From: "H. Peter Anvin" <hpa@zytor.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Adrian Bunk <bunk@stusta.de>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: 2.6.22-rc1-mm1: IDE compile error
Date: Thu, 24 May 2007 11:53:40 -0700 [thread overview]
Message-ID: <4655DF34.7000507@zytor.com> (raw)
In-Reply-To: <20070524115549.01c0e1ca@the-village.bc.nu>
Alan Cox wrote:
>>> hd.c:(.init.text+0x44a7d): undefined reference to `drive_info'
>>> hd.c:(.init.text+0x44a89): undefined reference to `drive_info'
>>> hd.c:(.init.text+0x44a95): undefined reference to `drive_info'
>>> hd.c:(.init.text+0x44aa1): undefined reference to `drive_info'
>>> hd.c:(.init.text+0x44aad): undefined reference to `drive_info'
>>> drivers/built-in.o:hd.c:(.init.text+0x44ab9): more undefined references to `drive_info' follow
>>> make[1]: *** [.tmp_vmlinux1] Error 1
>>>
>>> <-- snip -->
>>>
>>> Considering the fact that we have two more recent drivers with the same
>>> functionality, it might be an option to simply remove this driver...
>> Care to send a patch?
>
> hd.c can drive MFM and RLL disks and drivers/ide cannot. Although it
> really wants burying further down the config tree the ability to read MFM
> and RLL disks when recovering ancient data is useful and people do
> actually use this driver now and then rescuing stuff like twenty year old
> datasets.
>
> It thus needs fixing not removing.
Why is this driver parked in drivers/ide/legacy when the companion
driver, xd.c, is in drivers/block (where hd.c used to be at one point,
too)? Especially so since it's not really for IDE, but for ST-506.
HOWEVER, the code that fails above hard-assumes that the ST-506 disks
that you have are your primary system drives, which is obviously a wrong
assumption -- ST-506 drives were obsolete quite a while before Linux
existed[1].
xd.c, on the other hand, seems to actually go out and query the hardware
directly. I guess this is understandably, since this controller would
never have been primary.
If hd.c is pure legacy, which it obviously is, should we remove the code
to assume the BIOS settings are the MFM/RLL settings (i.e. the __i386__
clause), and instead do something more like the __arm__ clause which
means that "if you really want to use this you have to specify the
parameters manually"?
-hpa
[1] The 386-16 that I had access to at Northwestern, which with 0.59
BogoMIPS was the slowest Linux system in existence until Linux was
ported to other architectures, might have been an ST-506 drive, but I'm
not sure.
next prev parent reply other threads:[~2007-05-24 18:56 UTC|newest]
Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-16 3:19 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 6:06 ` 2.6.22-rc1-mm1 KAMEZAWA Hiroyuki
2007-05-16 7:58 ` 2.6.22-rc1-mm1 Jeff Garzik
2007-05-16 8:04 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 15:33 ` 2.6.22-rc1-mm1 Jeff Garzik
2007-05-16 20:24 ` 2.6.22-rc1-mm1 Darrick J. Wong
2007-05-16 16:54 ` 2.6.22-rc1-mm1 Randy Dunlap
2007-05-16 7:57 ` 2.6.22-rc1-mm1 - s390 vs. md Cornelia Huck
2007-05-16 17:21 ` Williams, Dan J
2007-05-16 10:18 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-05-16 15:16 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 17:40 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-16 17:55 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 18:18 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-05-16 18:00 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 23:32 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 23:36 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-17 9:35 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-29 22:34 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-01 9:50 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-01 23:12 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-06-05 18:38 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-05 22:57 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-06-07 9:49 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-11 13:58 ` 2.6.22-rc1-mm1 Andy Whitcroft
[not found] ` <63a08cc7547f14065becdf9a94d0d529@pinky>
2007-06-11 16:15 ` [PATCH] move the kernel to 16MB for NUMA-Q Andrew Morton
2007-06-11 17:20 ` Dave Jones
2007-06-11 17:36 ` H. Peter Anvin
2007-06-11 18:19 ` Jan Engelhardt
2007-06-11 18:46 ` Dave Jones
2007-06-11 19:17 ` Alan Cox
2007-06-11 20:07 ` Rene Herman
2007-06-11 20:21 ` Rene Herman
2007-06-11 19:01 ` H. Peter Anvin
2007-06-11 20:44 ` Jan Engelhardt
2007-06-11 20:51 ` H. Peter Anvin
2007-06-15 11:12 ` Jan Engelhardt
2007-06-11 17:49 ` Rene Herman
2007-06-11 17:58 ` H. Peter Anvin
2007-06-11 18:01 ` Rene Herman
2007-05-17 4:16 ` 2.6.22-rc1-mm1 Bharata B Rao
2007-05-18 8:54 ` 2.6.22-rc1-mm1 young dave
2007-05-18 10:07 ` 2.6.22-rc1-mm1 young dave
2007-05-18 16:54 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-18 16:59 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-21 0:53 ` 2.6.22-rc1-mm1 young dave
2007-05-21 4:49 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-21 5:00 ` 2.6.22-rc1-mm1 young dave
2007-05-21 5:03 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-21 5:39 ` 2.6.22-rc1-mm1 young dave
[not found] ` <465138CC.3060605@zytor.com>
2007-05-21 8:41 ` 2.6.22-rc1-mm1 young dave
2007-05-21 16:35 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-22 2:14 ` 2.6.22-rc1-mm1 young dave
[not found] ` <465319C1.2080206@zytor.com>
2007-05-23 1:15 ` 2.6.22-rc1-mm1 young dave
2007-05-16 12:10 ` (NFS) BUG: at page-writeback.c:829 [Was: 2.6.22-rc1-mm1] Jiri Slaby
2007-05-16 12:39 ` Nick Piggin
2007-05-16 12:44 ` Jiri Slaby
2007-05-16 12:47 ` Nick Piggin
2007-05-16 13:00 ` Trond Myklebust
2007-05-16 13:06 ` Nick Piggin
2007-05-16 12:52 ` Trond Myklebust
2007-05-16 14:30 ` 2.6.22-rc1-mm1 Michal Piotrowski
2007-05-16 14:37 ` 2.6.22-rc1-mm1 Nick Piggin
[not found] ` <6bffcb0e0705160935r1767a764hce72f24f9eee6c1e@mail.gmail.com>
2007-05-16 16:58 ` 2.6.22-rc1-mm1 Jiri Slaby
2007-05-16 15:34 ` 2.6.22-rc1-mm1 Gabriel C
2007-05-16 16:24 ` 2.6.22-rc1-mm1 Michal Piotrowski
2007-05-16 16:41 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-17 2:06 ` 2.6.22-rc1-mm1 David Chinner
2007-05-17 8:41 ` [xfs-masters] 2.6.22-rc1-mm1 Christoph Hellwig
2007-05-17 20:05 ` Michal Piotrowski
2007-05-18 2:11 ` David Chinner
2007-05-21 10:11 ` David Chinner
2007-05-21 10:23 ` Christoph Hellwig
2007-05-22 10:44 ` David Chinner
2007-05-22 11:42 ` Christoph Hellwig
2007-05-22 23:23 ` Nathan Scott
2007-05-22 14:45 ` Michal Piotrowski
2007-05-16 16:50 ` 2.6.22-rc1-mm1 Randy Dunlap
2007-05-16 17:00 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-16 17:06 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 19:55 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-16 20:00 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-18 17:34 ` 2.6.22-rc1-mm1 Edward Shishkin
2007-05-16 17:37 ` 2.6.22-rc1-mm1 [cannot change thermal trip points] Maciej Rutecki
2007-05-16 17:47 ` Chuck Ebbert
2007-05-16 18:10 ` Goulven Guillard
2007-05-17 9:23 ` Pavel Machek
2007-05-17 13:36 ` Maciej Rutecki
2007-05-17 19:08 ` Len Brown
2007-05-17 20:09 ` Maciej Rutecki
2007-05-17 20:42 ` Maciej Rutecki
2007-05-17 21:53 ` Pavel Machek
2007-05-17 22:42 ` Len Brown
2007-05-21 12:11 ` Pavel Machek
2007-06-01 2:46 ` Len Brown
2007-06-04 11:16 ` Pavel Machek
2007-05-17 19:17 ` Len Brown
2007-05-17 21:52 ` Pavel Machek
2007-05-17 22:35 ` Len Brown
2007-06-04 9:02 ` Stefan Seyfried
2007-06-04 11:06 ` Pavel Machek
2007-05-19 19:56 ` Thomas Renninger
2007-05-21 3:50 ` Len Brown
2007-05-21 11:31 ` Thomas Renninger
2007-05-21 12:10 ` Pavel Machek
2007-05-21 13:27 ` Matthew Garrett
2007-05-21 13:29 ` Pavel Machek
2007-05-21 13:36 ` Matthew Garrett
2007-05-21 13:40 ` Pavel Machek
2007-05-21 13:45 ` Matthew Garrett
2007-05-21 22:42 ` Pavel Machek
2007-05-22 0:31 ` Matthew Garrett
2007-05-22 9:06 ` Pavel Machek
2007-05-22 9:16 ` Matthew Garrett
2007-05-22 9:28 ` Goulven Guillard
2007-05-22 10:05 ` Maciej Rutecki
2007-06-04 9:13 ` Stefan Seyfried
2007-05-24 14:16 ` 2.6.22-rc1-mm1 Implementing fan/thermal control in userspace - Was: " Thomas Renninger
2007-05-24 14:36 ` Matthew Garrett
2007-05-24 18:18 ` Thomas Renninger
2007-05-25 6:38 ` Pavel Machek
2007-05-27 21:51 ` Matthew Garrett
2007-05-28 10:58 ` Pavel Machek
2007-05-28 12:50 ` Matthew Garrett
2007-05-28 12:53 ` Pavel Machek
2007-05-16 18:55 ` 2.6.22-rc1-mm1: IDE compile error Adrian Bunk
2007-05-23 23:45 ` Bartlomiej Zolnierkiewicz
2007-05-24 10:55 ` Alan Cox
2007-05-24 18:53 ` H. Peter Anvin [this message]
2007-05-25 0:05 ` H. Peter Anvin
2007-05-25 0:14 ` Alan Cox
2007-05-25 0:18 ` H. Peter Anvin
2007-05-25 0:38 ` Alan Cox
2007-05-25 0:51 ` H. Peter Anvin
2007-05-25 14:19 ` Alan Cox
2007-05-17 12:38 ` 2.6.22-rc1-mm1 - Call trace in slub_def.h Reuben Farrelly
2007-05-17 12:52 ` Satyam Sharma
2007-05-20 10:12 ` 2.6.22-rc1-mm1 Mariusz Kozlowski
2007-05-20 10:21 ` 2.6.22-rc1-mm1 Sam Ravnborg
2007-05-20 15:33 ` 2.6.22-rc1-mm1 Kumar Gala
2007-05-22 7:25 ` 2.6.22-rc1-mm1: evm BUG when reading sysfs file Joseph Fannin
2007-05-22 21:23 ` Andrew Morton
2007-05-25 21:05 ` Mimi Zohar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4655DF34.7000507@zytor.com \
--to=hpa@zytor.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bunk@stusta.de \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).