* ali_pata sets my udma to 33 when it should be 66
@ 2007-07-17 16:28 Stephen Clark
0 siblings, 0 replies; only message in thread
From: Stephen Clark @ 2007-07-17 16:28 UTC (permalink / raw)
To: linux-kernel
I just upgraded my HP N5430 laptop to fedora 7 with a 2.6.21 kernel.
It used to be udma/66 under the old ide driver.
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000
irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008
irq 15
scsi0 : pata_ali
ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100
ata1.00: 39070080 sectors, multi 16: LBA
ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
ata1.00: configured for UDMA/33
How can this be fixed?
Thanks,
Steve
--
"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety." (Ben Franklin)
"The course of history shows that as a government grows, liberty
decreases." (Thomas Jefferson)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-07-17 16:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-17 16:28 ali_pata sets my udma to 33 when it should be 66 Stephen Clark
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox