+static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+ switch (device) {
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523:
+ r->name = "PicoPower PT86C523";
+ r->get = pirq_pico_get;
+ r->set = pirq_pico_set;
+ return 1;
+
+ case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
+ r->name = "PicoPower PT86C523 rev. BB+";
+ r->get = pirq_pico_get;
+ r->set = pirq_pico_set;
+ return 1;
+ }
+ return 0;
+}
+
static __initdata struct irq_router_handler pirq_routers[] = {
{ PCI_VENDOR_ID_INTEL, intel_router_probe },
{ PCI_VENDOR_ID_AL, ali_router_probe },
@@ -730,6 +766,7 @@ static __initdata struct irq_router_hand
{ PCI_VENDOR_ID_VLSI, vlsi_router_probe },
{ PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
{ PCI_VENDOR_ID_AMD, amd_router_probe },
+ { PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
/* Someone with docs needs to add the ATI Radeon IGP */
{ 0, NULL }
};
diff -Nurp linux-2.6.21.1/include/linux/pci_ids.h linux-2.6.21.1.picopower/include/linux/pci_ids.h
--- linux-2.6.21.1/include/linux/pci_ids.h 2007-05-01 19:42:29.000000000 +0300
+++ linux-2.6.21.1.picopower/include/linux/pci_ids.h 2007-05-01 19:40:54.000000000 +0300
@@ -819,6 +819,9 @@
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
+#define PCI_VENDOR_ID_PICOPOWER 0x1066
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002
#define PCI_VENDOR_ID_MYLEX 0x1069
#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-05-01 17:14 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-01 9:40 [patch] Add support for picopower irq router Thomas Backlund
2007-05-01 16:10 ` Randy Dunlap
2007-05-01 17:05 ` [PATCH, try2] " Thomas Backlund
2007-05-01 17:12 ` Randy Dunlap
2007-05-01 17:14 ` [PATCH, try3] " Thomas Backlund
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox