* Reporting result of pci=assign-busses to lkml
@ 2007-08-11 3:11 Russ Dill
2007-08-15 14:23 ` Mathis Ahrens
0 siblings, 1 reply; 2+ messages in thread
From: Russ Dill @ 2007-08-11 3:11 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 34 bytes --]
This is from an Acer Ferrari 5000
[-- Attachment #2: dmesg.orig --]
[-- Type: application/octet-stream, Size: 30200 bytes --]
[ 0.000000] Linux version 2.6.22-9-generic (buildd@yellow) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:20:35 GMT 2007 (Ubuntu 2.6.22-9.25-generic)
[ 0.000000] Command line: root=UUID=3485c784-75ba-4265-8cd1-5331937091a0 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe99000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe99000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7880, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 7FE90C69, 003C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FE98B58, 0074 (r1 ATI Bowfin 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 7FE90CA5, 7EB3 (r1 ATI SB460 6040000 MSFT 2000002)
[ 0.000000] ACPI: FACS 7FE99FC0, 0040
[ 0.000000] ACPI: SSDT 7FE98BCC, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 7FE98DD2, 0054 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 7FE98E26, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FE98E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 7FE98E8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe90000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe90000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 523920
[ 0.000000] On node 0 totalpages: 523821
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1126 pages reserved
[ 0.000000] DMA zone: 2815 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7106 pages used for memmap
[ 0.000000] DMA32 zone: 512718 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515533
[ 0.000000] Kernel command line: root=UUID=3485c784-75ba-4265-8cd1-5331937091a0 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 21.383420] time.c: Detected 2000.130 MHz processor.
[ 21.384675] Console: colour VGA+ 80x25
[ 21.384690] Checking aperture...
[ 21.384693] CPU 0: aperture @ 9c16000000 size 32 MB
[ 21.384695] Aperture too small (32 MB)
[ 21.396606] No AGP bridge found
[ 21.413311] Memory: 2054720k/2095680k available (2271k kernel code, 40564k reserved, 1180k data, 300k init)
[ 21.413366] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 21.493213] Calibrating delay using timer specific routine.. 4004.20 BogoMIPS (lpj=8008416)
[ 21.493243] Security Framework v1.0.0 initialized
[ 21.493249] SELinux: Disabled at boot.
[ 21.493402] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 21.494444] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 21.494950] Mount-cache hash table entries: 256
[ 21.495069] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 21.495071] CPU: L2 Cache: 512K (64 bytes/line)
[ 21.495074] CPU 0/0 -> Node 0
[ 21.495076] CPU: Physical Processor ID: 0
[ 21.495077] CPU: Processor Core ID: 0
[ 21.495094] SMP alternatives: switching to UP code
[ 21.495315] Early unpacking initramfs... done
[ 21.785543] ACPI: Core revision 20070126
[ 21.785620] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 22.280735] Using local APIC timer interrupts.
[ 22.330640] result 12500809
[ 22.330642] Detected 12.500 MHz APIC timer.
[ 22.331722] SMP alternatives: switching to SMP code
[ 22.331815] Booting processor 1/2 APIC 0x1
[ 22.340842] Initializing CPU#1
[ 22.418454] Calibrating delay using timer specific routine.. 4000.44 BogoMIPS (lpj=8000883)
[ 22.418461] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.418463] CPU: L2 Cache: 512K (64 bytes/line)
[ 22.418465] CPU 1/1 -> Node 0
[ 22.418467] CPU: Physical Processor ID: 0
[ 22.418468] CPU: Processor Core ID: 1
[ 22.418547] AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 22.423492] Brought up 2 CPUs
[ 23.119769] migration_cost=165
[ 23.120979] NET: Registered protocol family 16
[ 23.121057] ACPI: bus type pci registered
[ 23.121067] PCI: Using configuration type 1
[ 23.121069] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 23.121071] mtrr: probably your BIOS does not setup all CPUs.
[ 23.121072] mtrr: corrected configuration.
[ 23.121967] ACPI: EC: Look up EC in DSDT
[ 23.123582] ACPI: EC: GPE=0x14, ports=0x66, 0x62
[ 23.140476] ACPI: System BIOS is requesting _OSI(Linux)
[ 23.140479] ACPI: Please test with "acpi_osi=!Linux"
[ 23.140480] Please send dmidecode to linux-acpi@vger.kernel.org
[ 23.140862] ACPI: Interpreter enabled
[ 23.140865] ACPI: (supports S0 S3 S4 S5)
[ 23.140882] ACPI: Using IOAPIC for interrupt routing
[ 23.146027] ACPI: EC: GPE=0x14, ports=0x66, 0x62
[ 23.146069] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.146074] PCI: Probing PCI hardware (bus 00)
[ 23.147777] PCI: Transparent bridge - 0000:00:14.4
[ 23.147851] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
[ 23.147854] Please report the result to linux-kernel to fix this permanently
[ 23.147896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.148066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 23.148187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 23.148314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 23.148438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 23.148569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 23.151882] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 23.152007] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 23.152127] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 23.152247] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 23.152367] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 23.152485] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 23.152605] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 23.152725] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 23.152846] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 23.152928] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.152937] pnp: PnP ACPI init
[ 23.152945] ACPI: bus type pnp registered
[ 23.156382] pnp: PnP ACPI: found 13 devices
[ 23.156384] ACPI: ACPI bus type pnp unregistered
[ 23.156446] PCI: Using ACPI for IRQ routing
[ 23.156448] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.156455] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 23.156510] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 23.156561] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 23.156611] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 23.156661] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0
[ 23.156713] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 23.156763] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 23.156924] NET: Registered protocol family 8
[ 23.156926] NET: Registered protocol family 20
[ 23.157039] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 23.157042] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 23.157046] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 23.157053] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 23.157056] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[ 23.157061] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 23.157065] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 23.157068] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
[ 23.157465] PCI: Bridge: 0000:00:02.0
[ 23.157468] IO window: 9000-9fff
[ 23.157471] MEM window: b0100000-b01fffff
[ 23.157474] PREFETCH window: c0000000-cfffffff
[ 23.157477] PCI: Bridge: 0000:00:04.0
[ 23.157478] IO window: disabled.
[ 23.157480] MEM window: disabled.
[ 23.157482] PREFETCH window: disabled.
[ 23.157485] PCI: Bridge: 0000:00:05.0
[ 23.157486] IO window: disabled.
[ 23.157488] MEM window: disabled.
[ 23.157490] PREFETCH window: disabled.
[ 23.157492] PCI: Bridge: 0000:00:06.0
[ 23.157494] IO window: disabled.
[ 23.157496] MEM window: disabled.
[ 23.157498] PREFETCH window: disabled.
[ 23.157501] PCI: Bridge: 0000:00:07.0
[ 23.157502] IO window: disabled.
[ 23.157505] MEM window: b0200000-b02fffff
[ 23.157507] PREFETCH window: disabled.
[ 23.157512] PCI: Bus 9, cardbus bridge: 0000:08:09.0
[ 23.157514] IO window: 00002000-000020ff
[ 23.157522] IO window: 00002400-000024ff
[ 23.157527] PREFETCH window: 88000000-8bffffff
[ 23.157533] MEM window: 90000000-93ffffff
[ 23.157539] PCI: Bridge: 0000:00:14.4
[ 23.157542] IO window: 2000-2fff
[ 23.157549] MEM window: b0300000-b03fffff
[ 23.157554] PREFETCH window: 88000000-8bffffff
[ 23.157567] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 23.157574] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 23.157581] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 23.157587] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 23.157593] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 23.157616] PCI: Enabling device 0000:08:09.0 (0000 -> 0003)
[ 23.157624] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.157692] NET: Registered protocol family 2
[ 23.161082] Time: acpi_pm clocksource has been installed.
[ 23.209356] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 23.210127] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 23.212911] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 23.213437] TCP: Hash tables configured (established 262144 bind 65536)
[ 23.213441] TCP reno registered
[ 23.229360] checking if image is initramfs... it is
[ 23.797949] Freeing initrd memory: 7219k freed
[ 23.801357] Simple Boot Flag at 0x36 set to 0x1
[ 23.801938] audit: initializing netlink socket (disabled)
[ 23.801948] audit(1186800071.928:1): initialized
[ 23.803996] VFS: Disk quotas dquot_6.5.1
[ 23.804049] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 23.804135] io scheduler noop registered
[ 23.804137] io scheduler anticipatory registered
[ 23.804139] io scheduler deadline registered
[ 23.804227] io scheduler cfq registered (default)
[ 23.804231] PCI: MSI quirk detected. MSI deactivated.
[ 23.805000] Boot video device is 0000:01:00.0
[ 23.805152] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 23.805171] assign_interrupt_mode Found MSI capability
[ 23.805174] Allocate Port Service[0000:00:02.0:pcie00]
[ 23.805240] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 23.805258] assign_interrupt_mode Found MSI capability
[ 23.805261] Allocate Port Service[0000:00:04.0:pcie00]
[ 23.805298] Allocate Port Service[0000:00:04.0:pcie02]
[ 23.805351] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 23.805369] assign_interrupt_mode Found MSI capability
[ 23.805372] Allocate Port Service[0000:00:05.0:pcie00]
[ 23.805403] Allocate Port Service[0000:00:05.0:pcie02]
[ 23.805454] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 23.805473] assign_interrupt_mode Found MSI capability
[ 23.805476] Allocate Port Service[0000:00:06.0:pcie00]
[ 23.805510] Allocate Port Service[0000:00:06.0:pcie02]
[ 23.805566] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 23.805585] assign_interrupt_mode Found MSI capability
[ 23.805587] Allocate Port Service[0000:00:07.0:pcie00]
[ 23.805619] Allocate Port Service[0000:00:07.0:pcie02]
[ 23.830094] Real Time Clock Driver v1.12ac
[ 23.830179] Linux agpgart interface v0.102 (c) Dave Jones
[ 23.830181] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.830807] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.831494] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.831622] input: Macintosh mouse button emulation as /class/input/input0
[ 23.831696] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 23.835401] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 23.836402] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.836407] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 23.836410] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 23.836412] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 23.836415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 23.836573] mice: PS/2 mouse device common for all mice
[ 23.836710] TCP cubic registered
[ 23.836768] NET: Registered protocol family 1
[ 23.836965] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 23.836975] Freeing unused kernel memory: 300k freed
[ 23.917912] input: AT Translated Set 2 keyboard as /class/input/input1
[ 25.010522] AppArmor: AppArmor initialized
[ 25.010530] audit(1186800073.140:2): AppArmor initialized
[ 25.010532]
[ 25.014789] AppArmor: Registered secondary security module: capability.
[ 25.014794] Capability LSM initialized as secondary
[ 25.020696] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 25.025013] ACPI: Thermal Zone [THRM] (35 C)
[ 25.521649] SCSI subsystem initialized
[ 25.526477] libata version 2.21 loaded.
[ 25.527677] sata_sil 0000:00:12.0: version 2.2
[ 25.527717] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[ 25.527727] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 25.528047] scsi0 : sata_sil
[ 25.528096] scsi1 : sata_sil
[ 25.528120] ata1: SATA max UDMA/100 cmd 0xffffc20000aac080 ctl 0xffffc20000aac08a bmdma 0xffffc20000aac000 irq 22
[ 25.528126] ata2: SATA max UDMA/100 cmd 0xffffc20000aac0c0 ctl 0xffffc20000aac0ca bmdma 0xffffc20000aac008 irq 22
[ 25.531692] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 25.531698] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 25.536530] usbcore: registered new interface driver usbfs
[ 25.536556] usbcore: registered new interface driver hub
[ 25.589046] usbcore: registered new device driver usb
[ 25.593779] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 25.993957] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 26.001530] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 26.001534] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 26.017484] ata1.00: configured for UDMA/100
[ 26.329375] ata2: SATA link down (SStatus 0 SControl 310)
[ 26.329476] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 26.332490] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 26.332513] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.332525] ATIIXP: chipset revision 128
[ 26.332527] ATIIXP: not 100% native mode: will probe irqs later
[ 26.332537] ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:DMA, hdb:pio
[ 26.332551] ATIIXP: simplex device: DMA disabled
[ 26.332552] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
[ 26.332556] Probing IDE interface ide0...
[ 26.345401] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 26.345412] sd 0:0:0:0: [sda] Write Protect is off
[ 26.345414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.345427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.345481] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 26.345488] sd 0:0:0:0: [sda] Write Protect is off
[ 26.345490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.345502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.345506] sda: sda1 < sda5 sda6 sda7 sda8 sda9 >
[ 26.442689] sd 0:0:0:0: [sda] Attached SCSI disk
[ 26.447326] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.695575] swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 26.695582] swsusp: Basic memory bitmaps created
[ 26.723277] swsusp: Basic memory bitmaps freed
[ 26.760412] kjournald starting. Commit interval 5 seconds
[ 26.759361] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.069287] hda: TOSHIBA DVDW/HD TS-L802A, ATAPI CD/DVD-ROM drive
[ 27.405225] hda: selected mode 0x42
[ 27.408761] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 27.419850] Probing IDE interface ide1...
[ 27.981171] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 27.981332] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 27.981493] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 27.981523] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0005000
[ 28.037107] usb usb1: configuration #1 chosen from 1 choice
[ 28.037132] hub 1-0:1.0: USB hub found
[ 28.037145] hub 1-0:1.0: 4 ports detected
[ 28.144876] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.145043] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 28.145095] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 28.145119] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0006000
[ 28.204776] usb usb2: configuration #1 chosen from 1 choice
[ 28.204798] hub 2-0:1.0: USB hub found
[ 28.204812] hub 2-0:1.0: 4 ports detected
[ 28.308618] ACPI: PCI Interrupt 0000:08:09.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 28.358747] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[b0315000-b03157ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 28.357778] tg3.c:v3.77 (May 31, 2007)
[ 28.357807] ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 28.358082] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.358201] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 28.358258] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 28.358312] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0007000
[ 28.358325] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.358446] usb usb3: configuration #1 chosen from 1 choice
[ 28.358472] hub 3-0:1.0: USB hub found
[ 28.358478] hub 3-0:1.0: 8 ports detected
[ 28.438044] eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:36:a6:54:f8
[ 28.438050] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 28.438053] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 29.187813] usb 3-8: new high speed USB device using ehci_hcd and address 3
[ 29.359391] usb 3-8: configuration #1 chosen from 1 choice
[ 29.666825] usb 1-4: new full speed USB device using ohci_hcd and address 3
[ 29.880502] usb 1-4: configuration #1 chosen from 1 choice
[ 35.439545] PM: Writing back config space on device 0000:08:04.0 at offset c (was ff7f0000, writing 0)
[ 35.439554] PM: Writing back config space on device 0000:08:04.0 at offset b (was 3ed173b, writing 10a1025)
[ 35.439576] PM: Writing back config space on device 0000:08:04.0 at offset 3 (was 0, writing 4008)
[ 35.439583] PM: Writing back config space on device 0000:08:04.0 at offset 2 (was 2000000, writing 2000003)
[ 35.439591] PM: Writing back config space on device 0000:08:04.0 at offset 1 (was 2b00000, writing 2b00006)
[ 35.439598] PM: Writing back config space on device 0000:08:04.0 at offset 0 (was 3ed173b, writing 169c14e4)
[ 36.423424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.435335] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 36.802612] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 36.863817] Yenta: CardBus bridge found at 0000:08:09.0 [1025:010a]
[ 36.863845] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 36.863847] Yenta: Routing CardBus interrupts to PCI
[ 36.863854] Yenta TI: socket 0000:08:09.0, mfunc 0x01321b22, devctl 0x66
[ 36.866292] ath_hal: module license 'Proprietary' taints kernel.
[ 36.867028] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 37.095953] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 37.095959] Socket status: 30000006
[ 37.095962] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 37.095969] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 37.095975] pcmcia: parent PCI bridge Memory window: 0xb0300000 - 0xb03fffff
[ 37.095978] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 37.096823] ACPI: PCI Interrupt 0000:08:09.2[A] -> GSI 20 (level, low) -> IRQ 20
[ 37.124739] wlan: 0.8.4.2 (0.9.3.1)
[ 37.165697] sdhci: Secure Digital Host Controller Interface driver
[ 37.165701] sdhci: Copyright(c) Pierre Ossman
[ 37.165747] sdhci: SDHCI controller found at 0000:08:09.3 [104c:803c] (rev 0)
[ 37.165771] ACPI: PCI Interrupt 0000:08:09.3[A] -> GSI 20 (level, low) -> IRQ 20
[ 37.166026] mmc0: SDHCI at 0xb0315800 irq 20 DMA
[ 37.195993] irda_init()
[ 37.196011] NET: Registered protocol family 23
[ 37.246141] input: PC Speaker as /class/input/input2
[ 37.260951] NET: Registered protocol family 17
[ 37.288728] Bluetooth: Core ver 2.11
[ 37.288781] NET: Registered protocol family 31
[ 37.288783] Bluetooth: HCI device and connection manager initialized
[ 37.288787] Bluetooth: HCI socket layer initialized
[ 37.356974] Bluetooth: HCI USB driver ver 2.9
[ 37.386749] ath_pci: 0.9.4.5 (0.9.3.1)
[ 37.386799] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 37.386812] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 37.995024] hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 37.995034] Uniform CD-ROM driver Revision: 3.20
[ 38.020813] usbcore: registered new interface driver hci_usb
[ 38.063043] Linux video capture interface: v2.00
[ 38.101245] ath_rate_sample: 1.2 (0.9.3.1)
[ 38.110818] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 38.154157] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 38.154166] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 38.154170] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 38.154177] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 38.154181] wifi0: mac 10.3 phy 6.1 radio 10.2
[ 38.154185] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 38.154187] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 38.154189] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 38.154191] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 38.154193] wifi0: Use hw queue 8 for CAB traffic
[ 38.154195] wifi0: Use hw queue 9 for beacons
[ 38.177308] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 38.179850] parport_pc 00:0c: reported by Plug and Play ACPI
[ 38.180012] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 38.201760] wifi0: Atheros 5424/2424: mem=0xb0200000, irq=19
[ 38.215851] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 38.282380] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 38.282432] nsc-ircc, chip->init
[ 38.282446] nsc-ircc, Found chip at base=0x02e
[ 38.282487] nsc-ircc, driver loaded (Dag Brattli)
[ 38.282621] IrDA: Registered device irda0
[ 38.282691] nsc-ircc, Found dongle: Supports SIR Mode only
[ 38.282741] nsc-ircc, chip->init
[ 38.282754] nsc-ircc, Found chip at base=0x02e
[ 38.282795] nsc-ircc, driver loaded (Dag Brattli)
[ 38.282799] nsc_ircc_open(), can't get iobase of 0x2f8
[ 38.442318] usbcore: registered new interface driver gspca
[ 38.442324] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 38.464876] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 39.544645] fuse init (API version 7.8)
[ 39.584086] lp0: using parport0 (interrupt-driven).
[ 39.698826] Adding 4160792k swap on /dev/disk/by-uuid/52d812df-c79c-4977-bbaf-70c57045a98b. Priority:-1 extents:1 across:4160792k
[ 40.059398] EXT3 FS on sda8, internal journal
[ 40.605378] kjournald starting. Commit interval 5 seconds
[ 40.614408] EXT3 FS on sda7, internal journal
[ 40.614412] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.762311] AppArmor: Unregistered secondary security module: capability
[ 44.775405] ACPI: Battery Slot [BAT1] (battery present)
[ 44.969090] ACPI: ACPI Dock Station Driver
[ 44.983663] input: Power Button (FF) as /class/input/input4
[ 44.983926] ACPI: Power Button (FF) [PWRF]
[ 44.985037] input: Power Button (CM) as /class/input/input5
[ 44.985294] ACPI: Power Button (CM) [PWRB]
[ 45.008236] input: Lid Switch as /class/input/input6
[ 45.012541] ACPI: Lid Switch [LID]
[ 45.029725] input: Sleep Button (CM) as /class/input/input7
[ 45.029766] ACPI: Sleep Button (CM) [SLPB]
[ 45.040102] ACPI: AC Adapter [ACAD] (off-line)
[ 45.106221] ACPI: \_SB_.PCI0.IDE_.PRID.PBAY: found ejectable bay
[ 45.106226] ACPI: \_SB_.PCI0.IDE_.PRID.PBAY: Adding notify handler
[ 45.106265] ACPI: Bay [\_SB_.PCI0.IDE_.PRID.PBAY] Added
[ 45.330323] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (version 2.00.00)
[ 45.331585] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
[ 45.331590] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14
[ 45.331593] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x16
[ 45.331596] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 50.321324] [fglrx] Maximum main memory to use for locked dma buffers: 1886 MBytes.
[ 50.321346] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 50.402917] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 51.850962] AppArmor: Registered secondary security module: capability.
[ 51.850967] Capability LSM initialized as secondary
[ 52.049992] Bluetooth: L2CAP ver 2.8
[ 52.049997] Bluetooth: L2CAP socket layer initialized
[ 52.115080] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 52.223479] Bluetooth: RFCOMM socket layer initialized
[ 52.223572] Bluetooth: RFCOMM TTY layer initialized
[ 52.223575] Bluetooth: RFCOMM ver 1.8
[ 52.729855] [fglrx] total GART = 130023424
[ 52.729862] [fglrx] free GART = 114032640
[ 52.729864] [fglrx] max single GART = 114032640
[ 52.729866] [fglrx] total LFB = 268304384
[ 52.729869] [fglrx] free LFB = 244305920
[ 52.729871] [fglrx] max single LFB = 244305920
[ 52.729873] [fglrx] total Inv = 0
[ 52.729874] [fglrx] free Inv = 0
[ 52.729876] [fglrx] max single Inv = 0
[ 52.729877] [fglrx] total TIM = 0
[ 58.484809] NET: Registered protocol family 10
[ 58.484968] lo: Disabled Privacy Extensions
[-- Attachment #3: dmesg.assign-busses --]
[-- Type: application/octet-stream, Size: 29825 bytes --]
[ 0.000000] Linux version 2.6.22-9-generic (buildd@yellow) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:20:35 GMT 2007 (Ubuntu 2.6.22-9.25-generic)
[ 0.000000] Command line: root=UUID=3485c784-75ba-4265-8cd1-5331937091a0 ro quiet splash pci=assign-busses
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[ 0.000000] BIOS-e820: 000000007fe90000 - 000000007fe99000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe99000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7880, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 7FE90C69, 003C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FE98B58, 0074 (r1 ATI Bowfin 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 7FE90CA5, 7EB3 (r1 ATI SB460 6040000 MSFT 2000002)
[ 0.000000] ACPI: FACS 7FE99FC0, 0040
[ 0.000000] ACPI: SSDT 7FE98BCC, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 7FE98DD2, 0054 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 7FE98E26, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FE98E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 7FE98E8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe90000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523920) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe90000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 523920
[ 0.000000] On node 0 totalpages: 523821
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1126 pages reserved
[ 0.000000] DMA zone: 2815 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7106 pages used for memmap
[ 0.000000] DMA32 zone: 512718 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515533
[ 0.000000] Kernel command line: root=UUID=3485c784-75ba-4265-8cd1-5331937091a0 ro quiet splash pci=assign-busses
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 24.437470] time.c: Detected 2000.155 MHz processor.
[ 24.438726] Console: colour VGA+ 80x25
[ 24.438741] Checking aperture...
[ 24.438744] CPU 0: aperture @ 9016000000 size 32 MB
[ 24.438746] Aperture too small (32 MB)
[ 24.450697] No AGP bridge found
[ 24.467403] Memory: 2054720k/2095680k available (2271k kernel code, 40564k reserved, 1180k data, 300k init)
[ 24.467458] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 24.547263] Calibrating delay using timer specific routine.. 4004.58 BogoMIPS (lpj=8009178)
[ 24.547292] Security Framework v1.0.0 initialized
[ 24.547299] SELinux: Disabled at boot.
[ 24.547452] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 24.548493] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.549000] Mount-cache hash table entries: 256
[ 24.549118] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.549121] CPU: L2 Cache: 512K (64 bytes/line)
[ 24.549123] CPU 0/0 -> Node 0
[ 24.549125] CPU: Physical Processor ID: 0
[ 24.549127] CPU: Processor Core ID: 0
[ 24.549144] SMP alternatives: switching to UP code
[ 24.549365] Early unpacking initramfs... done
[ 24.839658] ACPI: Core revision 20070126
[ 24.839735] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.335235] Using local APIC timer interrupts.
[ 25.385140] result 12500967
[ 25.385142] Detected 12.500 MHz APIC timer.
[ 25.385769] SMP alternatives: switching to SMP code
[ 25.385862] Booting processor 1/2 APIC 0x1
[ 25.395351] Initializing CPU#1
[ 25.472964] Calibrating delay using timer specific routine.. 4000.39 BogoMIPS (lpj=8000786)
[ 25.472970] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 25.472972] CPU: L2 Cache: 512K (64 bytes/line)
[ 25.472975] CPU 1/1 -> Node 0
[ 25.472976] CPU: Physical Processor ID: 0
[ 25.472978] CPU: Processor Core ID: 1
[ 25.473056] AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 25.477545] Brought up 2 CPUs
[ 26.174245] migration_cost=163
[ 26.174994] NET: Registered protocol family 16
[ 26.175072] ACPI: bus type pci registered
[ 26.175082] PCI: Using configuration type 1
[ 26.175084] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 26.175086] mtrr: probably your BIOS does not setup all CPUs.
[ 26.175087] mtrr: corrected configuration.
[ 26.175979] ACPI: EC: Look up EC in DSDT
[ 26.177596] ACPI: EC: GPE=0x14, ports=0x66, 0x62
[ 26.194956] ACPI: System BIOS is requesting _OSI(Linux)
[ 26.194958] ACPI: Please test with "acpi_osi=!Linux"
[ 26.194959] Please send dmidecode to linux-acpi@vger.kernel.org
[ 26.195338] ACPI: Interpreter enabled
[ 26.195340] ACPI: (supports S0 S3 S4 S5)
[ 26.195358] ACPI: Using IOAPIC for interrupt routing
[ 26.200502] ACPI: EC: GPE=0x14, ports=0x66, 0x62
[ 26.200544] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 26.200550] PCI: Probing PCI hardware (bus 00)
[ 26.202285] PCI: Transparent bridge - 0000:00:14.4
[ 26.202373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.202542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 26.202664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 26.202790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 26.202915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 26.203045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 26.206349] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 26.206475] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 26.206596] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 26.206716] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 26.206836] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 26.206956] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 26.207075] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 26.207193] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 26.207315] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 26.207395] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.207404] pnp: PnP ACPI init
[ 26.207412] ACPI: bus type pnp registered
[ 26.210845] pnp: PnP ACPI: found 13 devices
[ 26.210847] ACPI: ACPI bus type pnp unregistered
[ 26.210908] PCI: Using ACPI for IRQ routing
[ 26.210910] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 26.210917] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 26.210973] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 26.211024] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 26.211074] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 26.211124] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0
[ 26.211174] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 26.211225] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 26.211385] NET: Registered protocol family 8
[ 26.211387] NET: Registered protocol family 20
[ 26.211499] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 26.211503] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 26.211506] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 26.211513] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 26.211516] pnp: 00:08: ioport range 0x220-0x22f has been reserved
[ 26.211521] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 26.211525] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 26.211528] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
[ 26.211850] PCI: Bridge: 0000:00:02.0
[ 26.211853] IO window: 9000-9fff
[ 26.211856] MEM window: b0100000-b01fffff
[ 26.211859] PREFETCH window: c0000000-cfffffff
[ 26.211862] PCI: Bridge: 0000:00:04.0
[ 26.211863] IO window: disabled.
[ 26.211866] MEM window: disabled.
[ 26.211868] PREFETCH window: disabled.
[ 26.211870] PCI: Bridge: 0000:00:05.0
[ 26.211871] IO window: disabled.
[ 26.211874] MEM window: disabled.
[ 26.211875] PREFETCH window: disabled.
[ 26.211878] PCI: Bridge: 0000:00:06.0
[ 26.211879] IO window: disabled.
[ 26.211881] MEM window: disabled.
[ 26.211883] PREFETCH window: disabled.
[ 26.211886] PCI: Bridge: 0000:00:07.0
[ 26.211887] IO window: disabled.
[ 26.211890] MEM window: b0200000-b02fffff
[ 26.211892] PREFETCH window: disabled.
[ 26.211897] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[ 26.211899] IO window: 00002000-000020ff
[ 26.211907] IO window: 00002400-000024ff
[ 26.211913] PREFETCH window: 88000000-8bffffff
[ 26.211919] MEM window: 90000000-93ffffff
[ 26.211924] PCI: Bridge: 0000:00:14.4
[ 26.211928] IO window: 2000-2fff
[ 26.211934] MEM window: b0300000-b03fffff
[ 26.211939] PREFETCH window: 88000000-8bffffff
[ 26.211954] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.211961] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 26.211967] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 26.211974] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 26.211980] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 26.212004] PCI: Enabling device 0000:06:09.0 (0000 -> 0003)
[ 26.212011] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 26.212079] NET: Registered protocol family 2
[ 26.215591] Time: acpi_pm clocksource has been installed.
[ 26.260049] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 26.260889] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 26.263693] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 26.264193] TCP: Hash tables configured (established 262144 bind 65536)
[ 26.264197] TCP reno registered
[ 26.280056] checking if image is initramfs... it is
[ 26.848654] Freeing initrd memory: 7219k freed
[ 26.852067] Simple Boot Flag at 0x36 set to 0x1
[ 26.852653] audit: initializing netlink socket (disabled)
[ 26.852663] audit(1186800694.924:1): initialized
[ 26.854710] VFS: Disk quotas dquot_6.5.1
[ 26.854762] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 26.854850] io scheduler noop registered
[ 26.854852] io scheduler anticipatory registered
[ 26.854854] io scheduler deadline registered
[ 26.854941] io scheduler cfq registered (default)
[ 26.854945] PCI: MSI quirk detected. MSI deactivated.
[ 26.855714] Boot video device is 0000:01:00.0
[ 26.855865] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.855884] assign_interrupt_mode Found MSI capability
[ 26.855887] Allocate Port Service[0000:00:02.0:pcie00]
[ 26.855951] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 26.855969] assign_interrupt_mode Found MSI capability
[ 26.855971] Allocate Port Service[0000:00:04.0:pcie00]
[ 26.856009] Allocate Port Service[0000:00:04.0:pcie02]
[ 26.856061] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 26.856080] assign_interrupt_mode Found MSI capability
[ 26.856082] Allocate Port Service[0000:00:05.0:pcie00]
[ 26.856113] Allocate Port Service[0000:00:05.0:pcie02]
[ 26.856164] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 26.856183] assign_interrupt_mode Found MSI capability
[ 26.856185] Allocate Port Service[0000:00:06.0:pcie00]
[ 26.856220] Allocate Port Service[0000:00:06.0:pcie02]
[ 26.856276] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 26.856294] assign_interrupt_mode Found MSI capability
[ 26.856297] Allocate Port Service[0000:00:07.0:pcie00]
[ 26.856328] Allocate Port Service[0000:00:07.0:pcie02]
[ 26.880557] Real Time Clock Driver v1.12ac
[ 26.880644] Linux agpgart interface v0.102 (c) Dave Jones
[ 26.880646] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.881274] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.881967] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.882095] input: Macintosh mouse button emulation as /class/input/input0
[ 26.882173] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 26.885889] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 26.886888] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.886893] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 26.886896] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 26.886899] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 26.886901] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 26.887070] mice: PS/2 mouse device common for all mice
[ 26.887213] TCP cubic registered
[ 26.887269] NET: Registered protocol family 1
[ 26.887468] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 26.887479] Freeing unused kernel memory: 300k freed
[ 26.968640] input: AT Translated Set 2 keyboard as /class/input/input1
[ 28.060465] AppArmor: AppArmor initialized
[ 28.060474] audit(1186800696.136:2): AppArmor initialized
[ 28.060475]
[ 28.064185] AppArmor: Registered secondary security module: capability.
[ 28.064189] Capability LSM initialized as secondary
[ 28.070644] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 28.073897] ACPI: Thermal Zone [THRM] (58 C)
[ 28.588086] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.588092] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 28.588888] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 28.588908] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.588920] ATIIXP: chipset revision 128
[ 28.588922] ATIIXP: not 100% native mode: will probe irqs later
[ 28.588931] ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:DMA, hdb:pio
[ 28.588944] ATIIXP: simplex device: DMA disabled
[ 28.588946] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
[ 28.588950] Probing IDE interface ide0...
[ 28.601901] usbcore: registered new interface driver usbfs
[ 28.601925] usbcore: registered new interface driver hub
[ 28.601949] usbcore: registered new device driver usb
[ 28.603272] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 28.610277] SCSI subsystem initialized
[ 28.616334] libata version 2.21 loaded.
[ 29.324002] hda: TOSHIBA DVDW/HD TS-L802A, ATAPI CD/DVD-ROM drive
[ 29.659944] hda: selected mode 0x42
[ 29.662993] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 29.675406] Probing IDE interface ide1...
[ 30.238371] sata_sil 0000:00:12.0: version 2.2
[ 30.238408] PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
[ 30.238417] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 30.238704] scsi0 : sata_sil
[ 30.238761] scsi1 : sata_sil
[ 30.238788] ata1: SATA max UDMA/100 cmd 0xffffc20000aac080 ctl 0xffffc20000aac08a bmdma 0xffffc20000aac000 irq 22
[ 30.238795] ata2: SATA max UDMA/100 cmd 0xffffc20000aac0c0 ctl 0xffffc20000aac0ca bmdma 0xffffc20000aac008 irq 22
[ 30.706431] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 30.715054] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 30.715057] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 30.735006] ata1.00: configured for UDMA/100
[ 31.045757] ata2: SATA link down (SStatus 0 SControl 310)
[ 31.045858] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 31.047885] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 31.048039] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 31.048193] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 31.048220] ohci_hcd 0000:00:13.0: irq 19, io mem 0xb0005000
[ 31.056555] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 31.056568] sd 0:0:0:0: [sda] Write Protect is off
[ 31.056570] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.056583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.056644] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 31.056652] sd 0:0:0:0: [sda] Write Protect is off
[ 31.056654] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 31.056666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 31.056671] sda:<6>usb usb1: configuration #1 chosen from 1 choice
[ 31.106620] hub 1-0:1.0: USB hub found
[ 31.106632] hub 1-0:1.0: 4 ports detected
[ 31.210689] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 31.210835] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 31.211122] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 31.211144] ohci_hcd 0000:00:13.1: irq 19, io mem 0xb0006000
[ 31.266614] usb usb2: configuration #1 chosen from 1 choice
[ 31.266789] hub 2-0:1.0: USB hub found
[ 31.266803] hub 2-0:1.0: 4 ports detected
[ 31.370515] tg3.c:v3.77 (May 31, 2007)
[ 31.370545] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 31.371302] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 31.371421] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 31.371490] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 31.371543] ehci_hcd 0000:00:13.2: irq 19, io mem 0xb0007000
[ 31.371555] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.371644] usb usb3: configuration #1 chosen from 1 choice
[ 31.371667] hub 3-0:1.0: USB hub found
[ 31.371674] hub 3-0:1.0: 8 ports detected
[ 31.456563] eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:36:a6:54:f8
[ 31.456571] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 31.456574] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 31.458719] sda1 < sda5 sda6<6>ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 31.492398] sda7 sda8<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[b0315000-b03157ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 31.541099] hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 31.541109] Uniform CD-ROM driver Revision: 3.20
[ 31.549210] sda9 >
[ 31.549356] sd 0:0:0:0: [sda] Attached SCSI disk
[ 31.552962] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 31.797174] usb 3-8: new high speed USB device using ehci_hcd and address 2
[ 31.877821] swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 31.877827] swsusp: Basic memory bitmaps created
[ 31.901295] swsusp: Basic memory bitmaps freed
[ 31.933919] kjournald starting. Commit interval 5 seconds
[ 31.933425] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.973835] usb 3-8: configuration #1 chosen from 1 choice
[ 40.416432] PM: Writing back config space on device 0000:06:04.0 at offset c (was ff7f0000, writing 0)
[ 40.416442] PM: Writing back config space on device 0000:06:04.0 at offset b (was 3ed173b, writing 10a1025)
[ 40.416464] PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 0, writing 4008)
[ 40.416471] PM: Writing back config space on device 0000:06:04.0 at offset 2 (was 2000000, writing 2000003)
[ 40.416479] PM: Writing back config space on device 0000:06:04.0 at offset 1 (was 2b00000, writing 2b00006)
[ 40.416486] PM: Writing back config space on device 0000:06:04.0 at offset 0 (was 3ed173b, writing 169c14e4)
[ 41.359992] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.368196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.571525] ath_hal: module license 'Proprietary' taints kernel.
[ 41.615008] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 41.994462] wlan: 0.8.4.2 (0.9.3.1)
[ 42.013692] Yenta: CardBus bridge found at 0000:06:09.0 [1025:010a]
[ 42.013719] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 42.013721] Yenta: Routing CardBus interrupts to PCI
[ 42.013728] Yenta TI: socket 0000:06:09.0, mfunc 0x01321b22, devctl 0x66
[ 42.054589] sdhci: Secure Digital Host Controller Interface driver
[ 42.054593] sdhci: Copyright(c) Pierre Ossman
[ 42.066996] input: PC Speaker as /class/input/input2
[ 42.124532] NET: Registered protocol family 17
[ 42.182385] Linux video capture interface: v2.00
[ 42.228716] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 42.251736] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 42.251742] Socket status: 30000006
[ 42.251746] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 42.251750] pcmcia: parent PCI bridge Memory window: 0xb0300000 - 0xb03fffff
[ 42.251753] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 42.252069] sdhci: SDHCI controller found at 0000:06:09.3 [104c:803c] (rev 0)
[ 42.252093] ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 20 (level, low) -> IRQ 20
[ 42.252346] mmc0: SDHCI at 0xb0315800 irq 20 DMA
[ 42.253528] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 42.260021] ACPI: PCI Interrupt 0000:06:09.2[A] -> GSI 20 (level, low) -> IRQ 20
[ 42.271967] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 42.274522] parport_pc 00:0c: reported by Plug and Play ACPI
[ 42.274710] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 42.283576] ath_pci: 0.9.4.5 (0.9.3.1)
[ 42.283627] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 42.283637] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 42.864372] ath_rate_sample: 1.2 (0.9.3.1)
[ 42.913515] irda_init()
[ 42.913533] NET: Registered protocol family 23
[ 42.926741] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 42.926749] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 42.926753] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 42.926761] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 42.926764] wifi0: mac 10.3 phy 6.1 radio 10.2
[ 42.926768] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 42.926770] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 42.926772] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 42.926774] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 42.926776] wifi0: Use hw queue 8 for CAB traffic
[ 42.926778] wifi0: Use hw queue 9 for beacons
[ 42.940672] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 42.974502] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 42.974537] nsc-ircc, chip->init
[ 42.974552] nsc-ircc, Found chip at base=0x02e
[ 42.974593] nsc-ircc, driver loaded (Dag Brattli)
[ 43.016462] wifi0: Atheros 5424/2424: mem=0xb0200000, irq=19
[ 43.016045] IrDA: Registered device irda0
[ 43.016114] nsc-ircc, Found dongle: Supports SIR Mode only
[ 43.016170] nsc-ircc, chip->init
[ 43.016184] nsc-ircc, Found chip at base=0x02e
[ 43.016227] nsc-ircc, driver loaded (Dag Brattli)
[ 43.016233] nsc_ircc_open(), can't get iobase of 0x2f8
[ 43.179418] usbcore: registered new interface driver gspca
[ 43.179424] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 43.273005] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 44.516687] fuse init (API version 7.8)
[ 44.544133] lp0: using parport0 (interrupt-driven).
[ 44.673265] Adding 4160792k swap on /dev/disk/by-uuid/52d812df-c79c-4977-bbaf-70c57045a98b. Priority:-1 extents:1 across:4160792k
[ 83.292066] NET: Registered protocol family 10
[ 83.292157] lo: Disabled Privacy Extensions
[ 83.292215] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 93.785220] ath0: no IPv6 routers present
[ 106.742745] EXT3 FS on sda8, internal journal
[ 107.199821] kjournald starting. Commit interval 5 seconds
[ 107.208382] EXT3 FS on sda7, internal journal
[ 107.208389] EXT3-fs: mounted filesystem with ordered data mode.
[ 107.315943] AppArmor: Unregistered secondary security module: capability
[ 111.191956] ACPI: Battery Slot [BAT1] (battery present)
[ 111.360851] ACPI: ACPI Dock Station Driver
[ 111.375215] input: Power Button (FF) as /class/input/input4
[ 111.375486] ACPI: Power Button (FF) [PWRF]
[ 111.376577] input: Power Button (CM) as /class/input/input5
[ 111.376836] ACPI: Power Button (CM) [PWRB]
[ 111.386442] input: Lid Switch as /class/input/input6
[ 111.386699] ACPI: Lid Switch [LID]
[ 111.390438] input: Sleep Button (CM) as /class/input/input7
[ 111.390698] ACPI: Sleep Button (CM) [SLPB]
[ 111.430562] ACPI: AC Adapter [ACAD] (off-line)
[ 111.490139] ACPI: \_SB_.PCI0.IDE_.PRID.PBAY: found ejectable bay
[ 111.490144] ACPI: \_SB_.PCI0.IDE_.PRID.PBAY: Adding notify handler
[ 111.490179] ACPI: Bay [\_SB_.PCI0.IDE_.PRID.PBAY] Added
[ 111.691498] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (version 2.00.00)
[ 111.691997] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
[ 111.692002] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14
[ 111.692005] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x16
[ 111.692008] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 115.705709] AppArmor: Registered secondary security module: capability.
[ 115.705715] Capability LSM initialized as secondary
[ 115.774160] [fglrx] Maximum main memory to use for locked dma buffers: 1886 MBytes.
[ 115.774184] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 115.805996] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 115.903388] Bluetooth: Core ver 2.11
[ 115.903528] NET: Registered protocol family 31
[ 115.903532] Bluetooth: HCI device and connection manager initialized
[ 115.903537] Bluetooth: HCI socket layer initialized
[ 115.925815] Bluetooth: L2CAP ver 2.8
[ 115.925820] Bluetooth: L2CAP socket layer initialized
[ 115.948426] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 116.133375] Bluetooth: RFCOMM socket layer initialized
[ 116.133602] Bluetooth: RFCOMM TTY layer initialized
[ 116.133605] Bluetooth: RFCOMM ver 1.8
[ 118.125642] [fglrx] total GART = 130023424
[ 118.125649] [fglrx] free GART = 114032640
[ 118.125652] [fglrx] max single GART = 114032640
[ 118.125655] [fglrx] total LFB = 268304384
[ 118.125658] [fglrx] free LFB = 244305920
[ 118.125660] [fglrx] max single LFB = 244305920
[ 118.125661] [fglrx] total Inv = 0
[ 118.125663] [fglrx] free Inv = 0
[ 118.125665] [fglrx] max single Inv = 0
[ 118.125666] [fglrx] total TIM = 0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Reporting result of pci=assign-busses to lkml
2007-08-11 3:11 Reporting result of pci=assign-busses to lkml Russ Dill
@ 2007-08-15 14:23 ` Mathis Ahrens
0 siblings, 0 replies; 2+ messages in thread
From: Mathis Ahrens @ 2007-08-15 14:23 UTC (permalink / raw)
To: Russ Dill; +Cc: linux-kernel
Hi Russ,
in case you are still wondering about this...
There is a good explanation of the original reasoning here:
http://lists.opensuse.org/opensuse-bugs/2007-02/msg00149.html
And there are plans to remove the message here
http://www.uwsg.iu.edu/hypermail/linux/kernel/0707.3/2879.html
I am still seeing the warning in 2.6.23-rc3, but it makes no difference
if I specify pci=assign-busses ... everything seems fine either way.
Cheers,
Mathis
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-08-15 14:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-11 3:11 Reporting result of pci=assign-busses to lkml Russ Dill
2007-08-15 14:23 ` Mathis Ahrens
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox