Re: PROBLEM: Oops when using dm-crypt with dpt_i2o

Andrew Morton
2007-08-03T18:04:59Z

On Wed, 01 Aug 2007 20:45:08 +0200
Philipp T__lke <philipptoelke@web.de> wrote:

> Hello everybody,
>
> if I mount a dm-crypt-encrypted Harddisk/RAID-Array on an Adaptec 3200S,
> and produce load (for example with bonnie++) the kernel crashes.
>
> This is always reproducible. To reproduce simply mount an dm-crypt
> encrypted device and produce load -- I always used bonnie++.
>
> Unencrypted volumes work fine. Every kind of load I threw at the System
> worked fine.
>
> I would be very glad, if some kind of solution for this can be found.
>

Gee we get a lot of bug reports involving dm-crypt.

>
> The oopses:
>
> #v+
> BUG: unable to handle kernel paging request at virtual address 14001000
> printing eip:
> *pde = 00000000
> Oops: 0000 [#1]
> Modules linked in: dm_crypt dm_mod capability commoncap ipv6 pcspkr
> ppdev lp parport_pc parport rtc_cmos ppp_generic rtc_core rtc_lib
> i2c_viapro i2o_core i2c_core via_ircc irda crc_ccitt sg shpchp
> pci_hotplug evdev thermal processor fan button battery ac slhc r8169
> usbcore jfs sr_mod cdrom sd_mod sym53c8xx dpt_i2o ata_generic pata_via
> libata
> CPU: 0
> EIP: 0060:[<14001000>] Not tainted VLI
> EFLAGS: 00010082 (2.6.22.1 #2)
> EIP is at 0x14001000
> eax: 00000000 ebx: 14001000 ecx: 00000000 edx: 0002bc00
> esi: 5b51c000 edi: 14001000 ebp: 5b51b000 esp: dfe21f08
> ds: 007b es: 007b fs: 0000 gs: 0000 ss: 0068
> Process kblockd/0 (pid: 31, ti=dfe20000 task=c1cfca50 task.ti=dfe20000)
>
> Stack: 5b51a000 14001000 5b519000 14001000 5b518000 d4001000 5b517000
> 00000086
> c1d0b534 c1d0b424 c1d0b490 c1da7834 c1da7834 c1da7834 00000000 07000000
> c022aac5 c1da78b8 c022b696 c022c762 00000046 c1d0b534 c1d0b424 c1d0b490
>
> Call Trace:
> [<c022aac5>] __generic_unplug_device+0x25/0x30
> [<c022b696>] generic_unplug_device+0x6/0x10
> [<c022c762>] blk_unplug_work+0x42/0xa0
> [<c022c720>] blk_unplug_work+0x0/0xa0
> [<c012a307>] run_workqueue+0x97/0x110
> [<c012aa00>] worker_thread+0x0/0xe0
> [<c012aa7d>] worker_thread+0x7d/0xe0
> [<c012d5e0>] autoremove_wake_function+0x0/0x40
> [<c012aa00>] worker_thread+0x0/0xe0
> [<c012d292>] kthread+0x42/0x70
> [<c012d250>] kthread+0x0/0x70
> [<c01041df>] kernel_thread_helper+0x7/0x18
> =======================
> Code: Bad EIP value.
> EIP: [<14001000>] 0x14001000 SS:ESP 0068:dfe21f08
>

So it looks like q->request_fn points at 0x14001000, which is in outer
space.

I wonder how that could happen, in the middle of heavy IO operations.
Possibly a memory scribble. I'd suggest you enable CONFIG_SLAB,
CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC. You could also try switching
from CONFIG_SLAB to CONFIG_SLUB, then enable CONFIG_SLUB_DEBUG.