...

> +pci-align-bar-settings-for-legacy-mode-ide.patch
> +pci-align-bar-settings-for-legacy-mode-ide-fix.patch
> 
>  2.6.23 material, but these belong to subssytem trees
>

...

 
These broke the IDE controller , using libata on my Dell Workstation .. 

Reverting both fixes the problem.


..

[   28.828484] 0000:00:1f.1: cannot adjust BAR0 (not I/O)
[   28.828487] 0000:00:1f.1: cannot adjust BAR1 (not I/O)
[   28.828489] 0000:00:1f.1: cannot adjust BAR2 (not I/O)
[   28.828491] 0000:00:1f.1: cannot adjust BAR3 (not I/O)
...

[   44.564308] ata_piix 0000:00:1f.1: version 2.11
[   44.564365] ata_piix 0000:00:1f.1: no available native port

...

And my CDROM and second ide disc gone.

$ lspci -vvvxxx

...

00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 04) (prog-if 80 [Master])
        Subsystem: Dell Unknown device 00d8
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        Region 4: I/O ports at ffa0 [size=16]
00: 86 80 4b 24 05 00 80 02 04 80 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 28 10 d8 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 e3 03 e3 00 00 00 00 05 00 01 02 00 00 00 00
50: 00 00 00 00 50 10 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
 
...

config is attched.


Regards,

Gabriel C