From: Artem Bityutskiy <dedekind@yandex.ru>
To: Satyam Sharma <satyam.sharma@gmail.com>
Cc: Daniel Hazelton <dhazelton@enter.net>,
Michael-Luke Jones <mlj28@cam.ac.uk>,
lkml <linux-kernel@vger.kernel.org>,
dwmw2@infradead.org, Mark Adler <madler@alumni.caltech.edu>,
jloup@gzip.org
Subject: Re: JFFS2 using 'private' zlib header (was [RFC] LZO de/compression support - take 6)
Date: Wed, 30 May 2007 19:43:35 +0300 [thread overview]
Message-ID: <465DA9B7.30700@yandex.ru> (raw)
In-Reply-To: <a781481a0705300912j4dc7776cjc50707cffd8a0cbf@mail.gmail.com>
Satyam Sharma wrote:
> Hi Artem,
>
> On 5/30/07, Artem Bityutskiy <dedekind@yandex.ru> wrote:
>> Err, and important note is that it also wants this compressed data to be
>> independently uncompressable.
>
> Hmm, okay.
>
> But what I meant was that if jffs2's needs are "standard" enough in
> the sense that they could conceivably be required by other users too
> (and this one mentioned by you does appear to be one of those),
> then why not make such hacks (if they are necessary and suitable
> indeed, lets wait for Mark's response) part of zlib itself?
I really not sure - I vaguely remember that zlib just cannot provide this
capability. And what JFFS2 does is not always correct. But again, it was
so long time ago...
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2007-05-30 16:43 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-28 14:34 [RFC] LZO de/compression support - take 6 Nitin Gupta
2007-05-28 14:40 ` Nitin Gupta
2007-05-28 14:49 ` Daniel Hazelton
2007-05-28 15:06 ` Nitin Gupta
2007-05-28 15:43 ` Adrian Bunk
2007-05-28 16:03 ` Nitin Gupta
2007-05-28 17:11 ` Adrian Bunk
2007-05-28 19:59 ` Daniel Hazelton
2007-05-28 20:18 ` Daniel Hazelton
2007-05-28 20:52 ` Daniel Hazelton
2007-05-29 5:55 ` Nitin Gupta
2007-05-29 8:08 ` Michael-Luke Jones
2007-05-29 11:40 ` Adrian Bunk
2007-05-29 12:03 ` Nitin Gupta
2007-05-29 13:13 ` Daniel Hazelton
2007-05-29 21:10 ` Jan Engelhardt
2007-05-29 21:26 ` Adrian Bunk
2007-05-30 5:31 ` Nitin Gupta
2007-05-30 13:56 ` Johannes Stezenbach
2007-05-30 14:24 ` Satyam Sharma
2007-05-28 15:30 ` Adrian Bunk
2007-05-28 15:47 ` Nitin Gupta
2007-05-28 15:55 ` Daniel Hazelton
2007-05-28 17:01 ` Adrian Bunk
2007-05-28 19:51 ` Daniel Hazelton
2007-05-28 15:49 ` Daniel Hazelton
2007-05-28 22:57 ` Bret Towe
2007-05-29 5:48 ` Nitin Gupta
2007-05-29 13:09 ` Daniel Hazelton
2007-05-28 22:53 ` Bret Towe
2007-05-28 22:58 ` Bret Towe
2007-05-29 5:58 ` Nitin Gupta
2007-05-29 20:14 ` Daniel Hazelton
2007-05-29 20:33 ` Daniel Hazelton
2007-05-29 21:48 ` Daniel Hazelton
2007-05-29 23:32 ` Daniel Hazelton
2007-05-30 5:19 ` Nitin Gupta
2007-05-29 8:17 ` Makefile question (was [RFC] LZO de/compression support - take 6) Michael-Luke Jones
2007-05-29 10:41 ` Satyam Sharma
2007-05-29 10:51 ` Michael-Luke Jones
2007-05-29 11:27 ` Satyam Sharma
2007-05-29 13:33 ` JFFS2 using 'private' zlib header " Michael-Luke Jones
2007-05-29 13:43 ` Daniel Hazelton
2007-05-29 15:15 ` Satyam Sharma
2007-05-29 16:20 ` Daniel Hazelton
2007-05-30 5:31 ` Mark Adler
2007-05-30 13:05 ` Daniel Hazelton
2007-05-30 13:30 ` Satyam Sharma
2007-05-30 23:02 ` Mark Adler
2007-05-30 23:26 ` Daniel Hazelton
2007-06-01 3:06 ` Daniel Hazelton
2007-06-01 17:24 ` Satyam Sharma
2007-05-30 13:41 ` Artem Bityutskiy
2007-05-30 15:46 ` Artem Bityutskiy
2007-05-30 16:12 ` Satyam Sharma
2007-05-30 16:43 ` Artem Bityutskiy [this message]
2007-05-29 20:48 ` [RFC] LZO de/compression support - take 6 Jan Engelhardt
2007-05-30 5:54 ` Nitin Gupta
2007-05-30 8:31 ` Jan Engelhardt
2007-05-30 10:47 ` Nitin Gupta
2007-05-31 12:34 ` Nitin Gupta
2007-05-31 18:21 ` Satyam Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=465DA9B7.30700@yandex.ru \
--to=dedekind@yandex.ru \
--cc=dhazelton@enter.net \
--cc=dwmw2@infradead.org \
--cc=jloup@gzip.org \
--cc=linux-kernel@vger.kernel.org \
--cc=madler@alumni.caltech.edu \
--cc=mlj28@cam.ac.uk \
--cc=satyam.sharma@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox