From: Robert Hancock <hancockr@shaw.ca>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: linux-kernel@vger.kernel.org, crmotherboard@mailbox.cps.intel.com
Subject: Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)
Date: Wed, 30 May 2007 17:29:17 -0600 [thread overview]
Message-ID: <465E08CD.2080302@shaw.ca> (raw)
In-Reply-To: <fa.yz+v/A2zkJKIswF0Y4Mo4FxwnCI@ifi.uio.no>
Justin Piszcz wrote:
> That output looked nasty, attaching entries from syslog.
>
> Justin.
Here's your E820 memory map, from dmesg:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable)
BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved)
BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable)
BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS)
BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data)
BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS)
BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data)
BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable)
BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data)
BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable)
BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
so the usable memory ranges are:
0-572K
1MB-3317.55MB
3317.60MB-3317.75MB
3318.94MB-3318.945MB
3318.996MB-3319MB
4096MB-8896MB
and the MTRRs (from /proc/mtrr, from private email):
reg00: base=0x00000000 ( 0MB), size=2048MB: write-back, count=1
reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size= 256MB: write-back, count=1
reg03: base=0xcf800000 (3320MB), size= 8MB: uncachable, count=1
reg04: base=0xcf700000 (3319MB), size= 1MB: uncachable, count=1
reg05: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
reg06: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
reg07: base=0x220000000 (8704MB), size= 128MB: write-back, count=1
so the ranges mapped as cacheable are:
0-3319MB
4096-8832MB
leaving 64MB of memory at the top of RAM uncached. What do you want to
bet that something important (kernel code?) is getting loaded there..
So essentially it's a BIOS problem, it's not setting up the MTRRs
properly in order to map all of RAM as cacheable. As Andi says, complain
to Intel.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/
next parent reply other threads:[~2007-05-30 23:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.t8TZNHj4vrYcIs37jScT0oZl02s@ifi.uio.no>
[not found] ` <fa.nsJ3dX+uNBCD7bTYffkYm0DLnR4@ifi.uio.no>
[not found] ` <fa.lfTXDj3RBbaCLDUJJFzLVowMlxc@ifi.uio.no>
[not found] ` <fa.lrZMTvBB9xwYW1mcA0nyYFjB9qY@ifi.uio.no>
[not found] ` <fa.AIUKY82rbgpQ/AiIxhRL0fahxaQ@ifi.uio.no>
[not found] ` <fa.yz+v/A2zkJKIswF0Y4Mo4FxwnCI@ifi.uio.no>
2007-05-30 23:29 ` Robert Hancock [this message]
2007-05-31 4:56 ` Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG) Yinghai Lu
2007-05-31 0:57 Parag Warudkar
2007-05-31 4:38 ` Robert Hancock
2007-05-31 12:33 ` Justin Piszcz
2007-05-31 12:49 ` Parag Warudkar
2007-05-31 13:08 ` Justin Piszcz
2007-05-31 14:27 ` Robert Hancock
2007-05-31 18:44 ` Justin Piszcz
2007-06-01 16:33 ` Justin Piszcz
2007-06-01 17:57 ` Justin Piszcz
2007-06-01 18:10 ` Justin Piszcz
2007-06-01 20:56 ` Robert Hancock
[not found] <fa.4kEpre7NAj1mG6fooUMp/WVc8tg@ifi.uio.no>
2007-05-30 4:08 ` Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards Robert Hancock
2007-05-30 8:43 ` Justin Piszcz
2007-05-30 14:27 ` Robert Hancock
2007-05-30 14:33 ` Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG) Justin Piszcz
2007-05-30 14:36 ` Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=465E08CD.2080302@shaw.ca \
--to=hancockr@shaw.ca \
--cc=crmotherboard@mailbox.cps.intel.com \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox