[Processor] Hi-Temperature showed in trip points

[Processor] Hi-Temperature showed in trip points

[Renato S. Yamane]

Hi,
I have a laptop Toshiba M45-S355 (with Intel Pentium M Processor 750 - 
1.86GHz) and trip points show me hi-temperature (that is unsupported by 
this processor):

$ uname -a
Linux mandachuva 2.6.21.1 #1 PREEMPT Sun May 20 22:28:53 BRT 2007 i686 
GNU/Linux

$ cat /proc/acpi/thermal_zone/TZCL/trip_points
critical (S5):           105 C

MAX temperature suported by this processor is 100°C (I see this in Intel 
specifications), so I think that is not very good idea allow 
temperatures higher than 100°C.

$ cat /proc/acpi/processor/CPU0/info
processor id:            0
acpi id:                 0
bus mastering control:   yes
power management:        yes
throttling control:      yes
limit interface:         yes

Best regards,
Renato S. Yamane

Re: [Processor] Hi-Temperature showed in trip points

[Pavel Machek]

Hi!

> I have a laptop Toshiba M45-S355 (with Intel Pentium M 
> Processor 750 - 1.86GHz) and trip points show me 
> hi-temperature (that is unsupported by this processor):
> 
> $ uname -a
> Linux mandachuva 2.6.21.1 #1 PREEMPT Sun May 20 22:28:53 
> BRT 2007 i686 GNU/Linux
> 
> $ cat /proc/acpi/thermal_zone/TZCL/trip_points
> critical (S5):           105 C

echo right values into trip points to lower this.

Note: Len removed that functionality in 2.6.22.

							Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [Processor] Hi-Temperature showed in trip points

[Robert Hancock]

Renato S. Yamane wrote:
> Hi,
> I have a laptop Toshiba M45-S355 (with Intel Pentium M Processor 750 - 
> 1.86GHz) and trip points show me hi-temperature (that is unsupported by 
> this processor):
> 
> $ uname -a
> Linux mandachuva 2.6.21.1 #1 PREEMPT Sun May 20 22:28:53 BRT 2007 i686 
> GNU/Linux
> 
> $ cat /proc/acpi/thermal_zone/TZCL/trip_points
> critical (S5):           105 C
> 
> MAX temperature suported by this processor is 100°C (I see this in Intel 
> specifications), so I think that is not very good idea allow 
> temperatures higher than 100°C.

That trip point comes from the BIOS.. likely complain to Toshiba, if 
anyone. Likely the CPU itself will start throttling or shut down well 
before that temperature is reached.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/