From: "Rafał Bilski" <rafalbilski@interia.pl>
To: Jaroslav Kysela <perex@suse.cz>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: CS5530 Alsa driver fails
Date: Wed, 01 Aug 2007 01:04:55 +0200 [thread overview]
Message-ID: <46AFC017.8090805@interia.pl> (raw)
Hello,
Linux: 2.6.23-rc1-git3
Hardware: CX5530
After "modprobe snd-cs5530" I have:
CS5530: XpressAudio at 0x220
CS5530: MPU at 0x330
CS5530: IRQ: 9 DMA8: 0 DMA16: 5
sb: can't grab irq 9
CS5530: Could not create SoundBlaster
CS5530_Audio: probe of 0000:00:12.3 failed with error -16
Thank You
Rafał
~ $ cat /proc/interrupts
CPU0
0: 26624 XT-PIC-XT timer
2: 0 XT-PIC-XT cascade
4: 428 XT-PIC-XT serial
8: 0 XT-PIC-XT rtc
9: 10793 XT-PIC-XT ohci_hcd:usb1
10: 1326 XT-PIC-XT eth0
NMI: 0
ERR: 0
~ $ lspci -v
00:00.0 Host bridge: Cyrix Corporation PCI Master
Flags: bus master, medium devsel, latency 0
00:0f.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at f800 [size=256]
Memory at 10010000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
00:12.0 ISA bridge: Cyrix Corporation 5530 Legacy [Kahlua]
Flags: bus master, medium devsel, latency 0
00:12.1 Bridge: Cyrix Corporation 5530 SMI [Kahlua]
Flags: medium devsel
Memory at 40012000 (32-bit, non-prefetchable) [size=256]
00:12.2 IDE interface: Cyrix Corporation 5530 IDE [Kahlua] (prog-if 80 [Master])
Flags: medium devsel
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 1000 [disabled] [size=128]
00:12.3 Multimedia audio controller: Cyrix Corporation 5530 Audio [Kahlua]
Flags: medium devsel
Memory at 40011000 (32-bit, non-prefetchable) [size=128]
00:12.4 VGA compatible controller: Cyrix Corporation 5530 Video [Kahlua] (prog-if 00 [VGA])
Flags: medium devsel
Memory at 40010000 (32-bit, non-prefetchable) [size=4K]
00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 06) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation ZFMicro Chipset USB
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at 000cc000 (32-bit, non-prefetchable) [size=4K]
----------------------------------------------------------------------
Kobiety klamia o wiele skuteczniej niz mezczyzni.
Sprawdz, jak sie na nich poznac
>>>http://link.interia.pl/f1b16
next reply other threads:[~2007-07-31 23:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-31 23:04 Rafał Bilski [this message]
2007-07-31 23:53 ` CS5530 Alsa driver fails Alan Cox
2007-08-01 10:44 ` Takashi Iwai
2007-08-01 12:11 ` Rafał Bilski
-- strict thread matches above, loose matches on Subject: below --
2007-08-01 17:41 Ash Willis
2007-08-01 18:51 ` Rafał Bilski
2007-08-01 22:08 ` Alan Cox
2007-08-02 16:18 ` Rafał Bilski
2007-08-02 1:17 Ash Willis
2007-08-02 12:57 ` Alan Cox
2007-08-02 15:23 ` Jordan Crouse
2007-08-02 17:01 ` Alan Cox
2007-08-02 17:00 ` Jordan Crouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46AFC017.8090805@interia.pl \
--to=rafalbilski@interia.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox