* PCI Quirk / Hidden Bus Report
@ 2007-07-19 3:33 pat-lkml
2007-07-30 11:55 ` Adrian Bunk
0 siblings, 1 reply; 4+ messages in thread
From: pat-lkml @ 2007-07-19 3:33 UTC (permalink / raw)
To: linux-kernel
I received:
PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
in my dmesg in 2.6.22, and am reporting it. Context of message follows.
Full dmesg output available on request. This is a Clevo d900t laptop
motherboard, and everything works perfectly on it.
Pat Erley
--
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=22
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd951, last bus=10
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
Time: tsc clocksource has been installed.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PCI Quirk / Hidden Bus Report
2007-07-19 3:33 PCI Quirk / Hidden Bus Report pat-lkml
@ 2007-07-30 11:55 ` Adrian Bunk
2007-07-30 13:44 ` pat-lkml
2007-07-30 15:04 ` Jeffrey Hundstad
0 siblings, 2 replies; 4+ messages in thread
From: Adrian Bunk @ 2007-07-30 11:55 UTC (permalink / raw)
To: pat-lkml, Bernhard Kaindl; +Cc: linux-kernel, gregkh, linux-pci
Bernhard?
cu
Adrian
On Wed, Jul 18, 2007 at 11:33:55PM -0400, pat-lkml wrote:
> I received:
>
> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
> 'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently
>
> in my dmesg in 2.6.22, and am reporting it. Context of message follows.
> Full dmesg output available on request. This is a Clevo d900t laptop
> motherboard, and everything works perfectly on it.
>
> Pat Erley
>
> --
>
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> migration_cost=22
> NET: Registered protocol family 16
> EISA bus registered
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: PCI BIOS revision 2.10 entry at 0xfd951, last bus=10
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> PCI quirk: region 1180-11bf claimed by ICH6 GPIO
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
> 'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
> ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *10
> ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
> ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *10
> ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
> ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 2.21 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> Time: tsc clocksource has been installed.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PCI Quirk / Hidden Bus Report
2007-07-30 11:55 ` Adrian Bunk
@ 2007-07-30 13:44 ` pat-lkml
2007-07-30 15:04 ` Jeffrey Hundstad
1 sibling, 0 replies; 4+ messages in thread
From: pat-lkml @ 2007-07-30 13:44 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Bernhard Kaindl, linux-kernel
Thanks for the bump. Any additional information needed?
Pat Erley
Adrian Bunk wrote:
> Bernhard?
>
> cu
> Adrian
>
>
> On Wed, Jul 18, 2007 at 11:33:55PM -0400, pat-lkml wrote:
>> I received:
>>
>> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
>> 'pci=assign-busses')
>> Please report the result to linux-kernel to fix this permanently
>>
>> in my dmesg in 2.6.22, and am reporting it. Context of message follows.
>> Full dmesg output available on request. This is a Clevo d900t laptop
>> motherboard, and everything works perfectly on it.
>>
>> Pat Erley
>>
>> --
>>
>> ENABLING IO-APIC IRQs
>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>> Brought up 2 CPUs
>> migration_cost=22
>> NET: Registered protocol family 16
>> EISA bus registered
>> ACPI: bus type pci registered
>> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>> PCI: Not using MMCONFIG.
>> PCI: PCI BIOS revision 2.10 entry at 0xfd951, last bus=10
>> PCI: Using configuration type 1
>> Setting up standard PCI resources
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>> PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>> PCI: Transparent bridge - 0000:00:1e.0
>> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
>> 'pci=assign-busses')
>> Please report the result to linux-kernel to fix this permanently
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *10
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *10
>> ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>> ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp: PnP ACPI: found 12 devices
>> ACPI: ACPI bus type pnp unregistered
>> SCSI subsystem initialized
>> libata version 2.21 loaded.
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
>> report
>> Time: tsc clocksource has been installed.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PCI Quirk / Hidden Bus Report
2007-07-30 11:55 ` Adrian Bunk
2007-07-30 13:44 ` pat-lkml
@ 2007-07-30 15:04 ` Jeffrey Hundstad
1 sibling, 0 replies; 4+ messages in thread
From: Jeffrey Hundstad @ 2007-07-30 15:04 UTC (permalink / raw)
To: Adrian Bunk; +Cc: pat-lkml, Bernhard Kaindl, linux-kernel, gregkh, linux-pci
[-- Attachment #1: Type: text/plain, Size: 4059 bytes --]
I also have the same type message in my dmesg from a Dell Latitude D820
with the latest BIOS:
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *3
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
Full dmesg attached.
Adrian Bunk wrote:
> Bernhard?
>
> cu
> Adrian
>
>
> On Wed, Jul 18, 2007 at 11:33:55PM -0400, pat-lkml wrote:
>
>> I received:
>>
>> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
>> 'pci=assign-busses')
>> Please report the result to linux-kernel to fix this permanently
>>
>> in my dmesg in 2.6.22, and am reporting it. Context of message follows.
>> Full dmesg output available on request. This is a Clevo d900t laptop
>> motherboard, and everything works perfectly on it.
>>
>> Pat Erley
>>
>> --
>>
>> ENABLING IO-APIC IRQs
>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>> Brought up 2 CPUs
>> migration_cost=22
>> NET: Registered protocol family 16
>> EISA bus registered
>> ACPI: bus type pci registered
>> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>> PCI: Not using MMCONFIG.
>> PCI: PCI BIOS revision 2.10 entry at 0xfd951, last bus=10
>> PCI: Using configuration type 1
>> Setting up standard PCI resources
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>> PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>> PCI: Transparent bridge - 0000:00:1e.0
>> PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try
>> 'pci=assign-busses')
>> Please report the result to linux-kernel to fix this permanently
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 11) *10
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *10
>> ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>> ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp: PnP ACPI: found 12 devices
>> ACPI: ACPI bus type pnp unregistered
>> SCSI subsystem initialized
>> libata version 2.21 loaded.
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
>> report
>> Time: tsc clocksource has been installed.
>>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
[-- Attachment #2: dmesg-latitude-d820.txt.gz --]
[-- Type: application/x-gzip, Size: 7788 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-07-30 15:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-19 3:33 PCI Quirk / Hidden Bus Report pat-lkml
2007-07-30 11:55 ` Adrian Bunk
2007-07-30 13:44 ` pat-lkml
2007-07-30 15:04 ` Jeffrey Hundstad
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).