Re: [2.6.21.1] SATA freeze

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Re: [2.6.21.1] SATA freeze
       [not found]       ` <fa.9rF0YSLySQV/+6iXNTOmlASflXA@ifi.uio.no>
@ 2007-05-12 18:34         ` Robert Hancock
  0 siblings, 0 replies; 16+ messages in thread
From: Robert Hancock @ 2007-05-12 18:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Gerhard Mack

Gerhard Mack wrote:
> On Wed, 9 May 2007, Robert Hancock wrote:
>> Gerhard Mack wrote:
>>> On Wed, 9 May 2007, Jeff Garzik wrote:
>>>> Gerhard Mack wrote:
>>>>> May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0
>>>>> SErr
>>>>> 0x1800000 action 0x2 frozen
>>>>> May  9 14:51:35 mgerhard kernel: ata1.00: cmd
>>>>> 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>>>>> May  9 14:51:35 mgerhard kernel:          res
>>>>> 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
>>>>> May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please
>>>>> be
>>>>> patient (Status 0xd0)
>>>>>
>>>>> Anything I can do to figgure out what's causing this?
>> You're showing various flags set in the SError register, which suggests you're
>> having SATA communication problems with the drive. A bad SATA cable or power
>> problems would be a strong possibility.
>>
>> It really would be nice if we decoded these things more usefully for the user
>> (same with the regular ATA errors, like drivers/ide does), but in general
>> SError showing up as non-zero is a bad thing:
>>
>> 0x400000 = "Handshake error: When set to one, this bit indicates that one or
>> more R_ERR handshake response was received in response to frame transmission.
>> Such errors may be the result of a CRC error detected by the recipient, a
>> disparity or 10b/8b decoding error, or other error condition leading to a
>> negative handshake on a transmitted frame."
>>
>> 0x1800000 = "Link Sequence Error: When set to one, this bit indicates that one
>> or more Link state machine error conditions was encountered since the last
>> time this bit was cleared. The Link Layer state machine defines the conditions
>> under which the link layer detects an erroneous transition."
>>
>> and
>>
>> "Transport state transition error: When set to one, this bit indicates that an
>> error has occurred in the transition from one state to another within the
>> Transport layer since the last time this bit was cleared."
> 
> 
> Just out of curiosity how often is that bit cleared?

I believe that is cleared only on error handling or controller reset, so 
   it just means that it happened sometime since boot or the last libata 
error recovery.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
@ 2007-06-04 12:59 Tomasz Chmielewski
  0 siblings, 0 replies; 16+ messages in thread
From: Tomasz Chmielewski @ 2007-06-04 12:59 UTC (permalink / raw)
  To: LKML; +Cc: gmack

Fred Moyer wrote:

>> Sounds like SMART is likely disabled on that drive. You can try doing 
>> "smartctl -s on /dev/sda" and see if that will turn it on.
>> 
> 
> Sorry - that last post of mine was brain dead.  Here's the one with 
> (hopefully) useful data.
> 
> app2 ~ # smartctl  -d ata -a /dev/sda
> smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
> 

(...)

>    -- -- -- -- -- -- --
>    84 51 00 b5 c9 73 e0  Error: ICRC, ABRT at LBA = 0x0073c9b5 = 7588277
> 
>    Commands leading to the command that caused the error were:
>    CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>    -- -- -- -- -- -- -- --  ----------------  --------------------
>    25 00 20 96 c9 73 e0 00      01:25:42.886  READ DMA EXT
>    b0 d0 01 00 4f c2 00 02      01:25:42.868  SMART READ DATA
>    35 00 08 ae b6 42 e0 00      01:25:42.456  WRITE DMA EXT
>    b0 da 00 00 4f c2 00 00      01:25:42.430  SMART RETURN STATUS
>    35 00 08 60 81 04 e0 00      01:25:42.376  WRITE DMA EXT

I was getting very similar SMART results, and kernel errors, when used 
PATA drive and SATA_VIA (no freezes or hangs though):


SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
          res 51/04:00:0b:ff:bf/00:00:00:00:00/00 Emask 0x1 (device error)
ata3.00: configured for UDMA/100
ata3: EH complete
SCSI device sda: write cache: enabled, read cache: enabled, doesn't 
support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
          res 51/04:01:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata3.00: configured for UDMA/100
ata3: EH complete



The problem was that I started smartd with wrong parameters:

DEVICESCAN -a -o on -S on -s (S/../.././10|L/../../6/11)


It was solved when I added "-d sat" to smartd parameters:

DEVICESCAN -d sat -a -o on -S on -s (S/../.././10|L/../../6/11)


 From that time on, smartctl -a /dev/sda gives "normal" output, and no 
more strange kernel errors.

Hopefully, it'll get fixed in smartmontools soon (or is fixed already, 
but not yet mainline).


-- 
Tomasz Chmielewski
http://wpkg.org



^ permalink raw reply	[flat|nested] 16+ messages in thread

[parent not found: <fa.zU1kuoSgByTYCYqY+iCQ5rMJy34@ifi.uio.no>]

* Re: [2.6.21.1] SATA freeze
       [not found] <fa.zU1kuoSgByTYCYqY+iCQ5rMJy34@ifi.uio.no>
@ 2007-05-12 18:48 ` Robert Hancock
  2007-05-12 19:09   ` Fred Moyer
  2007-05-13  1:20   ` Robin H. Johnson
  0 siblings, 2 replies; 16+ messages in thread
From: Robert Hancock @ 2007-05-12 18:48 UTC (permalink / raw)
  To: Fred Moyer; +Cc: linux-kernel, linux-ide

Fred Moyer wrote:
> I just joined the list today so apologies if this email breaks any email 
> client post threading.
> 
> I have been seeing similar errors on two different systems.  I applied 
> Robert's sata_nv patch posted to the list on May 5th, and approved today 
> by Jeff Garzik.  I've taken several steps to insure that this isn't a 
> faulty cable or drive issue.  This is running on a hp dl145g2.  Here is 
> my lspci, dmesg, and relevant kernel config sections:

(snip)

> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 
> 123392 in
>          res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM 
> violation)
> ata1: soft resetting port
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete

This appears to be a different problem. Something is issuing 
SMART-related commands (smartd or smartctl perhaps) which the drive 
seems to be reacting strangely to. It apparently completed the command 
but never raised DRQ to request any data being transferred even though 
we expected it to. Maybe SMART is disabled on the drive and that's 
causing it to just toss these commands? CCing linux-ide in case anyone 
knows what would cause this.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-12 18:48 ` Robert Hancock
@ 2007-05-12 19:09   ` Fred Moyer
  2007-05-13  1:02     ` Robert Hancock
  2007-05-13  1:20   ` Robin H. Johnson
  1 sibling, 1 reply; 16+ messages in thread
From: Fred Moyer @ 2007-05-12 19:09 UTC (permalink / raw)
  To: Robert Hancock; +Cc: linux-kernel, linux-ide

Robert Hancock wrote:
> Fred Moyer wrote:
>> I just joined the list today so apologies if this email breaks any 
>> email client post threading.
>>
>> I have been seeing similar errors on two different systems.  I applied 
>> Robert's sata_nv patch posted to the list on May 5th, and approved 
>> today by Jeff Garzik.  I've taken several steps to insure that this 
>> isn't a faulty cable or drive issue.  This is running on a hp 
>> dl145g2.  Here is my lspci, dmesg, and relevant kernel config sections:
> 
> (snip)
> 
>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>> ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 
>> 123392 in
>>          res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM 
>> violation)
>> ata1: soft resetting port
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> ata1.00: configured for UDMA/100
>> ata1: EH complete
> 
> This appears to be a different problem. Something is issuing 
> SMART-related commands (smartd or smartctl perhaps) which the drive 
> seems to be reacting strangely to. It apparently completed the command 
> but never raised DRQ to request any data being transferred even though 
> we expected it to. Maybe SMART is disabled on the drive and that's 
> causing it to just toss these commands? CCing linux-ide in case anyone 
> knows what would cause this.

Here's smartctl -a for this drive - same output for both sda and sdb. 
Smartd is currently running.  Any advice appreciated.

Previously on 2.6.15 I was seeing sdb remount as readonly under heavy 
i/o.  I have not seen that issue yet with 2.6.21 (with Robert's patch 
from May 5th for sata_nv), but that occurrence of remounts read-only was 
infrequently, so that issue may be solved.

app2 ~ # smartctl -a /dev/sda
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: ATA      ST3808110AS      Version: n/a
Serial number:             5LR8895K
Device type: disk
Local Time is: Sat May 12 12:05:58 2007 PDT
Device does not support SMART

Error Counter logging not supported

[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging

app2 ~ # ps aux | grep smart
root      5227  0.0  0.0   2892   672 ?        S    May11   0:00 
/usr/sbin/smartd -p /var/run/smartd.pid
root     19510  0.0  0.0   2648   648 pts/0    S+   12:07   0:00 grep 
--colour=auto smart

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-12 19:09   ` Fred Moyer
@ 2007-05-13  1:02     ` Robert Hancock
  2007-05-13  1:52       ` Fred Moyer
  0 siblings, 1 reply; 16+ messages in thread
From: Robert Hancock @ 2007-05-13  1:02 UTC (permalink / raw)
  To: Fred Moyer; +Cc: linux-kernel, linux-ide

Fred Moyer wrote:
>> This appears to be a different problem. Something is issuing 
>> SMART-related commands (smartd or smartctl perhaps) which the drive 
>> seems to be reacting strangely to. It apparently completed the command 
>> but never raised DRQ to request any data being transferred even though 
>> we expected it to. Maybe SMART is disabled on the drive and that's 
>> causing it to just toss these commands? CCing linux-ide in case anyone 
>> knows what would cause this.
> 
> Here's smartctl -a for this drive - same output for both sda and sdb. 
> Smartd is currently running.  Any advice appreciated.
> 
> Previously on 2.6.15 I was seeing sdb remount as readonly under heavy 
> i/o.  I have not seen that issue yet with 2.6.21 (with Robert's patch 
> from May 5th for sata_nv), but that occurrence of remounts read-only was 
> infrequently, so that issue may be solved.
> 
> app2 ~ # smartctl -a /dev/sda
> smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce 
> Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> Device: ATA      ST3808110AS      Version: n/a
> Serial number:             5LR8895K
> Device type: disk
> Local Time is: Sat May 12 12:05:58 2007 PDT
> Device does not support SMART
> 
> Error Counter logging not supported
> 
> [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
> Device does not support Self Test logging
> 

Sounds like SMART is likely disabled on that drive. You can try doing 
"smartctl -s on /dev/sda" and see if that will turn it on.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-13  1:02     ` Robert Hancock
@ 2007-05-13  1:52       ` Fred Moyer
  0 siblings, 0 replies; 16+ messages in thread
From: Fred Moyer @ 2007-05-13  1:52 UTC (permalink / raw)
  To: Robert Hancock; +Cc: linux-kernel, linux-ide

Robert Hancock wrote:
> Fred Moyer wrote:
>>> This appears to be a different problem. Something is issuing 
>>> SMART-related commands (smartd or smartctl perhaps) which the drive 
>>> seems to be reacting strangely to. It apparently completed the 
>>> command but never raised DRQ to request any data being transferred 
>>> even though we expected it to. Maybe SMART is disabled on the drive 
>>> and that's causing it to just toss these commands? CCing linux-ide in 
>>> case anyone knows what would cause this.
>>
>> Here's smartctl -a for this drive - same output for both sda and sdb. 
>> Smartd is currently running.  Any advice appreciated.
>>
> Sounds like SMART is likely disabled on that drive. You can try doing 
> "smartctl -s on /dev/sda" and see if that will turn it on.
> 

Sorry - that last post of mine was brain dead.  Here's the one with 
(hopefully) useful data.

app2 ~ # smartctl  -d ata -a /dev/sda
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3808110AS
Serial Number:    5LR8895K
Firmware Version: 3.AJJ
User Capacity:    80,026,361,856 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat May 12 18:49:06 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                         was completed without error.
                                         Auto Offline Data Collection: 
Enabled.
Self-test execution status:      (   0) The previous self-test routine 
completed
                                         without error or no self-test 
has ever
                                         been run.
Total time to complete Offline
data collection:                 ( 431) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                         Auto Offline data collection 
on/off support.
                                         Suspend Offline collection upon new
                                         command.
                                         Offline surface scan supported.
                                         Self-test supported.
                                         No Conveyance Self-test supported.
                                         Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                         power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                         General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  27) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE 
UPDATED  WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail 
Always       -       0
   3 Spin_Up_Time            0x0002   097   094   000    Old_age 
Always       -       0
   4 Start_Stop_Count        0x0033   100   100   020    Pre-fail 
Always       -       41
   5 Reallocated_Sector_Ct   0x0033   098   098   036    Pre-fail 
Always       -       80
   7 Seek_Error_Rate         0x000f   073   060   030    Pre-fail 
Always       -       23194052
   9 Power_On_Hours          0x0032   096   096   000    Old_age 
Always       -       3899
  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail 
Always       -       0
  12 Power_Cycle_Count       0x0033   100   100   020    Pre-fail 
Always       -       108
187 Unknown_Attribute       0x0032   001   001   000    Old_age   Always 
       -       17863
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always 
       -       0
190 Unknown_Attribute       0x0022   070   057   045    Old_age   Always 
       -       2689188364318
194 Temperature_Celsius     0x0022   030   043   000    Old_age   Always 
       -       30 (Lifetime Min/Max 0/22)
195 Hardware_ECC_Recovered  0x001a   048   045   000    Old_age   Always 
       -       2474070
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always 
       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age 
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always 
       -       7
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age 
Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always 
       -       0

SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
         CR = Command Register [HEX]
         FR = Features Register [HEX]
         SC = Sector Count Register [HEX]
         SN = Sector Number Register [HEX]
         CL = Cylinder Low Register [HEX]
         CH = Cylinder High Register [HEX]
         DH = Device/Head Register [HEX]
         DC = Device Command Register [HEX]
         ER = Error register [HEX]
         ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 8 occurred at disk power-on lifetime: 3753 hours (156 days + 9 hours)
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   84 51 00 78 7a 06 e0  Error: ICRC, ABRT at LBA = 0x00067a78 = 424568

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
   -- -- -- -- -- -- -- --  ----------------  --------------------
   25 00 40 39 7a 06 e0 00      02:55:54.633  READ DMA EXT
   b0 d0 01 00 4f c2 00 02      02:55:52.076  SMART READ DATA
   b0 da 00 00 4f c2 00 00      02:55:51.992  SMART RETURN STATUS
   35 00 08 10 52 04 e0 00      02:55:51.903  WRITE DMA EXT
   35 00 a0 70 51 04 e0 00      02:55:51.892  WRITE DMA EXT

Error 7 occurred at disk power-on lifetime: 3751 hours (156 days + 7 hours)
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   84 51 00 bf ec 43 e0  Error: ICRC, ABRT at LBA = 0x0043ecbf = 4451519

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
   -- -- -- -- -- -- -- --  ----------------  --------------------
   25 00 08 b8 ec 43 e0 00      02:25:46.836  READ DMA EXT
   b0 d0 01 00 4f c2 00 02      02:25:46.818  SMART READ DATA
   b0 da 00 00 4f c2 00 00      02:25:44.880  SMART RETURN STATUS
   35 00 08 f8 bc 04 e0 00      02:25:44.866  WRITE DMA EXT
   35 00 20 d8 bc 04 e0 00      02:25:44.858  WRITE DMA EXT

Error 6 occurred at disk power-on lifetime: 3751 hours (156 days + 7 hours)
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   84 51 00 88 7a 17 e0  Error: ICRC, ABRT at LBA = 0x00177a88 = 1538696

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
   -- -- -- -- -- -- -- --  ----------------  --------------------
   25 00 08 81 7a 17 e0 00      01:55:42.014  READ DMA EXT
   b0 d0 01 00 4f c2 00 02      01:55:41.990  SMART READ DATA
   b0 da 00 00 4f c2 00 00      02:01:18.894  SMART RETURN STATUS
   35 00 08 a0 21 04 e0 00      01:55:48.306  WRITE DMA EXT
   35 00 98 08 21 04 e0 00      01:55:48.098  WRITE DMA EXT

Error 5 occurred at disk power-on lifetime: 3750 hours (156 days + 6 hours)
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   84 51 00 b5 c9 73 e0  Error: ICRC, ABRT at LBA = 0x0073c9b5 = 7588277

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
   -- -- -- -- -- -- -- --  ----------------  --------------------
   25 00 20 96 c9 73 e0 00      01:25:42.886  READ DMA EXT
   b0 d0 01 00 4f c2 00 02      01:25:42.868  SMART READ DATA
   35 00 08 ae b6 42 e0 00      01:25:42.456  WRITE DMA EXT
   b0 da 00 00 4f c2 00 00      01:25:42.430  SMART RETURN STATUS
   35 00 08 60 81 04 e0 00      01:25:42.376  WRITE DMA EXT

Error 4 occurred at disk power-on lifetime: 3749 hours (156 days + 5 hours)
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   84 51 00 4d 94 3e e0  Error: ICRC, ABRT at LBA = 0x003e944d = 4101197

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
   -- -- -- -- -- -- -- --  ----------------  --------------------
   25 00 08 46 94 3e e0 00      00:55:35.846  READ DMA EXT
   b0 d0 01 00 4f c2 00 02      00:55:35.774  SMART READ DATA
   b0 da 00 00 4f c2 00 00      00:55:35.732  SMART RETURN STATUS
   35 00 08 20 b3 04 e0 00      00:55:35.649  WRITE DMA EXT
   35 00 90 90 b2 04 e0 00      00:55:35.337  WRITE DMA EXT

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-12 18:48 ` Robert Hancock
  2007-05-12 19:09   ` Fred Moyer
@ 2007-05-13  1:20   ` Robin H. Johnson
  2007-05-13 18:18     ` Jim Paris
  1 sibling, 1 reply; 16+ messages in thread
From: Robin H. Johnson @ 2007-05-13  1:20 UTC (permalink / raw)
  To: Robert Hancock, linux-ide; +Cc: Fred Moyer, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1970 bytes --]

On Sat, May 12, 2007 at 12:48:59PM -0600, Robert Hancock wrote:
>  Fred Moyer wrote:
> > I just joined the list today so apologies if this email breaks any email 
> > client post threading.
> > I have been seeing similar errors on two different systems.  I applied 
> > Robert's sata_nv patch posted to the list on May 5th, and approved today by 
> > Jeff Garzik.  I've taken several steps to insure that this isn't a faulty 
> > cable or drive issue.  This is running on a hp dl145g2.  Here is my lspci, 
> > dmesg, and relevant kernel config sections:
> 
>  (snip)
> 
> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 
> > in
> >          res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM 
> > violation)
> > ata1: soft resetting port
> > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > ata1.00: configured for UDMA/100
> > ata1: EH complete
> 
>  This appears to be a different problem. Something is issuing SMART-related 
>  commands (smartd or smartctl perhaps) which the drive seems to be reacting 
>  strangely to. It apparently completed the command but never raised DRQ to 
>  request any data being transferred even though we expected it to. Maybe 
>  SMART is disabled on the drive and that's causing it to just toss these 
>  commands? CCing linux-ide in case anyone knows what would cause this.
I previously posted a near identical error to linux-ide.
http://article.gmane.org/gmane.linux.ide/18375

Specifically, I could trigger it by running 'smartctl -d ata -S on
/dev/sda' OR (s-S/o/).

Same sata_nv controller, two different drives, many different cables.
Reproducible over 7 systems [two different models of Tyan mobo] that I
have.

-- 
Robin Hugh Johnson
Gentoo Linux Developer & Council Member
E-Mail     : robbat2@gentoo.org
GnuPG FP   : 11AC BA4F 4778 E3F6 E4ED  F38E B27B 944E 3488 4E85

[-- Attachment #2: Type: application/pgp-signature, Size: 321 bytes --]

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-13  1:20   ` Robin H. Johnson
@ 2007-05-13 18:18     ` Jim Paris
  0 siblings, 0 replies; 16+ messages in thread
From: Jim Paris @ 2007-05-13 18:18 UTC (permalink / raw)
  To: Robin H. Johnson; +Cc: Robert Hancock, linux-ide, Fred Moyer, linux-kernel

> >  This appears to be a different problem. Something is issuing SMART-related 
> >  commands (smartd or smartctl perhaps) which the drive seems to be reacting 
> >  strangely to.
..
> Specifically, I could trigger it by running 'smartctl -d ata -S on
> /dev/sda' OR (s-S/o/).

This sounds like a known bug in smartmontools:

  http://marc.info/?l=smartmontools-support&m=117203137719518
  http://www.mail-archive.com/linux-ide@vger.kernel.org/msg03160.html

-jim

^ permalink raw reply	[flat|nested] 16+ messages in thread

[parent not found: <fa.Ngs+g4HBWK5JUzEhRMjcVQVR448@ifi.uio.no>]

[parent not found: <fa.xHed6JNWpYYFYmDy7FY+p6HTjPw@ifi.uio.no>]

[parent not found: <fa.I0i3SlPzvZnxCYuJNFL3tixqEJU@ifi.uio.no>]

* Re: [2.6.21.1] SATA freeze
       [not found]   ` <fa.I0i3SlPzvZnxCYuJNFL3tixqEJU@ifi.uio.no>
@ 2007-05-09 23:48     ` Robert Hancock
  2007-05-10 11:40       ` Gerhard Mack
  0 siblings, 1 reply; 16+ messages in thread
From: Robert Hancock @ 2007-05-09 23:48 UTC (permalink / raw)
  To: Gerhard Mack, linux-kernel; +Cc: Jeff Garzik

Gerhard Mack wrote:
> On Wed, 9 May 2007, Jeff Garzik wrote:
>> Gerhard Mack wrote:
>>> May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>> 0x1800000 action 0x2 frozen
>>> May  9 14:51:35 mgerhard kernel: ata1.00: cmd
>>> 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>>> May  9 14:51:35 mgerhard kernel:          res
>>> 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
>>> May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be
>>> patient (Status 0xd0)
>>>
>>> Anything I can do to figgure out what's causing this?

You're showing various flags set in the SError register, which suggests 
you're having SATA communication problems with the drive. A bad SATA 
cable or power problems would be a strong possibility.

It really would be nice if we decoded these things more usefully for the 
user (same with the regular ATA errors, like drivers/ide does), but in 
general SError showing up as non-zero is a bad thing:

0x400000 = "Handshake error: When set to one, this bit indicates that 
one or more R_ERR handshake response was received in response to frame 
transmission. Such errors may be the result of a CRC error detected by 
the recipient, a disparity or 10b/8b decoding error, or other error 
condition leading to a negative handshake on a transmitted frame."

0x1800000 = "Link Sequence Error: When set to one, this bit indicates 
that one or more Link state machine error conditions was encountered 
since the last time this bit was cleared. The Link Layer state machine 
defines the conditions under which the link layer detects an erroneous 
transition."

and

"Transport state transition error: When set to one, this bit indicates 
that an error has occurred in the transition from one state to another 
within the Transport layer since the last time this bit was cleared."

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-09 23:48     ` Robert Hancock
@ 2007-05-10 11:40       ` Gerhard Mack
  0 siblings, 0 replies; 16+ messages in thread
From: Gerhard Mack @ 2007-05-10 11:40 UTC (permalink / raw)
  To: Robert Hancock; +Cc: linux-kernel, Jeff Garzik

On Wed, 9 May 2007, Robert Hancock wrote:
> Gerhard Mack wrote:
> > On Wed, 9 May 2007, Jeff Garzik wrote:
> > > Gerhard Mack wrote:
> > > > May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0
> > > > SErr
> > > > 0x1800000 action 0x2 frozen
> > > > May  9 14:51:35 mgerhard kernel: ata1.00: cmd
> > > > 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
> > > > May  9 14:51:35 mgerhard kernel:          res
> > > > 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
> > > > May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please
> > > > be
> > > > patient (Status 0xd0)
> > > > 
> > > > Anything I can do to figgure out what's causing this?
> 
> You're showing various flags set in the SError register, which suggests you're
> having SATA communication problems with the drive. A bad SATA cable or power
> problems would be a strong possibility.
> 
> It really would be nice if we decoded these things more usefully for the user
> (same with the regular ATA errors, like drivers/ide does), but in general
> SError showing up as non-zero is a bad thing:
> 
> 0x400000 = "Handshake error: When set to one, this bit indicates that one or
> more R_ERR handshake response was received in response to frame transmission.
> Such errors may be the result of a CRC error detected by the recipient, a
> disparity or 10b/8b decoding error, or other error condition leading to a
> negative handshake on a transmitted frame."
> 
> 0x1800000 = "Link Sequence Error: When set to one, this bit indicates that one
> or more Link state machine error conditions was encountered since the last
> time this bit was cleared. The Link Layer state machine defines the conditions
> under which the link layer detects an erroneous transition."
> 
> and
> 
> "Transport state transition error: When set to one, this bit indicates that an
> error has occurred in the transition from one state to another within the
> Transport layer since the last time this bit was cleared."


Just out of curiosity how often is that bit cleared?

	Gerhard

--
Gerhard Mack

gmack@innerfire.net

<>< As a computer I find your faith in technology amusing.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [2.6.21.1] SATA freeze
@ 2007-05-09 18:54 Gerhard Mack
  2007-05-09 19:53 ` Jeff Garzik
  0 siblings, 1 reply; 16+ messages in thread
From: Gerhard Mack @ 2007-05-09 18:54 UTC (permalink / raw)
  To: linux-kernel

May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 
SErr 0x1800000 action 0x2 frozen
May  9 14:51:35 mgerhard kernel: ata1.00: cmd 
35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:51:35 mgerhard kernel:          res 
40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be 
patient (Status 0xd0)

Anything I can do to figgure out what's causing this?

	Gerhard
 

--
Gerhard Mack

gmack@innerfire.net

<>< As a computer I find your faith in technology amusing.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-09 18:54 Gerhard Mack
@ 2007-05-09 19:53 ` Jeff Garzik
  2007-05-09 21:43   ` Gerhard Mack
  0 siblings, 1 reply; 16+ messages in thread
From: Jeff Garzik @ 2007-05-09 19:53 UTC (permalink / raw)
  To: Gerhard Mack; +Cc: linux-kernel

Gerhard Mack wrote:
> May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 
> SErr 0x1800000 action 0x2 frozen
> May  9 14:51:35 mgerhard kernel: ata1.00: cmd 
> 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
> May  9 14:51:35 mgerhard kernel:          res 
> 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
> May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be 
> patient (Status 0xd0)
> 
> Anything I can do to figgure out what's causing this?

Provide full lspci, dmesg, kernel config?

	Jeff




^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-09 19:53 ` Jeff Garzik
@ 2007-05-09 21:43   ` Gerhard Mack
  2007-05-09 22:58     ` Chuck Ebbert
  2007-05-10  8:51     ` Mikael Pettersson
  0 siblings, 2 replies; 16+ messages in thread
From: Gerhard Mack @ 2007-05-09 21:43 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: linux-kernel

[-- Attachment #1: Type: TEXT/PLAIN, Size: 733 bytes --]

On Wed, 9 May 2007, Jeff Garzik wrote:
> Gerhard Mack wrote:
> > May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr
> > 0x1800000 action 0x2 frozen
> > May  9 14:51:35 mgerhard kernel: ata1.00: cmd
> > 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
> > May  9 14:51:35 mgerhard kernel:          res
> > 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
> > May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be
> > patient (Status 0xd0)
> > 
> > Anything I can do to figgure out what's causing this?
> 
> Provide full lspci, dmesg, kernel config?
> 
Done.

	Gerhard

--
Gerhard Mack

gmack@innerfire.net

<>< As a computer I find your faith in technology amusing.

[-- Attachment #2: Type: TEXT/PLAIN, Size: 2200 bytes --]

00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
04:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)

[-- Attachment #3: Type: TEXT/PLAIN, Size: 21962 bytes --]

Linux version 2.6.21.1 (root@mgerhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Wed May 2 20:08:35 EDT 2007
Command line: root=/dev/sda3 ro 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003def0000 (usable)
 BIOS-e820: 000000003def0000 - 000000003def3000 (ACPI NVS)
 BIOS-e820: 000000003def3000 - 000000003df00000 (ACPI data)
 BIOS-e820: 000000003e000000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 253680) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F7560, 0024 (r2 Nvidia)
ACPI: XSDT 3DEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: FACP 3DEFB3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: DSDT 3DEF3240, 8102 (r1 NVIDIA ASUSACPI     1000 MSFT  100000E)
ACPI: FACS 3DEF0000, 0040
ACPI: SSDT 3DEFB5C0, 0206 (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: HPET 3DEFB840, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
ACPI: MCFG 3DEFB8C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: APIC 3DEFB500, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 253680) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   253680
On node 0 totalpages: 253583
  DMA zone: 56 pages used for memmap
  DMA zone: 1799 pages reserved
  DMA zone: 2144 pages, LIFO batch:0
  DMA32 zone: 3412 pages used for memmap
  DMA32 zone: 246172 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfefff000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PERCPU: Allocating 33600 bytes of per cpu data
Built 1 zonelists.  Total pages: 248316
Kernel command line: root=/dev/sda3 ro 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 2204.596 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ f094000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 991332k/1014720k available (3881k kernel code, 22760k reserved, 2458k data, 256k init)
Calibrating delay using timer specific routine.. 4412.06 BogoMIPS (lpj=2206030)
Security Framework v1.0.0 initialized
Capability LSM initialized
Failure registering Root Plug module with the kernel
Failure registering Root Plug  module with primary security module.
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12526116
Detected 12.526 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4409.30 BogoMIPS (lpj=2204651)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Brought up 2 CPUs
migration_cost=370
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: No mmconfig possible on device 00:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:05.0
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
pnp: 00:01: ioport range 0x4000-0x407f has been reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: 00:01: ioport range 0x2000-0x207f has been reserved
pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
pnp: 00:01: iomem range 0x3e000000-0x3fffffff could not be reserved
pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0b: iomem range 0xcec00-0xcffff has been reserved
pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
Time: hpet clocksource has been installed.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdbff000-fdbff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:02.0
  IO window: a000-afff
  MEM window: fd800000-fd8fffff
  PREFETCH window: fd700000-fd7fffff
PCI: Bridge: 0000:00:03.0
  IO window: 8000-8fff
  MEM window: fde00000-fdefffff
  PREFETCH window: fdd00000-fddfffff
PCI: Bridge: 0000:00:04.0
  IO window: b000-bfff
  MEM window: fdc00000-fdcfffff
  PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:10.0
  IO window: 9000-9fff
  MEM window: fdb00000-fdbfffff
  PREFETCH window: fda00000-fdafffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie03]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie03]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfefff000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Linux video capture interface: v2.00
SCSI Media Changer driver v0.25 
sata_nv 0000:00:0e.0: version 3.3
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 22
ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 22
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD2500JS-60NCB1, 10.02E02, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi1 : sata_nv
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000101f761]
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000010977
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:0f.0 to 64
ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 21
ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 21
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x00000000000109e7
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000010967
pata_amd 0000:00:0d.0: version 0.2.8
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f400 irq 14
ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f408 irq 15
scsi4 : pata_amd
ata5.00: ATAPI, max UDMA/33
ata5.00: configured for UDMA/33
scsi5 : pata_amd
ATA: abnormal status 0x7F on port 0x0000000000010177
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 20, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
usb 2-4: new low speed USB device using ohci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver catc
drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver zaurus
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input3
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:05 failed with error -16
i2c /dev entries driver
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
input: AT Translated Set 2 keyboard as /class/input/input4
it87: Found IT8716F chip at 0x290, revision 0
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:10.1 to 64
ALSA device list:
  #0: HDA NVidia at 0xfe024000 irq 22
netem: version 1.2
u32 classifier
    Performance counters on
    OLD policer on 
nf_conntrack version 0.5.0 (3963 buckets, 31704 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 256k freed
Adding 1004052k swap on /dev/sda2.  Priority:-1 extents:1 across:1004052k
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi removable disk sdb
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi removable disk sdc
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: Attached scsi removable disk sdd
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: Attached scsi removable disk sde
sd 6:0:0:3: Attached scsi generic sg5 type 0
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
eth0: no IPv6 routers present

[-- Attachment #4: Type: TEXT/PLAIN, Size: 78769 bytes --]

May  7 21:28:25 mgerhard kernel: usb 2-3: new full speed USB device using ohci_hcd and address 3
May  7 21:28:26 mgerhard kernel: usb 2-3: configuration #1 chosen from 1 choice
May  7 21:28:26 mgerhard kernel: cdc_acm 2-3:1.0: ttyACM0: USB ACM device
May  7 21:28:26 mgerhard kernel: usbcore: registered new interface driver cdc_acm
May  7 21:28:26 mgerhard kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
May  7 21:28:30 mgerhard kernel: usb 1-6: usbfs: interface 0 claimed by usb-storage while 'python' sets config #1
May  7 21:28:30 mgerhard kernel: usb 2-3: usbfs: interface 0 claimed by cdc_acm while 'python' sets config #1
May  7 23:19:10 mgerhard kernel: usb 2-3: USB disconnect, address 3
May  9 09:22:06 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 09:22:06 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 09:22:06 mgerhard kernel: ata1.00: cmd 35/00:00:f0:fb:02/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 09:22:06 mgerhard kernel:          res 51/84:30:c0:ff:02/84:00:06:00:00/e0 Emask 0x10 (ATA bus error)
May  9 09:22:06 mgerhard kernel: ata1: soft resetting port
May  9 09:22:06 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 09:22:06 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 09:22:06 mgerhard kernel: ata1: EH complete
May  9 09:22:06 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 09:22:06 mgerhard kernel: sda: Write Protect is off
May  9 09:22:06 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 09:22:06 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 09:22:11 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 09:22:11 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 09:22:11 mgerhard kernel: ata1.00: cmd 35/00:00:38:95:0d/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 09:22:11 mgerhard kernel:          res 51/84:c0:78:95:0d/84:03:06:00:00/e0 Emask 0x10 (ATA bus error)
May  9 09:22:12 mgerhard kernel: ata1: soft resetting port
May  9 09:22:12 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 09:22:12 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 09:22:12 mgerhard kernel: ata1: EH complete
May  9 09:22:12 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 09:22:12 mgerhard kernel: sda: Write Protect is off
May  9 09:22:12 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 09:22:12 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 13:09:58 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 13:09:58 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 13:09:58 mgerhard kernel: ata1.00: cmd 35/00:00:e8:f9:23/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 13:09:58 mgerhard kernel:          res 51/84:10:d8:fd:23/84:00:00:00:00/e0 Emask 0x10 (ATA bus error)
May  9 13:09:58 mgerhard kernel: ata1: soft resetting port
May  9 13:09:58 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 13:09:58 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 13:09:58 mgerhard kernel: ata1: EH complete
May  9 13:09:58 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 13:09:58 mgerhard kernel: sda: Write Protect is off
May  9 13:09:58 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 13:09:58 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 13:10:03 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 13:10:04 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 13:10:04 mgerhard kernel: ata1.00: cmd 35/00:00:18:f5:17/00:04:13:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 13:10:04 mgerhard kernel:          res 51/84:70:a8:f7:17/84:01:13:00:00/e0 Emask 0x10 (ATA bus error)
May  9 13:10:04 mgerhard kernel: ata1: soft resetting port
May  9 13:10:04 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 13:10:04 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 13:10:04 mgerhard kernel: ata1: EH complete
May  9 13:10:04 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 13:10:04 mgerhard kernel: sda: Write Protect is off
May  9 13:10:04 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 13:10:04 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 13:10:04 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 13:10:04 mgerhard kernel: ata1.00: cmd 35/00:00:40:00:18/00:04:13:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 13:10:04 mgerhard kernel:          res 51/84:a0:a0:00:18/84:03:13:00:00/e0 Emask 0x10 (ATA bus error)
May  9 13:10:04 mgerhard kernel: ata1: soft resetting port
May  9 13:10:04 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 13:10:04 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 13:10:04 mgerhard kernel: ata1: EH complete
May  9 13:10:04 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 13:10:04 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 13:10:04 mgerhard kernel: sda: Write Protect is off
May  9 13:10:04 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 13:10:04 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:13:22 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:13:22 mgerhard kernel: ata1.00: cmd 35/00:00:78:12:69/00:04:03:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:13:22 mgerhard kernel:          res 40/00:a0:a0:00:18/84:03:13:00:00/e0 Emask 0x4 (timeout)
May  9 14:13:29 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:13:52 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:13:52 mgerhard kernel: ata1: soft resetting port
May  9 14:13:52 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:13:52 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:13:52 mgerhard kernel: ata1: EH complete
May  9 14:13:52 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:13:52 mgerhard kernel: sda: Write Protect is off
May  9 14:13:52 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:13:52 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:14:24 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen
May  9 14:14:24 mgerhard kernel: ata1.00: cmd 35/00:08:c8:c2:2f/00:02:08:00:00/e0 tag 0 cdb 0x0 data 266240 out
May  9 14:14:24 mgerhard kernel:          res 40/00:a0:a0:00:18/84:03:13:00:00/e0 Emask 0x4 (timeout)
May  9 14:14:31 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:14:54 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:14:54 mgerhard kernel: ata1: soft resetting port
May  9 14:14:54 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:14:54 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:14:54 mgerhard kernel: ata1: EH complete
May  9 14:14:54 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:14:54 mgerhard kernel: sda: Write Protect is off
May  9 14:14:54 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:14:54 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:14:59 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:14:59 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:14:59 mgerhard kernel: ata1.00: cmd 35/00:00:10:69:3b/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:14:59 mgerhard kernel:          res 51/84:01:0f:6b:3b/84:02:08:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:15:00 mgerhard kernel: ata1: soft resetting port
May  9 14:15:00 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:15:00 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:15:00 mgerhard kernel: ata1: EH complete
May  9 14:15:00 mgerhard kernel: ata1.00: limiting speed to UDMA/66:PIO4
May  9 14:15:00 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:15:00 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:15:00 mgerhard kernel: ata1.00: cmd 35/00:00:10:69:3b/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:15:00 mgerhard kernel:          res 51/84:10:00:6d:3b/84:00:08:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:15:00 mgerhard kernel: ata1: soft resetting port
May  9 14:15:00 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:15:00 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:15:00 mgerhard kernel: ata1: EH complete
May  9 14:15:00 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:15:00 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:15:00 mgerhard kernel: ata1.00: cmd 35/00:40:10:6d:3b/00:03:08:00:00/e0 tag 0 cdb 0x0 data 425984 out
May  9 14:15:00 mgerhard kernel:          res 51/84:d0:80:6e:3b/84:01:08:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:15:01 mgerhard kernel: ata1: soft resetting port
May  9 14:15:01 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:15:01 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:15:01 mgerhard kernel: ata1: EH complete
May  9 14:15:01 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:15:01 mgerhard kernel: sda: Write Protect is off
May  9 14:15:01 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:15:01 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:15:01 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:15:01 mgerhard kernel: ata1.00: cmd 35/00:00:18:db:41/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:15:01 mgerhard kernel:          res 51/84:61:b7:dd:41/84:01:06:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:15:01 mgerhard kernel: ata1: soft resetting port
May  9 14:15:01 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:15:01 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:15:01 mgerhard kernel: ata1: EH complete
May  9 14:15:31 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:15:31 mgerhard kernel: ata1.00: cmd 35/00:00:18:db:41/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:15:31 mgerhard kernel:          res 40/00:61:b7:dd:41/84:01:06:00:00/e0 Emask 0x4 (timeout)
May  9 14:15:38 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:16:01 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:16:01 mgerhard kernel: ata1: soft resetting port
May  9 14:16:02 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:16:02 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:16:02 mgerhard kernel: ata1: EH complete
May  9 14:16:02 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:16:02 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:16:02 mgerhard kernel: sda: Write Protect is off
May  9 14:16:02 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:16:02 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:33:27 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:33:27 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:33:27 mgerhard kernel: ata1.00: cmd 35/00:d8:10:e2:1f/00:03:0b:00:00/e0 tag 0 cdb 0x0 data 503808 out
May  9 14:33:27 mgerhard kernel:          res 51/84:78:70:e5:1f/84:00:0b:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:33:27 mgerhard kernel: ata1: soft resetting port
May  9 14:33:27 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:33:27 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:33:27 mgerhard kernel: ata1: EH complete
May  9 14:33:27 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:33:57 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:33:57 mgerhard kernel: ata1.00: cmd 35/00:00:18:17:69/00:04:03:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:33:57 mgerhard kernel:          res 40/00:78:70:e5:1f/84:00:0b:00:00/e0 Emask 0x4 (timeout)
May  9 14:34:05 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:34:28 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:34:28 mgerhard kernel: ata1: soft resetting port
May  9 14:34:28 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:34:28 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:34:28 mgerhard kernel: ata1: EH complete
May  9 14:34:28 mgerhard kernel: sda: Write Protect is off
May  9 14:34:28 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:34:28 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:34:28 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:34:28 mgerhard kernel: sda: Write Protect is off
May  9 14:34:28 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:34:28 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:38:14 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:38:14 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:38:14 mgerhard kernel: ata1.00: cmd 35/00:80:68:34:c8/00:03:09:00:00/e0 tag 0 cdb 0x0 data 458752 out
May  9 14:38:14 mgerhard kernel:          res 51/84:40:a8:37:c8/84:00:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:38:14 mgerhard kernel: ata1: soft resetting port
May  9 14:38:14 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:38:14 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:38:14 mgerhard kernel: ata1: EH complete
May  9 14:38:44 mgerhard kernel: ata1.00: limiting speed to UDMA/33:PIO4
May  9 14:38:44 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:38:44 mgerhard kernel: ata1.00: cmd 35/00:80:68:34:c8/00:03:09:00:00/e0 tag 0 cdb 0x0 data 458752 out
May  9 14:38:44 mgerhard kernel:          res 40/00:40:a8:37:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:38:52 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:39:15 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:39:15 mgerhard kernel: ata1: soft resetting port
May  9 14:39:15 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:39:15 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:39:15 mgerhard kernel: ata1: EH complete
May  9 14:39:15 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:39:15 mgerhard kernel: sda: Write Protect is off
May  9 14:39:15 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:39:15 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:39:15 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:39:15 mgerhard kernel: sda: Write Protect is off
May  9 14:39:15 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:39:15 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:39:50 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:39:50 mgerhard kernel: ata1.00: cmd 35/00:00:a0:42:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:39:50 mgerhard kernel:          res 40/00:40:a8:37:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:43:07 mgerhard kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
May  9 14:43:07 mgerhard kernel: Linux version 2.6.21.1 (root@mgerhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Wed May 2 20:08:35 EDT 2007
May  9 14:43:07 mgerhard kernel: Command line: root=/dev/sda3 ro 
May  9 14:43:07 mgerhard kernel: BIOS-provided physical RAM map:
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 0000000000100000 - 000000003def0000 (usable)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 000000003def0000 - 000000003def3000 (ACPI NVS)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 000000003def3000 - 000000003df00000 (ACPI data)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 000000003e000000 - 0000000040000000 (reserved)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
May  9 14:43:07 mgerhard kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
May  9 14:43:07 mgerhard kernel: Entering add_active_range(0, 0, 159) 0 entries of 256 used
May  9 14:43:07 mgerhard kernel: Entering add_active_range(0, 256, 253680) 1 entries of 256 used
May  9 14:43:07 mgerhard kernel: end_pfn_map = 1048576
May  9 14:43:07 mgerhard kernel: DMI 2.4 present.
May  9 14:43:07 mgerhard kernel: ACPI: RSDP 000F7560, 0024 (r2 Nvidia)
May  9 14:43:07 mgerhard kernel: ACPI: XSDT 3DEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
May  9 14:43:07 mgerhard kernel: ACPI: FACP 3DEFB3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
May  9 14:43:07 mgerhard kernel: ACPI: DSDT 3DEF3240, 8102 (r1 NVIDIA ASUSACPI     1000 MSFT  100000E)
May  9 14:43:07 mgerhard kernel: ACPI: FACS 3DEF0000, 0040
May  9 14:43:07 mgerhard kernel: ACPI: SSDT 3DEFB5C0, 0206 (r1 PTLTD  POWERNOW        1  LTP        1)
May  9 14:43:07 mgerhard kernel: ACPI: HPET 3DEFB840, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
May  9 14:43:07 mgerhard kernel: ACPI: MCFG 3DEFB8C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
May  9 14:43:07 mgerhard kernel: ACPI: APIC 3DEFB500, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
May  9 14:43:07 mgerhard kernel: Entering add_active_range(0, 0, 159) 0 entries of 256 used
May  9 14:43:07 mgerhard kernel: Entering add_active_range(0, 256, 253680) 1 entries of 256 used
May  9 14:43:07 mgerhard kernel: Zone PFN ranges:
May  9 14:43:07 mgerhard kernel:   DMA             0 ->     4096
May  9 14:43:07 mgerhard kernel:   DMA32        4096 ->  1048576
May  9 14:43:07 mgerhard kernel:   Normal    1048576 ->  1048576
May  9 14:43:07 mgerhard kernel: early_node_map[2] active PFN ranges
May  9 14:43:07 mgerhard kernel:     0:        0 ->      159
May  9 14:43:07 mgerhard kernel:     0:      256 ->   253680
May  9 14:43:07 mgerhard kernel: On node 0 totalpages: 253583
May  9 14:43:07 mgerhard kernel:   DMA zone: 56 pages used for memmap
May  9 14:43:07 mgerhard kernel:   DMA zone: 1799 pages reserved
May  9 14:43:07 mgerhard kernel:   DMA zone: 2144 pages, LIFO batch:0
May  9 14:43:07 mgerhard kernel:   DMA32 zone: 3412 pages used for memmap
May  9 14:43:07 mgerhard kernel:   DMA32 zone: 246172 pages, LIFO batch:31
May  9 14:43:07 mgerhard kernel:   Normal zone: 0 pages used for memmap
May  9 14:43:07 mgerhard kernel: ACPI: PM-Timer IO Port: 0x4008
May  9 14:43:07 mgerhard kernel: ACPI: Local APIC address 0xfee00000
May  9 14:43:07 mgerhard kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May  9 14:43:07 mgerhard kernel: Processor #0 (Bootup-CPU)
May  9 14:43:07 mgerhard kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
May  9 14:43:07 mgerhard kernel: Processor #1
May  9 14:43:07 mgerhard kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
May  9 14:43:07 mgerhard kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
May  9 14:43:07 mgerhard kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May  9 14:43:07 mgerhard kernel: IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
May  9 14:43:07 mgerhard kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May  9 14:43:07 mgerhard kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May  9 14:43:07 mgerhard kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
May  9 14:43:07 mgerhard kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
May  9 14:43:07 mgerhard kernel: ACPI: IRQ0 used by override.
May  9 14:43:07 mgerhard kernel: ACPI: IRQ2 used by override.
May  9 14:43:07 mgerhard kernel: ACPI: IRQ9 used by override.
May  9 14:43:07 mgerhard kernel: ACPI: IRQ14 used by override.
May  9 14:43:07 mgerhard kernel: ACPI: IRQ15 used by override.
May  9 14:43:07 mgerhard kernel: Setting APIC routing to flat
May  9 14:43:07 mgerhard kernel: ACPI: HPET id: 0x10de8201 base: 0xfefff000
May  9 14:43:07 mgerhard kernel: Using ACPI (MADT) for SMP configuration information
May  9 14:43:07 mgerhard kernel: Nosave address range: 000000000009f000 - 00000000000a0000
May  9 14:43:07 mgerhard kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
May  9 14:43:07 mgerhard kernel: Nosave address range: 00000000000f0000 - 0000000000100000
May  9 14:43:07 mgerhard kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
May  9 14:43:07 mgerhard kernel: PERCPU: Allocating 33600 bytes of per cpu data
May  9 14:43:07 mgerhard kernel: Built 1 zonelists.  Total pages: 248316
May  9 14:43:07 mgerhard kernel: Kernel command line: root=/dev/sda3 ro 
May  9 14:43:07 mgerhard kernel: Initializing CPU#0
May  9 14:43:07 mgerhard kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
May  9 14:43:07 mgerhard kernel: Extended CMOS year: 2000
May  9 14:43:07 mgerhard kernel: time.c: Detected 2204.598 MHz processor.
May  9 14:43:07 mgerhard kernel: Console: colour VGA+ 80x25
May  9 14:43:07 mgerhard kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
May  9 14:43:07 mgerhard kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
May  9 14:43:07 mgerhard kernel: Checking aperture...
May  9 14:43:07 mgerhard kernel: CPU 0: aperture @ f29c000000 size 32 MB
May  9 14:43:07 mgerhard kernel: Aperture too small (32 MB)
May  9 14:43:07 mgerhard kernel: No AGP bridge found
May  9 14:43:07 mgerhard kernel: Memory: 991332k/1014720k available (3881k kernel code, 22760k reserved, 2458k data, 256k init)
May  9 14:43:07 mgerhard kernel: Calibrating delay using timer specific routine.. 4412.07 BogoMIPS (lpj=2206035)
May  9 14:43:07 mgerhard kernel: Security Framework v1.0.0 initialized
May  9 14:43:07 mgerhard kernel: Capability LSM initialized
May  9 14:43:07 mgerhard kernel: Failure registering Root Plug module with the kernel
May  9 14:43:07 mgerhard kernel: Failure registering Root Plug  module with primary security module.
May  9 14:43:07 mgerhard kernel: Mount-cache hash table entries: 256
May  9 14:43:07 mgerhard kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May  9 14:43:07 mgerhard kernel: CPU: L2 Cache: 512K (64 bytes/line)
May  9 14:43:07 mgerhard kernel: CPU: Physical Processor ID: 0
May  9 14:43:07 mgerhard kernel: CPU: Processor Core ID: 0
May  9 14:43:07 mgerhard kernel: Freeing SMP alternatives: 36k freed
May  9 14:43:07 mgerhard kernel: ACPI: Core revision 20070126
May  9 14:43:07 mgerhard kernel: Using local APIC timer interrupts.
May  9 14:43:07 mgerhard kernel: result 12526124
May  9 14:43:07 mgerhard kernel: Detected 12.526 MHz APIC timer.
May  9 14:43:07 mgerhard kernel: Booting processor 1/2 APIC 0x1
May  9 14:43:07 mgerhard kernel: Initializing CPU#1
May  9 14:43:07 mgerhard kernel: Calibrating delay using timer specific routine.. 4409.16 BogoMIPS (lpj=2204584)
May  9 14:43:07 mgerhard kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May  9 14:43:07 mgerhard kernel: CPU: L2 Cache: 512K (64 bytes/line)
May  9 14:43:07 mgerhard kernel: CPU: Physical Processor ID: 0
May  9 14:43:07 mgerhard kernel: CPU: Processor Core ID: 1
May  9 14:43:07 mgerhard kernel: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
May  9 14:43:07 mgerhard kernel: Brought up 2 CPUs
May  9 14:43:07 mgerhard kernel: migration_cost=370
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 16
May  9 14:43:07 mgerhard kernel: ACPI: bus type pci registered
May  9 14:43:07 mgerhard kernel: PCI: Using MMCONFIG at e0000000 - efffffff
May  9 14:43:07 mgerhard kernel: PCI: No mmconfig possible on device 00:18
May  9 14:43:07 mgerhard kernel: ACPI: Interpreter enabled
May  9 14:43:07 mgerhard kernel: ACPI: Using IOAPIC for interrupt routing
May  9 14:43:07 mgerhard kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
May  9 14:43:07 mgerhard kernel: PCI: Probing PCI hardware (bus 00)
May  9 14:43:07 mgerhard kernel: Boot video device is 0000:00:05.0
May  9 14:43:07 mgerhard kernel: PCI: Transparent bridge - 0000:00:10.0
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
May  9 14:43:07 mgerhard kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
May  9 14:43:07 mgerhard kernel: pnp: PnP ACPI init
May  9 14:43:07 mgerhard kernel: pnp: PnP ACPI: found 12 devices
May  9 14:43:07 mgerhard kernel: SCSI subsystem initialized
May  9 14:43:07 mgerhard kernel: libata version 2.20 loaded.
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver usbfs
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver hub
May  9 14:43:07 mgerhard kernel: usbcore: registered new device driver usb
May  9 14:43:07 mgerhard kernel: PCI: Using ACPI for IRQ routing
May  9 14:43:07 mgerhard kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
May  9 14:43:07 mgerhard kernel: NetLabel: Initializing
May  9 14:43:07 mgerhard kernel: NetLabel:  domain hash size = 128
May  9 14:43:07 mgerhard kernel: NetLabel:  protocols = UNLABELED CIPSOv4
May  9 14:43:07 mgerhard kernel: NetLabel:  unlabeled traffic allowed by default
May  9 14:43:07 mgerhard kernel: hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
May  9 14:43:07 mgerhard kernel: hpet0: 3 32-bit timers, 25000000 Hz
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x4000-0x407f has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x4400-0x447f has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x4800-0x487f has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x2000-0x207f has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:01: iomem range 0x3e000000-0x3fffffff could not be reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:0b: iomem range 0xcec00-0xcffff has been reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
May  9 14:43:07 mgerhard kernel: pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
May  9 14:43:07 mgerhard kernel: Time: hpet clocksource has been installed.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
May  9 14:43:07 mgerhard kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdbff000-fdbff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
May  9 14:43:07 mgerhard kernel: PCI: Bridge: 0000:00:02.0
May  9 14:43:07 mgerhard kernel:   IO window: a000-afff
May  9 14:43:07 mgerhard kernel:   MEM window: fd800000-fd8fffff
May  9 14:43:07 mgerhard kernel:   PREFETCH window: fd700000-fd7fffff
May  9 14:43:07 mgerhard kernel: PCI: Bridge: 0000:00:03.0
May  9 14:43:07 mgerhard kernel:   IO window: 8000-8fff
May  9 14:43:07 mgerhard kernel:   MEM window: fde00000-fdefffff
May  9 14:43:07 mgerhard kernel:   PREFETCH window: fdd00000-fddfffff
May  9 14:43:07 mgerhard kernel: PCI: Bridge: 0000:00:04.0
May  9 14:43:07 mgerhard kernel:   IO window: b000-bfff
May  9 14:43:07 mgerhard kernel:   MEM window: fdc00000-fdcfffff
May  9 14:43:07 mgerhard kernel:   PREFETCH window: fd900000-fd9fffff
May  9 14:43:07 mgerhard kernel: PCI: Bridge: 0000:00:10.0
May  9 14:43:07 mgerhard kernel:   IO window: 9000-9fff
May  9 14:43:07 mgerhard kernel:   MEM window: fdb00000-fdbfffff
May  9 14:43:07 mgerhard kernel:   PREFETCH window: fda00000-fdafffff
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:03.0 to 64
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:10.0 to 64
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 2
May  9 14:43:07 mgerhard kernel: IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
May  9 14:43:07 mgerhard kernel: TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
May  9 14:43:07 mgerhard kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
May  9 14:43:07 mgerhard kernel: TCP: Hash tables configured (established 131072 bind 65536)
May  9 14:43:07 mgerhard kernel: TCP reno registered
May  9 14:43:07 mgerhard kernel: VFS: Disk quotas dquot_6.5.1
May  9 14:43:07 mgerhard kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May  9 14:43:07 mgerhard kernel: fuse init (API version 7.8)
May  9 14:43:07 mgerhard kernel: io scheduler noop registered
May  9 14:43:07 mgerhard kernel: io scheduler anticipatory registered (default)
May  9 14:43:07 mgerhard kernel: io scheduler deadline registered
May  9 14:43:07 mgerhard kernel: io scheduler cfq registered
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
May  9 14:43:07 mgerhard kernel: assign_interrupt_mode Found MSI capability
May  9 14:43:07 mgerhard kernel: Allocate Port Service[0000:00:02.0:pcie00]
May  9 14:43:07 mgerhard kernel: Allocate Port Service[0000:00:02.0:pcie03]
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:03.0 to 64
May  9 14:43:07 mgerhard kernel: assign_interrupt_mode Found MSI capability
May  9 14:43:07 mgerhard kernel: Allocate Port Service[0000:00:03.0:pcie00]
May  9 14:43:07 mgerhard kernel: Allocate Port Service[0000:00:03.0:pcie03]
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64
May  9 14:43:07 mgerhard kernel: assign_interrupt_mode Found MSI capability
May  9 14:43:07 mgerhard kernel: Allocate Port Service[0000:00:04.0:pcie00]
May  9 14:43:07 mgerhard kernel: Allocate Port Service[0000:00:04.0:pcie03]
May  9 14:43:07 mgerhard kernel: input: Power Button (FF) as /class/input/input0
May  9 14:43:07 mgerhard kernel: ACPI: Power Button (FF) [PWRF]
May  9 14:43:07 mgerhard kernel: input: Power Button (CM) as /class/input/input1
May  9 14:43:07 mgerhard kernel: ACPI: Power Button (CM) [PWRB]
May  9 14:43:07 mgerhard kernel: ACPI: Fan [FAN] (on)
May  9 14:43:07 mgerhard kernel: ACPI: Thermal Zone [THRM] (40 C)
May  9 14:43:07 mgerhard kernel: Real Time Clock Driver v1.12ac
May  9 14:43:07 mgerhard kernel: hpet_resources: 0xfefff000 is busy
May  9 14:43:07 mgerhard kernel: Non-volatile memory driver v1.2
May  9 14:43:07 mgerhard kernel: Linux agpgart interface v0.102 (c) Dave Jones
May  9 14:43:07 mgerhard kernel: [drm] Initialized drm 1.1.0 20060810
May  9 14:43:07 mgerhard kernel: Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
May  9 14:43:07 mgerhard kernel: Hangcheck: Using get_cycles().
May  9 14:43:07 mgerhard kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
May  9 14:43:07 mgerhard kernel: Floppy drive(s): fd0 is 1.44M
May  9 14:43:07 mgerhard kernel: FDC 0 is a post-1991 82077
May  9 14:43:07 mgerhard kernel: loop: loaded (max 8 devices)
May  9 14:43:07 mgerhard kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:14.0 to 64
May  9 14:43:07 mgerhard kernel: forcedeth: using HIGHDMA
May  9 14:43:07 mgerhard kernel: eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0
May  9 14:43:07 mgerhard kernel: PPP generic driver version 2.4.2
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 24
May  9 14:43:07 mgerhard kernel: Linux video capture interface: v2.00
May  9 14:43:07 mgerhard kernel: SCSI Media Changer driver v0.25 
May  9 14:43:07 mgerhard kernel: sata_nv 0000:00:0e.0: version 3.3
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:0e.0 to 64
May  9 14:43:07 mgerhard kernel: ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 22
May  9 14:43:07 mgerhard kernel: ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 22
May  9 14:43:07 mgerhard kernel: scsi0 : sata_nv
May  9 14:43:07 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:43:07 mgerhard kernel: ata1.00: ATA-7: WDC WD2500JS-60NCB1, 10.02E02, max UDMA/100
May  9 14:43:07 mgerhard kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
May  9 14:43:07 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:43:07 mgerhard kernel: scsi1 : sata_nv
May  9 14:43:07 mgerhard kernel: ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000101f761]
May  9 14:43:07 mgerhard kernel: ata2: SATA link down (SStatus 0 SControl 300)
May  9 14:43:07 mgerhard kernel: ATA: abnormal status 0x7F on port 0x0000000000010977
May  9 14:43:07 mgerhard kernel: scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5
May  9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:43:07 mgerhard kernel: sda: Write Protect is off
May  9 14:43:07 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:43:07 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:43:07 mgerhard kernel: sda: Write Protect is off
May  9 14:43:07 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:43:07 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:43:07 mgerhard kernel:  sda: sda1 sda2 sda3
May  9 14:43:07 mgerhard kernel: sd 0:0:0:0: Attached scsi disk sda
May  9 14:43:07 mgerhard kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:0f.0 to 64
May  9 14:43:07 mgerhard kernel: ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 21
May  9 14:43:07 mgerhard kernel: ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 21
May  9 14:43:07 mgerhard kernel: scsi2 : sata_nv
May  9 14:43:07 mgerhard kernel: ata3: SATA link down (SStatus 0 SControl 300)
May  9 14:43:07 mgerhard kernel: ATA: abnormal status 0x7F on port 0x00000000000109e7
May  9 14:43:07 mgerhard kernel: scsi3 : sata_nv
May  9 14:43:07 mgerhard kernel: ata4: SATA link down (SStatus 0 SControl 300)
May  9 14:43:07 mgerhard kernel: ATA: abnormal status 0x7F on port 0x0000000000010967
May  9 14:43:07 mgerhard kernel: pata_amd 0000:00:0d.0: version 0.2.8
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:0d.0 to 64
May  9 14:43:07 mgerhard kernel: ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f400 irq 14
May  9 14:43:07 mgerhard kernel: ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f408 irq 15
May  9 14:43:07 mgerhard kernel: scsi4 : pata_amd
May  9 14:43:07 mgerhard kernel: ata5.00: ATAPI, max UDMA/33
May  9 14:43:07 mgerhard kernel: ata5.00: configured for UDMA/33
May  9 14:43:07 mgerhard kernel: scsi5 : pata_amd
May  9 14:43:07 mgerhard kernel: ATA: abnormal status 0x7F on port 0x0000000000010177
May  9 14:43:07 mgerhard kernel: scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
May  9 14:43:07 mgerhard kernel: sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
May  9 14:43:07 mgerhard kernel: Uniform CD-ROM driver Revision: 3.20
May  9 14:43:07 mgerhard kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0
May  9 14:43:07 mgerhard kernel: sr 4:0:0:0: Attached scsi generic sg1 type 5
May  9 14:43:07 mgerhard kernel: video1394: Installed video1394 module
May  9 14:43:07 mgerhard kernel: ieee1394: raw1394: /dev/raw1394 device initialized
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:0b.1 to 64
May  9 14:43:07 mgerhard kernel: ehci_hcd 0000:00:0b.1: EHCI Host Controller
May  9 14:43:07 mgerhard kernel: ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
May  9 14:43:07 mgerhard kernel: ehci_hcd 0000:00:0b.1: debug port 1
May  9 14:43:07 mgerhard kernel: PCI: cache line size of 64 is not supported by device 0000:00:0b.1
May  9 14:43:07 mgerhard kernel: ehci_hcd 0000:00:0b.1: irq 20, io mem 0xfe02e000
May  9 14:43:07 mgerhard kernel: ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May  9 14:43:07 mgerhard kernel: usb usb1: configuration #1 chosen from 1 choice
May  9 14:43:07 mgerhard kernel: hub 1-0:1.0: USB hub found
May  9 14:43:07 mgerhard kernel: hub 1-0:1.0: 8 ports detected
May  9 14:43:07 mgerhard kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:0b.0 to 64
May  9 14:43:07 mgerhard kernel: ohci_hcd 0000:00:0b.0: OHCI Host Controller
May  9 14:43:07 mgerhard kernel: ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
May  9 14:43:07 mgerhard kernel: ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
May  9 14:43:07 mgerhard kernel: usb usb2: configuration #1 chosen from 1 choice
May  9 14:43:07 mgerhard kernel: hub 2-0:1.0: USB hub found
May  9 14:43:07 mgerhard kernel: hub 2-0:1.0: 8 ports detected
May  9 14:43:07 mgerhard kernel: Initializing USB Mass Storage driver...
May  9 14:43:07 mgerhard kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
May  9 14:43:07 mgerhard kernel: usb 1-6: configuration #1 chosen from 1 choice
May  9 14:43:07 mgerhard kernel: usb 2-4: new low speed USB device using ohci_hcd and address 2
May  9 14:43:07 mgerhard kernel: usb 2-4: configuration #1 chosen from 1 choice
May  9 14:43:07 mgerhard kernel: scsi6 : SCSI emulation for USB Mass Storage devices
May  9 14:43:07 mgerhard kernel: usb-storage: device found at 3
May  9 14:43:07 mgerhard kernel: usb-storage: waiting for device to settle before scanning
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver usb-storage
May  9 14:43:07 mgerhard kernel: USB Mass Storage support registered.
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver hiddev
May  9 14:43:07 mgerhard kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
May  9 14:43:07 mgerhard kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-4
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver usbhid
May  9 14:43:07 mgerhard kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver catc
May  9 14:43:07 mgerhard kernel: drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver kaweth
May  9 14:43:07 mgerhard kernel: pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver pegasus
May  9 14:43:07 mgerhard kernel: drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver rtl8150
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver asix
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver cdc_ether
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver net1080
May  9 14:43:07 mgerhard kernel: usbcore: registered new interface driver zaurus
May  9 14:43:07 mgerhard kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
May  9 14:43:07 mgerhard kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
May  9 14:43:07 mgerhard kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May  9 14:43:07 mgerhard kernel: mice: PS/2 mouse device common for all mice
May  9 14:43:07 mgerhard kernel: input: PC Speaker as /class/input/input3
May  9 14:43:07 mgerhard kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
May  9 14:43:07 mgerhard kernel: rtc_cmos: probe of 00:05 failed with error -16
May  9 14:43:07 mgerhard kernel: i2c /dev entries driver
May  9 14:43:07 mgerhard kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
May  9 14:43:07 mgerhard kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
May  9 14:43:07 mgerhard kernel: input: AT Translated Set 2 keyboard as /class/input/input4
May  9 14:43:07 mgerhard kernel: it87: Found IT8716F chip at 0x290, revision 0
May  9 14:43:07 mgerhard kernel: it87: in3 is VCC (+5V)
May  9 14:43:07 mgerhard kernel: it87: in7 is VCCH (+5V Stand-By)
May  9 14:43:07 mgerhard kernel: it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
May  9 14:43:07 mgerhard kernel: Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
May  9 14:43:07 mgerhard kernel: ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
May  9 14:43:07 mgerhard kernel: PCI: Setting latency timer of device 0000:00:10.1 to 64
May  9 14:43:07 mgerhard kernel: ALSA device list:
May  9 14:43:07 mgerhard kernel:   #0: HDA NVidia at 0xfe024000 irq 22
May  9 14:43:07 mgerhard kernel: netem: version 1.2
May  9 14:43:07 mgerhard kernel: u32 classifier
May  9 14:43:07 mgerhard kernel:     Performance counters on
May  9 14:43:07 mgerhard kernel:     OLD policer on 
May  9 14:43:07 mgerhard kernel: nf_conntrack version 0.5.0 (3963 buckets, 31704 max)
May  9 14:43:07 mgerhard kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
May  9 14:43:07 mgerhard kernel: ClusterIP Version 0.8 loaded successfully
May  9 14:43:07 mgerhard kernel: arp_tables: (C) 2002 David S. Miller
May  9 14:43:07 mgerhard kernel: TCP cubic registered
May  9 14:43:07 mgerhard kernel: Initializing XFRM netlink socket
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 1
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 10
May  9 14:43:07 mgerhard kernel: IPv6 over IPv4 tunneling driver
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 17
May  9 14:43:07 mgerhard kernel: NET: Registered protocol family 15
May  9 14:43:07 mgerhard kernel: powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
May  9 14:43:07 mgerhard kernel: powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
May  9 14:43:07 mgerhard kernel: powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
May  9 14:43:07 mgerhard kernel: powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
May  9 14:43:07 mgerhard kernel: powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
May  9 14:43:07 mgerhard kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
May  9 14:43:07 mgerhard kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: found reiserfs format "3.6" with standard journal
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: using ordered data mode
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: checking transaction log (sda3)
May  9 14:43:07 mgerhard kernel: usb-storage: device scan complete
May  9 14:43:07 mgerhard kernel: scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
May  9 14:43:07 mgerhard kernel: scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
May  9 14:43:07 mgerhard kernel: scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
May  9 14:43:07 mgerhard kernel: scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
May  9 14:43:07 mgerhard kernel: sd 6:0:0:0: Attached scsi removable disk sdb
May  9 14:43:07 mgerhard kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
May  9 14:43:07 mgerhard kernel: sd 6:0:0:1: Attached scsi removable disk sdc
May  9 14:43:07 mgerhard kernel: sd 6:0:0:1: Attached scsi generic sg3 type 0
May  9 14:43:07 mgerhard kernel: sd 6:0:0:2: Attached scsi removable disk sdd
May  9 14:43:07 mgerhard kernel: sd 6:0:0:2: Attached scsi generic sg4 type 0
May  9 14:43:07 mgerhard kernel: sd 6:0:0:3: Attached scsi removable disk sde
May  9 14:43:07 mgerhard kernel: sd 6:0:0:3: Attached scsi generic sg5 type 0
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: replayed 422 transactions in 12 seconds
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Using r5 hash to sort names
May  9 14:43:07 mgerhard kernel: VFS: Mounted root (reiserfs filesystem) readonly.
May  9 14:43:07 mgerhard kernel: Freeing unused kernel memory: 256k freed
May  9 14:43:07 mgerhard kernel: Adding 1004052k swap on /dev/sda2.  Priority:-1 extents:1 across:1004052k
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [100264 667528 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [100264 667523 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [100264 667509 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [100264 481967 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [68241 134111 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [342214 79436 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: Removing [68241 76140 0x0 SD]..done
May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: There were 7 uncompleted unlinks/truncates. Completed
May  9 14:43:07 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:43:07 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:43:07 mgerhard kernel: ata1.00: cmd 35/00:58:20:4d:23/00:01:00:00:00/e0 tag 0 cdb 0x0 data 176128 out
May  9 14:43:07 mgerhard kernel:          res 51/84:28:50:4d:23/84:01:00:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:43:07 mgerhard kernel: ata1: soft resetting port
May  9 14:43:07 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:43:07 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:43:07 mgerhard kernel: ata1: EH complete
May  9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:43:07 mgerhard kernel: sda: Write Protect is off
May  9 14:43:07 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:43:07 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:43:07 mgerhard kernel: ReiserFS: sda1: found reiserfs format "3.6" with standard journal
May  9 14:43:07 mgerhard kernel: ReiserFS: sda1: using ordered data mode
May  9 14:43:07 mgerhard kernel: ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
May  9 14:43:07 mgerhard kernel: ReiserFS: sda1: checking transaction log (sda1)
May  9 14:43:07 mgerhard kernel: ReiserFS: sda1: Using r5 hash to sort names
May  9 14:43:07 mgerhard kernel: eth0: no IPv6 routers present
May  9 14:43:17 mgerhard kernel: nvidia: module license 'NVIDIA' taints kernel.
May  9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
May  9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
May  9 14:43:17 mgerhard kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64
May  9 14:43:17 mgerhard kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  1.0-9746  Fri Dec 15 10:19:35 PST 2006
May  9 14:44:37 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:44:37 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:44:37 mgerhard kernel: ata1.00: cmd 35/00:00:b0:53:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:44:37 mgerhard kernel:          res 51/84:60:50:56:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:44:37 mgerhard kernel: ata1: soft resetting port
May  9 14:44:37 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:44:37 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:44:37 mgerhard kernel: ata1: EH complete
May  9 14:44:37 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:44:37 mgerhard kernel: sda: Write Protect is off
May  9 14:44:37 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:44:37 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:45:38 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen
May  9 14:45:38 mgerhard kernel: ata1.00: cmd 35/00:98:b8:92:23/00:02:00:00:00/e0 tag 0 cdb 0x0 data 339968 out
May  9 14:45:38 mgerhard kernel:          res 40/00:60:50:56:c8/84:01:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:45:38 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:45:38 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:45:38 mgerhard kernel: ata1: soft resetting port
May  9 14:45:38 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:45:38 mgerhard kernel: ata1.00: configured for UDMA/100
May  9 14:45:38 mgerhard kernel: ata1: EH complete
May  9 14:45:38 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:45:38 mgerhard kernel: sda: Write Protect is off
May  9 14:45:38 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:45:38 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:47:43 mgerhard kernel: ata1.00: limiting speed to UDMA/66:PIO4
May  9 14:47:43 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:47:43 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:47:43 mgerhard kernel: ata1.00: cmd 35/00:28:b8:99:1e/00:01:0b:00:00/e0 tag 0 cdb 0x0 data 151552 out
May  9 14:47:43 mgerhard kernel:          res 51/84:d8:08:9a:1e/84:00:0b:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:47:44 mgerhard kernel: ata1: soft resetting port
May  9 14:47:44 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:47:44 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:47:44 mgerhard kernel: ata1: EH complete
May  9 14:47:44 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:47:44 mgerhard kernel: sda: Write Protect is off
May  9 14:47:44 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:47:44 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:47:44 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:47:44 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:47:44 mgerhard kernel: ata1.00: cmd 35/00:00:d8:39:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:47:44 mgerhard kernel:          res 51/84:30:a8:3b:c8/84:02:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:47:44 mgerhard kernel: ata1: soft resetting port
May  9 14:47:44 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:47:44 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:47:44 mgerhard kernel: ata1: EH complete
May  9 14:47:44 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:47:44 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:47:44 mgerhard kernel: ata1.00: cmd 35/00:00:d8:3d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:47:44 mgerhard kernel:          res 51/84:20:b8:3e:c8/84:03:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:47:44 mgerhard kernel: ata1: soft resetting port
May  9 14:47:45 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:47:45 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:47:45 mgerhard kernel: ata1: EH complete
May  9 14:47:45 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:47:45 mgerhard kernel: sda: Write Protect is off
May  9 14:47:45 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:47:45 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:47:45 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:47:45 mgerhard kernel: sda: Write Protect is off
May  9 14:47:45 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:47:45 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:47:45 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:47:45 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:47:45 mgerhard kernel: ata1.00: cmd 35/00:00:d8:41:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:47:45 mgerhard kernel:          res 51/84:70:68:43:c8/84:02:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:47:45 mgerhard kernel: ata1: soft resetting port
May  9 14:47:45 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:47:45 mgerhard kernel: ata1.00: configured for UDMA/66
May  9 14:47:45 mgerhard kernel: ata1: EH complete
May  9 14:47:45 mgerhard kernel: ata1.00: limiting speed to UDMA/33:PIO4
May  9 14:47:45 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:47:45 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:47:45 mgerhard kernel: ata1.00: cmd 35/00:00:d8:41:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:47:45 mgerhard kernel:          res 51/84:10:c8:45:c8/84:00:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:47:45 mgerhard kernel: ata1: soft resetting port
May  9 14:47:46 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:47:46 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:47:46 mgerhard kernel: ata1: EH complete
May  9 14:48:16 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:48:16 mgerhard kernel: ata1.00: cmd 35/00:00:d8:41:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:48:16 mgerhard kernel:          res 40/00:10:c8:45:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:48:23 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:48:46 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:48:46 mgerhard kernel: ata1: soft resetting port
May  9 14:48:46 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:48:46 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:48:46 mgerhard kernel: ata1: EH complete
May  9 14:48:46 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:48:46 mgerhard kernel: sda: Write Protect is off
May  9 14:48:46 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:48:46 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:48:46 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:48:46 mgerhard kernel: sda: Write Protect is off
May  9 14:48:46 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:48:46 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:49:08 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:49:08 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:49:08 mgerhard kernel: ata1.00: cmd 35/00:88:a8:63:c8/00:02:09:00:00/e0 tag 0 cdb 0x0 data 331776 out
May  9 14:49:08 mgerhard kernel:          res 51/84:38:f8:64:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:49:08 mgerhard kernel: ata1: soft resetting port
May  9 14:49:08 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:49:08 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:49:08 mgerhard kernel: ata1: EH complete
May  9 14:49:08 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:49:08 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:49:08 mgerhard kernel: ata1.00: cmd 35/00:88:a8:63:c8/00:02:09:00:00/e0 tag 0 cdb 0x0 data 331776 out
May  9 14:49:08 mgerhard kernel:          res 51/84:38:f8:64:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:49:09 mgerhard kernel: ata1: soft resetting port
May  9 14:49:09 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:49:09 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:49:09 mgerhard kernel: ata1: EH complete
May  9 14:49:09 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:49:09 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:49:09 mgerhard kernel: ata1.00: cmd 35/00:88:a8:63:c8/00:02:09:00:00/e0 tag 0 cdb 0x0 data 331776 out
May  9 14:49:09 mgerhard kernel:          res 51/84:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:49:09 mgerhard kernel: ata1: soft resetting port
May  9 14:49:09 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:49:09 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:49:09 mgerhard kernel: ata1: EH complete
May  9 14:49:09 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:49:09 mgerhard kernel: sda: Write Protect is off
May  9 14:49:09 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:49:09 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:49:09 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:50:10 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:50:10 mgerhard kernel: ata1.00: cmd 35/00:38:58:be:23/00:02:00:00:00/e0 tag 0 cdb 0x0 data 290816 out
May  9 14:50:10 mgerhard kernel:          res 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:50:10 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:50:10 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:50:10 mgerhard kernel: ata1: soft resetting port
May  9 14:50:10 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:50:10 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:50:10 mgerhard kernel: ata1: EH complete
May  9 14:50:10 mgerhard kernel: sda: Write Protect is off
May  9 14:50:10 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:50:10 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:50:10 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:50:10 mgerhard kernel: sda: Write Protect is off
May  9 14:50:10 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:50:10 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:51:35 mgerhard kernel: ata1.00: cmd 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:51:35 mgerhard kernel:          res 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:52:05 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:52:05 mgerhard kernel: ata1: soft resetting port
May  9 14:52:05 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:52:05 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:52:05 mgerhard kernel: ata1: EH complete
May  9 14:52:05 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:52:05 mgerhard kernel: sda: Write Protect is off
May  9 14:52:05 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:52:05 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:52:09 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:52:09 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:52:09 mgerhard kernel: ata1.00: cmd 35/00:00:30:77:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:52:09 mgerhard kernel:          res 51/84:40:f0:77:c8/84:03:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:52:09 mgerhard kernel: ata1: soft resetting port
May  9 14:52:09 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:52:09 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:52:09 mgerhard kernel: ata1: EH complete
May  9 14:52:09 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:52:09 mgerhard kernel: sda: Write Protect is off
May  9 14:52:09 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:52:09 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:52:09 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:52:09 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:52:09 mgerhard kernel: ata1.00: cmd 35/00:e8:30:7f:c8/00:01:09:00:00/e0 tag 0 cdb 0x0 data 249856 out
May  9 14:52:09 mgerhard kernel:          res 51/84:08:10:80:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:52:09 mgerhard kernel: ata1: soft resetting port
May  9 14:52:09 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:52:09 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:52:09 mgerhard kernel: ata1: EH complete
May  9 14:52:09 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:52:09 mgerhard kernel: sda: Write Protect is off
May  9 14:52:09 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:52:09 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:52:10 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:52:10 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:52:10 mgerhard kernel: ata1.00: cmd 35/00:28:d8:bc:1f/00:02:0b:00:00/e0 tag 0 cdb 0x0 data 282624 out
May  9 14:52:10 mgerhard kernel:          res 51/84:08:f8:bc:1f/84:02:0b:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:52:11 mgerhard kernel: ata1: soft resetting port
May  9 14:52:11 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:52:11 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:52:11 mgerhard kernel: ata1: EH complete
May  9 14:52:11 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:52:11 mgerhard kernel: sda: Write Protect is off
May  9 14:52:11 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:52:11 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:52:41 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
May  9 14:52:41 mgerhard kernel: ata1.00: cmd 35/00:38:10:d2:23/00:02:00:00:00/e0 tag 0 cdb 0x0 data 290816 out
May  9 14:52:41 mgerhard kernel:          res 40/00:08:f8:bc:1f/84:02:0b:00:00/e0 Emask 0x4 (timeout)
May  9 14:52:48 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:53:11 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:53:11 mgerhard kernel: ata1: soft resetting port
May  9 14:53:11 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:53:11 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:53:11 mgerhard kernel: ata1: EH complete
May  9 14:53:11 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:53:11 mgerhard kernel: sda: Write Protect is off
May  9 14:53:11 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:53:11 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:57:33 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2 frozen
May  9 14:57:33 mgerhard kernel: ata1.00: cmd 35/00:28:30:90:1b/00:02:0b:00:00/e0 tag 0 cdb 0x0 data 282624 out
May  9 14:57:33 mgerhard kernel:          res 40/00:08:f8:bc:1f/84:02:0b:00:00/e0 Emask 0x4 (timeout)
May  9 14:57:40 mgerhard kernel: ata1: port is slow to respond, please be patient (Status 0xd0)
May  9 14:58:04 mgerhard kernel: ata1: port failed to respond (30 secs, Status 0xd0)
May  9 14:58:04 mgerhard kernel: ata1: soft resetting port
May  9 14:58:04 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:04 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:04 mgerhard kernel: ata1: EH complete
May  9 14:58:04 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:58:04 mgerhard kernel: sda: Write Protect is off
May  9 14:58:04 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:58:04 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:58:45 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:58:45 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:58:45 mgerhard kernel: ata1.00: cmd 35/00:b0:18:04:f0/00:03:0c:00:00/e0 tag 0 cdb 0x0 data 483328 out
May  9 14:58:45 mgerhard kernel:          res 51/84:90:38:07:f0/84:00:0c:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:58:46 mgerhard kernel: ata1: soft resetting port
May  9 14:58:46 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:46 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:46 mgerhard kernel: ata1: EH complete
May  9 14:58:46 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:58:46 mgerhard kernel: sda: Write Protect is off
May  9 14:58:46 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:58:46 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:58:46 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:58:46 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:58:46 mgerhard kernel: ata1.00: cmd 35/00:00:a0:84:f0/00:04:0c:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:58:46 mgerhard kernel:          res 51/84:c0:e0:84:f0/84:03:0c:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:58:46 mgerhard kernel: ata1: soft resetting port
May  9 14:58:46 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:46 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:46 mgerhard kernel: ata1: EH complete
May  9 14:58:46 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:58:46 mgerhard kernel: sda: Write Protect is off
May  9 14:58:46 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:58:46 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:58:46 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:58:46 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:58:46 mgerhard kernel: ata1.00: cmd 35/00:00:a0:90:f0/00:04:0c:00:00/e0 tag 0 cdb 0x0 data 524288 out
May  9 14:58:46 mgerhard kernel:          res 51/84:40:60:92:f0/84:02:0c:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:58:47 mgerhard kernel: ata1: soft resetting port
May  9 14:58:47 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:47 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:47 mgerhard kernel: ata1: EH complete
May  9 14:58:47 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:58:47 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:58:47 mgerhard kernel: ata1.00: cmd 35/00:68:a0:94:f0/00:03:0c:00:00/e0 tag 0 cdb 0x0 data 446464 out
May  9 14:58:47 mgerhard kernel:          res 51/84:68:a0:95:f0/84:02:0c:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:58:47 mgerhard kernel: ata1: soft resetting port
May  9 14:58:47 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:47 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:47 mgerhard kernel: ata1: EH complete
May  9 14:58:47 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:58:47 mgerhard kernel: sda: Write Protect is off
May  9 14:58:47 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:58:47 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:58:47 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:58:47 mgerhard kernel: ata1.00: cmd 35/00:60:20:4d:23/00:02:00:00:00/e0 tag 0 cdb 0x0 data 311296 out
May  9 14:58:47 mgerhard kernel:          res 51/84:30:50:4d:23/84:02:00:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:58:48 mgerhard kernel: ata1: soft resetting port
May  9 14:58:48 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:48 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:48 mgerhard kernel: ata1: EH complete
May  9 14:58:48 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
May  9 14:58:48 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
May  9 14:58:48 mgerhard kernel: ata1.00: cmd 35/00:60:20:4d:23/00:02:00:00:00/e0 tag 0 cdb 0x0 data 311296 out
May  9 14:58:48 mgerhard kernel:          res 51/84:60:20:4e:23/84:01:00:00:00/e0 Emask 0x10 (ATA bus error)
May  9 14:58:48 mgerhard kernel: ata1: soft resetting port
May  9 14:58:48 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May  9 14:58:48 mgerhard kernel: ata1.00: configured for UDMA/33
May  9 14:58:48 mgerhard kernel: ata1: EH complete
May  9 14:58:48 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 14:58:48 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May  9 14:58:48 mgerhard kernel: sda: Write Protect is off
May  9 14:58:48 mgerhard kernel: sda: Mode Sense: 00 3a 00 00
May  9 14:58:48 mgerhard kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 15:06:53 mgerhard kernel: Kernel logging (proc) stopped.
May  9 15:06:53 mgerhard kernel: Kernel log daemon terminating.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-09 21:43   ` Gerhard Mack
@ 2007-05-09 22:58     ` Chuck Ebbert
  2007-05-10  8:51     ` Mikael Pettersson
  1 sibling, 0 replies; 16+ messages in thread
From: Chuck Ebbert @ 2007-05-09 22:58 UTC (permalink / raw)
  To: Gerhard Mack; +Cc: Jeff Garzik, linux-kernel

Gerhard Mack wrote:
> On Wed, 9 May 2007, Jeff Garzik wrote:
>> Gerhard Mack wrote:
>>> May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>> 0x1800000 action 0x2 frozen
>>> May  9 14:51:35 mgerhard kernel: ata1.00: cmd
>>> 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>>> May  9 14:51:35 mgerhard kernel:          res
>>> 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
>>> May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be
>>> patient (Status 0xd0)
>>>
>>> Anything I can do to figgure out what's causing this?
>> Provide full lspci, dmesg, kernel config?
>>
> Done.
> 

You could try:

   pci=nomsi (kernel option)

and/or

   adma=0 (module option for sata_nv)


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-09 21:43   ` Gerhard Mack
  2007-05-09 22:58     ` Chuck Ebbert
@ 2007-05-10  8:51     ` Mikael Pettersson
  2007-05-10 11:27       ` Gerhard Mack
  1 sibling, 1 reply; 16+ messages in thread
From: Mikael Pettersson @ 2007-05-10  8:51 UTC (permalink / raw)
  To: Gerhard Mack; +Cc: Jeff Garzik, linux-kernel

Gerhard Mack writes:
 > On Wed, 9 May 2007, Jeff Garzik wrote:
 > > Gerhard Mack wrote:
 > > > May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr
 > > > 0x1800000 action 0x2 frozen
 > > > May  9 14:51:35 mgerhard kernel: ata1.00: cmd
 > > > 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
 > > > May  9 14:51:35 mgerhard kernel:          res
 > > > 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
 > > > May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be
 > > > patient (Status 0xd0)
 > > > 
 > > > Anything I can do to figgure out what's causing this?
 > > 
 > > Provide full lspci, dmesg, kernel config?
 > > 
 > Done.

Your second boot (warm or cold?)

 > May  9 14:43:07 mgerhard kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
 > May  9 14:43:07 mgerhard kernel: Linux version 2.6.21.1 (root@mgerhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Wed May 2 20:08:35 EDT 2007
 > May  9 14:43:07 mgerhard kernel: Command line: root=/dev/sda3 ro 

worked fine until ReiserFS's journal replay caused a single SATA exception:

 > May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: There were 7 uncompleted unlinks/truncates. Completed
 > May  9 14:43:07 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
 > May  9 14:43:07 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
 > May  9 14:43:07 mgerhard kernel: ata1.00: cmd 35/00:58:20:4d:23/00:01:00:00:00/e0 tag 0 cdb 0x0 data 176128 out
 > May  9 14:43:07 mgerhard kernel:          res 51/84:28:50:4d:23/84:01:00:00:00/e0 Emask 0x10 (ATA bus error)
 > May  9 14:43:07 mgerhard kernel: ata1: soft resetting port
 > May  9 14:43:07 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 > May  9 14:43:07 mgerhard kernel: ata1.00: configured for UDMA/100
 > May  9 14:43:07 mgerhard kernel: ata1: EH complete
 > May  9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)

Shortly thereafter you loaded a proprietary module

 > May  9 14:43:17 mgerhard kernel: nvidia: module license 'NVIDIA' taints kernel.
 > May  9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
 > May  9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
 > May  9 14:43:17 mgerhard kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64
 > May  9 14:43:17 mgerhard kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  1.0-9746  Fri Dec 15 10:19:35 PST 2006

and immediately there's a large number of SATA exceptions:

 > May  9 14:44:37 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
 > May  9 14:44:37 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
 > May  9 14:44:37 mgerhard kernel: ata1.00: cmd 35/00:00:b0:53:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
 > May  9 14:44:37 mgerhard kernel:          res 51/84:60:50:56:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
 > May  9 14:44:37 mgerhard kernel: ata1: soft resetting port
 > May  9 14:44:37 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 > May  9 14:44:37 mgerhard kernel: ata1.00: configured for UDMA/100
(repeated)

Please try a cold boot (so the HW is in a pristine state) without
ever loading the nvidia module.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [2.6.21.1] SATA freeze
  2007-05-10  8:51     ` Mikael Pettersson
@ 2007-05-10 11:27       ` Gerhard Mack
  0 siblings, 0 replies; 16+ messages in thread
From: Gerhard Mack @ 2007-05-10 11:27 UTC (permalink / raw)
  To: Mikael Pettersson; +Cc: Jeff Garzik, linux-kernel

On Thu, 10 May 2007, Mikael Pettersson wrote:

> Date: Thu, 10 May 2007 10:51:57 +0200
> From: Mikael Pettersson <mikpe@it.uu.se>
> To: Gerhard Mack <gmack@innerfire.net>
> Cc: Jeff Garzik <jeff@garzik.org>, linux-kernel@vger.kernel.org
> Subject: Re: [2.6.21.1] SATA freeze
> 
> Gerhard Mack writes:
>  > On Wed, 9 May 2007, Jeff Garzik wrote:
>  > > Gerhard Mack wrote:
>  > > > May  9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr
>  > > > 0x1800000 action 0x2 frozen
>  > > > May  9 14:51:35 mgerhard kernel: ata1.00: cmd
>  > > > 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>  > > > May  9 14:51:35 mgerhard kernel:          res
>  > > > 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
>  > > > May  9 14:51:42 mgerhard kernel: ata1: port is slow to respond, please be
>  > > > patient (Status 0xd0)
>  > > > 
>  > > > Anything I can do to figgure out what's causing this?
>  > > 
>  > > Provide full lspci, dmesg, kernel config?
>  > > 
>  > Done.
> 
> Your second boot (warm or cold?)

Warm boot.

> 
>  > May  9 14:43:07 mgerhard kernel: klogd 1.4.1#20, log source = /proc/kmsg started.
>  > May  9 14:43:07 mgerhard kernel: Linux version 2.6.21.1 (root@mgerhard) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Wed May 2 20:08:35 EDT 2007
>  > May  9 14:43:07 mgerhard kernel: Command line: root=/dev/sda3 ro 
> 
> worked fine until ReiserFS's journal replay caused a single SATA exception:
> 
>  > May  9 14:43:07 mgerhard kernel: ReiserFS: sda3: There were 7 uncompleted unlinks/truncates. Completed
>  > May  9 14:43:07 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
>  > May  9 14:43:07 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
>  > May  9 14:43:07 mgerhard kernel: ata1.00: cmd 35/00:58:20:4d:23/00:01:00:00:00/e0 tag 0 cdb 0x0 data 176128 out
>  > May  9 14:43:07 mgerhard kernel:          res 51/84:28:50:4d:23/84:01:00:00:00/e0 Emask 0x10 (ATA bus error)
>  > May  9 14:43:07 mgerhard kernel: ata1: soft resetting port
>  > May  9 14:43:07 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>  > May  9 14:43:07 mgerhard kernel: ata1.00: configured for UDMA/100
>  > May  9 14:43:07 mgerhard kernel: ata1: EH complete
>  > May  9 14:43:07 mgerhard kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
> 
> Shortly thereafter you loaded a proprietary module

Oops thought I killed that.

> 
>  > May  9 14:43:17 mgerhard kernel: nvidia: module license 'NVIDIA' taints kernel.
>  > May  9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
>  > May  9 14:43:17 mgerhard kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
>  > May  9 14:43:17 mgerhard kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64
>  > May  9 14:43:17 mgerhard kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  1.0-9746  Fri Dec 15 10:19:35 PST 2006
> 
> and immediately there's a large number of SATA exceptions:
> 
>  > May  9 14:44:37 mgerhard kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
>  > May  9 14:44:37 mgerhard kernel: ata1.00: (BMDMA stat 0x25)
>  > May  9 14:44:37 mgerhard kernel: ata1.00: cmd 35/00:00:b0:53:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>  > May  9 14:44:37 mgerhard kernel:          res 51/84:60:50:56:c8/84:01:09:00:00/e0 Emask 0x10 (ATA bus error)
>  > May  9 14:44:37 mgerhard kernel: ata1: soft resetting port
>  > May  9 14:44:37 mgerhard kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>  > May  9 14:44:37 mgerhard kernel: ata1.00: configured for UDMA/100
> (repeated)
> 
> Please try a cold boot (so the HW is in a pristine state) without
> ever loading the nvidia module.

Cold boot cleared the drive problems.  Nvidia loaded or not has no affect 
on it at this point.


Thanks for the help.

	Gerhard

--
Gerhard Mack

gmack@innerfire.net

<>< As a computer I find your faith in technology amusing.

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2007-06-04 13:00 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <fa.nl0Mcy44vzL27dQ8CsLG/+SfNO0@ifi.uio.no>
     [not found] ` <fa.Odn/BmbDLGQp4kzhwqs6TScgkdE@ifi.uio.no>
     [not found]   ` <fa.QtdEc9oISM5NdAmikW4kWhdGDeM@ifi.uio.no>
     [not found]     ` <fa.YyeTl86xaR6Y3MLVL7vUm5SgUzc@ifi.uio.no>
     [not found]       ` <fa.9rF0YSLySQV/+6iXNTOmlASflXA@ifi.uio.no>
2007-05-12 18:34         ` [2.6.21.1] SATA freeze Robert Hancock
2007-06-04 12:59 Tomasz Chmielewski
     [not found] <fa.zU1kuoSgByTYCYqY+iCQ5rMJy34@ifi.uio.no>
2007-05-12 18:48 ` Robert Hancock
2007-05-12 19:09   ` Fred Moyer
2007-05-13  1:02     ` Robert Hancock
2007-05-13  1:52       ` Fred Moyer
2007-05-13  1:20   ` Robin H. Johnson
2007-05-13 18:18     ` Jim Paris
     [not found] <fa.Ngs+g4HBWK5JUzEhRMjcVQVR448@ifi.uio.no>
     [not found] ` <fa.xHed6JNWpYYFYmDy7FY+p6HTjPw@ifi.uio.no>
     [not found]   ` <fa.I0i3SlPzvZnxCYuJNFL3tixqEJU@ifi.uio.no>
2007-05-09 23:48     ` Robert Hancock
2007-05-10 11:40       ` Gerhard Mack
  -- strict thread matches above, loose matches on Subject: below --
2007-05-09 18:54 Gerhard Mack
2007-05-09 19:53 ` Jeff Garzik
2007-05-09 21:43   ` Gerhard Mack
2007-05-09 22:58     ` Chuck Ebbert
2007-05-10  8:51     ` Mikael Pettersson
2007-05-10 11:27       ` Gerhard Mack

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox