Hello,

I have got a VIA EPIA EX15000G Mini-ITX mainboard with a C7 VIA Esther 
processor (1500MHz).
There are two options in the BIOS that affect CPU feature flags:

C7 CMPXCHG8 - enable/disable (Disable to install windows NT 4.0) and
C7 No Execute (NX) - enable/disable

I enabled both and compiled a new 2.6.22-rc1-mm1 kernel. So far so good.

The problem is that the system is very unstable and crashes regularly 
(1-3 times a day).
After a crash the bios resets the two processor flags back to disabled. 
But like this
the kernel complains and does not continiue booting:

 > This kernel requires the following features not present on the CPU:
 > 0:8

Each time this happens, I have to go to the BIOS and manually enable 
these flags again.
That is pretty annoying! :(
I attached a cpuinfo.txt. When the two flags are disabled, cx8 and nx 
are not listed there.


Now my question is:

Would it be possible to override the BIOS settings of cx8 and nx and 
activate it with linux anyway?
The CPU supports it and I don't see any reason to disable it.


I already wrote several emails to VIA months ago saying that this is 
probably a bug in their BIOS, but they
are neitherreleasing a new BIOS nor reacting in any way. Their so called 
support website viaarena.com
is not helping neither. Since VIA is not helping at all, the only 
soulution I see would be to override the
BIOS'es decision.

Concerning the crashes I already changed the memory module, but with no 
success. I'm not sure
wether this is a hardware or software bug.


Many regards,
claas