Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Parag Warudkar]

Robert Hancock wrote:


> 0-3319MB
> 4096-8832MB
>
> leaving 64MB of memory at the top of RAM uncached. What do you want to
> bet that something important (kernel code?) is getting loaded there..
>
> So essentially it's a BIOS problem, it's not setting up the MTRRs
> properly in order to map all of RAM as cacheable. As Andi says, complain
> to Intel.
>

Could the BADRAM patch be useful for him?
http://rick.vanrein.org/linux/badram/download.html has 2.6.21 version.
It says it supports x86_64. May be using this patch he can exclude
that RAM from being used/accessed?

Parag
--

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Robert Hancock]

Parag Warudkar wrote:
> Robert Hancock wrote:
> 
> 
>> 0-3319MB
>> 4096-8832MB
>>
>> leaving 64MB of memory at the top of RAM uncached. What do you want to
>> bet that something important (kernel code?) is getting loaded there..
>>
>> So essentially it's a BIOS problem, it's not setting up the MTRRs
>> properly in order to map all of RAM as cacheable. As Andi says, complain
>> to Intel.
>>
> 
> Could the BADRAM patch be useful for him?
> http://rick.vanrein.org/linux/badram/download.html has 2.6.21 version.
> It says it supports x86_64. May be using this patch he can exclude
> that RAM from being used/accessed?

I think that mem=8832M would work as well, to make the kernel use only 
the memory that is marked cacheable. (It looks like this parameter takes 
the highest memory address we want the kernel to use, not the highest 
memory amount.)

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

On Wed, 30 May 2007, Robert Hancock wrote:

> Parag Warudkar wrote:
>> Robert Hancock wrote:
>> 
>> 
>>> 0-3319MB
>>> 4096-8832MB
>>> 
>>> leaving 64MB of memory at the top of RAM uncached. What do you want to
>>> bet that something important (kernel code?) is getting loaded there..
>>> 
>>> So essentially it's a BIOS problem, it's not setting up the MTRRs
>>> properly in order to map all of RAM as cacheable. As Andi says, complain
>>> to Intel.
>>> 
>> 
>> Could the BADRAM patch be useful for him?
>> http://rick.vanrein.org/linux/badram/download.html has 2.6.21 version.
>> It says it supports x86_64. May be using this patch he can exclude
>> that RAM from being used/accessed?
>
> I think that mem=8832M would work as well, to make the kernel use only the 
> memory that is marked cacheable. (It looks like this parameter takes the 
> highest memory address we want the kernel to use, not the highest memory 
> amount.)
>
> -- 
> Robert Hancock      Saskatoon, SK, Canada
> To email, remove "nospam" from hancockr@nospamshaw.ca
> Home Page: http://www.roberthancock.com/
>

Thanks for all the help, I have contacted Intel with this information and 
I am going to try and get an update today, I may also try that mem= 
parameter with 'almost 8gb' sometime as well.

Is this typical for Intel motherboards?  Do AMD motherboards fair any 
better?  Curious for any user reports of people using 8GB on desktop 
boards..?

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Parag Warudkar]

Robert Hancock wrote:
> I think that mem=8832M would work as well, to make the kernel use only 
> the memory that is marked cacheable. (It looks like this parameter 
> takes the highest memory address we want the kernel to use, not the 
> highest memory amount.)
>
Yep, and that would be much easier too.

I am curious though as this seems to be somewhat common a problem, could 
we make the kernel analyze which memory is not cacheable (it already 
knows this via MTRR) and not use that portion for anything? Plus may be 
warn the user to contact their BIOS vendor to correct the problem?

I think that would be possible - even if the kernel knows late that the 
memory was uncached we could migrate those pages in that region to 
someplace else?

Parag

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

On Thu, 31 May 2007, Parag Warudkar wrote:

> Robert Hancock wrote:
>> I think that mem=8832M would work as well, to make the kernel use only the 
>> memory that is marked cacheable. (It looks like this parameter takes the 
>> highest memory address we want the kernel to use, not the highest memory 
>> amount.)
>> 
> Yep, and that would be much easier too.
>
> I am curious though as this seems to be somewhat common a problem, could we 
> make the kernel analyze which memory is not cacheable (it already knows this 
> via MTRR) and not use that portion for anything? Plus may be warn the user to 
> contact their BIOS vendor to correct the problem?
>
> I think that would be possible - even if the kernel knows late that the 
> memory was uncached we could migrate those pages in that region to someplace 
> else?
>
> Parag
>

That is an excellent question and I wonder the same thing.  I also had 
this problem when I only used 4GB of ram and upgraded the (another 
motherboard, I have two) past version 1666P and I had no idea what was 
going on other than the BIOS did not work correctly.

In this case however it worked with 4GB with bios version 1612P but not 
with 8GB.  Is this the case of a buggy BIOS for the 965 chipset or do 
Intel boards have a lot of issues?

Justin.

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Robert Hancock]

Justin Piszcz wrote:
> On Thu, 31 May 2007, Parag Warudkar wrote:
> 
>> Robert Hancock wrote:
>>> I think that mem=8832M would work as well, to make the kernel use 
>>> only the memory that is marked cacheable. (It looks like this 
>>> parameter takes the highest memory address we want the kernel to use, 
>>> not the highest memory amount.)
>>>
>> Yep, and that would be much easier too.
>>
>> I am curious though as this seems to be somewhat common a problem, 
>> could we make the kernel analyze which memory is not cacheable (it 
>> already knows this via MTRR) and not use that portion for anything? 
>> Plus may be warn the user to contact their BIOS vendor to correct the 
>> problem?
>>
>> I think that would be possible - even if the kernel knows late that 
>> the memory was uncached we could migrate those pages in that region to 
>> someplace else?
>>
>> Parag
>>
> 
> That is an excellent question and I wonder the same thing.  I also had 
> this problem when I only used 4GB of ram and upgraded the (another 
> motherboard, I have two) past version 1666P and I had no idea what was 
> going on other than the BIOS did not work correctly.
> 
> In this case however it worked with 4GB with bios version 1612P but not 
> with 8GB.  Is this the case of a buggy BIOS for the 965 chipset or do 
> Intel boards have a lot of issues?

We could conceivably generate a warning if the MTRRs don't map all of 
the physical memory as write-back. Actually, conceivably we could 
actually go and fix up the MTRRs if we found them to be wrong according 
to the E820 memory map. That would be more complicated, however.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

On Thu, 31 May 2007, Robert Hancock wrote:

> Justin Piszcz wrote:
>> On Thu, 31 May 2007, Parag Warudkar wrote:
>> 
>>> Robert Hancock wrote:
>>>> I think that mem=8832M would work as well, to make the kernel use only 
>>>> the memory that is marked cacheable. (It looks like this parameter takes 
>>>> the highest memory address we want the kernel to use, not the highest 
>>>> memory amount.)
>>>> 
>>> Yep, and that would be much easier too.
>>> 
>>> I am curious though as this seems to be somewhat common a problem, could 
>>> we make the kernel analyze which memory is not cacheable (it already knows 
>>> this via MTRR) and not use that portion for anything? Plus may be warn the 
>>> user to contact their BIOS vendor to correct the problem?
>>> 
>>> I think that would be possible - even if the kernel knows late that the 
>>> memory was uncached we could migrate those pages in that region to 
>>> someplace else?
>>> 
>>> Parag
>>> 
>> 
>> That is an excellent question and I wonder the same thing.  I also had this 
>> problem when I only used 4GB of ram and upgraded the (another motherboard, 
>> I have two) past version 1666P and I had no idea what was going on other 
>> than the BIOS did not work correctly.
>> 
>> In this case however it worked with 4GB with bios version 1612P but not 
>> with 8GB.  Is this the case of a buggy BIOS for the 965 chipset or do Intel 
>> boards have a lot of issues?
>
> We could conceivably generate a warning if the MTRRs don't map all of the 
> physical memory as write-back. Actually, conceivably we could actually go and 
> fix up the MTRRs if we found them to be wrong according to the E820 memory 
> map. That would be more complicated, however.
>
> -- 
> Robert Hancock      Saskatoon, SK, Canada
> To email, remove "nospam" from hancockr@nospamshaw.ca
> Home Page: http://www.roberthancock.com/
>

Intel is working on a work-around/fix for this problem, they said I need 
to wait another day or so until it is completed.  I will let everyone know 
what the outcome is, hopefully it is a good fix :)  I totally agree 
however, a lot of 'weird' problems that some people may attribute to Linux 
are actually BIOS problems, I think warnings in the kernel would be a good 
idea, then they would not have to blame the kernel for BIOS issues :)

Justin.

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

On Wed, 30 May 2007, Robert Hancock wrote:

> Parag Warudkar wrote:
>> Robert Hancock wrote:
>> 
>> 
>>> 0-3319MB
>>> 4096-8832MB
>>> 
>>> leaving 64MB of memory at the top of RAM uncached. What do you want to
>>> bet that something important (kernel code?) is getting loaded there..
>>> 
>>> So essentially it's a BIOS problem, it's not setting up the MTRRs
>>> properly in order to map all of RAM as cacheable. As Andi says, complain
>>> to Intel.
>>> 
>> 
>> Could the BADRAM patch be useful for him?
>> http://rick.vanrein.org/linux/badram/download.html has 2.6.21 version.
>> It says it supports x86_64. May be using this patch he can exclude
>> that RAM from being used/accessed?
>
> I think that mem=8832M would work as well, to make the kernel use only the 
> memory that is marked cacheable. (It looks like this parameter takes the 
> highest memory address we want the kernel to use, not the highest memory 
> amount.)
>
> -- 
> Robert Hancock      Saskatoon, SK, Canada
> To email, remove "nospam" from hancockr@nospamshaw.ca
> Home Page: http://www.roberthancock.com/
>

Is 8832MB a typo?  8GB of memory is ~8192MB right?  Did you mean 8132MB 
or?  Intel wants me to flash my bios and reset everything to the defaults 
to see if it is still an issue, I'd prefer to try the mem= option first.

Justin.

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

On Fri, 1 Jun 2007, Justin Piszcz wrote:

>
>
> On Wed, 30 May 2007, Robert Hancock wrote:
>
>> Parag Warudkar wrote:
>>> Robert Hancock wrote:
>>> 
>>> 
>>>> 0-3319MB
>>>> 4096-8832MB
>>>> 
>>>> leaving 64MB of memory at the top of RAM uncached. What do you want to
>>>> bet that something important (kernel code?) is getting loaded there..
>>>> 
>>>> So essentially it's a BIOS problem, it's not setting up the MTRRs
>>>> properly in order to map all of RAM as cacheable. As Andi says, complain
>>>> to Intel.
>>>> 
>>> 
>>> Could the BADRAM patch be useful for him?
>>> http://rick.vanrein.org/linux/badram/download.html has 2.6.21 version.
>>> It says it supports x86_64. May be using this patch he can exclude
>>> that RAM from being used/accessed?
>> 
>> I think that mem=8832M would work as well, to make the kernel use only the 
>> memory that is marked cacheable. (It looks like this parameter takes the 
>> highest memory address we want the kernel to use, not the highest memory 
>> amount.)
>> 
>> -- 
>> Robert Hancock      Saskatoon, SK, Canada
>> To email, remove "nospam" from hancockr@nospamshaw.ca
>> Home Page: http://www.roberthancock.com/
>> 
>
> Is 8832MB a typo?  8GB of memory is ~8192MB right?  Did you mean 8132MB or? 
> Intel wants me to flash my bios and reset everything to the defaults to see 
> if it is still an issue, I'd prefer to try the mem= option first.
>
> Justin.
>

mem=8064M" [top: Mem:   7264144k total]
mem=8832M" [top: Mem:   8039820k total]

I am using 8832MB and it does not have the bug/slowness!  How did you 
calculate that from the MTRR output?

$ cat /proc/mtrr
reg00: base=0x00000000 (   0MB), size=2048MB: write-back, count=1
reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size= 256MB: write-back, count=1
reg03: base=0xcf800000 (3320MB), size=   8MB: uncachable, count=1
reg04: base=0xcf700000 (3319MB), size=   1MB: uncachable, count=1
reg05: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
reg06: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
reg07: base=0x220000000 (8704MB), size= 128MB: write-back, count=1

It sees 7.66GB now!

8039820 / 1024 / 1024
7.66GB

top - 13:56:48 up 3 min,  5 users,  load average: 0.12, 0.14, 0.06
Tasks: 163 total,   1 running, 162 sleeping,   0 stopped,   0 zombie
Cpu0  :  4.4%us,  1.4%sy,  0.2%ni, 89.7%id,  4.1%wa,  0.0%hi,  0.1%si,  0.0%st
Cpu1  :  0.1%us,  0.5%sy,  0.6%ni, 98.4%id,  0.3%wa,  0.0%hi,  0.0%si,  0.0%st
Cpu2  :  1.2%us,  0.3%sy,  0.1%ni, 97.9%id,  0.5%wa,  0.0%hi,  0.0%si,  0.0%st
Cpu3  :  0.2%us,  1.9%sy,  0.7%ni, 96.0%id,  1.1%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   8039820k total,  1039588k used,  7000232k free,     3552k buffers
Swap: 16787768k total,        0k used, 16787768k free,   141480k cached

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

On Fri, 1 Jun 2007, Justin Piszcz wrote:

>
>
> On Fri, 1 Jun 2007, Justin Piszcz wrote:
>
>> 
>> 
>> On Wed, 30 May 2007, Robert Hancock wrote:
>> 
>>> Parag Warudkar wrote:
>>>> Robert Hancock wrote:
>>>> 
>>>> 
>>>>> 0-3319MB
>>>>> 4096-8832MB
>>>>> 
>>>>> leaving 64MB of memory at the top of RAM uncached. What do you want to
>>>>> bet that something important (kernel code?) is getting loaded there..
>>>>> 
>>>>> So essentially it's a BIOS problem, it's not setting up the MTRRs
>>>>> properly in order to map all of RAM as cacheable. As Andi says, complain
>>>>> to Intel.
>>>>> 
>>>> 
>>>> Could the BADRAM patch be useful for him?
>>>> http://rick.vanrein.org/linux/badram/download.html has 2.6.21 version.
>>>> It says it supports x86_64. May be using this patch he can exclude
>>>> that RAM from being used/accessed?
>>> 
>>> I think that mem=8832M would work as well, to make the kernel use only the 
>>> memory that is marked cacheable. (It looks like this parameter takes the 
>>> highest memory address we want the kernel to use, not the highest memory 
>>> amount.)
>>> 
>>> -- 
>>> Robert Hancock      Saskatoon, SK, Canada
>>> To email, remove "nospam" from hancockr@nospamshaw.ca
>>> Home Page: http://www.roberthancock.com/
>>> 
>> 
>> Is 8832MB a typo?  8GB of memory is ~8192MB right?  Did you mean 8132MB or? 
>> Intel wants me to flash my bios and reset everything to the defaults to see 
>> if it is still an issue, I'd prefer to try the mem= option first.
>> 
>> Justin.
>> 
>
> mem=8064M" [top: Mem:   7264144k total]
> mem=8832M" [top: Mem:   8039820k total]
>
> I am using 8832MB and it does not have the bug/slowness!  How did you 
> calculate that from the MTRR output?
>
> $ cat /proc/mtrr
> reg00: base=0x00000000 (   0MB), size=2048MB: write-back, count=1
> reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
> reg02: base=0xc0000000 (3072MB), size= 256MB: write-back, count=1
> reg03: base=0xcf800000 (3320MB), size=   8MB: uncachable, count=1
> reg04: base=0xcf700000 (3319MB), size=   1MB: uncachable, count=1
> reg05: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
> reg06: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
> reg07: base=0x220000000 (8704MB), size= 128MB: write-back, count=1
>
> It sees 7.66GB now!
>
> 8039820 / 1024 / 1024
> 7.66GB
>
> top - 13:56:48 up 3 min,  5 users,  load average: 0.12, 0.14, 0.06
> Tasks: 163 total,   1 running, 162 sleeping,   0 stopped,   0 zombie
> Cpu0  :  4.4%us,  1.4%sy,  0.2%ni, 89.7%id,  4.1%wa,  0.0%hi,  0.1%si, 
> 0.0%st
> Cpu1  :  0.1%us,  0.5%sy,  0.6%ni, 98.4%id,  0.3%wa,  0.0%hi,  0.0%si, 
> 0.0%st
> Cpu2  :  1.2%us,  0.3%sy,  0.1%ni, 97.9%id,  0.5%wa,  0.0%hi,  0.0%si, 
> 0.0%st
> Cpu3  :  0.2%us,  1.9%sy,  0.7%ni, 96.0%id,  1.1%wa,  0.0%hi,  0.0%si, 
> 0.0%st
> Mem:   8039820k total,  1039588k used,  7000232k free,     3552k buffers
> Swap: 16787768k total,        0k used, 16787768k free,   141480k cached
>
>
>
>

Ahh here we go:

Justin Piszcz wrote:
> That output looked nasty, attaching entries from syslog.
>
> Justin.

Here's your E820 memory map, from dmesg:

BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable)
BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved)
BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable)
BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS)
BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data)
BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS)
BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data)
BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable)
BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data)
BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable)
BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

so the usable memory ranges are:

0-572K
1MB-3317.55MB
3317.60MB-3317.75MB
3318.94MB-3318.945MB
3318.996MB-3319MB
4096MB-8896MB

and the MTRRs (from /proc/mtrr, from private email):

reg00: base=0x00000000 (   0MB), size=2048MB: write-back, count=1
reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size= 256MB: write-back, count=1
reg03: base=0xcf800000 (3320MB), size=   8MB: uncachable, count=1
reg04: base=0xcf700000 (3319MB), size=   1MB: uncachable, count=1
reg05: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
reg06: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
reg07: base=0x220000000 (8704MB), size= 128MB: write-back, count=1

so the ranges mapped as cacheable are:

0-3319MB
4096-8832MB

leaving 64MB of memory at the top of RAM uncached. What do you want to
bet that something important (kernel code?) is getting loaded there..

So essentially it's a BIOS problem, it's not setting up the MTRRs
properly in order to map all of RAM as cacheable. As Andi says, complain
to Intel.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Robert Hancock]

Justin Piszcz wrote:
>> I think that mem=8832M would work as well, to make the kernel use only 
>> the memory that is marked cacheable. (It looks like this parameter 
>> takes the highest memory address we want the kernel to use, not the 
>> highest memory amount.)
>>
>> -- 
>> Robert Hancock      Saskatoon, SK, Canada
>> To email, remove "nospam" from hancockr@nospamshaw.ca
>> Home Page: http://www.roberthancock.com/
>>
> 
> Is 8832MB a typo?  8GB of memory is ~8192MB right?  Did you mean 8132MB 
> or?  Intel wants me to flash my bios and reset everything to the 
> defaults to see if it is still an issue, I'd prefer to try the mem= 
> option first.

I think 8832 should be right.. As far as I can tell, the number is the 
highest memory address, not the amount of memory, and there are some 
holes in the 3-4GB region.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Robert Hancock]

Justin Piszcz wrote:
> That output looked nasty, attaching entries from syslog.
> 
> Justin.

Here's your E820 memory map, from dmesg:

BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable)
BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved)
BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable)
BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS)
BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data)
BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS)
BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data)
BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable)
BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data)
BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable)
BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

so the usable memory ranges are:

0-572K
1MB-3317.55MB
3317.60MB-3317.75MB
3318.94MB-3318.945MB
3318.996MB-3319MB
4096MB-8896MB

and the MTRRs (from /proc/mtrr, from private email):

reg00: base=0x00000000 (   0MB), size=2048MB: write-back, count=1
reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size= 256MB: write-back, count=1
reg03: base=0xcf800000 (3320MB), size=   8MB: uncachable, count=1
reg04: base=0xcf700000 (3319MB), size=   1MB: uncachable, count=1
reg05: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
reg06: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
reg07: base=0x220000000 (8704MB), size= 128MB: write-back, count=1

so the ranges mapped as cacheable are:

0-3319MB
4096-8832MB

leaving 64MB of memory at the top of RAM uncached. What do you want to
bet that something important (kernel code?) is getting loaded there..

So essentially it's a BIOS problem, it's not setting up the MTRRs
properly in order to map all of RAM as cacheable. As Andi says, complain
to Intel.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Yinghai Lu]

On 5/30/07, Robert Hancock <hancockr@shaw.ca> wrote:
> Justin Piszcz wrote:
> > That output looked nasty, attaching entries from syslog.
> >
> > Justin.
>
> Here's your E820 memory map, from dmesg:
>
> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable)
> BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved)
> BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable)
> BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS)
> BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data)
> BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS)
> BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data)
> BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable)
> BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data)
> BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable)
> BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
>
> so the usable memory ranges are:
>
> 0-572K
> 1MB-3317.55MB
> 3317.60MB-3317.75MB
> 3318.94MB-3318.945MB
> 3318.996MB-3319MB
> 4096MB-8896MB
>
> and the MTRRs (from /proc/mtrr, from private email):
>
> reg00: base=0x00000000 (   0MB), size=2048MB: write-back, count=1
> reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1
> reg02: base=0xc0000000 (3072MB), size= 256MB: write-back, count=1
> reg03: base=0xcf800000 (3320MB), size=   8MB: uncachable, count=1
> reg04: base=0xcf700000 (3319MB), size=   1MB: uncachable, count=1
> reg05: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
> reg06: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
> reg07: base=0x220000000 (8704MB), size= 128MB: write-back, count=1
>
> so the ranges mapped as cacheable are:
>
> 0-3319MB
> 4096-8832MB
>
> leaving 64MB of memory at the top of RAM uncached. What do you want to
> bet that something important (kernel code?) is getting loaded there..
>
> So essentially it's a BIOS problem, it's not setting up the MTRRs
> properly in order to map all of RAM as cacheable. As Andi says, complain
> to Intel.

the BIOS used up of VAR MTRR ( = 8).

it supposed change to sth like
> reg00: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
> reg01: base=, size=64MB: uncachable, count=1
> reg02: base=, size=128MB: uncachable, count=1
> reg03: base=, size=512MB: uncachable, count=1
> reg04: base=0x100000000 (4096MB), size=4096MB: write-back, count=1
> reg05: base=0x200000000 (8192MB), size= 512MB: write-back, count=1
> reg06: base=0x220000000 (8704MB), size= 128MB: write-back, count=1
> reg07: base=(8832MB), size= 64MB: write-back, count=1

or you can set var mtrr and then use kexec to load another kernel.

AMD Rev F later cpu, will assume 4G above is write back, and even
without var mtrr for it.

YH

Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards.

[Robert Hancock]

Justin Piszcz wrote:
> Short Description of Problem:
> Linux 2.6.21.3 does not run properly with 8GB of ram on the Intel 965WH 
> motherboard.
> 
> Long Description of Problem:
> When I use 8GB of memory on my x86_64 system, CPU-bound processes are VERY
> slow, up to 36x slower than usual.  My temporary fix is force Linux to only
> use 4GB of memory, I am currently using mem=4096M.  I ran memtest86 and the
> memory is fine, not a single error.  I tried the following to mem= 1024, 
> 2048
> 4096 and blank "" to let the kernel use all 8GB of memory.  What is wrong
> with the kernel and how come it cannot use 8GB of memory without slowing 
> down
> all CPU-related processes to a snail-like pace?  There is something 
> horribly
> wrong here.
> 
> Specifications:
> Intel Motherboard: 965WH
> Linux Kernel: 2.6.21.3
> Distribution: Debian Testing x86_64
> GCC: gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
> Target: x86_64-linux-gnu
> 
> Tests:
> 
> 1. append line = 1024M
> top - 18:28:26 up 1 min,  4 users,  load average: 0.42, 0.17, 0.06
> Tasks: 157 total,   1 running, 156 sleeping,   0 stopped,   0 zombie
> Cpu(s):  0.0%us,  0.0%sy,  0.0%ni,100.0%id,  0.0%wa,  0.0%hi,  0.0%si,  
> 0.0%st
> Mem:   1027016k total,   964288k used,    62728k free,     1232k buffers
> Swap: 16787768k total,        0k used, 16787768k free,   105168k cached
> ---> STATUS: No problems, box is fine, no lag, etc..
> 
> 2. append line = 2048M
> top - 18:34:23 up 2 min,  2 users,  load average: 0.14, 0.14, 0.05
> Tasks: 147 total,   1 running, 146 sleeping,   0 stopped,   0 zombie
> Cpu(s):  1.7%us,  1.2%sy,  0.4%ni, 95.2%id,  1.5%wa,  0.0%hi,  0.0%si,  
> 0.0%st
> Mem:   2059696k total,   956324k used,  1103372k free,     1232k buffers
> Swap: 16787768k total,        0k used, 16787768k free,   102924k cached
> ---> STATUS: No problems, box is fine, no lag, etc..
> 
> 3. append line = 4096M
> top - 18:37:55 up 1 min,  1 user,  load average: 0.52, 0.19, 0.07
> Tasks: 143 total,   1 running, 142 sleeping,   0 stopped,   0 zombie
> Cpu(s):  2.9%us,  2.2%sy,  0.7%ni, 91.6%id,  2.6%wa,  0.0%hi,  0.0%si,  
> 0.0%st
> Mem:   3339536k total,   949792k used,  2389744k free,     1232k buffers
> Swap: 16787768k total,        0k used, 16787768k free,    99920k cached
> 
> $ time ssh p34 uptime
>  19:00:16 up 1 min,  1 user,  load average: 0.67, 0.18, 0.06
> real    0m0.159s
> user    0m0.013s
> sys     0m0.003s
> ---> STATUS: No problems, box is fine, no lag, etc..
> 
> 4. append line = "" (use all 8GB)
> 
> top - 18:52:50 up 9 min,  1 user,  load average: 2.88, 2.43, 1.41
> Tasks: 149 total,   3 running, 146 sleeping,   0 stopped,   0 zombie
> Cpu(s): 36.3%us,  2.2%sy, 10.3%ni, 50.8%id,  0.4%wa,  0.0%hi,  0.1%si,  
> 0.0%st
> Mem:   8104460k total,  1064416k used,  7040044k free,     3296k buffers
> Swap: 16787768k total,        0k used, 16787768k free,   201852k cached
> 
> $ ssh p34
> ssh: connect to host p34 port 22: Connection refused
> 
> Machine takes 5-10 minutes to boot, it acts like a 286 computer, about 8 
> minutes later:
> 
> $ time ssh p34 uptime  # 5 SECONDS!! 36x slower when using 8GB of RAM
>  18:51:39 up 8 min,  1 user,  load average: 2.74, 2.31, 1.30
> 
> real    0m5.757s
> user    0m0.015s
> sys     0m0.004s
> 
> The machine is VERY slow and this is on a gigabit network, I/O does not 
> seem to be affected but rather, CPU-bound processes.
> 
>   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
>  2483 root      25   0 25324 5292 1072 R   96  0.1   4:37.12 mailgraph
>  3604 logcheck  30  10  3408 1120  544 R   91  0.0   0:03.55 grep
> 
> These normally take seconds but when I use all 8GB of memory, it runs
> for a very long time.
> 
> Conclusion: For now, I will be using mem=4096M until someone can help me 
> understand what is happening here.  Can anyone offer any insight?
> 
> I found it interesting in make menuconfig on x86_64 there is no 4GB/64GB
> options in the kernel that I remember seeing in 32bit.

That's because that option is not applicable in 64-bit mode.

Can you send your full dmesg output from the 8GB bootup?

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards.

[Justin Piszcz]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 1557 bytes --]



On Tue, 29 May 2007, Robert Hancock wrote:

> Justin Piszcz wrote:
>> Short Description of Problem:
>> Linux 2.6.21.3 does not run properly with 8GB of ram on the Intel 965WH 
>> motherboard.
>> 
>> Long Description of Problem:
>> When I use 8GB of memory on my x86_64 system, CPU-bound processes are VERY
>> slow, up to 36x slower than usual.  My temporary fix is force Linux to only
>> use 4GB of memory, I am currently using mem=4096M.  I ran memtest86 and the
>> memory is fine, not a single error.  I tried the following to mem= 1024, 
>> 2048
>> 4096 and blank "" to let the kernel use all 8GB of memory.  What is wrong
>> with the kernel and how come it cannot use 8GB of memory without slowing 
>> down
>> all CPU-related processes to a snail-like pace?  There is something 
>> horribly
>> wrong here.
>> 
>> Conclusion: For now, I will be using mem=4096M until someone can help me 
>> understand what is happening here.  Can anyone offer any insight?
>> 
>> I found it interesting in make menuconfig on x86_64 there is no 4GB/64GB
>> options in the kernel that I remember seeing in 32bit.
>
> That's because that option is not applicable in 64-bit mode.
>
> Can you send your full dmesg output from the 8GB bootup?
>
> -- 
> Robert Hancock      Saskatoon, SK, Canada
> To email, remove "nospam" from hancockr@nospamshaw.ca
> Home Page: http://www.roberthancock.com/
>

Kernel dmesg attached from 8GB bootup.

Robert, how come the option is not applicable in 64-bit mode? If I want to 
use all 8GB of memory I need to run a 32-bit kernel?

Justin.

[-- Attachment #2: Type: TEXT/plain, Size: 31755 bytes --]

000-e0bfffff
[   49.640593] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   49.640760] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   49.640884] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[   49.641100] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   49.641236] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   49.641399] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   49.641510] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[   49.641674] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   49.641787] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[   49.641953] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   49.642061] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   49.642960] NET: Registered protocol family 2
[   49.652907] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   49.661992] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[   49.674484] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   49.678704] TCP: Hash tables configured (established 131072 bind 65536)
[   49.678792] TCP reno registered
[   49.734605] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   49.738786] SGI XFS with large block/inode numbers, no debug enabled
[   49.751315] io scheduler noop registered
[   49.751397] io scheduler anticipatory registered (default)
[   49.758137] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   49.758350] assign_interrupt_mode Found MSI capability
[   49.758914] Allocate Port Service[0000:00:1c.0:pcie00]
[   49.761087] Allocate Port Service[0000:00:1c.0:pcie02]
[   49.763372] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   49.763567] assign_interrupt_mode Found MSI capability
[   49.763851] Allocate Port Service[0000:00:1c.1:pcie00]
[   49.766170] Allocate Port Service[0000:00:1c.1:pcie02]
[   49.768444] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   49.768636] assign_interrupt_mode Found MSI capability
[   49.768903] Allocate Port Service[0000:00:1c.2:pcie00]
[   49.771250] Allocate Port Service[0000:00:1c.2:pcie02]
[   49.773535] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   49.773745] assign_interrupt_mode Found MSI capability
[   49.774010] Allocate Port Service[0000:00:1c.3:pcie00]
[   49.776336] Allocate Port Service[0000:00:1c.3:pcie02]
[   49.778728] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   49.778922] assign_interrupt_mode Found MSI capability
[   49.779166] Allocate Port Service[0000:00:1c.4:pcie00]
[   49.781407] Allocate Port Service[0000:00:1c.4:pcie02]
[   49.928519] lp: driver loaded but no devices found
[   49.930317] Real Time Clock Driver v1.12ac
[   49.932862] hpet_resources: 0xfed00000 is busy
[   49.932999] Linux agpgart interface v0.102 (c) Dave Jones
[   49.934495] agpgart: Detected an Intel 965G Chipset.
[   49.935555] agpgart: Detected 7676K stolen memory.
[   49.955435] agpgart: AGP aperture is 256M @ 0xd0000000
[   49.955998] [drm] Initialized drm 1.1.0 20060810
[   49.956245] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   49.959487] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   49.961590] parport: PnPBIOS parport detected.
[   49.961837] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[   50.047129] lp0: using parport0 (interrupt-driven).
[   50.059429] loop: loaded (max 8 devices)
[   50.059512] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   50.059601] Copyright (c) 1999-2006 Intel Corporation.
[   50.060611] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
[   50.060818] PCI: Setting latency timer of device 0000:00:19.0 to 64
[   50.078969] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43
[   50.156941] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   50.157413] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[   50.423850] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:00:cd:b1
[   50.574287] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[   50.574507] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[   50.825325] e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:29:37:db
[   50.854886] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
[   50.857929] netconsole: device eth0 not up yet, forcing it
[   50.900485] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270001c5be9f]
[   53.023002] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   53.519027] netconsole: network logging started
[   53.525561] ahci 0000:00:1f.2: version 2.1
[   53.525660] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[   54.527020] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   54.527094] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[   54.527265] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
[   54.529799] ata1: SATA max UDMA/133 cmd 0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
[   54.532861] ata2: SATA max UDMA/133 cmd 0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
[   54.535954] ata3: SATA max UDMA/133 cmd 0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
[   54.538921] ata4: SATA max UDMA/133 cmd 0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
[   54.540937] ata5: SATA max UDMA/133 cmd 0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
[   54.542961] ata6: SATA max UDMA/133 cmd 0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
[   54.543238] scsi0 : ahci
[   55.005900] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   55.008490] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[   55.008659] ata1.00: 145226112 sectors, multi 0: LBA48 
[   55.012548] ata1.00: configured for UDMA/133
[   55.012871] scsi1 : ahci
[   55.473558] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   55.476111] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[   55.476256] ata2.00: 145226112 sectors, multi 0: LBA48 
[   55.480168] ata2.00: configured for UDMA/133
[   55.480519] scsi2 : ahci
[   55.941187] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   55.942994] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   55.943170] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   55.945896] ata3.00: configured for UDMA/133
[   55.946135] scsi3 : ahci
[   56.407830] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   56.409600] ata4.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   56.409743] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   56.412464] ata4.00: configured for UDMA/133
[   56.412763] scsi4 : ahci
[   56.873467] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   56.875195] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   56.875362] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   56.877986] ata5.00: configured for UDMA/133
[   56.878375] scsi5 : ahci
[   57.337984] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   57.339683] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   57.339878] ata6.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   57.342457] ata6.00: configured for UDMA/133
[   57.344076] scsi 0:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
[   57.348418] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[   57.348753] sda: Write Protect is off
[   57.348867] sda: Mode Sense: 00 3a 00 00
[   57.349355] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.350304] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[   57.350641] sda: Write Protect is off
[   57.350751] sda: Mode Sense: 00 3a 00 00
[   57.351205] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.351384]  sda: sda1 sda2 sda3
[   57.364283] sd 0:0:0:0: Attached scsi disk sda
[   57.366414] scsi 1:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
[   57.369407] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[   57.369729] sdb: Write Protect is off
[   57.369842] sdb: Mode Sense: 00 3a 00 00
[   57.370199] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.371070] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[   57.371368] sdb: Write Protect is off
[   57.371494] sdb: Mode Sense: 00 3a 00 00
[   57.371868] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.372018]  sdb: sdb1 sdb2 sdb3
[   57.388421] sd 1:0:0:0: Attached scsi disk sdb
[   57.390640] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   57.393573] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB)
[   57.393863] sdc: Write Protect is off
[   57.393981] sdc: Mode Sense: 00 3a 00 00
[   57.394388] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.395180] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB)
[   57.395504] sdc: Write Protect is off
[   57.395617] sdc: Mode Sense: 00 3a 00 00
[   57.395987] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.396145]  sdc: sdc1
[   57.404704] sd 2:0:0:0: Attached scsi disk sdc
[   57.407759] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   57.410796] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB)
[   57.411106] sdd: Write Protect is off
[   57.411218] sdd: Mode Sense: 00 3a 00 00
[   57.411577] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.412452] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB)
[   57.412804] sdd: Write Protect is off
[   57.412921] sdd: Mode Sense: 00 3a 00 00
[   57.413290] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.413436]  sdd: sdd1
[   57.421753] sd 3:0:0:0: Attached scsi disk sdd
[   57.423890] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   57.426871] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB)
[   57.427230] sde: Write Protect is off
[   57.427345] sde: Mode Sense: 00 3a 00 00
[   57.427701] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.428551] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB)
[   57.428844] sde: Write Protect is off
[   57.428961] sde: Mode Sense: 00 3a 00 00
[   57.429379] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.429525]  sde: sde1
[   57.436029] sd 4:0:0:0: Attached scsi disk sde
[   57.438009] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   57.441059] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB)
[   57.441354] sdf: Write Protect is off
[   57.441493] sdf: Mode Sense: 00 3a 00 00
[   57.441895] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.442827] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB)
[   57.443125] sdf: Write Protect is off
[   57.443238] sdf: Mode Sense: 00 3a 00 00
[   57.443585] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   57.443772]  sdf: sdf1
[   57.454230] sd 5:0:0:0: Attached scsi disk sdf
[   57.458231] sata_sil24 0000:03:00.0: version 0.8
[   57.458330] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   57.458846] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   57.460520] ata7: SATA max UDMA/100 cmd 0xffffc20000108000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18
[   57.462550] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18
[   57.462791] scsi6 : sata_sil24
[   57.868886] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   57.870905] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   57.871050] ata7.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   57.874086] ata7.00: configured for UDMA/100
[   57.874254] scsi7 : sata_sil24
[   58.282187] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   58.284214] ata8.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   58.284358] ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   58.287439] ata8.00: configured for UDMA/100
[   58.288621] scsi 6:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   58.291911] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB)
[   58.292200] sdg: Write Protect is off
[   58.292324] sdg: Mode Sense: 00 3a 00 00
[   58.292667] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   58.293503] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB)
[   58.293832] sdg: Write Protect is off
[   58.293976] sdg: Mode Sense: 00 3a 00 00
[   58.294337] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   58.295071]  sdg: sdg1
[   58.302951] sd 6:0:0:0: Attached scsi disk sdg
[   58.306104] scsi 7:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   58.309130] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB)
[   58.309486] sdh: Write Protect is off
[   58.309600] sdh: Mode Sense: 00 3a 00 00
[   58.309956] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   58.310823] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB)
[   58.311115] sdh: Write Protect is off
[   58.311229] sdh: Mode Sense: 00 3a 00 00
[   58.311640] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   58.311790]  sdh: sdh1
[   58.320078] sd 7:0:0:0: Attached scsi disk sdh
[   58.321348] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[   58.321800] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   58.323417] ata9: SATA max UDMA/100 cmd 0xffffc20000110000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[   58.325432] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
[   58.325647] scsi8 : sata_sil24
[   58.733657] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   58.735434] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   58.735563] ata9.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   58.738156] ata9.00: configured for UDMA/100
[   58.738362] scsi9 : sata_sil24
[   59.144898] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   59.146631] ata10.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   59.146779] ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   59.149416] ata10.00: configured for UDMA/100
[   59.150639] scsi 8:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   59.153672] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB)
[   59.153966] sdi: Write Protect is off
[   59.154090] sdi: Mode Sense: 00 3a 00 00
[   59.154501] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   59.155336] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB)
[   59.155686] sdi: Write Protect is off
[   59.155798] sdi: Mode Sense: 00 3a 00 00
[   59.156159] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   59.156306]  sdi: sdi1
[   59.166753] sd 8:0:0:0: Attached scsi disk sdi
[   59.169023] scsi 9:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   59.171901] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB)
[   59.172223] sdj: Write Protect is off
[   59.172347] sdj: Mode Sense: 00 3a 00 00
[   59.172667] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   59.173502] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB)
[   59.173797] sdj: Write Protect is off
[   59.173908] sdj: Mode Sense: 00 3a 00 00
[   59.174294] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   59.174526]  sdj: sdj1
[   59.185042] sd 9:0:0:0: Attached scsi disk sdj
[   59.186240] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   59.186777] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   59.188276] ata11: SATA max UDMA/100 cmd 0xffffc20000118000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
[   59.190299] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
[   59.190596] scsi10 : sata_sil24
[   59.596870] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   59.598911] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   59.599074] ata11.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   59.602172] ata11.00: configured for UDMA/100
[   59.602343] scsi11 : sata_sil24
[   60.008363] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   60.010395] ata12.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
[   60.010565] ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   60.013634] ata12.00: configured for UDMA/100
[   60.014772] scsi 10:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   60.017135] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB)
[   60.017428] sdk: Write Protect is off
[   60.017578] sdk: Mode Sense: 00 3a 00 00
[   60.017958] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   60.018811] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB)
[   60.019098] sdk: Write Protect is off
[   60.019208] sdk: Mode Sense: 00 3a 00 00
[   60.019574] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   60.019766]  sdk: sdk1
[   60.027242] sd 10:0:0:0: Attached scsi disk sdk
[   60.029522] scsi 11:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
[   60.032343] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB)
[   60.032627] sdl: Write Protect is off
[   60.032746] sdl: Mode Sense: 00 3a 00 00
[   60.033132] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   60.033951] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB)
[   60.034305] sdl: Write Protect is off
[   60.034417] sdl: Mode Sense: 00 3a 00 00
[   60.034782] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   60.034928]  sdl: sdl1
[   60.042358] sd 11:0:0:0: Attached scsi disk sdl
[   60.044446] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   60.044876] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   60.046191] ata13: PATA max UDMA/100 cmd 0x0000000000015018 ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17
[   60.046482] scsi12 : pata_marvell
[   60.049123] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
[   60.357681] ata13.00: ATAPI, max UDMA/33
[   60.511908] ata13.00: configured for UDMA/33
[   60.514242] scsi 12:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5
[   60.522460] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[   60.522608] Uniform CD-ROM driver Revision: 3.20
[   60.524264] sr 12:0:0:0: Attached scsi CD-ROM sr0
[   60.526162] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   60.526488] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   60.526528] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   60.528219] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   60.528706] ehci_hcd 0000:00:1a.7: debug port 1
[   60.528858] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   60.528953] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625c00
[   60.532957] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   60.537324] usb usb1: configuration #1 chosen from 1 choice
[   60.539211] hub 1-0:1.0: USB hub found
[   60.539382] hub 1-0:1.0: 4 ports detected
[   60.643405] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   60.643725] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   60.643767] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   60.645247] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   60.645754] ehci_hcd 0000:00:1d.7: debug port 1
[   60.645895] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   60.646009] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800
[   60.650021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   60.654403] usb usb2: configuration #1 chosen from 1 choice
[   60.656306] hub 2-0:1.0: USB hub found
[   60.656477] hub 2-0:1.0: 6 ports detected
[   60.761478] USB Universal Host Controller Interface driver v3.0
[   60.762558] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   60.762838] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   60.762888] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   60.764431] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   60.764660] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
[   60.768583] usb usb3: configuration #1 chosen from 1 choice
[   60.770496] hub 3-0:1.0: USB hub found
[   60.770667] hub 3-0:1.0: 2 ports detected
[   60.875709] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[   60.875977] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   60.876018] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   60.877630] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   60.877881] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
[   60.881780] usb usb4: configuration #1 chosen from 1 choice
[   60.883704] hub 4-0:1.0: USB hub found
[   60.883873] hub 4-0:1.0: 2 ports detected
[   60.987952] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   60.988221] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   60.988261] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   60.989797] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[   60.990028] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
[   60.993964] usb usb5: configuration #1 chosen from 1 choice
[   60.995826] hub 5-0:1.0: USB hub found
[   60.996041] hub 5-0:1.0: 2 ports detected
[   61.100070] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   61.100346] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   61.100388] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   61.101896] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[   61.102183] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
[   61.106057] usb usb6: configuration #1 chosen from 1 choice
[   61.107967] hub 6-0:1.0: USB hub found
[   61.108142] hub 6-0:1.0: 2 ports detected
[   61.212093] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   61.212358] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   61.212412] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   61.214107] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[   61.214339] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[   61.218173] usb usb7: configuration #1 chosen from 1 choice
[   61.220096] hub 7-0:1.0: USB hub found
[   61.220270] hub 7-0:1.0: 2 ports detected
[   61.306473] usb 5-1: new low speed USB device using uhci_hcd and address 2
[   61.325345] Initializing USB Mass Storage driver...
[   61.473424] usb 5-1: configuration #1 chosen from 1 choice
[   61.480883] usbcore: registered new interface driver usb-storage
[   61.481015] USB Mass Storage support registered.
[   61.482491] usbcore: registered new interface driver hiddev
[   61.978902] hiddev96: USB HID v1.00 Device [        UPS] on usb-0000:00:1d.0-1
[   61.979246] usbcore: registered new interface driver usbhid
[   61.979406] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   61.982163] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   61.986899] serio: i8042 KBD port at 0x60,0x64 irq 1
[   61.987036] serio: i8042 AUX port at 0x60,0x64 irq 12
[   61.988264] mice: PS/2 mouse device common for all mice
[   61.993425] input: PC Speaker as /class/input/input0
[   61.993643] i2c /dev entries driver
[   61.995182] md: raid1 personality registered for level 1
[   62.012377] raid6: int64x1     66 MB/s
[   62.029504] raid6: int64x2     97 MB/s
[   62.047329] raid6: int64x4     35 MB/s
[   62.068731] raid6: int64x8     15 MB/s
[   62.085968] raid6: sse2x1     152 MB/s
[   62.102982] raid6: sse2x2     285 MB/s
[   62.119904] raid6: sse2x4     484 MB/s
[   62.120036] raid6: using algorithm sse2x4 (484 MB/s)
[   62.120177] md: raid6 personality registered for level 6
[   62.120321] md: raid5 personality registered for level 5
[   62.120435] md: raid4 personality registered for level 4
[   62.120579] raid5: automatically using best checksumming function: generic_sse
[   62.124860]    generic_sse:    56.000 MB/sec
[   62.124973] raid5: using function: generic_sse (56.000 MB/sec)
[   62.125489] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
[   62.131442] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   62.131831] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   62.281613] ALSA device list:
[   62.281730]   #0: HDA Intel at 0xe0620000 irq 22
[   62.281912] u32 classifier
[   62.282010]     Actions configured 
[   62.282147] nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
[   62.284736] ip_tables: (C) 2000-2006 Netfilter Core Team
[   62.285856] TCP cubic registered
[   62.286229] NET: Registered protocol family 1
[   62.286374] NET: Registered protocol family 17
[   62.654025] input: ImPS/2 Generic Wheel Mouse as /class/input/input1
[   62.681530] input: AT Translated Set 2 keyboard as /class/input/input2
[   62.695712] md: Autodetecting RAID arrays.
[   62.864377] md: autorun ...
[   62.864501] md: considering sdl1 ...
[   62.864888] md:  adding sdl1 ...
[   62.865262] md:  adding sdk1 ...
[   62.865596] md:  adding sdj1 ...
[   62.865951] md:  adding sdi1 ...
[   62.866304] md:  adding sdh1 ...
[   62.866641] md:  adding sdg1 ...
[   62.866992] md:  adding sdf1 ...
[   62.867346] md:  adding sde1 ...
[   62.867688] md:  adding sdd1 ...
[   62.868041] md:  adding sdc1 ...
[   62.868250] md: sdb3 has different UUID to sdl1
[   62.868441] md: sdb2 has different UUID to sdl1
[   62.868628] md: sdb1 has different UUID to sdl1
[   62.868818] md: sda3 has different UUID to sdl1
[   62.869005] md: sda2 has different UUID to sdl1
[   62.869255] md: sda1 has different UUID to sdl1
[   62.871018] md: created md3
[   62.871156] md: bind<sdc1>
[   62.871472] md: bind<sdd1>
[   62.871744] md: bind<sde1>
[   62.872062] md: bind<sdf1>
[   62.872524] md: bind<sdg1>
[   62.872869] md: bind<sdh1>
[   62.873158] md: bind<sdi1>
[   62.873521] md: bind<sdj1>
[   62.873823] md: bind<sdk1>
[   62.874123] md: bind<sdl1>
[   62.874573] md: running: <sdl1><sdk1><sdj1><sdi1><sdh1><sdg1><sdf1><sde1><sdd1><sdc1>
[   62.877780] raid5: device sdl1 operational as raid disk 2
[   62.877903] raid5: device sdk1 operational as raid disk 3
[   62.878059] raid5: device sdj1 operational as raid disk 0
[   62.878183] raid5: device sdi1 operational as raid disk 1
[   62.878341] raid5: device sdh1 operational as raid disk 6
[   62.878512] raid5: device sdg1 operational as raid disk 5
[   62.878668] raid5: device sdf1 operational as raid disk 4
[   62.878812] raid5: device sde1 operational as raid disk 7
[   62.878966] raid5: device sdd1 operational as raid disk 8
[   62.879088] raid5: device sdc1 operational as raid disk 9
[   62.899044] raid5: allocated 10562kB for md3
[   62.899164] raid5: raid level 5 set md3 active with 10 out of 10 devices, algorithm 2
[   62.899371] RAID5 conf printout:
[   62.899497]  --- rd:10 wd:10
[   62.899630]  disk 0, o:1, dev:sdj1
[   62.899762]  disk 1, o:1, dev:sdi1
[   62.899895]  disk 2, o:1, dev:sdl1
[   62.900025]  disk 3, o:1, dev:sdk1
[   62.900154]  disk 4, o:1, dev:sdf1
[   62.900316]  disk 5, o:1, dev:sdg1
[   62.900460]  disk 6, o:1, dev:sdh1
[   62.900606]  disk 7, o:1, dev:sde1
[   62.900720]  disk 8, o:1, dev:sdd1
[   62.900864]  disk 9, o:1, dev:sdc1
[   62.902910] md: considering sdb3 ...
[   62.903255] md:  adding sdb3 ...
[   62.903492] md: sdb2 has different UUID to sdb3
[   62.903696] md: sdb1 has different UUID to sdb3
[   62.904029] md:  adding sda3 ...
[   62.904213] md: sda2 has different UUID to sdb3
[   62.904428] md: sda1 has different UUID to sdb3
[   62.906017] md: created md2
[   62.906131] md: bind<sda3>
[   62.906521] md: bind<sdb3>
[   62.906856] md: running: <sdb3><sda3>
[   62.909833] raid1: raid set md2 active with 2 out of 2 mirrors
[   62.911031] md: considering sdb2 ...
[   62.911359] md:  adding sdb2 ...
[   62.911550] md: sdb1 has different UUID to sdb2
[   62.911945] md:  adding sda2 ...
[   62.912126] md: sda1 has different UUID to sdb2
[   62.914168] md: created md1
[   62.914280] md: bind<sda2>
[   62.914600] md: bind<sdb2>
[   62.914949] md: running: <sdb2><sda2>
[   62.917888] raid1: raid set md1 active with 2 out of 2 mirrors
[   62.919053] md: considering sdb1 ...
[   62.919382] md:  adding sdb1 ...
[   62.919735] md:  adding sda1 ...
[   62.919843] md: created md0
[   62.920029] md: bind<sda1>
[   62.920313] md: bind<sdb1>
[   62.920759] md: running: <sdb1><sda1>
[   62.923893] raid1: raid set md0 active with 2 out of 2 mirrors
[   62.925114] md: ... autorun DONE.
[   62.986800] UDF-fs: No VRS found
[   62.989910] Filesystem "md2": Disabling barriers, not supported by the underlying device
[   63.003218] XFS mounting filesystem md2
[   63.086036] Ending clean XFS mount for filesystem: md2
[   63.088268] VFS: Mounted root (xfs filesystem) readonly.
[   63.088664] Freeing unused kernel memory: 220k freed
[  140.336426] Adding 16787768k swap on /dev/md0.  Priority:-1 extents:1 across:16787768k
[  141.392860] Filesystem "md2": Disabling barriers, not supported by the underlying device
[  164.783967] kjournald starting.  Commit interval 5 seconds
[  164.798654] EXT3 FS on md1, internal journal
[  164.798884] EXT3-fs: mounted filesystem with ordered data mode.
[  164.813348] Filesystem "md3": Disabling barriers, not supported by the underlying device
[  164.820025] XFS mounting filesystem md3
[  165.142472] Ending clean XFS mount for filesystem: md3
[  214.133325] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[  246.230184] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT

Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards.

[Robert Hancock]

Justin Piszcz wrote:
> Kernel dmesg attached from 8GB bootup.

It looks like part of the start of the output was truncated..

> Robert, how come the option is not applicable in 64-bit mode? If I want 
> to use all 8GB of memory I need to run a 32-bit kernel?
> 
> Justin.
> 

Highmem and PAE (which are essentially what the 4GB/64GB memory options 
control) are not needed in 64-bit mode, since we can access the entire 
64-bit address space directly.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

Yes, you are correct, the netconsole output from another machine is shown 
below.  If we can access the memory directly, why is it so slow? :(  Am I 
the first person to try using 8 gigabytes of RAM on the 965 chipset?

On Wed, 30 May 2007, Robert Hancock wrote:

> Justin Piszcz wrote:
>> Kernel dmesg attached from 8GB bootup.
>
> It looks like part of the start of the output was truncated..
>
>> Robert, how come the option is not applicable in 64-bit mode? If I want to 
>> use all 8GB of memory I need to run a 32-bit kernel?
>> 
>> Justin.
>> 
>
> Highmem and PAE (which are essentially what the 4GB/64GB memory options 
> control) are not needed in 64-bit mode, since we can access the entire 64-bit 
> address space directly.
>
> -- 
> Robert Hancock      Saskatoon, SK, Canada
> To email, remove "nospam" from hancockr@nospamshaw.ca
> Home Page: http://www.roberthancock.com/
>

Here is the _FULL_ dmesg!  Thanks netconsole!

May 29 17:39:11 p34 [    0.000000] Linux version 2.6.21.3 (root@p34.internal.lan) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP Sun May 27 06:28:33 EDT 2007 
May 29 17:39:11 p34 [    0.000000] Command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 netconsole=4444@192.168.168.253/eth0,514@192.168.168.254/00:50:8D:ED:3C:E7 nmi_watchdog=1 
May 29 17:39:11 p34 [    0.000000] BIOS-provided physical RAM map: 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000000000000 - 000000000008f000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable) 
May 29 17:39:11 p34 [    0.000000] end_pfn_map = 2277376 
May 29 17:39:11 p34 [    0.000000] DMI 2.4 present. 
May 29 17:39:11 p34 [    0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) 
May 29 17:39:11 p34 [    0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL  DG965WH       64C       1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: FACP CF6FC000, 0074 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: DSDT CF6F7000, 40E9 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: FACS CF6A8000, 0040 
May 29 17:39:11 p34 [    0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: WDDT CF6F5000, 0040 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: MCFG CF6F4000, 003C (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: HPET CF6F2000, 0038 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6F0000, 01BC (r1 INTEL     CpuPm      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6EF000, 0175 (r1 INTEL   Cpu0Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A7000, 0175 (r1 INTEL   Cpu1Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A6000, 0175 (r1 INTEL   Cpu2Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A5000, 0175 (r1 INTEL   Cpu3Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] Zone PFN ranges: 
May 29 17:39:11 p34 [    0.000000]   DMA             0 ->     4096 
May 29 17:39:11 p34 [    0.000000]   DMA32        4096 ->  1048576 
May 29 17:39:11 p34 [    0.000000]   Normal    1048576 ->  2277376 
May 29 17:39:11 p34 [    0.000000] early_node_map[6] active PFN ranges 
May 29 17:39:11 p34 [    0.000000]     0:        0 ->      143 
May 29 17:39:11 p34 [    0.000000]     0:      256 ->   849295 
May 29 17:39:11 p34 [    0.000000]     0:   849308 ->   849491 
May 29 17:39:11 p34 [    0.000000]     0:   849649 ->   849650 
May 29 17:39:11 p34 [    0.000000]     0:   849663 ->   849664 
May 29 17:39:11 p34 [    0.000000]     0:  1048576 ->  2277376 
May 29 17:39:11 p34 [    0.000000] ACPI: PM-Timer IO Port: 0x408 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #0 (Bootup-CPU) 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #2 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #1 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #3 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) 
May 29 17:39:11 p34 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) 
May 29 17:39:11 p34 [    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 
May 29 17:39:11 p34 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 
May 29 17:39:11 p34 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 
May 29 17:39:11 p34 [    0.000000] Setting APIC routing to flat 
May 29 17:39:11 p34 [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 
May 29 17:39:11 p34 [    0.000000] Using ACPI (MADT) for SMP configuration information 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 000000000008f000 - 00000000000a0000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf58f000 - 00000000cf59c000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf653000 - 00000000cf6a5000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6a5000 - 00000000cf6a8000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6a8000 - 00000000cf6ef000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6ef000 - 00000000cf6f1000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6f2000 - 00000000cf6ff000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf700000 - 00000000d0000000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000d0000000 - 00000000fff00000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000fff00000 - 0000000100000000 
May 29 17:39:11 p34 [    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) 
May 29 17:39:11 p34 [    0.000000] PERCPU: Allocating 24512 bytes of per cpu data 
May 29 17:39:11 p34 [    0.000000] Built 1 zonelists.  Total pages: 2045692 
May 29 17:39:11 p34 [    0.000000] Kernel command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 netconsole=4444@192.168.168.253/eth0,514@192.168.168.254/00:50:8D:ED:3C:E7 nmi_watchdog=1 
May 29 17:39:11 p34 [    0.000000] netconsole: local port 4444 
May 29 17:39:11 p34 [    0.000000] netconsole: local IP 192.168.168.253 
May 29 17:39:11 p34 [    0.000000] netconsole: interface eth0 
May 29 17:39:11 p34 [    0.000000] netconsole: remote port 514 
May 29 17:39:11 p34 [    0.000000] netconsole: remote IP 192.168.168.254 
May 29 17:39:11 p34 [    0.000000] netconsole: remote ethernet address 00:50:8d:ed:3c:e7 
May 29 17:39:11 p34 [    0.000000] Initializing CPU#0 
May 29 17:39:11 p34 [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) 
May 29 17:39:11 p34 [   48.249507] time.c: Detected 2397.605 MHz processor. 
May 29 17:39:11 p34 [   48.250572] Console: colour VGA+ 80x25 
May 29 17:39:11 p34 [   48.258651] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) 
May 29 17:39:11 p34 [   48.264855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) 
May 29 17:39:11 p34 [   48.265963] Checking aperture... 
May 29 17:39:11 p34 [   48.266011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 
May 29 17:39:11 p34 [   48.302233] Placing software IO TLB between 0x95f6000 - 0xd5f6000 
May 29 17:39:11 p34 [   48.374061] Memory: 8103748k/9109504k available (3428k kernel code, 208464k reserved, 1270k data, 220k init) 
May 29 17:39:11 p34 [   48.434756] Calibrating delay using timer specific routine.. 4797.72 BogoMIPS (lpj=2398863) 
May 29 17:39:11 p34 [   48.435408] Mount-cache hash table entries: 256 
May 29 17:39:11 p34 [   48.436246] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.436307] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.436347] using mwait in idle threads. 
May 29 17:39:11 p34 [   48.436389] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.436430] CPU: Processor Core ID: 0 
May 29 17:39:11 p34 [   48.436474] CPU0: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.436526] Freeing SMP alternatives: 36k freed 
May 29 17:39:11 p34 [   48.436584] ACPI: Core revision 20070126 
May 29 17:39:11 p34 [   48.485666] activating NMI Watchdog ... done. 
May 29 17:39:11 p34 [   48.485786] Using local APIC timer interrupts. 
May 29 17:39:11 p34 [   48.527564] result 16650037 
May 29 17:39:11 p34 [   48.527642] Detected 16.650 MHz APIC timer. 
May 29 17:39:11 p34 [   48.529312] Booting processor 1/4 APIC 0x2 
May 29 17:39:11 p34 [   48.539943] Initializing CPU#1 
May 29 17:39:11 p34 [   48.600727] Calibrating delay using timer specific routine.. 4795.07 BogoMIPS (lpj=2397539) 
May 29 17:39:11 p34 [   48.600785] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.600822] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.600852] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.600879] CPU: Processor Core ID: 2 
May 29 17:39:11 p34 [   48.600914] CPU1: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.601348] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 
May 29 17:39:11 p34 [   48.601451] checking TSC synchronization [CPU#0 -> CPU#1]: passed. 
May 29 17:39:11 p34 [   48.623998] Booting processor 2/4 APIC 0x1 
May 29 17:39:11 p34 [   48.635015] Initializing CPU#2 
May 29 17:39:11 p34 [   48.694729] Calibrating delay using timer specific routine.. 4796.63 BogoMIPS (lpj=2398315) 
May 29 17:39:11 p34 [   48.694791] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.694829] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.694861] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.694891] CPU: Processor Core ID: 1 
May 29 17:39:11 p34 [   48.694928] CPU2: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.695368] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 
May 29 17:39:11 p34 [   48.695508] checking TSC synchronization [CPU#0 -> CPU#2]: passed. 
May 29 17:39:11 p34 [   48.717915] Booting processor 3/4 APIC 0x3 
May 29 17:39:11 p34 [   48.728547] Initializing CPU#3 
May 29 17:39:11 p34 [   48.788686] Calibrating delay using timer specific routine.. 4795.46 BogoMIPS (lpj=2397730) 
May 29 17:39:11 p34 [   48.788750] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.788787] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.788817] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.788846] CPU: Processor Core ID: 3 
May 29 17:39:11 p34 [   48.788882] CPU3: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.789318] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 
May 29 17:39:11 p34 [   48.789446] checking TSC synchronization [CPU#0 -> CPU#3]: passed. 
May 29 17:39:11 p34 [   48.810753] Brought up 4 CPUs 
May 29 17:39:11 p34 [   48.810941] testing NMI watchdog ... OK. 
May 29 17:39:11 p34 [   49.178287] migration_cost=156,193 
May 29 17:39:11 p34 [   49.182074] NET: Registered protocol family 16 
May 29 17:39:11 p34 [   49.183506] ACPI: bus type pci registered 
May 29 17:39:11 p34 [   49.183670] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved 
May 29 17:39:11 p34 [   49.183764] PCI: Not using MMCONFIG. 
May 29 17:39:11 p34 [   49.183847] PCI: Using configuration type 1 
May 29 17:39:11 p34 [   49.324928] ACPI: Interpreter enabled 
May 29 17:39:11 p34 [   49.325010] ACPI: Using IOAPIC for interrupt routing 
May 29 17:39:11 p34 [   49.518427] ACPI: PCI Root Bridge [PCI0] (0000:00) 
May 29 17:39:11 p34 [   49.523873] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO 
May 29 17:39:11 p34 [   49.523974] PCI quirk: region 0500-053f claimed by ICH6 GPIO 
May 29 17:39:11 p34 [   49.534492] PCI: Transparent bridge - 0000:00:1e.0 
May 29 17:39:11 p34 [   49.792346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.796475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) 
May 29 17:39:11 p34 [   49.800543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.804653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.808781] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) 
May 29 17:39:11 p34 [   49.812812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) 
May 29 17:39:11 p34 [   49.816864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) 
May 29 17:39:11 p34 [   49.820999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.824280] Linux Plug and Play Support v0.97 (c) Adam Belay 
May 29 17:39:11 p34 [   49.824569] pnp: PnP ACPI init 
May 29 17:39:11 p34 [   49.923406] pnp: PnP ACPI: found 12 devices 
May 29 17:39:11 p34 [   49.927655] SCSI subsystem initialized 
May 29 17:39:11 p34 [   49.935480] usbcore: registered new interface driver usbfs 
May 29 17:39:11 p34 [   49.936497] usbcore: registered new interface driver hub 
May 29 17:39:11 p34 [   49.939469] usbcore: registered new device driver usb 
May 29 17:39:11 p34 [   49.942750] PCI: Using ACPI for IRQ routing 
May 29 17:39:11 p34 [   49.942851] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report 
May 29 17:39:11 p34 [   49.944223] PCI-GART: No AMD northbridge found. 
May 29 17:39:11 p34 [   49.944929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 
May 29 17:39:11 p34 [   49.945145] hpet0: 3 64-bit timers, 14318180 Hz 
May 29 17:39:11 p34 [   49.946417] Time: tsc clocksource has been installed. 
May 29 17:39:11 p34 [   49.947517] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved 
May 29 17:39:11 p34 [   49.947640] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved 
May 29 17:39:11 p34 [   49.947785] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved 
May 29 17:39:11 p34 [   49.947943] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved 
May 29 17:39:11 p34 [   49.948125] pnp: 00:06: ioport range 0x500-0x53f has been reserved 
May 29 17:39:11 p34 [   49.948231] pnp: 00:06: ioport range 0x400-0x47f has been reserved 
May 29 17:39:11 p34 [   49.948433] pnp: 00:06: ioport range 0x680-0x6ff has been reserved 
May 29 17:39:11 p34 [   49.961379] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 
May 29 17:39:11 p34 [   50.015143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[e0084000-e00847ff]  Max Packet=[2048]  IR/IT contexts=[4/8] 
May 29 17:39:11 p34 [   50.016694] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 
May 29 17:39:11 p34 [   50.017108] PCI: Bridge: 0000:00:1c.0 
May 29 17:39:11 p34 [   50.017203]   IO window: disabled. 
May 29 17:39:11 p34 [   50.017295]   MEM window: e0700000-e07fffff 
May 29 17:39:11 p34 [   50.017381]   PREFETCH window: disabled. 
May 29 17:39:11 p34 [   50.017507] PCI: Bridge: 0000:00:1c.1 
May 29 17:39:11 p34 [   50.017598]   IO window: 5000-5fff 
May 29 17:39:11 p34 [   50.017689]   MEM window: e0400000-e04fffff 
May 29 17:39:11 p34 [   50.017776]   PREFETCH window: disabled. 
May 29 17:39:11 p34 [   50.017882] PCI: Bridge: 0000:00:1c.2 
May 29 17:39:11 p34 [   50.017966]   IO window: 4000-4fff 
May 29 17:39:11 p34 [   50.018071]   MEM window: e0300000-e03fffff 
May 29 17:39:11 p34 [   50.018189]   PREFETCH window: e0800000-e08fffff 
May 29 17:39:11 p34 [   50.018297] PCI: Bridge: 0000:00:1c.3 
May 29 17:39:11 p34 [   50.018382]   IO window: 3000-3fff 
May 29 17:39:11 p34 [   50.018504]   MEM window: e0200000-e02fffff 
May 29 17:39:11 p34 [   50.018598]   PREFETCH window: e0900000-e09fffff 
May 29 17:39:11 p34 [   50.018707] PCI: Bridge: 0000:00:1c.4 
May 29 17:39:11 p34 [   50.018792]   IO window: 2000-2fff 
May 29 17:39:11 p34 [   50.018885]   MEM window: e0100000-e01fffff 
May 29 17:39:11 p34 [   50.018976]   PREFETCH window: e0a00000-e0afffff 
May 29 17:39:11 p34 [   50.019121] PCI: Bridge: 0000:00:1e.0 
May 29 17:39:11 p34 [   50.019234]   IO window: 1000-1fff 
May 29 17:39:11 p34 [   50.019325]   MEM window: e0000000-e00fffff 
May 29 17:39:11 p34 [   50.019436]   PREFETCH window: e0b00000-e0bfffff 
May 29 17:39:11 p34 [   50.019625] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 
May 29 17:39:11 p34 [   50.019912] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 
May 29 17:39:11 p34 [   50.020251] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 
May 29 17:39:11 p34 [   50.020556] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 
May 29 17:39:11 p34 [   50.020829] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 
May 29 17:39:11 p34 [   50.022111] NET: Registered protocol family 2 
May 29 17:39:11 p34 [   50.032134] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) 
May 29 17:39:11 p34 [   50.041151] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) 
May 29 17:39:11 p34 [   50.053741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) 
May 29 17:39:11 p34 [   50.057942] TCP: Hash tables configured (established 131072 bind 65536) 
May 29 17:39:11 p34 [   50.058031] TCP reno registered 
May 29 17:39:11 p34 [   50.104079] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
May 29 17:39:11 p34 [   50.108290] SGI XFS with large block/inode numbers, no debug enabled 
May 29 17:39:11 p34 [   50.124796] io scheduler noop registered 
May 29 17:39:11 p34 [   50.124877] io scheduler anticipatory registered (default) 
May 29 17:39:11 p34 [   50.130760] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.133909] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.136992] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.139916] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.142907] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.217615] lp: driver loaded but no devices found 
May 29 17:39:11 p34 [   50.219124] Real Time Clock Driver v1.12ac 
May 29 17:39:11 p34 [   50.221782] Linux agpgart interface v0.102 (c) Dave Jones 
May 29 17:39:11 p34 [   50.223328] agpgart: Detected an Intel 965G Chipset. 
May 29 17:39:11 p34 [   50.224565] agpgart: Detected 7676K stolen memory. 
May 29 17:39:11 p34 [   50.243289] agpgart: AGP aperture is 256M @ 0xd0000000 
May 29 17:39:11 p34 [   50.243856] [drm] Initialized drm 1.1.0 20060810 
May 29 17:39:11 p34 [   50.244141] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 
May 29 17:39:11 p34 [   50.246322] [drm] Initialized i915 1.6.0 20060119 on minor 0 
May 29 17:39:11 p34 [   50.247415] parport: PnPBIOS parport detected. 
May 29 17:39:11 p34 [   50.247654] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] 
May 29 17:39:11 p34 [   50.331362] lp0: using parport0 (interrupt-driven). 
May 29 17:39:11 p34 [   50.341355] loop: loaded (max 8 devices) 
May 29 17:39:11 p34 [   50.341437] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI 
May 29 17:39:11 p34 [   50.341528] Copyright (c) 1999-2006 Intel Corporation. 
May 29 17:39:11 p34 [   50.342520] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 
May 29 17:39:11 p34 [   50.360685] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43 
May 29 17:39:11 p34 [   50.439132] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection 
May 29 17:39:11 p34 [   50.439655] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 
May 29 17:39:11 p34 [   50.705534] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:00:cd:b1 
May 29 17:39:11 p34 [   50.857482] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection 
May 29 17:39:11 p34 [   50.857724] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22 
May 29 17:39:11 p34 [   51.107171] e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:29:37:db 
May 29 17:39:11 p34 [   51.136221] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection 
May 29 17:39:11 p34 [   51.138251] netconsole: device eth0 not up yet, forcing it 
May 29 17:39:11 p34 [   53.180364] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX 
May 29 17:39:11 p34 [   53.683096] netconsole: network logging started 
May 29 17:39:11 p34 [   53.686923] ACPI: PCI Interrupt 0000:00:1f.2[A] -> 
May 29 17:39:11 p34 GSI 19 (level, low) -> IRQ 19 
May 29 17:39:12 p34 [   54.687783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode 
May 29 17:39:12 p34 [   54.687956] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
May 29 17:39:12 p34 [   54.690522] ata1: SATA max UDMA/133 cmd 0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.692552] ata2: SATA max UDMA/133 cmd 0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.694637] ata3: SATA max UDMA/133 cmd 0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.696669] ata4: SATA max UDMA/133 cmd 0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.698687] ata5: SATA max UDMA/133 cmd 0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.700726] ata6: SATA max UDMA/133 cmd 0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.701011] scsi0 : ahci 
May 29 17:39:13 p34 [   55.162816] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:13 p34 [   55.165434] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 
May 29 17:39:13 p34 [   55.165604] ata1.00: 145226112 sectors, multi 0: LBA48 
May 29 17:39:13 p34 [   55.169510] ata1.00: configured for UDMA/133 
May 29 17:39:13 p34 [   55.170050] scsi1 : ahci 
May 29 17:39:13 p34 [   55.632888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:13 p34 [   55.635466] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 
May 29 17:39:13 p34 [   55.635625] ata2.00: 145226112 sectors, multi 0: LBA48 
May 29 17:39:13 p34 [   55.639563] ata2.00: configured for UDMA/133 
May 29 17:39:13 p34 [   55.639885] scsi2 : ahci 
May 29 17:39:14 p34 [   56.100111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:14 p34 [   56.101908] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:14 p34 [   56.102086] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:14 p34 [   56.104825] ata3.00: configured for UDMA/133 
May 29 17:39:14 p34 [   56.105036] scsi3 : ahci 
May 29 17:39:14 p34 [   56.567476] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:14 p34 [   56.569281] ata4.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:14 p34 [   56.569423] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:14 p34 [   56.572150] ata4.00: configured for UDMA/133 
May 29 17:39:14 p34 [   56.572391] scsi4 : ahci 
May 29 17:39:15 p34 [   57.032365] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:15 p34 [   57.034115] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:15 p34 [   57.034245] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:15 p34 [   57.036865] ata5.00: configured for UDMA/133 
May 29 17:39:15 p34 [   57.037078] scsi5 : ahci 
May 29 17:39:15 p34 [   57.496550] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:15 p34 [   57.498270] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:15 p34 [   57.498438] ata6.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:15 p34 [   57.501093] ata6.00: configured for UDMA/133 
May 29 17:39:15 p34 [   57.502916] scsi 0:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.505120] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.505456] sda: Write Protect is off 
May 29 17:39:15 p34 [   57.506051] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.507023] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.507356] sda: Write Protect is off 
May 29 17:39:15 p34 [   57.507977] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.508155]  sda:
May 29 17:39:15 p34  sda1
May 29 17:39:15 p34  sda2
May 29 17:39:15 p34  sda3
May 29 17:39:15 p34 
May 29 17:39:15 p34 [   57.524234] sd 0:0:0:0: Attached scsi disk sda 
May 29 17:39:15 p34 [   57.526473] scsi 1:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.528478] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.528824] sdb: Write Protect is off 
May 29 17:39:15 p34 [   57.529324] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.530179] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.530511] sdb: Write Protect is off 
May 29 17:39:15 p34 [   57.531016] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.531162]  sdb:
May 29 17:39:15 p34  sdb1
May 29 17:39:15 p34  sdb2
May 29 17:39:15 p34  sdb3
May 29 17:39:15 p34 
May 29 17:39:15 p34 [   57.545063] sd 1:0:0:0: Attached scsi disk sdb 
May 29 17:39:15 p34 [   57.547103] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.549007] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.549322] sdc: Write Protect is off 
May 29 17:39:15 p34 [   57.549869] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.550710] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.551003] sdc: Write Protect is off 
May 29 17:39:15 p34 [   57.551505] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.551726]  sdc:
May 29 17:39:15 p34  sdc1
May 29 17:39:15 p34 
May 29 17:39:15 p34 [   57.565362] sd 2:0:0:0: Attached scsi disk sdc 
May 29 17:39:15 p34 [   57.567447] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.569384] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.569725] sdd: Write Protect is off 
May 29 17:39:15 p34 [   57.570218] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.571193] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.571500] sdd: Write Protect is off 
May 29 17:39:15 p34 [   57.572003] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.572162]  sdd:
May 29 17:39:15 p34  sdd1
May 29 17:39:15 p34 
May 29 17:39:15 p34 [   57.587442] sd 3:0:0:0: Attached scsi disk sdd 
May 29 17:39:15 p34 [   57.589470] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.591359] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.591632] sde: Write Protect is off 
May 29 17:39:15 p34 [   57.592147] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.593038] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.593357] sde: Write Protect is off 
May 29 17:39:15 p34 [   57.593826] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.594001]  sde:
May 29 17:39:15 p34  sde1
May 29 17:39:15 p34 
May 29 17:39:15 p34 [   57.605438] sd 4:0:0:0: Attached scsi disk sde 
May 29 17:39:15 p34 [   57.607617] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.609437] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.609770] sdf: Write Protect is off 
May 29 17:39:15 p34 [   57.610284] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.611221] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.611518] sdf: Write Protect is off 
May 29 17:39:15 p34 [   57.612049] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.612225]  sdf:
May 29 17:39:15 p34  sdf1
May 29 17:39:15 p34 
May 29 17:39:15 p34 [   57.623709] sd 5:0:0:0: Attached scsi disk sdf 
May 29 17:39:15 p34 [   57.626592] ACPI: PCI Interrupt 0000:03:00.0[A] -> 
May 29 17:39:15 p34 GSI 18 (level, low) -> IRQ 18 
May 29 17:39:15 p34 [   57.628562] ata7: SATA max UDMA/100 cmd 0xffffc20000108000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 
May 29 17:39:15 p34 [   57.629915] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 
May 29 17:39:15 p34 [   57.630185] scsi6 : sata_sil24 
May 29 17:39:16 p34 [   58.036965] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:16 p34 [   58.039003] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:16 p34 [   58.039153] ata7.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:16 p34 [   58.042162] ata7.00: configured for UDMA/100 
May 29 17:39:16 p34 [   58.042345] scsi7 : sata_sil24 
May 29 17:39:16 p34 [   58.448234] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:16 p34 [   58.450325] ata8.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:16 p34 [   58.450480] ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:16 p34 [   58.453526] ata8.00: configured for UDMA/100 
May 29 17:39:16 p34 [   58.454693] scsi 6:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:16 p34 [   58.456666] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.456964] sdg: Write Protect is off 
May 29 17:39:16 p34 [   58.458045] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.458913] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.459203] sdg: Write Protect is off 
May 29 17:39:16 p34 [   58.459754] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.459918]  sdg:
May 29 17:39:16 p34  sdg1
May 29 17:39:16 p34 
May 29 17:39:16 p34 [   58.474199] sd 6:0:0:0: Attached scsi disk sdg 
May 29 17:39:16 p34 [   58.476416] scsi 7:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:16 p34 [   58.478356] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.478711] sdh: Write Protect is off 
May 29 17:39:16 p34 [   58.479177] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.480075] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.480402] sdh: Write Protect is off 
May 29 17:39:16 p34 [   58.480928] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.481075]  sdh:
May 29 17:39:16 p34  sdh1
May 29 17:39:16 p34 
May 29 17:39:16 p34 [   58.495586] sd 7:0:0:0: Attached scsi disk sdh 
May 29 17:39:16 p34 [   58.496786] ACPI: PCI Interrupt 0000:04:00.0[A] -> 
May 29 17:39:16 p34 GSI 19 (level, low) -> IRQ 19 
May 29 17:39:16 p34 [   58.498258] ata9: SATA max UDMA/100 cmd 0xffffc20000110000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 
May 29 17:39:16 p34 [   58.499601] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 
May 29 17:39:16 p34 [   58.499831] scsi8 : sata_sil24 
May 29 17:39:16 p34 [   58.906766] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:16 p34 [   58.908540] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:16 p34 [   58.908698] ata9.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:16 p34 [   58.911323] ata9.00: configured for UDMA/100 
May 29 17:39:16 p34 [   58.911545] scsi9 : sata_sil24 
May 29 17:39:17 p34 [   59.317958] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:17 p34 [   59.319759] ata10.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:17 p34 [   59.319892] ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:17 p34 [   59.322532] ata10.00: configured for UDMA/100 
May 29 17:39:17 p34 [   59.323739] scsi 8:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:17 p34 [   59.325657] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.325964] sdi: Write Protect is off 
May 29 17:39:17 p34 [   59.326500] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.327388] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.327707] sdi: Write Protect is off 
May 29 17:39:17 p34 [   59.328203] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.328380]  sdi:
May 29 17:39:17 p34  sdi1
May 29 17:39:17 p34 
May 29 17:39:17 p34 [   59.340639] sd 8:0:0:0: Attached scsi disk sdi 
May 29 17:39:17 p34 [   59.342775] scsi 9:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:17 p34 [   59.344776] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.345103] sdj: Write Protect is off 
May 29 17:39:17 p34 [   59.345608] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.346489] SCSI device sdj: 293046768 5
May 29 17:39:17 p34 12-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.346850] sdj: Write Protect is off 
May 29 17:39:17 p34 [   59.347393] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.347552]  sdj:
May 29 17:39:17 p34  sdj1
May 29 17:39:17 p34 
May 29 17:39:17 p34 [   59.362148] sd 9:0:0:0: Attached scsi disk sdj 
May 29 17:39:17 p34 [   59.363387] ACPI: PCI Interrupt 0000:05:00.0[A] -> 
May 29 17:39:17 p34 GSI 16 (level, low) -> IRQ 16 
May 29 17:39:17 p34 [   59.365179] ata11: SATA max UDMA/100 cmd 0xffffc20000118000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 
May 29 17:39:17 p34 [   59.367143] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 
May 29 17:39:17 p34 [   59.367432] scsi10 : sata_sil24 
May 29 17:39:17 p34 [   59.775363] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:17 p34 [   59.777435] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:17 p34 [   59.777565] ata11.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:17 p34 [   59.780599] ata11.00: configured for UDMA/100 
May 29 17:39:17 p34 [   59.780798] scsi11 : sata_sil24 
May 29 17:39:18 p34 [   60.187580] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:18 p34 [   60.189625] ata12.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:18 p34 [   60.189769] ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:18 p34 [   60.192796] ata12.00: configured for UDMA/100 
May 29 17:39:18 p34 [   60.193974] scsi 10:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:18 p34 [   60.195832] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.196127] sdk: Write Protect is off 
May 29 17:39:18 p34 [   60.196614] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.197514] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.197845] sdk: Write Protect is off 
May 29 17:39:18 p34 [   60.198333] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.198507]  sdk:
May 29 17:39:18 p34  sdk1
May 29 17:39:18 p34 
May 29 17:39:18 p34 [   60.212748] sd 10:0:0:0: Attached scsi disk sdk 
May 29 17:39:18 p34 [   60.214934] scsi 11:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:18 p34 [   60.216923] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.217271] sdl: Write Protect is off 
May 29 17:39:18 p34 [   60.217774] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.218665] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.218974] sdl: Write Protect is off 
May 29 17:39:18 p34 [   60.219497] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.219671]  sdl:
May 29 17:39:18 p34  sdl1
May 29 17:39:18 p34 
May 29 17:39:18 p34 [   60.234367] sd 11:0:0:0: Attached scsi disk sdl 
May 29 17:39:18 p34 [   60.236317] ACPI: PCI Interrupt 0000:02:00.0[A] -> 
May 29 17:39:18 p34 GSI 17 (level, low) -> IRQ 17 
May 29 17:39:18 p34 [   60.237365] ata13: PATA max UDMA/100 cmd 0x0000000000015018 ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17 
May 29 17:39:18 p34 [   60.237631] scsi12 : pata_marvell 
May 29 17:39:18 p34 [   60.239266] BAR5:
May 29 17:39:18 p34 00:00 
May 29 17:39:18 p34 01:7F 
May 29 17:39:18 p34 02:22 
May 29 17:39:18 p34 03:CA 
May 29 17:39:18 p34 04:00 
May 29 17:39:18 p34 05:00 
May 29 17:39:18 p34 06:00 
May 29 17:39:18 p34 07:00 
May 29 17:39:18 p34 08:00 
May 29 17:39:18 p34 09:00 
May 29 17:39:18 p34 0A:00 
May 29 17:39:18 p34 0B:00 
May 29 17:39:18 p34 0C:01 
May 29 17:39:18 p34 0D:00 
May 29 17:39:18 p34 0E:00 
May 29 17:39:18 p34 0F:00 
May 29 17:39:18 p34 
May 29 17:39:18 p34 [   60.545828] ata13.00: ATAPI, max UDMA/33 
May 29 17:39:18 p34 [   60.701530] ata13.00: configured for UDMA/33 
May 29 17:39:18 p34 [   60.703942] scsi 12:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5 
May 29 17:39:18 p34 [   60.711411] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray 
May 29 17:39:18 p34 [   60.711545] Uniform CD-ROM driver Revision: 3.20 
May 29 17:39:18 p34 [   60.714694] ACPI: PCI Interrupt 0000:00:1a.7[C] -> 
May 29 17:39:18 p34 GSI 18 (level, low) -> IRQ 18 
May 29 17:39:18 p34 [   60.715083] ehci_hcd 0000:00:1a.7: EHCI Host Controller 
May 29 17:39:18 p34 [   60.716069] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 
May 29 17:39:18 p34 [   60.716562] ehci_hcd 0000:00:1a.7: debug port 1 
May 29 17:39:18 p34 [   60.716810] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625c00 
May 29 17:39:18 p34 [   60.720814] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 
May 29 17:39:18 p34 [   60.723647] usb usb1: configuration #1 chosen from 1 choice 
May 29 17:39:18 p34 [   60.724706] hub 1-0:1.0: USB hub found 
May 29 17:39:18 p34 [   60.724901] hub 1-0:1.0: 4 ports detected 
May 29 17:39:18 p34 [   60.829165] ACPI: PCI Interrupt 0000:00:1d.7[A] -> 
May 29 17:39:18 p34 GSI 23 (level, low) -> IRQ 23 
May 29 17:39:18 p34 [   60.829583] ehci_hcd 0000:00:1d.7: EHCI Host Controller 
May 29 17:39:18 p34 [   60.830451] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 
May 29 17:39:18 p34 [   60.830986] ehci_hcd 0000:00:1d.7: debug port 1 
May 29 17:39:18 p34 [   60.831229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800 
May 29 17:39:18 p34 [   60.835261] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 
May 29 17:39:18 p34 [   60.837971] usb usb2: configuration #1 chosen from 1 choice 
May 29 17:39:18 p34 [   60.839024] hub 2-0:1.0: USB hub found 
May 29 17:39:18 p34 [   60.839241] hub 2-0:1.0: 6 ports detected 
May 29 17:39:19 p34 [   60.942849] USB Universal Host Controller Interface driver v3.0 
May 29 17:39:19 p34 [   60.943912] ACPI: PCI Interrupt 0000:00:1a.0[A] -> 
May 29 17:39:19 p34 GSI 16 (level, low) -> IRQ 16 
May 29 17:39:19 p34 [   60.944250] uhci_hcd 0000:00:1a.0: UHCI Host Controller 
May 29 17:39:19 p34 [   60.945081] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 
May 29 17:39:19 p34 [   60.945338] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 
May 29 17:39:19 p34 [   60.948562] usb usb3: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   60.949639] hub 3-0:1.0: USB hub found 
May 29 17:39:19 p34 [   60.949832] hub 3-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.053768] ACPI: PCI Interrupt 0000:00:1a.1[B] -> 
May 29 17:39:19 p34 GSI 21 (level, low) -> IRQ 21 
May 29 17:39:19 p34 [   61.054098] uhci_hcd 0000:00:1a.1: UHCI Host Controller 
May 29 17:39:19 p34 [   61.054937] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 
May 29 17:39:19 p34 [   61.055187] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0 
May 29 17:39:19 p34 [   61.058179] usb usb4: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.059320] hub 4-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.059500] hub 4-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.162594] ACPI: PCI Interrupt 0000:00:1d.0[A] -> 
May 29 17:39:19 p34 GSI 23 (level, low) -> IRQ 23 
May 29 17:39:19 p34 [   61.162944] uhci_hcd 0000:00:1d.0: UHCI Host Controller 
May 29 17:39:19 p34 [   61.163751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 
May 29 17:39:19 p34 [   61.164039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 
May 29 17:39:19 p34 [   61.166996] usb usb5: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.168132] hub 5-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.168320] hub 5-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.271253] ACPI: PCI Interrupt 0000:00:1d.1[B] -> 
May 29 17:39:19 p34 GSI 19 (level, low) -> IRQ 19 
May 29 17:39:19 p34 [   61.271587] uhci_hcd 0000:00:1d.1: UHCI Host Controller 
May 29 17:39:19 p34 [   61.272501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 
May 29 17:39:19 p34 [   61.272757] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 
May 29 17:39:19 p34 [   61.275754] usb usb6: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.276869] hub 6-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.277042] hub 6-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.379999] ACPI: PCI Interrupt 0000:00:1d.2[C] -> 
May 29 17:39:19 p34 GSI 18 (level, low) -> IRQ 18 
May 29 17:39:19 p34 [   61.380331] uhci_hcd 0000:00:1d.2: UHCI Host Controller 
May 29 17:39:19 p34 [   61.381211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 
May 29 17:39:19 p34 [   61.381464] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 
May 29 17:39:19 p34 [   61.385027] usb usb7: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.386139] hub 7-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.386313] hub 7-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.477697] usb 5-1: new low speed USB device using uhci_hcd and address 2 
May 29 17:39:19 p34 [   61.489915] Initializing USB Mass Storage driver... 
May 29 17:39:19 p34 [   61.641966] usb 5-1: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.647974] usbcore: registered new interface driver usb-storage 
May 29 17:39:19 p34 [   61.648124] USB Mass Storage support registered. 
May 29 17:39:19 p34 [   61.649681] usbcore: registered new interface driver hiddev 
May 29 17:39:20 p34 [   62.146211] 
May 29 17:39:20 p34 hiddev96
May 29 17:39:20 p34 : USB HID v1.00 Device [        UPS] on usb-0000:00:1d.0-1 
May 29 17:39:20 p34 [   62.146611] usbcore: registered new interface driver usbhid 
May 29 17:39:20 p34 [   62.146747] drivers/usb/input/hid-core.c: v2.6:USB HID core driver 
May 29 17:39:20 p34 [   62.148329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 
May 29 17:39:20 p34 [   62.152574] serio: i8042 KBD port at 0x60,0x64 irq 1 
May 29 17:39:20 p34 [   62.152739] serio: i8042 AUX port at 0x60,0x64 irq 12 
May 29 17:39:20 p34 [   62.153709] mice: PS/2 mouse device common for all mice 
May 29 17:39:20 p34 [   62.157353] input: PC Speaker as /class/input/input0 
May 29 17:39:20 p34 [   62.157569] i2c /dev entries driver 
May 29 17:39:20 p34 [   62.158424] md: raid1 personality registered for level 1 
May 29 17:39:20 p34 [   62.174745] raid6: int64x1     62 MB/s 
May 29 17:39:20 p34 [   62.178692] input: AT Translated Set 2 keyboard as /class/input/input1 
May 29 17:39:20 p34 [   62.192019] raid6: int64x2     89 MB/s 
May 29 17:39:20 p34 [   62.209023] raid6: int64x4     31 MB/s 
May 29 17:39:20 p34 [   62.225777] raid6: int64x8     11 MB/s 
May 29 17:39:20 p34 [   62.242854] raid6: sse2x1     148 MB/s 
May 29 17:39:20 p34 [   62.259636] raid6: sse2x2     269 MB/s 
May 29 17:39:20 p34 [   62.276650] raid6: sse2x4     460 MB/s 
May 29 17:39:20 p34 [   62.276789] raid6: using algorithm sse2x4 (460 MB/s) 
May 29 17:39:20 p34 [   62.276937] md: raid6 personality registered for level 6 
May 29 17:39:20 p34 [   62.277053] md: raid5 personality registered for level 5 
May 29 17:39:20 p34 [   62.277191] md: raid4 personality registered for level 4 
May 29 17:39:20 p34 [   62.277346] raid5: automatically using best checksumming function: generic_sse 
May 29 17:39:20 p34 [   62.281657]    generic_sse:    56.000 MB/sec 
May 29 17:39:20 p34 [   62.281777] raid5: using function: generic_sse (56.000 MB/sec) 
May 29 17:39:20 p34 [   62.282244] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). 
May 29 17:39:20 p34 [   62.288220] ACPI: PCI Interrupt 0000:00:1b.0[A] -> 
May 29 17:39:20 p34 GSI 22 (level, low) -> IRQ 22 
May 29 17:39:20 p34 [   62.839554] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 
May 29 17:39:21 p34 [   63.412487] hda_intel: azx_get_response timeout, switching to polling mode... 
May 29 17:39:21 p34 [   63.435772] ALSA device list: 
May 29 17:39:21 p34 [   63.435876]   #0: HDA Intel at 0xe0620000 irq 22 
May 29 17:39:21 p34 [   63.436031] u32 classifier 
May 29 17:39:21 p34 [   63.436148]     Actions configured 
May 29 17:39:21 p34 [   63.436279] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) 
May 29 17:39:21 p34 [   63.438882] ip_tables: (C) 2000-2006 Netfilter Core Team 
May 29 17:39:21 p34 [   63.439995] TCP cubic registered 
May 29 17:39:21 p34 [   63.440386] NET: Registered protocol family 1 
May 29 17:39:21 p34 [   63.440507] NET: Registered protocol family 17 
May 29 17:39:21 p34 [   63.445397] md: Autodetecting RAID arrays. 
May 29 17:39:21 p34 [   63.572955] md: autorun ... 
May 29 17:39:21 p34 [   63.573095] md: considering sdl1 ... 
May 29 17:39:21 p34 [   63.573596] md:  adding sdl1 ... 
May 29 17:39:21 p34 [   63.573924] md:  adding sdk1 ... 
May 29 17:39:21 p34 [   63.574312] md:  adding sdj1 ... 
May 29 17:39:21 p34 [   63.574664] md:  adding sdi1 ... 
May 29 17:39:21 p34 [   63.575005] md:  adding sdh1 ... 
May 29 17:39:21 p34 [   63.575396] md:  adding sdg1 ... 
May 29 17:39:21 p34 [   63.575754] md:  adding sdf1 ... 
May 29 17:39:21 p34 [   63.576089] md:  adding sde1 ... 
May 29 17:39:21 p34 [   63.576472] md:  adding sdd1 ... 
May 29 17:39:21 p34 [   63.576824] md:  adding sdc1 ... 
May 29 17:39:21 p34 [   63.577015] md: sdb3 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577204] md: sdb2 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577446] md: sdb1 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577647] md: sda3 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577846] md: sda2 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.578043] md: sda1 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.579527] md: created md3 
May 29 17:39:21 p34 [   63.579639] md: bind<sdc1> 
May 29 17:39:21 p34 [   63.579956] md: bind<sdd1> 
May 29 17:39:21 p34 [   63.580329] md: bind<sde1> 
May 29 17:39:21 p34 [   63.580627] md: bind<sdf1> 
May 29 17:39:21 p34 [   63.580933] md: bind<sdg1> 
May 29 17:39:21 p34 [   63.581229] md: bind<sdh1> 
May 29 17:39:21 p34 [   63.581624] md: bind<sdi1> 
May 29 17:39:21 p34 [   63.582103] md: bind<sdj1> 
May 29 17:39:21 p34 [   63.582436] md: bind<sdk1> 
May 29 17:39:21 p34 [   63.582776] md: bind<sdl1> 
May 29 17:39:21 p34 [   63.583100] md: running: 
May 29 17:39:21 p34 
May 29 17:39:21 p34 [   63.586384] raid5: device sdl1 operational as raid disk 2 
May 29 17:39:21 p34 [   63.586509] raid5: device sdk1 operational as raid disk 3 
May 29 17:39:21 p34 [   63.586656] raid5: device sdj1 operational as raid disk 0 
May 29 17:39:21 p34 [   63.586829] raid5: device sdi1 operational as raid disk 1 
May 29 17:39:21 p34 [   63.586973] raid5: device sdh1 operational as raid disk 6 
May 29 17:39:21 p34 [   63.587122] raid5: device sdg1 operational as raid disk 5 
May 29 17:39:21 p34 [   63.587317] raid5: device sdf1 operational as raid disk 4 
May 29 17:39:21 p34 [   63.587459] raid5: device sde1 operational as raid disk 7 
May 29 17:39:21 p34 [   63.587603] raid5: device sdd1 operational as raid disk 8 
May 29 17:39:21 p34 [   63.587758] raid5: device sdc1 operational as raid disk 9 
May 29 17:39:21 p34 [   63.608186] raid5: allocated 10562kB for md3 
May 29 17:39:21 p34 [   63.608334] raid5: raid level 5 set md3 active with 10 out of 10 devices, algorithm 2 
May 29 17:39:21 p34 [   63.608519] RAID5 conf printout: 
May 29 17:39:21 p34 [   63.608639]  --- rd:10 wd:10 
May 29 17:39:21 p34 [   63.608767]  disk 0, o:1, dev:sdj1 
May 29 17:39:21 p34 [   63.608897]  disk 1, o:1, dev:sdi1 
May 29 17:39:21 p34 [   63.609073]  disk 2, o:1, dev:sdl1 
May 29 17:39:21 p34 [   63.609184]  disk 3, o:1, dev:sdk1 
May 29 17:39:21 p34 [   63.609346]  disk 4, o:1, dev:sdf1 
May 29 17:39:21 p34 [   63.609507]  disk 5, o:1, dev:sdg1 
May 29 17:39:21 p34 [   63.609640]  disk 6, o:1, dev:sdh1 
May 29 17:39:21 p34 [   63.609771]  disk 7, o:1, dev:sde1 
May 29 17:39:21 p34 [   63.609903]  disk 8, o:1, dev:sdd1 
May 29 17:39:21 p34 [   63.610040]  disk 9, o:1, dev:sdc1 
May 29 17:39:21 p34 [   63.612460] md: considering sdb3 ... 
May 29 17:39:21 p34 [   63.612835] md:  adding sdb3 ... 
May 29 17:39:21 p34 [   63.613027] md: sdb2 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.613220] md: sdb1 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.613589] md:  adding sda3 ... 
May 29 17:39:21 p34 [   63.613801] md: sda2 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.613997] md: sda1 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.615606] md: created md2 
May 29 17:39:21 p34 [   63.615720] md: bind<sda3> 
May 29 17:39:21 p34 [   63.616094] md: bind<sdb3> 
May 29 17:39:21 p34 [   63.616575] md: running: 
May 29 17:39:21 p34 
May 29 17:39:21 p34 [   63.619316] raid1: raid set md2 active with 2 out of 2 mirrors 
May 29 17:39:21 p34 [   63.620513] md: considering sdb2 ... 
May 29 17:39:21 p34 [   63.620870] md:  adding sdb2 ... 
May 29 17:39:21 p34 [   63.621082] md: sdb1 has different UUID to sdb2 
May 29 17:39:21 p34 [   63.621465] md:  adding sda2 ... 
May 29 17:39:21 p34 [   63.621646] md: sda1 has different UUID to sdb2 
May 29 17:39:21 p34 [   63.623619] md: created md1 
May 29 17:39:21 p34 [   63.623733] md: bind<sda2> 
May 29 17:39:21 p34 [   63.624059] md: bind<sdb2> 
May 29 17:39:21 p34 [   63.624439] md: running: 
May 29 17:39:21 p34 
May 29 17:39:21 p34 [   63.627438] raid1: raid set md1 active with 2 out of 2 mirrors 
May 29 17:39:21 p34 [   63.628555] md: considering sdb1 ... 
May 29 17:39:21 p34 [   63.628883] md:  adding sdb1 ... 
May 29 17:39:21 p34 [   63.629302] md:  adding sda1 ... 
May 29 17:39:21 p34 [   63.629411] md: created md0 
May 29 17:39:21 p34 [   63.629576] md: bind<sda1> 
May 29 17:39:21 p34 [   63.629882] md: bind<sdb1> 
May 29 17:39:21 p34 [   63.630233] md: running: 
May 29 17:39:21 p34 
May 29 17:39:21 p34 [   63.633438] raid1: raid set md0 active with 2 out of 2 mirrors 
May 29 17:39:21 p34 [   63.634598] md: ... autorun DONE. 
May 29 17:39:21 p34 [   63.695456] UDF-fs: No VRS found 
May 29 17:39:21 p34 [   63.699158] Filesystem "md2": Disabling barriers, not supported by the underlying device 
May 29 17:39:21 p34 [   63.713776] XFS mounting filesystem md2 
May 29 17:39:21 p34 [   63.813743] VFS: Mounted root (xfs filesystem) readonly. 
May 29 17:39:21 p34 [   63.814115] Freeing unused kernel memory: 220k freed 
May 29 17:40:39 p34 [  141.447304] Adding 16787768k swap on /dev/md0.  Priority:-1 extents:1 across:16787768k 
May 29 17:40:40 p34 [  142.497721] Filesystem "md2": Disabling barriers, not supported by the underlying device 
May 29 17:41:04 p34 [  166.716017] kjournald starting.  Commit interval 5 seconds 
May 29 17:41:04 p34 [  166.729375] EXT3 FS on md1, 
May 29 17:41:04 p34 internal journal 
May 29 17:41:04 p34 [  166.729663] EXT3-fs: mounted filesystem with ordered data mode. 
May 29 17:41:04 p34 [  166.751799] Filesystem "md3": Disabling barriers, not supported by the underlying device 
May 29 17:41:04 p34 [  166.758717] XFS mounting filesystem md3 
May 29 17:41:54 p34 [  216.821357] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX 
May 29 17:42:29 p34 [  251.481399] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT 
May 29 17:46:42 p34 [  504.074171] mtrr: no more MTRRs available

Re: Case: 7454422: Re: Kernel 2.6.21.3 does not work with 8GB of RAM on Intel 965WH motherboards. (FULL DMESG)

[Justin Piszcz]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 57320 bytes --]

That output looked nasty, attaching entries from syslog.

Justin.

On Wed, 30 May 2007, Justin Piszcz wrote:

> Yes, you are correct, the netconsole output from another machine is shown 
> below.  If we can access the memory directly, why is it so slow? :(  Am I the 
> first person to try using 8 gigabytes of RAM on the 965 chipset?
>
> On Wed, 30 May 2007, Robert Hancock wrote:
>
>> Justin Piszcz wrote:
>>> Kernel dmesg attached from 8GB bootup.
>> 
>> It looks like part of the start of the output was truncated..
>> 
>>> Robert, how come the option is not applicable in 64-bit mode? If I want to 
>>> use all 8GB of memory I need to run a 32-bit kernel?
>>> 
>>> Justin.
>>> 
>> 
>> Highmem and PAE (which are essentially what the 4GB/64GB memory options 
>> control) are not needed in 64-bit mode, since we can access the entire 
>> 64-bit address space directly.
>> 
>> -- 
>> Robert Hancock      Saskatoon, SK, Canada
>> To email, remove "nospam" from hancockr@nospamshaw.ca
>> Home Page: http://www.roberthancock.com/
>> 
>
> Here is the _FULL_ dmesg!  Thanks netconsole!
>
> May 29 17:39:11 p34 [    0.000000] Linux version 2.6.21.3 
> (root@p34.internal.lan) (gcc version 4.1.2 20061115 (prerelease) (Debian 
> 4.1.1-21)) #4 SMP Sun May 27 06:28:33 EDT 2007 May 29 17:39:11 p34 [ 
> 0.000000] Command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 
> netconsole=4444@192.168.168.253/eth0,514@192.168.168.254/00:50:8D:ED:3C:E7 
> nmi_watchdog=1 May 29 17:39:11 p34 [    0.000000] BIOS-provided physical RAM 
> map: May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000000000000 - 
> 000000000008f000 (usable) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 
> 000000000008f000 - 00000000000a0000 (reserved) May 29 17:39:11 p34 [ 
> 0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 29 
> 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf58f000 
> (usable) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf58f000 - 
> 00000000cf59c000 (reserved) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 
> 00000000cf59c000 - 00000000cf653000 (usable) May 29 17:39:11 p34 [ 
> 0.000000]  BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS) May 29 
> 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 
> (ACPI data) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6a8000 - 
> 00000000cf6ef000 (ACPI NVS) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 
> 00000000cf6ef000 - 00000000cf6f1000 (ACPI data) May 29 17:39:11 p34 [ 
> 0.000000]  BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) May 29 
> 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 
> (ACPI data) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6ff000 - 
> 00000000cf700000 (usable) May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 
> 00000000cf700000 - 00000000d0000000 (reserved) May 29 17:39:11 p34 [ 
> 0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) May 29 
> 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 
> (usable) May 29 17:39:11 p34 [    0.000000] end_pfn_map = 2277376 May 29 
> 17:39:11 p34 [    0.000000] DMI 2.4 present. May 29 17:39:11 p34 [ 
> 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) May 29 17:39:11 p34 [ 
> 0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL  DG965WH       64C 
> 1000013) May 29 17:39:11 p34 [    0.000000] ACPI: FACP CF6FC000, 0074 (r1 
> INTEL  DG965WH       64C MSFT  1000013) May 29 17:39:11 p34 [    0.000000] 
> ACPI: DSDT CF6F7000, 40E9 (r1 INTEL  DG965WH       64C MSFT  1000013) May 29 
> 17:39:11 p34 [    0.000000] ACPI: FACS CF6A8000, 0040 May 29 17:39:11 p34 [ 
> 0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL  DG965WH       64C MSFT 
> 1000013) May 29 17:39:11 p34 [    0.000000] ACPI: WDDT CF6F5000, 0040 (r1 
> INTEL  DG965WH       64C MSFT  1000013) May 29 17:39:11 p34 [    0.000000] 
> ACPI: MCFG CF6F4000, 003C (r1 INTEL  DG965WH       64C MSFT  1000013) May 29 
> 17:39:11 p34 [    0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL  DG965WH 
> 64C MSFT  1000013) May 29 17:39:11 p34 [    0.000000] ACPI: HPET CF6F2000, 
> 0038 (r1 INTEL  DG965WH       64C MSFT  1000013) May 29 17:39:11 p34 [ 
> 0.000000] ACPI: SSDT CF6F0000, 01BC (r1 INTEL     CpuPm      64C MSFT 
> 1000013) May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6EF000, 0175 (r1 
> INTEL   Cpu0Ist      64C MSFT  1000013) May 29 17:39:11 p34 [    0.000000] 
> ACPI: SSDT CF6A7000, 0175 (r1 INTEL   Cpu1Ist      64C MSFT  1000013) May 29 
> 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A6000, 0175 (r1 INTEL   Cpu2Ist 
> 64C MSFT  1000013) May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A5000, 
> 0175 (r1 INTEL   Cpu3Ist      64C MSFT  1000013) May 29 17:39:11 p34 [ 
> 0.000000] Zone PFN ranges: May 29 17:39:11 p34 [    0.000000]   DMA 
> 0 ->     4096 May 29 17:39:11 p34 [    0.000000]   DMA32        4096 -> 
> 1048576 May 29 17:39:11 p34 [    0.000000]   Normal    1048576 ->  2277376 
> May 29 17:39:11 p34 [    0.000000] early_node_map[6] active PFN ranges May 29 
> 17:39:11 p34 [    0.000000]     0:        0 ->      143 May 29 17:39:11 p34 [ 
> 0.000000]     0:      256 ->   849295 May 29 17:39:11 p34 [    0.000000] 
> 0:   849308 ->   849491 May 29 17:39:11 p34 [    0.000000]     0:   849649 -> 
> 849650 May 29 17:39:11 p34 [    0.000000]     0:   849663 ->   849664 May 29 
> 17:39:11 p34 [    0.000000]     0:  1048576 ->  2277376 May 29 17:39:11 p34 [ 
> 0.000000] ACPI: PM-Timer IO Port: 0x408 May 29 17:39:11 p34 [    0.000000] 
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 29 17:39:11 p34 [ 
> 0.000000] Processor #0 (Bootup-CPU) May 29 17:39:11 p34 [    0.000000] ACPI: 
> LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) May 29 17:39:11 p34 [ 
> 0.000000] Processor #2 May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC 
> (acpi_id[0x02] lapic_id[0x01] enabled) May 29 17:39:11 p34 [    0.000000] 
> Processor #1 May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x04] 
> lapic_id[0x03] enabled) May 29 17:39:11 p34 [    0.000000] Processor #3 May 
> 29 17:39:11 p34 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl 
> lint[0x1]) May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] 
> dfl dfl lint[0x1]) May 29 17:39:11 p34 [    0.000000] ACPI: IOAPIC (id[0x02] 
> address[0xfec00000] gsi_base[0]) May 29 17:39:11 p34 [    0.000000] 
> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 May 29 17:39:11 p34 [ 
> 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 29 
> 17:39:11 p34 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 
> high level) May 29 17:39:11 p34 [    0.000000] Setting APIC routing to flat 
> May 29 17:39:11 p34 [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 
> May 29 17:39:11 p34 [    0.000000] Using ACPI (MADT) for SMP configuration 
> information May 29 17:39:11 p34 [    0.000000] Nosave address range: 
> 000000000008f000 - 00000000000a0000 May 29 17:39:11 p34 [    0.000000] Nosave 
> address range: 00000000000a0000 - 00000000000e0000 May 29 17:39:11 p34 [ 
> 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 May 29 
> 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf58f000 - 
> 00000000cf59c000 May 29 17:39:11 p34 [    0.000000] Nosave address range: 
> 00000000cf653000 - 00000000cf6a5000 May 29 17:39:11 p34 [    0.000000] Nosave 
> address range: 00000000cf6a5000 - 00000000cf6a8000 May 29 17:39:11 p34 [ 
> 0.000000] Nosave address range: 00000000cf6a8000 - 00000000cf6ef000 May 29 
> 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6ef000 - 
> 00000000cf6f1000 May 29 17:39:11 p34 [    0.000000] Nosave address range: 
> 00000000cf6f2000 - 00000000cf6ff000 May 29 17:39:11 p34 [    0.000000] Nosave 
> address range: 00000000cf700000 - 00000000d0000000 May 29 17:39:11 p34 [ 
> 0.000000] Nosave address range: 00000000d0000000 - 00000000fff00000 May 29 
> 17:39:11 p34 [    0.000000] Nosave address range: 00000000fff00000 - 
> 0000000100000000 May 29 17:39:11 p34 [    0.000000] Allocating PCI resources 
> starting at d4000000 (gap: d0000000:2ff00000) May 29 17:39:11 p34 [ 
> 0.000000] PERCPU: Allocating 24512 bytes of per cpu data May 29 17:39:11 p34 
> [    0.000000] Built 1 zonelists.  Total pages: 2045692 May 29 17:39:11 p34 [ 
> 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 
> netconsole=4444@192.168.168.253/eth0,514@192.168.168.254/00:50:8D:ED:3C:E7 
> nmi_watchdog=1 May 29 17:39:11 p34 [    0.000000] netconsole: local port 4444 
> May 29 17:39:11 p34 [    0.000000] netconsole: local IP 192.168.168.253 May 
> 29 17:39:11 p34 [    0.000000] netconsole: interface eth0 May 29 17:39:11 p34 
> [    0.000000] netconsole: remote port 514 May 29 17:39:11 p34 [    0.000000] 
> netconsole: remote IP 192.168.168.254 May 29 17:39:11 p34 [    0.000000] 
> netconsole: remote ethernet address 00:50:8d:ed:3c:e7 May 29 17:39:11 p34 [ 
> 0.000000] Initializing CPU#0 May 29 17:39:11 p34 [    0.000000] PID hash 
> table entries: 4096 (order: 12, 32768 bytes) May 29 17:39:11 p34 [ 
> 48.249507] time.c: Detected 2397.605 MHz processor. May 29 17:39:11 p34 [ 
> 48.250572] Console: colour VGA+ 80x25 May 29 17:39:11 p34 [   48.258651] 
> Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) May 29 
> 17:39:11 p34 [   48.264855] Inode-cache hash table entries: 524288 (order: 
> 10, 4194304 bytes) May 29 17:39:11 p34 [   48.265963] Checking aperture... 
> May 29 17:39:11 p34 [   48.266011] PCI-DMA: Using software bounce buffering 
> for IO (SWIOTLB) May 29 17:39:11 p34 [   48.302233] Placing software IO TLB 
> between 0x95f6000 - 0xd5f6000 May 29 17:39:11 p34 [   48.374061] Memory: 
> 8103748k/9109504k available (3428k kernel code, 208464k reserved, 1270k data, 
> 220k init) May 29 17:39:11 p34 [   48.434756] Calibrating delay using timer 
> specific routine.. 4797.72 BogoMIPS (lpj=2398863) May 29 17:39:11 p34 [ 
> 48.435408] Mount-cache hash table entries: 256 May 29 17:39:11 p34 [ 
> 48.436246] CPU: L1 I cache: 32K, L1 D cache: 32K May 29 17:39:11 p34 [ 
> 48.436307] CPU: L2 cache: 4096K May 29 17:39:11 p34 [   48.436347] using 
> mwait in idle threads. May 29 17:39:11 p34 [   48.436389] CPU: Physical 
> Processor ID: 0 May 29 17:39:11 p34 [   48.436430] CPU: Processor Core ID: 0 
> May 29 17:39:11 p34 [   48.436474] CPU0: Thermal monitoring enabled (TM2) May 
> 29 17:39:11 p34 [   48.436526] Freeing SMP alternatives: 36k freed May 29 
> 17:39:11 p34 [   48.436584] ACPI: Core revision 20070126 May 29 17:39:11 p34 
> [   48.485666] activating NMI Watchdog ... done. May 29 17:39:11 p34 [ 
> 48.485786] Using local APIC timer interrupts. May 29 17:39:11 p34 [ 
> 48.527564] result 16650037 May 29 17:39:11 p34 [   48.527642] Detected 16.650 
> MHz APIC timer. May 29 17:39:11 p34 [   48.529312] Booting processor 1/4 APIC 
> 0x2 May 29 17:39:11 p34 [   48.539943] Initializing CPU#1 May 29 17:39:11 p34 
> [   48.600727] Calibrating delay using timer specific routine.. 4795.07 
> BogoMIPS (lpj=2397539) May 29 17:39:11 p34 [   48.600785] CPU: L1 I cache: 
> 32K, L1 D cache: 32K May 29 17:39:11 p34 [   48.600822] CPU: L2 cache: 4096K 
> May 29 17:39:11 p34 [   48.600852] CPU: Physical Processor ID: 0 May 29 
> 17:39:11 p34 [   48.600879] CPU: Processor Core ID: 2 May 29 17:39:11 p34 [ 
> 48.600914] CPU1: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 
> 48.601348] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 May 29 
> 17:39:11 p34 [   48.601451] checking TSC synchronization [CPU#0 -> CPU#1]: 
> passed. May 29 17:39:11 p34 [   48.623998] Booting processor 2/4 APIC 0x1 May 
> 29 17:39:11 p34 [   48.635015] Initializing CPU#2 May 29 17:39:11 p34 [ 
> 48.694729] Calibrating delay using timer specific routine.. 4796.63 BogoMIPS 
> (lpj=2398315) May 29 17:39:11 p34 [   48.694791] CPU: L1 I cache: 32K, L1 D 
> cache: 32K May 29 17:39:11 p34 [   48.694829] CPU: L2 cache: 4096K May 29 
> 17:39:11 p34 [   48.694861] CPU: Physical Processor ID: 0 May 29 17:39:11 p34 
> [   48.694891] CPU: Processor Core ID: 1 May 29 17:39:11 p34 [   48.694928] 
> CPU2: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [   48.695368] 
> Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 May 29 17:39:11 
> p34 [   48.695508] checking TSC synchronization [CPU#0 -> CPU#2]: passed. May 
> 29 17:39:11 p34 [   48.717915] Booting processor 3/4 APIC 0x3 May 29 17:39:11 
> p34 [   48.728547] Initializing CPU#3 May 29 17:39:11 p34 [   48.788686] 
> Calibrating delay using timer specific routine.. 4795.46 BogoMIPS 
> (lpj=2397730) May 29 17:39:11 p34 [   48.788750] CPU: L1 I cache: 32K, L1 D 
> cache: 32K May 29 17:39:11 p34 [   48.788787] CPU: L2 cache: 4096K May 29 
> 17:39:11 p34 [   48.788817] CPU: Physical Processor ID: 0 May 29 17:39:11 p34 
> [   48.788846] CPU: Processor Core ID: 3 May 29 17:39:11 p34 [   48.788882] 
> CPU3: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [   48.789318] 
> Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 May 29 17:39:11 
> p34 [   48.789446] checking TSC synchronization [CPU#0 -> CPU#3]: passed. May 
> 29 17:39:11 p34 [   48.810753] Brought up 4 CPUs May 29 17:39:11 p34 [ 
> 48.810941] testing NMI watchdog ... OK. May 29 17:39:11 p34 [   49.178287] 
> migration_cost=156,193 May 29 17:39:11 p34 [   49.182074] NET: Registered 
> protocol family 16 May 29 17:39:11 p34 [   49.183506] ACPI: bus type pci 
> registered May 29 17:39:11 p34 [   49.183670] PCI: BIOS Bug: MCFG area at 
> f0000000 is not E820-reserved May 29 17:39:11 p34 [   49.183764] PCI: Not 
> using MMCONFIG. May 29 17:39:11 p34 [   49.183847] PCI: Using configuration 
> type 1 May 29 17:39:11 p34 [   49.324928] ACPI: Interpreter enabled May 29 
> 17:39:11 p34 [   49.325010] ACPI: Using IOAPIC for interrupt routing May 29 
> 17:39:11 p34 [   49.518427] ACPI: PCI Root Bridge [PCI0] (0000:00) May 29 
> 17:39:11 p34 [   49.523873] PCI quirk: region 0400-047f claimed by ICH6 
> ACPI/GPIO/TCO May 29 17:39:11 p34 [   49.523974] PCI quirk: region 0500-053f 
> claimed by ICH6 GPIO May 29 17:39:11 p34 [   49.534492] PCI: Transparent 
> bridge - 0000:00:1e.0 May 29 17:39:11 p34 [   49.792346] ACPI: PCI Interrupt 
> Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) May 29 17:39:11 p34 [   49.796475] 
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) May 29 17:39:11 
> p34 [   49.800543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) 
> May 29 17:39:11 p34 [   49.804653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 
> 5 7 9 10 *11 12) May 29 17:39:11 p34 [   49.808781] ACPI: PCI Interrupt Link 
> [LNKE] (IRQs 3 4 5 7 *9 10 11 12) May 29 17:39:11 p34 [   49.812812] ACPI: 
> PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) May 29 17:39:11 p34 [ 
> 49.816864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) May 29 
> 17:39:11 p34 [   49.820999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 
> 10 *11 12) May 29 17:39:11 p34 [   49.824280] Linux Plug and Play Support 
> v0.97 (c) Adam Belay May 29 17:39:11 p34 [   49.824569] pnp: PnP ACPI init 
> May 29 17:39:11 p34 [   49.923406] pnp: PnP ACPI: found 12 devices May 29 
> 17:39:11 p34 [   49.927655] SCSI subsystem initialized May 29 17:39:11 p34 [ 
> 49.935480] usbcore: registered new interface driver usbfs May 29 17:39:11 p34 
> [   49.936497] usbcore: registered new interface driver hub May 29 17:39:11 
> p34 [   49.939469] usbcore: registered new device driver usb May 29 17:39:11 
> p34 [   49.942750] PCI: Using ACPI for IRQ routing May 29 17:39:11 p34 [ 
> 49.942851] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
> post a report May 29 17:39:11 p34 [   49.944223] PCI-GART: No AMD northbridge 
> found. May 29 17:39:11 p34 [   49.944929] hpet0: at MMIO 0xfed00000, IRQs 2, 
> 8, 0 May 29 17:39:11 p34 [   49.945145] hpet0: 3 64-bit timers, 14318180 Hz 
> May 29 17:39:11 p34 [   49.946417] Time: tsc clocksource has been installed. 
> May 29 17:39:11 p34 [   49.947517] pnp: 00:01: iomem range 
> 0xf0000000-0xf7ffffff has been reserved May 29 17:39:11 p34 [   49.947640] 
> pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved May 29 
> 17:39:11 p34 [   49.947785] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has 
> been reserved May 29 17:39:11 p34 [   49.947943] pnp: 00:01: iomem range 
> 0xfed18000-0xfed18fff has been reserved May 29 17:39:11 p34 [   49.948125] 
> pnp: 00:06: ioport range 0x500-0x53f has been reserved May 29 17:39:11 p34 [ 
> 49.948231] pnp: 00:06: ioport range 0x400-0x47f has been reserved May 29 
> 17:39:11 p34 [   49.948433] pnp: 00:06: ioport range 0x680-0x6ff has been 
> reserved May 29 17:39:11 p34 [   49.961379] ACPI: PCI Interrupt 
> 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 May 29 17:39:11 p34 [ 
> 50.015143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] 
> MMIO=[e0084000-e00847ff]  Max Packet=[2048]  IR/IT contexts=[4/8] May 29 
> 17:39:11 p34 [   50.016694] PCI: Ignore bogus resource 6 [0:0] of 
> 0000:00:02.0 May 29 17:39:11 p34 [   50.017108] PCI: Bridge: 0000:00:1c.0 May 
> 29 17:39:11 p34 [   50.017203]   IO window: disabled. May 29 17:39:11 p34 [ 
> 50.017295]   MEM window: e0700000-e07fffff May 29 17:39:11 p34 [   50.017381] 
> PREFETCH window: disabled. May 29 17:39:11 p34 [   50.017507] PCI: Bridge: 
> 0000:00:1c.1 May 29 17:39:11 p34 [   50.017598]   IO window: 5000-5fff May 29 
> 17:39:11 p34 [   50.017689]   MEM window: e0400000-e04fffff May 29 17:39:11 
> p34 [   50.017776]   PREFETCH window: disabled. May 29 17:39:11 p34 [ 
> 50.017882] PCI: Bridge: 0000:00:1c.2 May 29 17:39:11 p34 [   50.017966]   IO 
> window: 4000-4fff May 29 17:39:11 p34 [   50.018071]   MEM window: 
> e0300000-e03fffff May 29 17:39:11 p34 [   50.018189]   PREFETCH window: 
> e0800000-e08fffff May 29 17:39:11 p34 [   50.018297] PCI: Bridge: 
> 0000:00:1c.3 May 29 17:39:11 p34 [   50.018382]   IO window: 3000-3fff May 29 
> 17:39:11 p34 [   50.018504]   MEM window: e0200000-e02fffff May 29 17:39:11 
> p34 [   50.018598]   PREFETCH window: e0900000-e09fffff May 29 17:39:11 p34 [ 
> 50.018707] PCI: Bridge: 0000:00:1c.4 May 29 17:39:11 p34 [   50.018792]   IO 
> window: 2000-2fff May 29 17:39:11 p34 [   50.018885]   MEM window: 
> e0100000-e01fffff May 29 17:39:11 p34 [   50.018976]   PREFETCH window: 
> e0a00000-e0afffff May 29 17:39:11 p34 [   50.019121] PCI: Bridge: 
> 0000:00:1e.0 May 29 17:39:11 p34 [   50.019234]   IO window: 1000-1fff May 29 
> 17:39:11 p34 [   50.019325]   MEM window: e0000000-e00fffff May 29 17:39:11 
> p34 [   50.019436]   PREFETCH window: e0b00000-e0bfffff May 29 17:39:11 p34 [ 
> 50.019625] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 
> 17 May 29 17:39:11 p34 [   50.019912] ACPI: PCI Interrupt 0000:00:1c.1[B] -> 
> GSI 16 (level, low) -> IRQ 16 May 29 17:39:11 p34 [   50.020251] ACPI: PCI 
> Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 May 29 17:39:11 
> p34 [   50.020556] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) 
> -> IRQ 19 May 29 17:39:11 p34 [   50.020829] ACPI: PCI Interrupt 
> 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 May 29 17:39:11 p34 [ 
> 50.022111] NET: Registered protocol family 2 May 29 17:39:11 p34 [ 
> 50.032134] IP route cache hash table entries: 262144 (order: 9, 2097152 
> bytes) May 29 17:39:11 p34 [   50.041151] TCP established hash table entries: 
> 131072 (order: 9, 3145728 bytes) May 29 17:39:11 p34 [   50.053741] TCP bind 
> hash table entries: 65536 (order: 8, 1048576 bytes) May 29 17:39:11 p34 [ 
> 50.057942] TCP: Hash tables configured (established 131072 bind 65536) May 29 
> 17:39:11 p34 [   50.058031] TCP reno registered May 29 17:39:11 p34 [ 
> 50.104079] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). May 29 
> 17:39:11 p34 [   50.108290] SGI XFS with large block/inode numbers, no debug 
> enabled May 29 17:39:11 p34 [   50.124796] io scheduler noop registered May 
> 29 17:39:11 p34 [   50.124877] io scheduler anticipatory registered (default) 
> May 29 17:39:11 p34 [   50.130760] assign_interrupt_mode Found MSI capability 
> May 29 17:39:11 p34 [   50.133909] assign_interrupt_mode Found MSI capability 
> May 29 17:39:11 p34 [   50.136992] assign_interrupt_mode Found MSI capability 
> May 29 17:39:11 p34 [   50.139916] assign_interrupt_mode Found MSI capability 
> May 29 17:39:11 p34 [   50.142907] assign_interrupt_mode Found MSI capability 
> May 29 17:39:11 p34 [   50.217615] lp: driver loaded but no devices found May 
> 29 17:39:11 p34 [   50.219124] Real Time Clock Driver v1.12ac May 29 17:39:11 
> p34 [   50.221782] Linux agpgart interface v0.102 (c) Dave Jones May 29 
> 17:39:11 p34 [   50.223328] agpgart: Detected an Intel 965G Chipset. May 29 
> 17:39:11 p34 [   50.224565] agpgart: Detected 7676K stolen memory. May 29 
> 17:39:11 p34 [   50.243289] agpgart: AGP aperture is 256M @ 0xd0000000 May 29 
> 17:39:11 p34 [   50.243856] [drm] Initialized drm 1.1.0 20060810 May 29 
> 17:39:11 p34 [   50.244141] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 
> (level, low) -> IRQ 16 May 29 17:39:11 p34 [   50.246322] [drm] Initialized 
> i915 1.6.0 20060119 on minor 0 May 29 17:39:11 p34 [   50.247415] parport: 
> PnPBIOS parport detected. May 29 17:39:11 p34 [   50.247654] parport0: 
> PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] May 
> 29 17:39:11 p34 [   50.331362] lp0: using parport0 (interrupt-driven). May 29 
> 17:39:11 p34 [   50.341355] loop: loaded (max 8 devices) May 29 17:39:11 p34 
> [   50.341437] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI May 
> 29 17:39:11 p34 [   50.341528] Copyright (c) 1999-2006 Intel Corporation. May 
> 29 17:39:11 p34 [   50.342520] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 
> (level, low) -> IRQ 20 May 29 17:39:11 p34 [   50.360685] e1000: 
> 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43 
> May 29 17:39:11 p34 [   50.439132] e1000: eth0: e1000_probe: Intel(R) 
> PRO/1000 Network Connection May 29 17:39:11 p34 [   50.439655] ACPI: PCI 
> Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 May 29 17:39:11 
> p34 [   50.705534] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 
> 00:0e:0c:00:cd:b1 May 29 17:39:11 p34 [   50.857482] e1000: eth1: 
> e1000_probe: Intel(R) PRO/1000 Network Connection May 29 17:39:11 p34 [ 
> 50.857724] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 
> 22 May 29 17:39:11 p34 [   51.107171] e1000: 0000:06:01.0: e1000_probe: 
> (PCI:33MHz:32-bit) 00:07:e9:29:37:db May 29 17:39:11 p34 [   51.136221] 
> e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection May 29 
> 17:39:11 p34 [   51.138251] netconsole: device eth0 not up yet, forcing it 
> May 29 17:39:11 p34 [   53.180364] e1000: eth0: e1000_watchdog: NIC Link is 
> Up 1000 Mbps Full Duplex, Flow Control: RX/TX May 29 17:39:11 p34 [ 
> 53.683096] netconsole: network logging started May 29 17:39:11 p34 [ 
> 53.686923] ACPI: PCI Interrupt 0000:00:1f.2[A] -> May 29 17:39:11 p34 GSI 19 
> (level, low) -> IRQ 19 May 29 17:39:12 p34 [   54.687783] ahci 0000:00:1f.2: 
> AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode May 29 17:39:12 
> p34 [   54.687956] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
> May 29 17:39:12 p34 [   54.690522] ata1: SATA max UDMA/133 cmd 
> 0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
> May 29 17:39:12 p34 [   54.692552] ata2: SATA max UDMA/133 cmd 
> 0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
> May 29 17:39:12 p34 [   54.694637] ata3: SATA max UDMA/133 cmd 
> 0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
> May 29 17:39:12 p34 [   54.696669] ata4: SATA max UDMA/133 cmd 
> 0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
> May 29 17:39:12 p34 [   54.698687] ata5: SATA max UDMA/133 cmd 
> 0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
> May 29 17:39:12 p34 [   54.700726] ata6: SATA max UDMA/133 cmd 
> 0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
> May 29 17:39:12 p34 [   54.701011] scsi0 : ahci May 29 17:39:13 p34 [ 
> 55.162816] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 
> 17:39:13 p34 [   55.165434] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max 
> UDMA/133 May 29 17:39:13 p34 [   55.165604] ata1.00: 145226112 sectors, multi 
> 0: LBA48 May 29 17:39:13 p34 [   55.169510] ata1.00: configured for UDMA/133 
> May 29 17:39:13 p34 [   55.170050] scsi1 : ahci May 29 17:39:13 p34 [ 
> 55.632888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 
> 17:39:13 p34 [   55.635466] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max 
> UDMA/133 May 29 17:39:13 p34 [   55.635625] ata2.00: 145226112 sectors, multi 
> 0: LBA48 May 29 17:39:13 p34 [   55.639563] ata2.00: configured for UDMA/133 
> May 29 17:39:13 p34 [   55.639885] scsi2 : ahci May 29 17:39:14 p34 [ 
> 56.100111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 
> 17:39:14 p34 [   56.101908] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, 
> max UDMA/133 May 29 17:39:14 p34 [   56.102086] ata3.00: 293046768 sectors, 
> multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:14 p34 [   56.104825] ata3.00: 
> configured for UDMA/133 May 29 17:39:14 p34 [   56.105036] scsi3 : ahci May 
> 29 17:39:14 p34 [   56.567476] ata4: SATA link up 1.5 Gbps (SStatus 113 
> SControl 300) May 29 17:39:14 p34 [   56.569281] ata4.00: ATA-7: WDC 
> WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:14 p34 [   56.569423] 
> ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:14 
> p34 [   56.572150] ata4.00: configured for UDMA/133 May 29 17:39:14 p34 [ 
> 56.572391] scsi4 : ahci May 29 17:39:15 p34 [   57.032365] ata5: SATA link up 
> 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:15 p34 [   57.034115] 
> ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:15 
> p34 [   57.034245] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 
> 31/32) May 29 17:39:15 p34 [   57.036865] ata5.00: configured for UDMA/133 
> May 29 17:39:15 p34 [   57.037078] scsi5 : ahci May 29 17:39:15 p34 [ 
> 57.496550] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29 
> 17:39:15 p34 [   57.498270] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, 
> max UDMA/133 May 29 17:39:15 p34 [   57.498438] ata6.00: 293046768 sectors, 
> multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:15 p34 [   57.501093] ata6.00: 
> configured for UDMA/133 May 29 17:39:15 p34 [   57.502916] scsi 0:0:0:0: 
> Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 May 29 
> 17:39:15 p34 [   57.505120] SCSI device sda: 145226112 512-byte hdwr sectors 
> (74356 MB) May 29 17:39:15 p34 [   57.505456] sda: Write Protect is off May 
> 29 17:39:15 p34 [   57.506051] SCSI device sda: write cache: enabled, read 
> cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [   57.507023] 
> SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 
> p34 [   57.507356] sda: Write Protect is off May 29 17:39:15 p34 [ 
> 57.507977] SCSI device sda: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:15 p34 [   57.508155]  sda:
> May 29 17:39:15 p34  sda1
> May 29 17:39:15 p34  sda2
> May 29 17:39:15 p34  sda3
> May 29 17:39:15 p34 May 29 17:39:15 p34 [   57.524234] sd 0:0:0:0: Attached 
> scsi disk sda May 29 17:39:15 p34 [   57.526473] scsi 1:0:0:0: Direct-Access 
> ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 
> 57.528478] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) May 29 
> 17:39:15 p34 [   57.528824] sdb: Write Protect is off May 29 17:39:15 p34 [ 
> 57.529324] SCSI device sdb: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:15 p34 [   57.530179] SCSI device 
> sdb: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 p34 [ 
> 57.530511] sdb: Write Protect is off May 29 17:39:15 p34 [   57.531016] SCSI 
> device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:15 p34 [   57.531162]  sdb:
> May 29 17:39:15 p34  sdb1
> May 29 17:39:15 p34  sdb2
> May 29 17:39:15 p34  sdb3
> May 29 17:39:15 p34 May 29 17:39:15 p34 [   57.545063] sd 1:0:0:0: Attached 
> scsi disk sdb May 29 17:39:15 p34 [   57.547103] scsi 2:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 
> 57.549007] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:15 p34 [   57.549322] sdc: Write Protect is off May 29 17:39:15 p34 
> [   57.549869] SCSI device sdc: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:15 p34 [   57.550710] SCSI device 
> sdc: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 
> 57.551003] sdc: Write Protect is off May 29 17:39:15 p34 [   57.551505] SCSI 
> device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:15 p34 [   57.551726]  sdc:
> May 29 17:39:15 p34  sdc1
> May 29 17:39:15 p34 May 29 17:39:15 p34 [   57.565362] sd 2:0:0:0: Attached 
> scsi disk sdc May 29 17:39:15 p34 [   57.567447] scsi 3:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 
> 57.569384] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:15 p34 [   57.569725] sdd: Write Protect is off May 29 17:39:15 p34 
> [   57.570218] SCSI device sdd: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:15 p34 [   57.571193] SCSI device 
> sdd: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 
> 57.571500] sdd: Write Protect is off May 29 17:39:15 p34 [   57.572003] SCSI 
> device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:15 p34 [   57.572162]  sdd:
> May 29 17:39:15 p34  sdd1
> May 29 17:39:15 p34 May 29 17:39:15 p34 [   57.587442] sd 3:0:0:0: Attached 
> scsi disk sdd May 29 17:39:15 p34 [   57.589470] scsi 4:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 
> 57.591359] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:15 p34 [   57.591632] sde: Write Protect is off May 29 17:39:15 p34 
> [   57.592147] SCSI device sde: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:15 p34 [   57.593038] SCSI device 
> sde: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 
> 57.593357] sde: Write Protect is off May 29 17:39:15 p34 [   57.593826] SCSI 
> device sde: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:15 p34 [   57.594001]  sde:
> May 29 17:39:15 p34  sde1
> May 29 17:39:15 p34 May 29 17:39:15 p34 [   57.605438] sd 4:0:0:0: Attached 
> scsi disk sde May 29 17:39:15 p34 [   57.607617] scsi 5:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [ 
> 57.609437] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:15 p34 [   57.609770] sdf: Write Protect is off May 29 17:39:15 p34 
> [   57.610284] SCSI device sdf: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:15 p34 [   57.611221] SCSI device 
> sdf: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [ 
> 57.611518] sdf: Write Protect is off May 29 17:39:15 p34 [   57.612049] SCSI 
> device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:15 p34 [   57.612225]  sdf:
> May 29 17:39:15 p34  sdf1
> May 29 17:39:15 p34 May 29 17:39:15 p34 [   57.623709] sd 5:0:0:0: Attached 
> scsi disk sdf May 29 17:39:15 p34 [   57.626592] ACPI: PCI Interrupt 
> 0000:03:00.0[A] -> May 29 17:39:15 p34 GSI 18 (level, low) -> IRQ 18 May 29 
> 17:39:15 p34 [   57.628562] ata7: SATA max UDMA/100 cmd 0xffffc20000108000 
> ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 May 29 17:39:15 p34 [ 
> 57.629915] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl 
> 0x0000000000000000 bmdma 0x0000000000000000 irq 18 May 29 17:39:15 p34 [ 
> 57.630185] scsi6 : sata_sil24 May 29 17:39:16 p34 [   58.036965] ata7: SATA 
> link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [ 
> 58.039003] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 
> 29 17:39:16 p34 [   58.039153] ata7.00: 293046768 sectors, multi 16: LBA48 
> NCQ (depth 31/32) May 29 17:39:16 p34 [   58.042162] ata7.00: configured for 
> UDMA/100 May 29 17:39:16 p34 [   58.042345] scsi7 : sata_sil24 May 29 
> 17:39:16 p34 [   58.448234] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 
> 300) May 29 17:39:16 p34 [   58.450325] ata8.00: ATA-7: WDC 
> WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:16 p34 [   58.450480] 
> ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:16 
> p34 [   58.453526] ata8.00: configured for UDMA/100 May 29 17:39:16 p34 [ 
> 58.454693] scsi 6:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 
> 0 ANSI: 5 May 29 17:39:16 p34 [   58.456666] SCSI device sdg: 293046768 
> 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [   58.456964] sdg: 
> Write Protect is off May 29 17:39:16 p34 [   58.458045] SCSI device sdg: 
> write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 
> 17:39:16 p34 [   58.458913] SCSI device sdg: 293046768 512-byte hdwr sectors 
> (150040 MB) May 29 17:39:16 p34 [   58.459203] sdg: Write Protect is off May 
> 29 17:39:16 p34 [   58.459754] SCSI device sdg: write cache: enabled, read 
> cache: enabled, doesn't support DPO or FUA May 29 17:39:16 p34 [   58.459918] 
> sdg:
> May 29 17:39:16 p34  sdg1
> May 29 17:39:16 p34 May 29 17:39:16 p34 [   58.474199] sd 6:0:0:0: Attached 
> scsi disk sdg May 29 17:39:16 p34 [   58.476416] scsi 7:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:16 p34 [ 
> 58.478356] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:16 p34 [   58.478711] sdh: Write Protect is off May 29 17:39:16 p34 
> [   58.479177] SCSI device sdh: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:16 p34 [   58.480075] SCSI device 
> sdh: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [ 
> 58.480402] sdh: Write Protect is off May 29 17:39:16 p34 [   58.480928] SCSI 
> device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:16 p34 [   58.481075]  sdh:
> May 29 17:39:16 p34  sdh1
> May 29 17:39:16 p34 May 29 17:39:16 p34 [   58.495586] sd 7:0:0:0: Attached 
> scsi disk sdh May 29 17:39:16 p34 [   58.496786] ACPI: PCI Interrupt 
> 0000:04:00.0[A] -> May 29 17:39:16 p34 GSI 19 (level, low) -> IRQ 19 May 29 
> 17:39:16 p34 [   58.498258] ata9: SATA max UDMA/100 cmd 0xffffc20000110000 
> ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 May 29 17:39:16 p34 [ 
> 58.499601] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl 
> 0x0000000000000000 bmdma 0x0000000000000000 irq 19 May 29 17:39:16 p34 [ 
> 58.499831] scsi8 : sata_sil24 May 29 17:39:16 p34 [   58.906766] ata9: SATA 
> link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [ 
> 58.908540] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 
> 29 17:39:16 p34 [   58.908698] ata9.00: 293046768 sectors, multi 16: LBA48 
> NCQ (depth 31/32) May 29 17:39:16 p34 [   58.911323] ata9.00: configured for 
> UDMA/100 May 29 17:39:16 p34 [   58.911545] scsi9 : sata_sil24 May 29 
> 17:39:17 p34 [   59.317958] ata10: SATA link up 1.5 Gbps (SStatus 113 
> SControl 300) May 29 17:39:17 p34 [   59.319759] ata10.00: ATA-7: WDC 
> WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:17 p34 [   59.319892] 
> ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 
> 17:39:17 p34 [   59.322532] ata10.00: configured for UDMA/100 May 29 17:39:17 
> p34 [   59.323739] scsi 8:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 
> 20.0 PQ: 0 ANSI: 5 May 29 17:39:17 p34 [   59.325657] SCSI device sdi: 
> 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 
> 59.325964] sdi: Write Protect is off May 29 17:39:17 p34 [   59.326500] SCSI 
> device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:17 p34 [   59.327388] SCSI device sdi: 293046768 512-byte 
> hdwr sectors (150040 MB) May 29 17:39:17 p34 [   59.327707] sdi: Write 
> Protect is off May 29 17:39:17 p34 [   59.328203] SCSI device sdi: write 
> cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 
> 17:39:17 p34 [   59.328380]  sdi:
> May 29 17:39:17 p34  sdi1
> May 29 17:39:17 p34 May 29 17:39:17 p34 [   59.340639] sd 8:0:0:0: Attached 
> scsi disk sdi May 29 17:39:17 p34 [   59.342775] scsi 9:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:17 p34 [ 
> 59.344776] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:17 p34 [   59.345103] sdj: Write Protect is off May 29 17:39:17 p34 
> [   59.345608] SCSI device sdj: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:17 p34 [   59.346489] SCSI device 
> sdj: 293046768 5
> May 29 17:39:17 p34 12-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 
> 59.346850] sdj: Write Protect is off May 29 17:39:17 p34 [   59.347393] SCSI 
> device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:17 p34 [   59.347552]  sdj:
> May 29 17:39:17 p34  sdj1
> May 29 17:39:17 p34 May 29 17:39:17 p34 [   59.362148] sd 9:0:0:0: Attached 
> scsi disk sdj May 29 17:39:17 p34 [   59.363387] ACPI: PCI Interrupt 
> 0000:05:00.0[A] -> May 29 17:39:17 p34 GSI 16 (level, low) -> IRQ 16 May 29 
> 17:39:17 p34 [   59.365179] ata11: SATA max UDMA/100 cmd 0xffffc20000118000 
> ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 May 29 17:39:17 p34 [ 
> 59.367143] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl 
> 0x0000000000000000 bmdma 0x0000000000000000 irq 16 May 29 17:39:17 p34 [ 
> 59.367432] scsi10 : sata_sil24 May 29 17:39:17 p34 [   59.775363] ata11: SATA 
> link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:17 p34 [ 
> 59.777435] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 
> 29 17:39:17 p34 [   59.777565] ata11.00: 293046768 sectors, multi 16: LBA48 
> NCQ (depth 31/32) May 29 17:39:17 p34 [   59.780599] ata11.00: configured for 
> UDMA/100 May 29 17:39:17 p34 [   59.780798] scsi11 : sata_sil24 May 29 
> 17:39:18 p34 [   60.187580] ata12: SATA link up 1.5 Gbps (SStatus 113 
> SControl 300) May 29 17:39:18 p34 [   60.189625] ata12.00: ATA-7: WDC 
> WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:18 p34 [   60.189769] 
> ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 
> 17:39:18 p34 [   60.192796] ata12.00: configured for UDMA/100 May 29 17:39:18 
> p34 [   60.193974] scsi 10:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 
> 20.0 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [   60.195832] SCSI device sdk: 
> 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 
> 60.196127] sdk: Write Protect is off May 29 17:39:18 p34 [   60.196614] SCSI 
> device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:18 p34 [   60.197514] SCSI device sdk: 293046768 512-byte 
> hdwr sectors (150040 MB) May 29 17:39:18 p34 [   60.197845] sdk: Write 
> Protect is off May 29 17:39:18 p34 [   60.198333] SCSI device sdk: write 
> cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29 
> 17:39:18 p34 [   60.198507]  sdk:
> May 29 17:39:18 p34  sdk1
> May 29 17:39:18 p34 May 29 17:39:18 p34 [   60.212748] sd 10:0:0:0: Attached 
> scsi disk sdk May 29 17:39:18 p34 [   60.214934] scsi 11:0:0:0: Direct-Access 
> ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [ 
> 60.216923] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) May 
> 29 17:39:18 p34 [   60.217271] sdl: Write Protect is off May 29 17:39:18 p34 
> [   60.217774] SCSI device sdl: write cache: enabled, read cache: enabled, 
> doesn't support DPO or FUA May 29 17:39:18 p34 [   60.218665] SCSI device 
> sdl: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 
> 60.218974] sdl: Write Protect is off May 29 17:39:18 p34 [   60.219497] SCSI 
> device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or 
> FUA May 29 17:39:18 p34 [   60.219671]  sdl:
> May 29 17:39:18 p34  sdl1
> May 29 17:39:18 p34 May 29 17:39:18 p34 [   60.234367] sd 11:0:0:0: Attached 
> scsi disk sdl May 29 17:39:18 p34 [   60.236317] ACPI: PCI Interrupt 
> 0000:02:00.0[A] -> May 29 17:39:18 p34 GSI 17 (level, low) -> IRQ 17 May 29 
> 17:39:18 p34 [   60.237365] ata13: PATA max UDMA/100 cmd 0x0000000000015018 
> ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17 May 29 17:39:18 p34 [ 
> 60.237631] scsi12 : pata_marvell May 29 17:39:18 p34 [   60.239266] BAR5:
> May 29 17:39:18 p34 00:00 May 29 17:39:18 p34 01:7F May 29 17:39:18 p34 02:22 
> May 29 17:39:18 p34 03:CA May 29 17:39:18 p34 04:00 May 29 17:39:18 p34 05:00 
> May 29 17:39:18 p34 06:00 May 29 17:39:18 p34 07:00 May 29 17:39:18 p34 08:00 
> May 29 17:39:18 p34 09:00 May 29 17:39:18 p34 0A:00 May 29 17:39:18 p34 0B:00 
> May 29 17:39:18 p34 0C:01 May 29 17:39:18 p34 0D:00 May 29 17:39:18 p34 0E:00 
> May 29 17:39:18 p34 0F:00 May 29 17:39:18 p34 May 29 17:39:18 p34 [ 
> 60.545828] ata13.00: ATAPI, max UDMA/33 May 29 17:39:18 p34 [   60.701530] 
> ata13.00: configured for UDMA/33 May 29 17:39:18 p34 [   60.703942] scsi 
> 12:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5 May 
> 29 17:39:18 p34 [   60.711411] sr0: scsi3-mmc drive: 48x/48x writer cd/rw 
> xa/form2 cdda tray May 29 17:39:18 p34 [   60.711545] Uniform CD-ROM driver 
> Revision: 3.20 May 29 17:39:18 p34 [   60.714694] ACPI: PCI Interrupt 
> 0000:00:1a.7[C] -> May 29 17:39:18 p34 GSI 18 (level, low) -> IRQ 18 May 29 
> 17:39:18 p34 [   60.715083] ehci_hcd 0000:00:1a.7: EHCI Host Controller May 
> 29 17:39:18 p34 [   60.716069] ehci_hcd 0000:00:1a.7: new USB bus registered, 
> assigned bus number 1 May 29 17:39:18 p34 [   60.716562] ehci_hcd 
> 0000:00:1a.7: debug port 1 May 29 17:39:18 p34 [   60.716810] ehci_hcd 
> 0000:00:1a.7: irq 18, io mem 0xe0625c00 May 29 17:39:18 p34 [   60.720814] 
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 29 
> 17:39:18 p34 [   60.723647] usb usb1: configuration #1 chosen from 1 choice 
> May 29 17:39:18 p34 [   60.724706] hub 1-0:1.0: USB hub found May 29 17:39:18 
> p34 [   60.724901] hub 1-0:1.0: 4 ports detected May 29 17:39:18 p34 [ 
> 60.829165] ACPI: PCI Interrupt 0000:00:1d.7[A] -> May 29 17:39:18 p34 GSI 23 
> (level, low) -> IRQ 23 May 29 17:39:18 p34 [   60.829583] ehci_hcd 
> 0000:00:1d.7: EHCI Host Controller May 29 17:39:18 p34 [   60.830451] 
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 May 29 
> 17:39:18 p34 [   60.830986] ehci_hcd 0000:00:1d.7: debug port 1 May 29 
> 17:39:18 p34 [   60.831229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800 
> May 29 17:39:18 p34 [   60.835261] ehci_hcd 0000:00:1d.7: USB 2.0 started, 
> EHCI 1.00, driver 10 Dec 2004 May 29 17:39:18 p34 [   60.837971] usb usb2: 
> configuration #1 chosen from 1 choice May 29 17:39:18 p34 [   60.839024] hub 
> 2-0:1.0: USB hub found May 29 17:39:18 p34 [   60.839241] hub 2-0:1.0: 6 
> ports detected May 29 17:39:19 p34 [   60.942849] USB Universal Host 
> Controller Interface driver v3.0 May 29 17:39:19 p34 [   60.943912] ACPI: PCI 
> Interrupt 0000:00:1a.0[A] -> May 29 17:39:19 p34 GSI 16 (level, low) -> IRQ 
> 16 May 29 17:39:19 p34 [   60.944250] uhci_hcd 0000:00:1a.0: UHCI Host 
> Controller May 29 17:39:19 p34 [   60.945081] uhci_hcd 0000:00:1a.0: new USB 
> bus registered, assigned bus number 3 May 29 17:39:19 p34 [   60.945338] 
> uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 May 29 17:39:19 p34 [ 
> 60.948562] usb usb3: configuration #1 chosen from 1 choice May 29 17:39:19 
> p34 [   60.949639] hub 3-0:1.0: USB hub found May 29 17:39:19 p34 [ 
> 60.949832] hub 3-0:1.0: 2 ports detected May 29 17:39:19 p34 [   61.053768] 
> ACPI: PCI Interrupt 0000:00:1a.1[B] -> May 29 17:39:19 p34 GSI 21 (level, 
> low) -> IRQ 21 May 29 17:39:19 p34 [   61.054098] uhci_hcd 0000:00:1a.1: UHCI 
> Host Controller May 29 17:39:19 p34 [   61.054937] uhci_hcd 0000:00:1a.1: new 
> USB bus registered, assigned bus number 4 May 29 17:39:19 p34 [   61.055187] 
> uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0 May 29 17:39:19 p34 [ 
> 61.058179] usb usb4: configuration #1 chosen from 1 choice May 29 17:39:19 
> p34 [   61.059320] hub 4-0:1.0: USB hub found May 29 17:39:19 p34 [ 
> 61.059500] hub 4-0:1.0: 2 ports detected May 29 17:39:19 p34 [   61.162594] 
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> May 29 17:39:19 p34 GSI 23 (level, 
> low) -> IRQ 23 May 29 17:39:19 p34 [   61.162944] uhci_hcd 0000:00:1d.0: UHCI 
> Host Controller May 29 17:39:19 p34 [   61.163751] uhci_hcd 0000:00:1d.0: new 
> USB bus registered, assigned bus number 5 May 29 17:39:19 p34 [   61.164039] 
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 May 29 17:39:19 p34 [ 
> 61.166996] usb usb5: configuration #1 chosen from 1 choice May 29 17:39:19 
> p34 [   61.168132] hub 5-0:1.0: USB hub found May 29 17:39:19 p34 [ 
> 61.168320] hub 5-0:1.0: 2 ports detected May 29 17:39:19 p34 [   61.271253] 
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> May 29 17:39:19 p34 GSI 19 (level, 
> low) -> IRQ 19 May 29 17:39:19 p34 [   61.271587] uhci_hcd 0000:00:1d.1: UHCI 
> Host Controller May 29 17:39:19 p34 [   61.272501] uhci_hcd 0000:00:1d.1: new 
> USB bus registered, assigned bus number 6 May 29 17:39:19 p34 [   61.272757] 
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 May 29 17:39:19 p34 [ 
> 61.275754] usb usb6: configuration #1 chosen from 1 choice May 29 17:39:19 
> p34 [   61.276869] hub 6-0:1.0: USB hub found May 29 17:39:19 p34 [ 
> 61.277042] hub 6-0:1.0: 2 ports detected May 29 17:39:19 p34 [   61.379999] 
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> May 29 17:39:19 p34 GSI 18 (level, 
> low) -> IRQ 18 May 29 17:39:19 p34 [   61.380331] uhci_hcd 0000:00:1d.2: UHCI 
> Host Controller May 29 17:39:19 p34 [   61.381211] uhci_hcd 0000:00:1d.2: new 
> USB bus registered, assigned bus number 7 May 29 17:39:19 p34 [   61.381464] 
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 May 29 17:39:19 p34 [ 
> 61.385027] usb usb7: configuration #1 chosen from 1 choice May 29 17:39:19 
> p34 [   61.386139] hub 7-0:1.0: USB hub found May 29 17:39:19 p34 [ 
> 61.386313] hub 7-0:1.0: 2 ports detected May 29 17:39:19 p34 [   61.477697] 
> usb 5-1: new low speed USB device using uhci_hcd and address 2 May 29 
> 17:39:19 p34 [   61.489915] Initializing USB Mass Storage driver... May 29 
> 17:39:19 p34 [   61.641966] usb 5-1: configuration #1 chosen from 1 choice 
> May 29 17:39:19 p34 [   61.647974] usbcore: registered new interface driver 
> usb-storage May 29 17:39:19 p34 [   61.648124] USB Mass Storage support 
> registered. May 29 17:39:19 p34 [   61.649681] usbcore: registered new 
> interface driver hiddev May 29 17:39:20 p34 [   62.146211] May 29 17:39:20 
> p34 hiddev96
> May 29 17:39:20 p34 : USB HID v1.00 Device [        UPS] on 
> usb-0000:00:1d.0-1 May 29 17:39:20 p34 [   62.146611] usbcore: registered new 
> interface driver usbhid May 29 17:39:20 p34 [   62.146747] 
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver May 29 17:39:20 p34 [ 
> 62.148329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 
> 1,12 May 29 17:39:20 p34 [   62.152574] serio: i8042 KBD port at 0x60,0x64 
> irq 1 May 29 17:39:20 p34 [   62.152739] serio: i8042 AUX port at 0x60,0x64 
> irq 12 May 29 17:39:20 p34 [   62.153709] mice: PS/2 mouse device common for 
> all mice May 29 17:39:20 p34 [   62.157353] input: PC Speaker as 
> /class/input/input0 May 29 17:39:20 p34 [   62.157569] i2c /dev entries 
> driver May 29 17:39:20 p34 [   62.158424] md: raid1 personality registered 
> for level 1 May 29 17:39:20 p34 [   62.174745] raid6: int64x1     62 MB/s May 
> 29 17:39:20 p34 [   62.178692] input: AT Translated Set 2 keyboard as 
> /class/input/input1 May 29 17:39:20 p34 [   62.192019] raid6: int64x2     89 
> MB/s May 29 17:39:20 p34 [   62.209023] raid6: int64x4     31 MB/s May 29 
> 17:39:20 p34 [   62.225777] raid6: int64x8     11 MB/s May 29 17:39:20 p34 [ 
> 62.242854] raid6: sse2x1     148 MB/s May 29 17:39:20 p34 [   62.259636] 
> raid6: sse2x2     269 MB/s May 29 17:39:20 p34 [   62.276650] raid6: sse2x4 
> 460 MB/s May 29 17:39:20 p34 [   62.276789] raid6: using algorithm sse2x4 
> (460 MB/s) May 29 17:39:20 p34 [   62.276937] md: raid6 personality 
> registered for level 6 May 29 17:39:20 p34 [   62.277053] md: raid5 
> personality registered for level 5 May 29 17:39:20 p34 [   62.277191] md: 
> raid4 personality registered for level 4 May 29 17:39:20 p34 [   62.277346] 
> raid5: automatically using best checksumming function: generic_sse May 29 
> 17:39:20 p34 [   62.281657]    generic_sse:    56.000 MB/sec May 29 17:39:20 
> p34 [   62.281777] raid5: using function: generic_sse (56.000 MB/sec) May 29 
> 17:39:20 p34 [   62.282244] Advanced Linux Sound Architecture Driver Version 
> 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). May 29 17:39:20 p34 [   62.288220] 
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> May 29 17:39:20 p34 GSI 22 (level, 
> low) -> IRQ 22 May 29 17:39:20 p34 [   62.839554] input: ImPS/2 Generic Wheel 
> Mouse as /class/input/input2 May 29 17:39:21 p34 [   63.412487] hda_intel: 
> azx_get_response timeout, switching to polling mode... May 29 17:39:21 p34 [ 
> 63.435772] ALSA device list: May 29 17:39:21 p34 [   63.435876]   #0: HDA 
> Intel at 0xe0620000 irq 22 May 29 17:39:21 p34 [   63.436031] u32 classifier 
> May 29 17:39:21 p34 [   63.436148]     Actions configured May 29 17:39:21 p34 
> [   63.436279] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) May 29 
> 17:39:21 p34 [   63.438882] ip_tables: (C) 2000-2006 Netfilter Core Team May 
> 29 17:39:21 p34 [   63.439995] TCP cubic registered May 29 17:39:21 p34 [ 
> 63.440386] NET: Registered protocol family 1 May 29 17:39:21 p34 [ 
> 63.440507] NET: Registered protocol family 17 May 29 17:39:21 p34 [ 
> 63.445397] md: Autodetecting RAID arrays. May 29 17:39:21 p34 [   63.572955] 
> md: autorun ... May 29 17:39:21 p34 [   63.573095] md: considering sdl1 ... 
> May 29 17:39:21 p34 [   63.573596] md:  adding sdl1 ... May 29 17:39:21 p34 [ 
> 63.573924] md:  adding sdk1 ... May 29 17:39:21 p34 [   63.574312] md: 
> adding sdj1 ... May 29 17:39:21 p34 [   63.574664] md:  adding sdi1 ... May 
> 29 17:39:21 p34 [   63.575005] md:  adding sdh1 ... May 29 17:39:21 p34 [ 
> 63.575396] md:  adding sdg1 ... May 29 17:39:21 p34 [   63.575754] md: 
> adding sdf1 ... May 29 17:39:21 p34 [   63.576089] md:  adding sde1 ... May 
> 29 17:39:21 p34 [   63.576472] md:  adding sdd1 ... May 29 17:39:21 p34 [ 
> 63.576824] md:  adding sdc1 ... May 29 17:39:21 p34 [   63.577015] md: sdb3 
> has different UUID to sdl1 May 29 17:39:21 p34 [   63.577204] md: sdb2 has 
> different UUID to sdl1 May 29 17:39:21 p34 [   63.577446] md: sdb1 has 
> different UUID to sdl1 May 29 17:39:21 p34 [   63.577647] md: sda3 has 
> different UUID to sdl1 May 29 17:39:21 p34 [   63.577846] md: sda2 has 
> different UUID to sdl1 May 29 17:39:21 p34 [   63.578043] md: sda1 has 
> different UUID to sdl1 May 29 17:39:21 p34 [   63.579527] md: created md3 May 
> 29 17:39:21 p34 [   63.579639] md: bind<sdc1> May 29 17:39:21 p34 [ 
> 63.579956] md: bind<sdd1> May 29 17:39:21 p34 [   63.580329] md: bind<sde1> 
> May 29 17:39:21 p34 [   63.580627] md: bind<sdf1> May 29 17:39:21 p34 [ 
> 63.580933] md: bind<sdg1> May 29 17:39:21 p34 [   63.581229] md: bind<sdh1> 
> May 29 17:39:21 p34 [   63.581624] md: bind<sdi1> May 29 17:39:21 p34 [ 
> 63.582103] md: bind<sdj1> May 29 17:39:21 p34 [   63.582436] md: bind<sdk1> 
> May 29 17:39:21 p34 [   63.582776] md: bind<sdl1> May 29 17:39:21 p34 [ 
> 63.583100] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [ 
> 63.586384] raid5: device sdl1 operational as raid disk 2 May 29 17:39:21 p34 
> [   63.586509] raid5: device sdk1 operational as raid disk 3 May 29 17:39:21 
> p34 [   63.586656] raid5: device sdj1 operational as raid disk 0 May 29 
> 17:39:21 p34 [   63.586829] raid5: device sdi1 operational as raid disk 1 May 
> 29 17:39:21 p34 [   63.586973] raid5: device sdh1 operational as raid disk 6 
> May 29 17:39:21 p34 [   63.587122] raid5: device sdg1 operational as raid 
> disk 5 May 29 17:39:21 p34 [   63.587317] raid5: device sdf1 operational as 
> raid disk 4 May 29 17:39:21 p34 [   63.587459] raid5: device sde1 operational 
> as raid disk 7 May 29 17:39:21 p34 [   63.587603] raid5: device sdd1 
> operational as raid disk 8 May 29 17:39:21 p34 [   63.587758] raid5: device 
> sdc1 operational as raid disk 9 May 29 17:39:21 p34 [   63.608186] raid5: 
> allocated 10562kB for md3 May 29 17:39:21 p34 [   63.608334] raid5: raid 
> level 5 set md3 active with 10 out of 10 devices, algorithm 2 May 29 17:39:21 
> p34 [   63.608519] RAID5 conf printout: May 29 17:39:21 p34 [   63.608639] 
> --- rd:10 wd:10 May 29 17:39:21 p34 [   63.608767]  disk 0, o:1, dev:sdj1 May 
> 29 17:39:21 p34 [   63.608897]  disk 1, o:1, dev:sdi1 May 29 17:39:21 p34 [ 
> 63.609073]  disk 2, o:1, dev:sdl1 May 29 17:39:21 p34 [   63.609184]  disk 3, 
> o:1, dev:sdk1 May 29 17:39:21 p34 [   63.609346]  disk 4, o:1, dev:sdf1 May 
> 29 17:39:21 p34 [   63.609507]  disk 5, o:1, dev:sdg1 May 29 17:39:21 p34 [ 
> 63.609640]  disk 6, o:1, dev:sdh1 May 29 17:39:21 p34 [   63.609771]  disk 7, 
> o:1, dev:sde1 May 29 17:39:21 p34 [   63.609903]  disk 8, o:1, dev:sdd1 May 
> 29 17:39:21 p34 [   63.610040]  disk 9, o:1, dev:sdc1 May 29 17:39:21 p34 [ 
> 63.612460] md: considering sdb3 ... May 29 17:39:21 p34 [   63.612835] md: 
> adding sdb3 ... May 29 17:39:21 p34 [   63.613027] md: sdb2 has different 
> UUID to sdb3 May 29 17:39:21 p34 [   63.613220] md: sdb1 has different UUID 
> to sdb3 May 29 17:39:21 p34 [   63.613589] md:  adding sda3 ... May 29 
> 17:39:21 p34 [   63.613801] md: sda2 has different UUID to sdb3 May 29 
> 17:39:21 p34 [   63.613997] md: sda1 has different UUID to sdb3 May 29 
> 17:39:21 p34 [   63.615606] md: created md2 May 29 17:39:21 p34 [ 
> 63.615720] md: bind<sda3> May 29 17:39:21 p34 [   63.616094] md: bind<sdb3> 
> May 29 17:39:21 p34 [   63.616575] md: running: May 29 17:39:21 p34 May 29 
> 17:39:21 p34 [   63.619316] raid1: raid set md2 active with 2 out of 2 
> mirrors May 29 17:39:21 p34 [   63.620513] md: considering sdb2 ... May 29 
> 17:39:21 p34 [   63.620870] md:  adding sdb2 ... May 29 17:39:21 p34 [ 
> 63.621082] md: sdb1 has different UUID to sdb2 May 29 17:39:21 p34 [ 
> 63.621465] md:  adding sda2 ... May 29 17:39:21 p34 [   63.621646] md: sda1 
> has different UUID to sdb2 May 29 17:39:21 p34 [   63.623619] md: created md1 
> May 29 17:39:21 p34 [   63.623733] md: bind<sda2> May 29 17:39:21 p34 [ 
> 63.624059] md: bind<sdb2> May 29 17:39:21 p34 [   63.624439] md: running: May 
> 29 17:39:21 p34 May 29 17:39:21 p34 [   63.627438] raid1: raid set md1 active 
> with 2 out of 2 mirrors May 29 17:39:21 p34 [   63.628555] md: considering 
> sdb1 ... May 29 17:39:21 p34 [   63.628883] md:  adding sdb1 ... May 29 
> 17:39:21 p34 [   63.629302] md:  adding sda1 ... May 29 17:39:21 p34 [ 
> 63.629411] md: created md0 May 29 17:39:21 p34 [   63.629576] md: bind<sda1> 
> May 29 17:39:21 p34 [   63.629882] md: bind<sdb1> May 29 17:39:21 p34 [ 
> 63.630233] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [ 
> 63.633438] raid1: raid set md0 active with 2 out of 2 mirrors May 29 17:39:21 
> p34 [   63.634598] md: ... autorun DONE. May 29 17:39:21 p34 [   63.695456] 
> UDF-fs: No VRS found May 29 17:39:21 p34 [   63.699158] Filesystem "md2": 
> Disabling barriers, not supported by the underlying device May 29 17:39:21 
> p34 [   63.713776] XFS mounting filesystem md2 May 29 17:39:21 p34 [ 
> 63.813743] VFS: Mounted root (xfs filesystem) readonly. May 29 17:39:21 p34 [ 
> 63.814115] Freeing unused kernel memory: 220k freed May 29 17:40:39 p34 [ 
> 141.447304] Adding 16787768k swap on /dev/md0.  Priority:-1 extents:1 
> across:16787768k May 29 17:40:40 p34 [  142.497721] Filesystem "md2": 
> Disabling barriers, not supported by the underlying device May 29 17:41:04 
> p34 [  166.716017] kjournald starting.  Commit interval 5 seconds May 29 
> 17:41:04 p34 [  166.729375] EXT3 FS on md1, May 29 17:41:04 p34 internal 
> journal May 29 17:41:04 p34 [  166.729663] EXT3-fs: mounted filesystem with 
> ordered data mode. May 29 17:41:04 p34 [  166.751799] Filesystem "md3": 
> Disabling barriers, not supported by the underlying device May 29 17:41:04 
> p34 [  166.758717] XFS mounting filesystem md3 May 29 17:41:54 p34 [ 
> 216.821357] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, 
> Flow Control: RX May 29 17:42:29 p34 [  251.481399] process `syslogd' is 
> using obsolete setsockopt SO_BSDCOMPAT May 29 17:46:42 p34 [  504.074171] 
> mtrr: no more MTRRs available
>

[-- Attachment #2: Type: TEXT/plain, Size: 55798 bytes --]

May 29 17:39:11 p34 [    0.000000] Linux version 2.6.21.3 (root@p34.internal.lan) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP Sun May 27 06:28:33 EDT 2007 
May 29 17:39:11 p34 [    0.000000] Command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 netconsole=4444@192.168.168.253/eth0,514@192.168.168.254/00:50:8D:ED:3C:E7 nmi_watchdog=1 
May 29 17:39:11 p34 [    0.000000] BIOS-provided physical RAM map: 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000000000000 - 000000000008f000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 
May 29 17:39:11 p34 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable) 
May 29 17:39:11 p34 [    0.000000] end_pfn_map = 2277376 
May 29 17:39:11 p34 [    0.000000] DMI 2.4 present. 
May 29 17:39:11 p34 [    0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) 
May 29 17:39:11 p34 [    0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL  DG965WH       64C       1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: FACP CF6FC000, 0074 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: DSDT CF6F7000, 40E9 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: FACS CF6A8000, 0040 
May 29 17:39:11 p34 [    0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: WDDT CF6F5000, 0040 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: MCFG CF6F4000, 003C (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: HPET CF6F2000, 0038 (r1 INTEL  DG965WH       64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6F0000, 01BC (r1 INTEL     CpuPm      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6EF000, 0175 (r1 INTEL   Cpu0Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A7000, 0175 (r1 INTEL   Cpu1Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A6000, 0175 (r1 INTEL   Cpu2Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] ACPI: SSDT CF6A5000, 0175 (r1 INTEL   Cpu3Ist      64C MSFT  1000013) 
May 29 17:39:11 p34 [    0.000000] Zone PFN ranges: 
May 29 17:39:11 p34 [    0.000000]   DMA             0 ->     4096 
May 29 17:39:11 p34 [    0.000000]   DMA32        4096 ->  1048576 
May 29 17:39:11 p34 [    0.000000]   Normal    1048576 ->  2277376 
May 29 17:39:11 p34 [    0.000000] early_node_map[6] active PFN ranges 
May 29 17:39:11 p34 [    0.000000]     0:        0 ->      143 
May 29 17:39:11 p34 [    0.000000]     0:      256 ->   849295 
May 29 17:39:11 p34 [    0.000000]     0:   849308 ->   849491 
May 29 17:39:11 p34 [    0.000000]     0:   849649 ->   849650 
May 29 17:39:11 p34 [    0.000000]     0:   849663 ->   849664 
May 29 17:39:11 p34 [    0.000000]     0:  1048576 ->  2277376 
May 29 17:39:11 p34 [    0.000000] ACPI: PM-Timer IO Port: 0x408 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #0 (Bootup-CPU) 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #2 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #1 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) 
May 29 17:39:11 p34 [    0.000000] Processor #3 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) 
May 29 17:39:11 p34 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) 
May 29 17:39:11 p34 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) 
May 29 17:39:11 p34 [    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 
May 29 17:39:11 p34 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 
May 29 17:39:11 p34 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 
May 29 17:39:11 p34 [    0.000000] Setting APIC routing to flat 
May 29 17:39:11 p34 [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 
May 29 17:39:11 p34 [    0.000000] Using ACPI (MADT) for SMP configuration information 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 000000000008f000 - 00000000000a0000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf58f000 - 00000000cf59c000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf653000 - 00000000cf6a5000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6a5000 - 00000000cf6a8000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6a8000 - 00000000cf6ef000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6ef000 - 00000000cf6f1000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf6f2000 - 00000000cf6ff000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000cf700000 - 00000000d0000000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000d0000000 - 00000000fff00000 
May 29 17:39:11 p34 [    0.000000] Nosave address range: 00000000fff00000 - 0000000100000000 
May 29 17:39:11 p34 [    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) 
May 29 17:39:11 p34 [    0.000000] PERCPU: Allocating 24512 bytes of per cpu data 
May 29 17:39:11 p34 [    0.000000] Built 1 zonelists.  Total pages: 2045692 
May 29 17:39:11 p34 [    0.000000] Kernel command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 netconsole=4444@192.168.168.253/eth0,514@192.168.168.254/00:50:8D:ED:3C:E7 nmi_watchdog=1 
May 29 17:39:11 p34 [    0.000000] netconsole: local port 4444 
May 29 17:39:11 p34 [    0.000000] netconsole: local IP 192.168.168.253 
May 29 17:39:11 p34 [    0.000000] netconsole: interface eth0 
May 29 17:39:11 p34 [    0.000000] netconsole: remote port 514 
May 29 17:39:11 p34 [    0.000000] netconsole: remote IP 192.168.168.254 
May 29 17:39:11 p34 [    0.000000] netconsole: remote ethernet address 00:50:8d:ed:3c:e7 
May 29 17:39:11 p34 [    0.000000] Initializing CPU#0 
May 29 17:39:11 p34 [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) 
May 29 17:39:11 p34 [   48.249507] time.c: Detected 2397.605 MHz processor. 
May 29 17:39:11 p34 [   48.250572] Console: colour VGA+ 80x25 
May 29 17:39:11 p34 [   48.258651] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) 
May 29 17:39:11 p34 [   48.264855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) 
May 29 17:39:11 p34 [   48.265963] Checking aperture... 
May 29 17:39:11 p34 [   48.266011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 
May 29 17:39:11 p34 [   48.302233] Placing software IO TLB between 0x95f6000 - 0xd5f6000 
May 29 17:39:11 p34 [   48.374061] Memory: 8103748k/9109504k available (3428k kernel code, 208464k reserved, 1270k data, 220k init) 
May 29 17:39:11 p34 [   48.434756] Calibrating delay using timer specific routine.. 4797.72 BogoMIPS (lpj=2398863) 
May 29 17:39:11 p34 [   48.435408] Mount-cache hash table entries: 256 
May 29 17:39:11 p34 [   48.436246] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.436307] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.436347] using mwait in idle threads. 
May 29 17:39:11 p34 [   48.436389] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.436430] CPU: Processor Core ID: 0 
May 29 17:39:11 p34 [   48.436474] CPU0: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.436526] Freeing SMP alternatives: 36k freed 
May 29 17:39:11 p34 [   48.436584] ACPI: Core revision 20070126 
May 29 17:39:11 p34 [   48.485666] activating NMI Watchdog ... done. 
May 29 17:39:11 p34 [   48.485786] Using local APIC timer interrupts. 
May 29 17:39:11 p34 [   48.527564] result 16650037 
May 29 17:39:11 p34 [   48.527642] Detected 16.650 MHz APIC timer. 
May 29 17:39:11 p34 [   48.529312] Booting processor 1/4 APIC 0x2 
May 29 17:39:11 p34 [   48.539943] Initializing CPU#1 
May 29 17:39:11 p34 [   48.600727] Calibrating delay using timer specific routine.. 4795.07 BogoMIPS (lpj=2397539) 
May 29 17:39:11 p34 [   48.600785] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.600822] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.600852] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.600879] CPU: Processor Core ID: 2 
May 29 17:39:11 p34 [   48.600914] CPU1: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.601348] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 
May 29 17:39:11 p34 [   48.601451] checking TSC synchronization [CPU#0 -> CPU#1]: passed. 
May 29 17:39:11 p34 [   48.623998] Booting processor 2/4 APIC 0x1 
May 29 17:39:11 p34 [   48.635015] Initializing CPU#2 
May 29 17:39:11 p34 [   48.694729] Calibrating delay using timer specific routine.. 4796.63 BogoMIPS (lpj=2398315) 
May 29 17:39:11 p34 [   48.694791] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.694829] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.694861] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.694891] CPU: Processor Core ID: 1 
May 29 17:39:11 p34 [   48.694928] CPU2: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.695368] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 
May 29 17:39:11 p34 [   48.695508] checking TSC synchronization [CPU#0 -> CPU#2]: passed. 
May 29 17:39:11 p34 [   48.717915] Booting processor 3/4 APIC 0x3 
May 29 17:39:11 p34 [   48.728547] Initializing CPU#3 
May 29 17:39:11 p34 [   48.788686] Calibrating delay using timer specific routine.. 4795.46 BogoMIPS (lpj=2397730) 
May 29 17:39:11 p34 [   48.788750] CPU: L1 I cache: 32K, L1 D cache: 32K 
May 29 17:39:11 p34 [   48.788787] CPU: L2 cache: 4096K 
May 29 17:39:11 p34 [   48.788817] CPU: Physical Processor ID: 0 
May 29 17:39:11 p34 [   48.788846] CPU: Processor Core ID: 3 
May 29 17:39:11 p34 [   48.788882] CPU3: Thermal monitoring enabled (TM2) 
May 29 17:39:11 p34 [   48.789318] Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07 
May 29 17:39:11 p34 [   48.789446] checking TSC synchronization [CPU#0 -> CPU#3]: passed. 
May 29 17:39:11 p34 [   48.810753] Brought up 4 CPUs 
May 29 17:39:11 p34 [   48.810941] testing NMI watchdog ... OK. 
May 29 17:39:11 p34 [   49.178287] migration_cost=156,193 
May 29 17:39:11 p34 [   49.182074] NET: Registered protocol family 16 
May 29 17:39:11 p34 [   49.183506] ACPI: bus type pci registered 
May 29 17:39:11 p34 [   49.183670] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved 
May 29 17:39:11 p34 [   49.183764] PCI: Not using MMCONFIG. 
May 29 17:39:11 p34 [   49.183847] PCI: Using configuration type 1 
May 29 17:39:11 p34 [   49.324928] ACPI: Interpreter enabled 
May 29 17:39:11 p34 [   49.325010] ACPI: Using IOAPIC for interrupt routing 
May 29 17:39:11 p34 [   49.518427] ACPI: PCI Root Bridge [PCI0] (0000:00) 
May 29 17:39:11 p34 [   49.523873] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO 
May 29 17:39:11 p34 [   49.523974] PCI quirk: region 0500-053f claimed by ICH6 GPIO 
May 29 17:39:11 p34 [   49.534492] PCI: Transparent bridge - 0000:00:1e.0 
May 29 17:39:11 p34 [   49.792346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.796475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) 
May 29 17:39:11 p34 [   49.800543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.804653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.808781] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) 
May 29 17:39:11 p34 [   49.812812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) 
May 29 17:39:11 p34 [   49.816864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) 
May 29 17:39:11 p34 [   49.820999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) 
May 29 17:39:11 p34 [   49.824280] Linux Plug and Play Support v0.97 (c) Adam Belay 
May 29 17:39:11 p34 [   49.824569] pnp: PnP ACPI init 
May 29 17:39:11 p34 [   49.923406] pnp: PnP ACPI: found 12 devices 
May 29 17:39:11 p34 [   49.927655] SCSI subsystem initialized 
May 29 17:39:11 p34 [   49.935480] usbcore: registered new interface driver usbfs 
May 29 17:39:11 p34 [   49.936497] usbcore: registered new interface driver hub 
May 29 17:39:11 p34 [   49.939469] usbcore: registered new device driver usb 
May 29 17:39:11 p34 [   49.942750] PCI: Using ACPI for IRQ routing 
May 29 17:39:11 p34 [   49.942851] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report 
May 29 17:39:11 p34 [   49.944223] PCI-GART: No AMD northbridge found. 
May 29 17:39:11 p34 [   49.944929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 
May 29 17:39:11 p34 [   49.945145] hpet0: 3 64-bit timers, 14318180 Hz 
May 29 17:39:11 p34 [   49.946417] Time: tsc clocksource has been installed. 
May 29 17:39:11 p34 [   49.947517] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved 
May 29 17:39:11 p34 [   49.947640] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved 
May 29 17:39:11 p34 [   49.947785] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved 
May 29 17:39:11 p34 [   49.947943] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved 
May 29 17:39:11 p34 [   49.948125] pnp: 00:06: ioport range 0x500-0x53f has been reserved 
May 29 17:39:11 p34 [   49.948231] pnp: 00:06: ioport range 0x400-0x47f has been reserved 
May 29 17:39:11 p34 [   49.948433] pnp: 00:06: ioport range 0x680-0x6ff has been reserved 
May 29 17:39:11 p34 [   49.961379] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 
May 29 17:39:11 p34 [   50.015143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[e0084000-e00847ff]  Max Packet=[2048]  IR/IT contexts=[4/8] 
May 29 17:39:11 p34 [   50.016694] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 
May 29 17:39:11 p34 [   50.017108] PCI: Bridge: 0000:00:1c.0 
May 29 17:39:11 p34 [   50.017203]   IO window: disabled. 
May 29 17:39:11 p34 [   50.017295]   MEM window: e0700000-e07fffff 
May 29 17:39:11 p34 [   50.017381]   PREFETCH window: disabled. 
May 29 17:39:11 p34 [   50.017507] PCI: Bridge: 0000:00:1c.1 
May 29 17:39:11 p34 [   50.017598]   IO window: 5000-5fff 
May 29 17:39:11 p34 [   50.017689]   MEM window: e0400000-e04fffff 
May 29 17:39:11 p34 [   50.017776]   PREFETCH window: disabled. 
May 29 17:39:11 p34 [   50.017882] PCI: Bridge: 0000:00:1c.2 
May 29 17:39:11 p34 [   50.017966]   IO window: 4000-4fff 
May 29 17:39:11 p34 [   50.018071]   MEM window: e0300000-e03fffff 
May 29 17:39:11 p34 [   50.018189]   PREFETCH window: e0800000-e08fffff 
May 29 17:39:11 p34 [   50.018297] PCI: Bridge: 0000:00:1c.3 
May 29 17:39:11 p34 [   50.018382]   IO window: 3000-3fff 
May 29 17:39:11 p34 [   50.018504]   MEM window: e0200000-e02fffff 
May 29 17:39:11 p34 [   50.018598]   PREFETCH window: e0900000-e09fffff 
May 29 17:39:11 p34 [   50.018707] PCI: Bridge: 0000:00:1c.4 
May 29 17:39:11 p34 [   50.018792]   IO window: 2000-2fff 
May 29 17:39:11 p34 [   50.018885]   MEM window: e0100000-e01fffff 
May 29 17:39:11 p34 [   50.018976]   PREFETCH window: e0a00000-e0afffff 
May 29 17:39:11 p34 [   50.019121] PCI: Bridge: 0000:00:1e.0 
May 29 17:39:11 p34 [   50.019234]   IO window: 1000-1fff 
May 29 17:39:11 p34 [   50.019325]   MEM window: e0000000-e00fffff 
May 29 17:39:11 p34 [   50.019436]   PREFETCH window: e0b00000-e0bfffff 
May 29 17:39:11 p34 [   50.019625] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 
May 29 17:39:11 p34 [   50.019912] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 
May 29 17:39:11 p34 [   50.020251] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 
May 29 17:39:11 p34 [   50.020556] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 
May 29 17:39:11 p34 [   50.020829] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 
May 29 17:39:11 p34 [   50.022111] NET: Registered protocol family 2 
May 29 17:39:11 p34 [   50.032134] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) 
May 29 17:39:11 p34 [   50.041151] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) 
May 29 17:39:11 p34 [   50.053741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) 
May 29 17:39:11 p34 [   50.057942] TCP: Hash tables configured (established 131072 bind 65536) 
May 29 17:39:11 p34 [   50.058031] TCP reno registered 
May 29 17:39:11 p34 [   50.104079] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
May 29 17:39:11 p34 [   50.108290] SGI XFS with large block/inode numbers, no debug enabled 
May 29 17:39:11 p34 [   50.124796] io scheduler noop registered 
May 29 17:39:11 p34 [   50.124877] io scheduler anticipatory registered (default) 
May 29 17:39:11 p34 [   50.130760] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.133909] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.136992] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.139916] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.142907] assign_interrupt_mode Found MSI capability 
May 29 17:39:11 p34 [   50.217615] lp: driver loaded but no devices found 
May 29 17:39:11 p34 [   50.219124] Real Time Clock Driver v1.12ac 
May 29 17:39:11 p34 [   50.221782] Linux agpgart interface v0.102 (c) Dave Jones 
May 29 17:39:11 p34 [   50.223328] agpgart: Detected an Intel 965G Chipset. 
May 29 17:39:11 p34 [   50.224565] agpgart: Detected 7676K stolen memory. 
May 29 17:39:11 p34 [   50.243289] agpgart: AGP aperture is 256M @ 0xd0000000 
May 29 17:39:11 p34 [   50.243856] [drm] Initialized drm 1.1.0 20060810 
May 29 17:39:11 p34 [   50.244141] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 
May 29 17:39:11 p34 [   50.246322] [drm] Initialized i915 1.6.0 20060119 on minor 0 
May 29 17:39:11 p34 [   50.247415] parport: PnPBIOS parport detected. 
May 29 17:39:11 p34 [   50.247654] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] 
May 29 17:39:11 p34 [   50.331362] lp0: using parport0 (interrupt-driven). 
May 29 17:39:11 p34 [   50.341355] loop: loaded (max 8 devices) 
May 29 17:39:11 p34 [   50.341437] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI 
May 29 17:39:11 p34 [   50.341528] Copyright (c) 1999-2006 Intel Corporation. 
May 29 17:39:11 p34 [   50.342520] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 
May 29 17:39:11 p34 [   50.360685] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43 
May 29 17:39:11 p34 [   50.439132] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection 
May 29 17:39:11 p34 [   50.439655] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 
May 29 17:39:11 p34 [   50.705534] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:00:cd:b1 
May 29 17:39:11 p34 [   50.857482] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection 
May 29 17:39:11 p34 [   50.857724] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22 
May 29 17:39:11 p34 [   51.107171] e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:29:37:db 
May 29 17:39:11 p34 [   51.136221] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection 
May 29 17:39:11 p34 [   51.138251] netconsole: device eth0 not up yet, forcing it 
May 29 17:39:11 p34 [   53.180364] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX 
May 29 17:39:11 p34 [   53.683096] netconsole: network logging started 
May 29 17:39:11 p34 [   53.686923] ACPI: PCI Interrupt 0000:00:1f.2[A] -> 
May 29 17:39:11 p34 GSI 19 (level, low) -> IRQ 19 
May 29 17:39:12 p34 [   54.687783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode 
May 29 17:39:12 p34 [   54.687956] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part  
May 29 17:39:12 p34 [   54.690522] ata1: SATA max UDMA/133 cmd 0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.692552] ata2: SATA max UDMA/133 cmd 0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.694637] ata3: SATA max UDMA/133 cmd 0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.696669] ata4: SATA max UDMA/133 cmd 0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.698687] ata5: SATA max UDMA/133 cmd 0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.700726] ata6: SATA max UDMA/133 cmd 0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377 
May 29 17:39:12 p34 [   54.701011] scsi0 : ahci 
May 29 17:39:13 p34 [   55.162816] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:13 p34 [   55.165434] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 
May 29 17:39:13 p34 [   55.165604] ata1.00: 145226112 sectors, multi 0: LBA48  
May 29 17:39:13 p34 [   55.169510] ata1.00: configured for UDMA/133 
May 29 17:39:13 p34 [   55.170050] scsi1 : ahci 
May 29 17:39:13 p34 [   55.632888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:13 p34 [   55.635466] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 
May 29 17:39:13 p34 [   55.635625] ata2.00: 145226112 sectors, multi 0: LBA48  
May 29 17:39:13 p34 [   55.639563] ata2.00: configured for UDMA/133 
May 29 17:39:13 p34 [   55.639885] scsi2 : ahci 
May 29 17:39:14 p34 [   56.100111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:14 p34 [   56.101908] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:14 p34 [   56.102086] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:14 p34 [   56.104825] ata3.00: configured for UDMA/133 
May 29 17:39:14 p34 [   56.105036] scsi3 : ahci 
May 29 17:39:14 p34 [   56.567476] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:14 p34 [   56.569281] ata4.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:14 p34 [   56.569423] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:14 p34 [   56.572150] ata4.00: configured for UDMA/133 
May 29 17:39:14 p34 [   56.572391] scsi4 : ahci 
May 29 17:39:15 p34 [   57.032365] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:15 p34 [   57.034115] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:15 p34 [   57.034245] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:15 p34 [   57.036865] ata5.00: configured for UDMA/133 
May 29 17:39:15 p34 [   57.037078] scsi5 : ahci 
May 29 17:39:15 p34 [   57.496550] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:15 p34 [   57.498270] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:15 p34 [   57.498438] ata6.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) 
May 29 17:39:15 p34 [   57.501093] ata6.00: configured for UDMA/133 
May 29 17:39:15 p34 [   57.502916] scsi 0:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.505120] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.505456] sda: Write Protect is off 
May 29 17:39:15 p34 [   57.506051] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.507023] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.507356] sda: Write Protect is off 
May 29 17:39:15 p34 [   57.507977] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.508155]  sda:
May 29 17:39:15 p34  sda1
May 29 17:39:15 p34  sda2
May 29 17:39:15 p34  sda3
May 29 17:39:15 p34  
May 29 17:39:15 p34 [   57.524234] sd 0:0:0:0: Attached scsi disk sda 
May 29 17:39:15 p34 [   57.526473] scsi 1:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.528478] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.528824] sdb: Write Protect is off 
May 29 17:39:15 p34 [   57.529324] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.530179] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) 
May 29 17:39:15 p34 [   57.530511] sdb: Write Protect is off 
May 29 17:39:15 p34 [   57.531016] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.531162]  sdb:
May 29 17:39:15 p34  sdb1
May 29 17:39:15 p34  sdb2
May 29 17:39:15 p34  sdb3
May 29 17:39:15 p34  
May 29 17:39:15 p34 [   57.545063] sd 1:0:0:0: Attached scsi disk sdb 
May 29 17:39:15 p34 [   57.547103] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.549007] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.549322] sdc: Write Protect is off 
May 29 17:39:15 p34 [   57.549869] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.550710] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.551003] sdc: Write Protect is off 
May 29 17:39:15 p34 [   57.551505] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.551726]  sdc:
May 29 17:39:15 p34  sdc1
May 29 17:39:15 p34  
May 29 17:39:15 p34 [   57.565362] sd 2:0:0:0: Attached scsi disk sdc 
May 29 17:39:15 p34 [   57.567447] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.569384] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.569725] sdd: Write Protect is off 
May 29 17:39:15 p34 [   57.570218] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.571193] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.571500] sdd: Write Protect is off 
May 29 17:39:15 p34 [   57.572003] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.572162]  sdd:
May 29 17:39:15 p34  sdd1
May 29 17:39:15 p34  
May 29 17:39:15 p34 [   57.587442] sd 3:0:0:0: Attached scsi disk sdd 
May 29 17:39:15 p34 [   57.589470] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.591359] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.591632] sde: Write Protect is off 
May 29 17:39:15 p34 [   57.592147] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.593038] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.593357] sde: Write Protect is off 
May 29 17:39:15 p34 [   57.593826] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.594001]  sde:
May 29 17:39:15 p34  sde1
May 29 17:39:15 p34  
May 29 17:39:15 p34 [   57.605438] sd 4:0:0:0: Attached scsi disk sde 
May 29 17:39:15 p34 [   57.607617] scsi 5:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:15 p34 [   57.609437] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.609770] sdf: Write Protect is off 
May 29 17:39:15 p34 [   57.610284] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.611221] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:15 p34 [   57.611518] sdf: Write Protect is off 
May 29 17:39:15 p34 [   57.612049] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:15 p34 [   57.612225]  sdf:
May 29 17:39:15 p34  sdf1
May 29 17:39:15 p34  
May 29 17:39:15 p34 [   57.623709] sd 5:0:0:0: Attached scsi disk sdf 
May 29 17:39:15 p34 [   57.626592] ACPI: PCI Interrupt 0000:03:00.0[A] -> 
May 29 17:39:15 p34 GSI 18 (level, low) -> IRQ 18 
May 29 17:39:15 p34 [   57.628562] ata7: SATA max UDMA/100 cmd 0xffffc20000108000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 
May 29 17:39:15 p34 [   57.629915] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 
May 29 17:39:15 p34 [   57.630185] scsi6 : sata_sil24 
May 29 17:39:16 p34 [   58.036965] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:16 p34 [   58.039003] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:16 p34 [   58.039153] ata7.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:16 p34 [   58.042162] ata7.00: configured for UDMA/100 
May 29 17:39:16 p34 [   58.042345] scsi7 : sata_sil24 
May 29 17:39:16 p34 [   58.448234] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:16 p34 [   58.450325] ata8.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:16 p34 [   58.450480] ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:16 p34 [   58.453526] ata8.00: configured for UDMA/100 
May 29 17:39:16 p34 [   58.454693] scsi 6:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:16 p34 [   58.456666] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.456964] sdg: Write Protect is off 
May 29 17:39:16 p34 [   58.458045] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.458913] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.459203] sdg: Write Protect is off 
May 29 17:39:16 p34 [   58.459754] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.459918]  sdg:
May 29 17:39:16 p34  sdg1
May 29 17:39:16 p34  
May 29 17:39:16 p34 [   58.474199] sd 6:0:0:0: Attached scsi disk sdg 
May 29 17:39:16 p34 [   58.476416] scsi 7:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:16 p34 [   58.478356] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.478711] sdh: Write Protect is off 
May 29 17:39:16 p34 [   58.479177] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.480075] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:16 p34 [   58.480402] sdh: Write Protect is off 
May 29 17:39:16 p34 [   58.480928] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:16 p34 [   58.481075]  sdh:
May 29 17:39:16 p34  sdh1
May 29 17:39:16 p34  
May 29 17:39:16 p34 [   58.495586] sd 7:0:0:0: Attached scsi disk sdh 
May 29 17:39:16 p34 [   58.496786] ACPI: PCI Interrupt 0000:04:00.0[A] -> 
May 29 17:39:16 p34 GSI 19 (level, low) -> IRQ 19 
May 29 17:39:16 p34 [   58.498258] ata9: SATA max UDMA/100 cmd 0xffffc20000110000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 
May 29 17:39:16 p34 [   58.499601] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 
May 29 17:39:16 p34 [   58.499831] scsi8 : sata_sil24 
May 29 17:39:16 p34 [   58.906766] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:16 p34 [   58.908540] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:16 p34 [   58.908698] ata9.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:16 p34 [   58.911323] ata9.00: configured for UDMA/100 
May 29 17:39:16 p34 [   58.911545] scsi9 : sata_sil24 
May 29 17:39:17 p34 [   59.317958] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:17 p34 [   59.319759] ata10.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:17 p34 [   59.319892] ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:17 p34 [   59.322532] ata10.00: configured for UDMA/100 
May 29 17:39:17 p34 [   59.323739] scsi 8:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:17 p34 [   59.325657] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.325964] sdi: Write Protect is off 
May 29 17:39:17 p34 [   59.326500] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.327388] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.327707] sdi: Write Protect is off 
May 29 17:39:17 p34 [   59.328203] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.328380]  sdi:
May 29 17:39:17 p34  sdi1
May 29 17:39:17 p34  
May 29 17:39:17 p34 [   59.340639] sd 8:0:0:0: Attached scsi disk sdi 
May 29 17:39:17 p34 [   59.342775] scsi 9:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:17 p34 [   59.344776] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.345103] sdj: Write Protect is off 
May 29 17:39:17 p34 [   59.345608] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.346489] SCSI device sdj: 293046768 5
May 29 17:39:17 p34 12-byte hdwr sectors (150040 MB) 
May 29 17:39:17 p34 [   59.346850] sdj: Write Protect is off 
May 29 17:39:17 p34 [   59.347393] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:17 p34 [   59.347552]  sdj:
May 29 17:39:17 p34  sdj1
May 29 17:39:17 p34  
May 29 17:39:17 p34 [   59.362148] sd 9:0:0:0: Attached scsi disk sdj 
May 29 17:39:17 p34 [   59.363387] ACPI: PCI Interrupt 0000:05:00.0[A] -> 
May 29 17:39:17 p34 GSI 16 (level, low) -> IRQ 16 
May 29 17:39:17 p34 [   59.365179] ata11: SATA max UDMA/100 cmd 0xffffc20000118000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 
May 29 17:39:17 p34 [   59.367143] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 
May 29 17:39:17 p34 [   59.367432] scsi10 : sata_sil24 
May 29 17:39:17 p34 [   59.775363] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:17 p34 [   59.777435] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:17 p34 [   59.777565] ata11.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:17 p34 [   59.780599] ata11.00: configured for UDMA/100 
May 29 17:39:17 p34 [   59.780798] scsi11 : sata_sil24 
May 29 17:39:18 p34 [   60.187580] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
May 29 17:39:18 p34 [   60.189625] ata12.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 
May 29 17:39:18 p34 [   60.189769] ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) 
May 29 17:39:18 p34 [   60.192796] ata12.00: configured for UDMA/100 
May 29 17:39:18 p34 [   60.193974] scsi 10:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:18 p34 [   60.195832] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.196127] sdk: Write Protect is off 
May 29 17:39:18 p34 [   60.196614] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.197514] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.197845] sdk: Write Protect is off 
May 29 17:39:18 p34 [   60.198333] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.198507]  sdk:
May 29 17:39:18 p34  sdk1
May 29 17:39:18 p34  
May 29 17:39:18 p34 [   60.212748] sd 10:0:0:0: Attached scsi disk sdk 
May 29 17:39:18 p34 [   60.214934] scsi 11:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 
May 29 17:39:18 p34 [   60.216923] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.217271] sdl: Write Protect is off 
May 29 17:39:18 p34 [   60.217774] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.218665] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) 
May 29 17:39:18 p34 [   60.218974] sdl: Write Protect is off 
May 29 17:39:18 p34 [   60.219497] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
May 29 17:39:18 p34 [   60.219671]  sdl:
May 29 17:39:18 p34  sdl1
May 29 17:39:18 p34  
May 29 17:39:18 p34 [   60.234367] sd 11:0:0:0: Attached scsi disk sdl 
May 29 17:39:18 p34 [   60.236317] ACPI: PCI Interrupt 0000:02:00.0[A] -> 
May 29 17:39:18 p34 GSI 17 (level, low) -> IRQ 17 
May 29 17:39:18 p34 [   60.237365] ata13: PATA max UDMA/100 cmd 0x0000000000015018 ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17 
May 29 17:39:18 p34 [   60.237631] scsi12 : pata_marvell 
May 29 17:39:18 p34 [   60.239266] BAR5:
May 29 17:39:18 p34 00:00 
May 29 17:39:18 p34 01:7F 
May 29 17:39:18 p34 02:22 
May 29 17:39:18 p34 03:CA 
May 29 17:39:18 p34 04:00 
May 29 17:39:18 p34 05:00 
May 29 17:39:18 p34 06:00 
May 29 17:39:18 p34 07:00 
May 29 17:39:18 p34 08:00 
May 29 17:39:18 p34 09:00 
May 29 17:39:18 p34 0A:00 
May 29 17:39:18 p34 0B:00 
May 29 17:39:18 p34 0C:01 
May 29 17:39:18 p34 0D:00 
May 29 17:39:18 p34 0E:00 
May 29 17:39:18 p34 0F:00 
May 29 17:39:18 p34  
May 29 17:39:18 p34 [   60.545828] ata13.00: ATAPI, max UDMA/33 
May 29 17:39:18 p34 [   60.701530] ata13.00: configured for UDMA/33 
May 29 17:39:18 p34 [   60.703942] scsi 12:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5 
May 29 17:39:18 p34 [   60.711411] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray 
May 29 17:39:18 p34 [   60.711545] Uniform CD-ROM driver Revision: 3.20 
May 29 17:39:18 p34 [   60.714694] ACPI: PCI Interrupt 0000:00:1a.7[C] -> 
May 29 17:39:18 p34 GSI 18 (level, low) -> IRQ 18 
May 29 17:39:18 p34 [   60.715083] ehci_hcd 0000:00:1a.7: EHCI Host Controller 
May 29 17:39:18 p34 [   60.716069] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 
May 29 17:39:18 p34 [   60.716562] ehci_hcd 0000:00:1a.7: debug port 1 
May 29 17:39:18 p34 [   60.716810] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625c00 
May 29 17:39:18 p34 [   60.720814] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 
May 29 17:39:18 p34 [   60.723647] usb usb1: configuration #1 chosen from 1 choice 
May 29 17:39:18 p34 [   60.724706] hub 1-0:1.0: USB hub found 
May 29 17:39:18 p34 [   60.724901] hub 1-0:1.0: 4 ports detected 
May 29 17:39:18 p34 [   60.829165] ACPI: PCI Interrupt 0000:00:1d.7[A] -> 
May 29 17:39:18 p34 GSI 23 (level, low) -> IRQ 23 
May 29 17:39:18 p34 [   60.829583] ehci_hcd 0000:00:1d.7: EHCI Host Controller 
May 29 17:39:18 p34 [   60.830451] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 
May 29 17:39:18 p34 [   60.830986] ehci_hcd 0000:00:1d.7: debug port 1 
May 29 17:39:18 p34 [   60.831229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800 
May 29 17:39:18 p34 [   60.835261] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 
May 29 17:39:18 p34 [   60.837971] usb usb2: configuration #1 chosen from 1 choice 
May 29 17:39:18 p34 [   60.839024] hub 2-0:1.0: USB hub found 
May 29 17:39:18 p34 [   60.839241] hub 2-0:1.0: 6 ports detected 
May 29 17:39:19 p34 [   60.942849] USB Universal Host Controller Interface driver v3.0 
May 29 17:39:19 p34 [   60.943912] ACPI: PCI Interrupt 0000:00:1a.0[A] -> 
May 29 17:39:19 p34 GSI 16 (level, low) -> IRQ 16 
May 29 17:39:19 p34 [   60.944250] uhci_hcd 0000:00:1a.0: UHCI Host Controller 
May 29 17:39:19 p34 [   60.945081] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 
May 29 17:39:19 p34 [   60.945338] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 
May 29 17:39:19 p34 [   60.948562] usb usb3: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   60.949639] hub 3-0:1.0: USB hub found 
May 29 17:39:19 p34 [   60.949832] hub 3-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.053768] ACPI: PCI Interrupt 0000:00:1a.1[B] -> 
May 29 17:39:19 p34 GSI 21 (level, low) -> IRQ 21 
May 29 17:39:19 p34 [   61.054098] uhci_hcd 0000:00:1a.1: UHCI Host Controller 
May 29 17:39:19 p34 [   61.054937] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 
May 29 17:39:19 p34 [   61.055187] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0 
May 29 17:39:19 p34 [   61.058179] usb usb4: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.059320] hub 4-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.059500] hub 4-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.162594] ACPI: PCI Interrupt 0000:00:1d.0[A] -> 
May 29 17:39:19 p34 GSI 23 (level, low) -> IRQ 23 
May 29 17:39:19 p34 [   61.162944] uhci_hcd 0000:00:1d.0: UHCI Host Controller 
May 29 17:39:19 p34 [   61.163751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 
May 29 17:39:19 p34 [   61.164039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 
May 29 17:39:19 p34 [   61.166996] usb usb5: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.168132] hub 5-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.168320] hub 5-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.271253] ACPI: PCI Interrupt 0000:00:1d.1[B] -> 
May 29 17:39:19 p34 GSI 19 (level, low) -> IRQ 19 
May 29 17:39:19 p34 [   61.271587] uhci_hcd 0000:00:1d.1: UHCI Host Controller 
May 29 17:39:19 p34 [   61.272501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 
May 29 17:39:19 p34 [   61.272757] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 
May 29 17:39:19 p34 [   61.275754] usb usb6: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.276869] hub 6-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.277042] hub 6-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.379999] ACPI: PCI Interrupt 0000:00:1d.2[C] -> 
May 29 17:39:19 p34 GSI 18 (level, low) -> IRQ 18 
May 29 17:39:19 p34 [   61.380331] uhci_hcd 0000:00:1d.2: UHCI Host Controller 
May 29 17:39:19 p34 [   61.381211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 
May 29 17:39:19 p34 [   61.381464] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 
May 29 17:39:19 p34 [   61.385027] usb usb7: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.386139] hub 7-0:1.0: USB hub found 
May 29 17:39:19 p34 [   61.386313] hub 7-0:1.0: 2 ports detected 
May 29 17:39:19 p34 [   61.477697] usb 5-1: new low speed USB device using uhci_hcd and address 2 
May 29 17:39:19 p34 [   61.489915] Initializing USB Mass Storage driver... 
May 29 17:39:19 p34 [   61.641966] usb 5-1: configuration #1 chosen from 1 choice 
May 29 17:39:19 p34 [   61.647974] usbcore: registered new interface driver usb-storage 
May 29 17:39:19 p34 [   61.648124] USB Mass Storage support registered. 
May 29 17:39:19 p34 [   61.649681] usbcore: registered new interface driver hiddev 
May 29 17:39:20 p34 [   62.146211] 
May 29 17:39:20 p34 hiddev96
May 29 17:39:20 p34 : USB HID v1.00 Device [        UPS] on usb-0000:00:1d.0-1 
May 29 17:39:20 p34 [   62.146611] usbcore: registered new interface driver usbhid 
May 29 17:39:20 p34 [   62.146747] drivers/usb/input/hid-core.c: v2.6:USB HID core driver 
May 29 17:39:20 p34 [   62.148329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 
May 29 17:39:20 p34 [   62.152574] serio: i8042 KBD port at 0x60,0x64 irq 1 
May 29 17:39:20 p34 [   62.152739] serio: i8042 AUX port at 0x60,0x64 irq 12 
May 29 17:39:20 p34 [   62.153709] mice: PS/2 mouse device common for all mice 
May 29 17:39:20 p34 [   62.157353] input: PC Speaker as /class/input/input0 
May 29 17:39:20 p34 [   62.157569] i2c /dev entries driver 
May 29 17:39:20 p34 [   62.158424] md: raid1 personality registered for level 1 
May 29 17:39:20 p34 [   62.174745] raid6: int64x1     62 MB/s 
May 29 17:39:20 p34 [   62.178692] input: AT Translated Set 2 keyboard as /class/input/input1 
May 29 17:39:20 p34 [   62.192019] raid6: int64x2     89 MB/s 
May 29 17:39:20 p34 [   62.209023] raid6: int64x4     31 MB/s 
May 29 17:39:20 p34 [   62.225777] raid6: int64x8     11 MB/s 
May 29 17:39:20 p34 [   62.242854] raid6: sse2x1     148 MB/s 
May 29 17:39:20 p34 [   62.259636] raid6: sse2x2     269 MB/s 
May 29 17:39:20 p34 [   62.276650] raid6: sse2x4     460 MB/s 
May 29 17:39:20 p34 [   62.276789] raid6: using algorithm sse2x4 (460 MB/s) 
May 29 17:39:20 p34 [   62.276937] md: raid6 personality registered for level 6 
May 29 17:39:20 p34 [   62.277053] md: raid5 personality registered for level 5 
May 29 17:39:20 p34 [   62.277191] md: raid4 personality registered for level 4 
May 29 17:39:20 p34 [   62.277346] raid5: automatically using best checksumming function: generic_sse 
May 29 17:39:20 p34 [   62.281657]    generic_sse:    56.000 MB/sec 
May 29 17:39:20 p34 [   62.281777] raid5: using function: generic_sse (56.000 MB/sec) 
May 29 17:39:20 p34 [   62.282244] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). 
May 29 17:39:20 p34 [   62.288220] ACPI: PCI Interrupt 0000:00:1b.0[A] -> 
May 29 17:39:20 p34 GSI 22 (level, low) -> IRQ 22 
May 29 17:39:20 p34 [   62.839554] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 
May 29 17:39:21 p34 [   63.412487] hda_intel: azx_get_response timeout, switching to polling mode... 
May 29 17:39:21 p34 [   63.435772] ALSA device list: 
May 29 17:39:21 p34 [   63.435876]   #0: HDA Intel at 0xe0620000 irq 22 
May 29 17:39:21 p34 [   63.436031] u32 classifier 
May 29 17:39:21 p34 [   63.436148]     Actions configured  
May 29 17:39:21 p34 [   63.436279] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) 
May 29 17:39:21 p34 [   63.438882] ip_tables: (C) 2000-2006 Netfilter Core Team 
May 29 17:39:21 p34 [   63.439995] TCP cubic registered 
May 29 17:39:21 p34 [   63.440386] NET: Registered protocol family 1 
May 29 17:39:21 p34 [   63.440507] NET: Registered protocol family 17 
May 29 17:39:21 p34 [   63.445397] md: Autodetecting RAID arrays. 
May 29 17:39:21 p34 [   63.572955] md: autorun ... 
May 29 17:39:21 p34 [   63.573095] md: considering sdl1 ... 
May 29 17:39:21 p34 [   63.573596] md:  adding sdl1 ... 
May 29 17:39:21 p34 [   63.573924] md:  adding sdk1 ... 
May 29 17:39:21 p34 [   63.574312] md:  adding sdj1 ... 
May 29 17:39:21 p34 [   63.574664] md:  adding sdi1 ... 
May 29 17:39:21 p34 [   63.575005] md:  adding sdh1 ... 
May 29 17:39:21 p34 [   63.575396] md:  adding sdg1 ... 
May 29 17:39:21 p34 [   63.575754] md:  adding sdf1 ... 
May 29 17:39:21 p34 [   63.576089] md:  adding sde1 ... 
May 29 17:39:21 p34 [   63.576472] md:  adding sdd1 ... 
May 29 17:39:21 p34 [   63.576824] md:  adding sdc1 ... 
May 29 17:39:21 p34 [   63.577015] md: sdb3 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577204] md: sdb2 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577446] md: sdb1 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577647] md: sda3 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.577846] md: sda2 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.578043] md: sda1 has different UUID to sdl1 
May 29 17:39:21 p34 [   63.579527] md: created md3 
May 29 17:39:21 p34 [   63.579639] md: bind<sdc1> 
May 29 17:39:21 p34 [   63.579956] md: bind<sdd1> 
May 29 17:39:21 p34 [   63.580329] md: bind<sde1> 
May 29 17:39:21 p34 [   63.580627] md: bind<sdf1> 
May 29 17:39:21 p34 [   63.580933] md: bind<sdg1> 
May 29 17:39:21 p34 [   63.581229] md: bind<sdh1> 
May 29 17:39:21 p34 [   63.581624] md: bind<sdi1> 
May 29 17:39:21 p34 [   63.582103] md: bind<sdj1> 
May 29 17:39:21 p34 [   63.582436] md: bind<sdk1> 
May 29 17:39:21 p34 [   63.582776] md: bind<sdl1> 
May 29 17:39:21 p34 [   63.583100] md: running: 
May 29 17:39:21 p34  
May 29 17:39:21 p34 [   63.586384] raid5: device sdl1 operational as raid disk 2 
May 29 17:39:21 p34 [   63.586509] raid5: device sdk1 operational as raid disk 3 
May 29 17:39:21 p34 [   63.586656] raid5: device sdj1 operational as raid disk 0 
May 29 17:39:21 p34 [   63.586829] raid5: device sdi1 operational as raid disk 1 
May 29 17:39:21 p34 [   63.586973] raid5: device sdh1 operational as raid disk 6 
May 29 17:39:21 p34 [   63.587122] raid5: device sdg1 operational as raid disk 5 
May 29 17:39:21 p34 [   63.587317] raid5: device sdf1 operational as raid disk 4 
May 29 17:39:21 p34 [   63.587459] raid5: device sde1 operational as raid disk 7 
May 29 17:39:21 p34 [   63.587603] raid5: device sdd1 operational as raid disk 8 
May 29 17:39:21 p34 [   63.587758] raid5: device sdc1 operational as raid disk 9 
May 29 17:39:21 p34 [   63.608186] raid5: allocated 10562kB for md3 
May 29 17:39:21 p34 [   63.608334] raid5: raid level 5 set md3 active with 10 out of 10 devices, algorithm 2 
May 29 17:39:21 p34 [   63.608519] RAID5 conf printout: 
May 29 17:39:21 p34 [   63.608639]  --- rd:10 wd:10 
May 29 17:39:21 p34 [   63.608767]  disk 0, o:1, dev:sdj1 
May 29 17:39:21 p34 [   63.608897]  disk 1, o:1, dev:sdi1 
May 29 17:39:21 p34 [   63.609073]  disk 2, o:1, dev:sdl1 
May 29 17:39:21 p34 [   63.609184]  disk 3, o:1, dev:sdk1 
May 29 17:39:21 p34 [   63.609346]  disk 4, o:1, dev:sdf1 
May 29 17:39:21 p34 [   63.609507]  disk 5, o:1, dev:sdg1 
May 29 17:39:21 p34 [   63.609640]  disk 6, o:1, dev:sdh1 
May 29 17:39:21 p34 [   63.609771]  disk 7, o:1, dev:sde1 
May 29 17:39:21 p34 [   63.609903]  disk 8, o:1, dev:sdd1 
May 29 17:39:21 p34 [   63.610040]  disk 9, o:1, dev:sdc1 
May 29 17:39:21 p34 [   63.612460] md: considering sdb3 ... 
May 29 17:39:21 p34 [   63.612835] md:  adding sdb3 ... 
May 29 17:39:21 p34 [   63.613027] md: sdb2 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.613220] md: sdb1 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.613589] md:  adding sda3 ... 
May 29 17:39:21 p34 [   63.613801] md: sda2 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.613997] md: sda1 has different UUID to sdb3 
May 29 17:39:21 p34 [   63.615606] md: created md2 
May 29 17:39:21 p34 [   63.615720] md: bind<sda3> 
May 29 17:39:21 p34 [   63.616094] md: bind<sdb3> 
May 29 17:39:21 p34 [   63.616575] md: running: 
May 29 17:39:21 p34  
May 29 17:39:21 p34 [   63.619316] raid1: raid set md2 active with 2 out of 2 mirrors 
May 29 17:39:21 p34 [   63.620513] md: considering sdb2 ... 
May 29 17:39:21 p34 [   63.620870] md:  adding sdb2 ... 
May 29 17:39:21 p34 [   63.621082] md: sdb1 has different UUID to sdb2 
May 29 17:39:21 p34 [   63.621465] md:  adding sda2 ... 
May 29 17:39:21 p34 [   63.621646] md: sda1 has different UUID to sdb2 
May 29 17:39:21 p34 [   63.623619] md: created md1 
May 29 17:39:21 p34 [   63.623733] md: bind<sda2> 
May 29 17:39:21 p34 [   63.624059] md: bind<sdb2> 
May 29 17:39:21 p34 [   63.624439] md: running: 
May 29 17:39:21 p34  
May 29 17:39:21 p34 [   63.627438] raid1: raid set md1 active with 2 out of 2 mirrors 
May 29 17:39:21 p34 [   63.628555] md: considering sdb1 ... 
May 29 17:39:21 p34 [   63.628883] md:  adding sdb1 ... 
May 29 17:39:21 p34 [   63.629302] md:  adding sda1 ... 
May 29 17:39:21 p34 [   63.629411] md: created md0 
May 29 17:39:21 p34 [   63.629576] md: bind<sda1> 
May 29 17:39:21 p34 [   63.629882] md: bind<sdb1> 
May 29 17:39:21 p34 [   63.630233] md: running: 
May 29 17:39:21 p34  
May 29 17:39:21 p34 [   63.633438] raid1: raid set md0 active with 2 out of 2 mirrors 
May 29 17:39:21 p34 [   63.634598] md: ... autorun DONE. 
May 29 17:39:21 p34 [   63.695456] UDF-fs: No VRS found 
May 29 17:39:21 p34 [   63.699158] Filesystem "md2": Disabling barriers, not supported by the underlying device 
May 29 17:39:21 p34 [   63.713776] XFS mounting filesystem md2 
May 29 17:39:21 p34 [   63.813743] VFS: Mounted root (xfs filesystem) readonly. 
May 29 17:39:21 p34 [   63.814115] Freeing unused kernel memory: 220k freed 
May 29 17:40:39 p34 [  141.447304] Adding 16787768k swap on /dev/md0.  Priority:-1 extents:1 across:16787768k 
May 29 17:40:40 p34 [  142.497721] Filesystem "md2": Disabling barriers, not supported by the underlying device 
May 29 17:41:04 p34 [  166.716017] kjournald starting.  Commit interval 5 seconds 
May 29 17:41:04 p34 [  166.729375] EXT3 FS on md1, 
May 29 17:41:04 p34 internal journal 
May 29 17:41:04 p34 [  166.729663] EXT3-fs: mounted filesystem with ordered data mode. 
May 29 17:41:04 p34 [  166.751799] Filesystem "md3": Disabling barriers, not supported by the underlying device 
May 29 17:41:04 p34 [  166.758717] XFS mounting filesystem md3 
May 29 17:41:54 p34 [  216.821357] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX 
May 29 17:42:29 p34 [  251.481399] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT 
May 29 17:46:42 p34 [  504.074171] mtrr: no more MTRRs available