From: Patrick Geoffray <patrick@myri.com>
To: Felix Marti <felix@chelsio.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>,
David Miller <davem@davemloft.net>,
sean.hefty@intel.com, netdev@vger.kernel.org, rdreier@cisco.com,
general@lists.openfabrics.org, linux-kernel@vger.kernel.org,
jeff@garzik.org
Subject: Re: [ofa-general] Re: [PATCH RFC] RDMA/CMA: Allocate PS_TCPportsfrom the host TCP port space.
Date: Mon, 20 Aug 2007 16:33:56 -0400 [thread overview]
Message-ID: <46C9FAB4.5020609@myri.com> (raw)
In-Reply-To: <8A71B368A89016469F72CD08050AD334018E2115@maui.asicdesigners.com>
Felix Marti wrote:
> Yes, the app will take the cache hits when accessing the data. However,
> the fact remains that if there is a copy in the receive path, you
> require and additional 3x memory BW (which is very significant at these
> high rates and most likely the bottleneck for most current systems)...
> and somebody always has to take the cache miss be it the copy_to_user or
> the app.
The cache miss is going to cost you half the memory bandwidth of a full
copy. If the data is already in cache, then the copy is cheaper.
However, removing the copy removes the kernel from the picture on the
receive side, so you lose demultiplexing, asynchronism, security,
accounting, flow-control, swapping, etc. If it's ok with you to not use
the kernel stack, then why expect to fit in the existing infrastructure
anyway ?
> Yes, RDMA support is there... but we could make it better and easier to
What do you need from the kernel for RDMA support beyond HW drivers ? A
fast way to pin and translate user memory (ie registration). That is
pretty much the sandbox that David referred to.
Eventually, it would be useful to be able to track the VM space to
implement a registration cache instead of using ugly hacks in user-space
to hijack malloc, but this is completely independent from the net stack.
> use. We have a problem today with port sharing and there was a proposal
The port spaces are either totally separate and there is no issue, or
completely identical and you should then run your connection manager in
user-space or fix your middlewares.
> and not for technical reasons. I believe this email threads shows in
> detail how RDMA (a network technology) is treated as bastard child by
> the network folks, well at least by one of them.
I don't think it's fair. This thread actually show how pushy some RDMA
folks are about not acknowledging that the current infrastructure is
here for a reason, and about mistaking zero-copy and RDMA.
This is a similar argument than the TOE discussion, and it was
definitively a good decision to not mess up the Linux stack with TOEs.
Patrick
next prev parent reply other threads:[~2007-08-20 21:29 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-07 14:37 [PATCH RFC] RDMA/CMA: Allocate PS_TCP ports from the host TCP port space Steve Wise
2007-08-07 14:54 ` Evgeniy Polyakov
2007-08-07 15:06 ` Steve Wise
2007-08-07 15:39 ` Evgeniy Polyakov
2007-08-09 18:49 ` Steve Wise
2007-08-09 21:40 ` [ofa-general] " Sean Hefty
2007-08-09 21:55 ` David Miller
2007-08-09 23:22 ` Sean Hefty
2007-08-15 14:42 ` Steve Wise
2007-08-16 2:26 ` Jeff Garzik
2007-08-16 3:11 ` Roland Dreier
2007-08-16 3:27 ` [ofa-general] Re: [PATCH RFC] RDMA/CMA: Allocate PS_TCP portsfrom " Sean Hefty
2007-08-16 13:43 ` [ofa-general] Re: [PATCH RFC] RDMA/CMA: Allocate PS_TCP ports from " Tom Tucker
2007-08-16 21:17 ` David Miller
2007-08-17 19:52 ` Roland Dreier
2007-08-17 21:27 ` David Miller
2007-08-17 23:31 ` Roland Dreier
2007-08-18 0:00 ` David Miller
2007-08-18 5:23 ` Roland Dreier
2007-08-18 6:44 ` David Miller
2007-08-19 7:01 ` [ofa-general] Re: [PATCH RFC] RDMA/CMA: Allocate PS_TCP portsfrom " Sean Hefty
2007-08-19 7:23 ` David Miller
2007-08-19 17:33 ` [ofa-general] Re: [PATCH RFC] RDMA/CMA: Allocate PS_TCPportsfrom " Felix Marti
2007-08-19 19:32 ` David Miller
2007-08-19 19:49 ` Felix Marti
2007-08-19 23:04 ` David Miller
2007-08-20 0:32 ` Felix Marti
2007-08-20 0:40 ` David Miller
2007-08-20 0:47 ` Felix Marti
2007-08-20 1:05 ` David Miller
2007-08-20 1:41 ` Felix Marti
2007-08-20 11:07 ` Andi Kleen
2007-08-20 16:26 ` Felix Marti
2007-08-20 19:16 ` Rick Jones
2007-08-20 9:43 ` Evgeniy Polyakov
2007-08-20 16:53 ` Felix Marti
2007-08-20 18:10 ` Andi Kleen
2007-08-20 19:02 ` Felix Marti
2007-08-20 20:18 ` Thomas Graf
2007-08-20 20:33 ` Andi Kleen
2007-08-20 20:33 ` Patrick Geoffray [this message]
2007-08-21 4:21 ` Felix Marti
2007-08-19 23:27 ` Andi Kleen
2007-08-19 23:12 ` David Miller
2007-08-20 1:45 ` Felix Marti
2007-08-20 0:18 ` Herbert Xu
2007-08-21 1:16 ` [ofa-general] Re: [PATCH RFC] RDMA/CMA: Allocate PS_TCP ports from " Roland Dreier
2007-08-21 6:58 ` David Miller
2007-08-28 19:38 ` Roland Dreier
2007-08-28 20:43 ` David Miller
2007-10-08 21:54 ` Steve Wise
2007-10-09 13:44 ` James Lentini
2007-10-10 21:01 ` Sean Hefty
2007-10-10 23:04 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46C9FAB4.5020609@myri.com \
--to=patrick@myri.com \
--cc=davem@davemloft.net \
--cc=felix@chelsio.com \
--cc=general@lists.openfabrics.org \
--cc=jeff@garzik.org \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rdreier@cisco.com \
--cc=sean.hefty@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox