From: otto Meier <gf435@gmx.net>
To: linux-kernel@vger.kernel.org
Subject: sata_promise disk error 2.6.22-rc5 with hrt1 patch
Date: Sun, 24 Jun 2007 20:49:05 +0200 [thread overview]
Message-ID: <467EBCA1.5070702@gmx.net> (raw)
Hello,
I got the following in my logs:
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x0
Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
35/00:00:c1:17:92/00:04:17:00:00/e0 tag 0 cdb 0x0 data 524288 out
Jun 24 19:06:40 gate2 kernel: res
50/00:00:c0:1b:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
Jun 24 19:06:40 gate2 kernel: ata4: EH complete
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
hardware sectors (250059 MB)
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x0
Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
25/00:00:c1:15:92/00:02:17:00:00/e0 tag 0 cdb 0x0 data 262144 in
Jun 24 19:06:40 gate2 kernel: res
50/00:00:c0:17:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
Jun 24 19:06:40 gate2 kernel: ata4: EH complete
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
hardware sectors (250059 MB)
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
The system continued without seeing other effects.
It is runnuning a 2.6.22-rc5 kernel with hrt1 patch.
The drive ist part of a raid5 with 4 identical drives
lspci -vvv gives:
02:06.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
300 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at bc00 [size=128]
Region 2: I/O ports at b800 [size=256]
Region 3: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at fdda0000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Has anyone an idea whats going on?
Best regards
next reply other threads:[~2007-06-24 19:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-24 18:49 otto Meier [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-06-24 21:30 sata_promise disk error 2.6.22-rc5 with hrt1 patch Mikael Pettersson
2007-07-07 6:28 ` Dan Merillat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=467EBCA1.5070702@gmx.net \
--to=gf435@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox