2.6.22-rc3-mm1 reiser4 bug

2.6.22-rc3-mm1 reiser4 bug

[Berck E. Nash]

All appears to work fine, until I try to boot a kernel with a Reiser4 /
partition.  Then I get endless errors of the sort:

[  206.349450] sd 1:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK

(See attached dmesg for more, I only sent the first 1,000 lines, it goes
on until a hard reboot.)

The same partition and the same kernel work great as long as that
partition isn't the current system root.  The same kernel and the same
hard drive works fine as long as the partition is formatted ReiserFS.

Re: 2.6.22-rc3-mm1 reiser4 bug

[Zan Lynx]

[-- Attachment #1.1: Type: text/plain, Size: 880 bytes --]

On Sat, 2007-06-02 at 13:11 -0600, Berck E. Nash wrote:
> All appears to work fine, until I try to boot a kernel with a Reiser4 /
> partition.  Then I get endless errors of the sort:
> 
> [  206.349450] sd 1:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
> driverbyte=DRIVER_OK,SUGGEST_OK
> 
> (See attached dmesg for more, I only sent the first 1,000 lines, it goes
> on until a hard reboot.)
> 
> The same partition and the same kernel work great as long as that
> partition isn't the current system root.  The same kernel and the same
> hard drive works fine as long as the partition is formatted ReiserFS.

It can't be a simple bug, because I am running 2.6.22-rc3-mm1 and
Reiser4 on / right now, and it works well for me.

I am using a busybox initramfs that does the actual mounting.  I don't
know if that makes a difference.
-- 
Zan Lynx <zlynx@acm.org>

[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 196 bytes --]

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3137 bytes --]

Re: 2.6.22-rc3-mm1 reiser4 bug

[Edward Shishkin]

Hello.
I looked at your long attachment. It seems, you have problems with hardware.
Would you please check your root drive (sde) by badblocks program?

Thanks,
Edward.

Berck E. Nash wrote:

>All appears to work fine, until I try to boot a kernel with a Reiser4 /
>partition.  Then I get endless errors of the sort:
>
>[  206.349450] sd 1:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
>driverbyte=DRIVER_OK,SUGGEST_OK
>
>(See attached dmesg for more, I only sent the first 1,000 lines, it goes
>on until a hard reboot.)
>
>The same partition and the same kernel work great as long as that
>partition isn't the current system root.  The same kernel and the same
>hard drive works fine as long as the partition is formatted ReiserFS.
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/
>
>
>
>
>  
>