From: Tilman Schmidt <tilman@imap.cc>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
john stultz <johnstul@us.ibm.com>, Andi Kleen <ak@suse.de>,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, Dave Jones <davej@codemonkey.org.uk>,
Thomas Renninger <trenn@suse.de>,
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Subject: Re: 2.6.23-rc3-mm1
Date: Sat, 25 Aug 2007 02:47:59 +0200 [thread overview]
Message-ID: <46CF7C3F.10707@imap.cc> (raw)
In-Reply-To: <20070824170702.a2c51084.akpm@linux-foundation.org>
[-- Attachment #1.1: Type: text/plain, Size: 2248 bytes --]
Am 25.08.2007 02:07 schrieb Andrew Morton:
> On Sat, 25 Aug 2007 01:27:25 +0200
> Tilman Schmidt <tilman@imap.cc> wrote:
>
>> Am 22.08.2007 11:06 schrieb Andrew Morton:
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23-rc3/2.6.23-rc3-mm1/
>> After applying Matthew Wilcox' patch to include/linux/isa.h
>
> which patch is that?
The one allowing drivers/scsi/advansys.c to compile with CONFIG_ISA=n:
Date: Wed, 22 Aug 2007 10:28:02 -0600
From: Matthew Wilcox <matthew@wil.cx>
Subject: Re: drivers/scsi/advansys.c - ld error ( Re: 2.6.23-rc3-mm1 )
Message-ID: <20070822162802.GJ9163@parisc-linux.org>
When CONFIG_ISA is disabled, the isa_driver support will not be compiled
in. Define stubs so that we don't get link-time errors.
>> this compiles
>> and boots on my Intel/openSUSE 10.2 test machine but throws out the
>> following messages I don't remember ever seeing with other kernels:
>>
>> - on console early during boot, also in SuSE's /var/log/boot.msg:
>>
>> your system time is not correct:
>> Wed Jul 13 13:15:31 UTC 1910
>> setting system time to:
>> Tue Jul 24 00:00:00 UTC 2007
>
> What architecture?
i386. The machine is a Pentium D 940 which would be x86_64 capable,
but I'm still running 32 bit kernels on it.
> if x86_64 then perhaps something went wrong with the old x86_64 dynticks
> leftovers which were in rc3-mm1. I've just merged a shiny fresh new series
> so perhaps things there got fixed. Please retest next -mm.
Will do that anyway.
> Perhaps it would be helpful if you could do a
>
> diff -u dmesg-2.6.23-rc3 dmesg-2.6.26-rc3-mm1
I hope the attached helps. I created it by taking /var/log/boot.msg
of the two systems, removing everything after "Kernel logging stopped",
editing out the printk timestamps and then running diff -u on them,
so it should be more or less the dmesg diff. I did not edit out any
of the differences because I'm lazy. (And also because I wasn't so sure
what would or wouldn't be interesting for you.)
--
Tilman Schmidt E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
[-- Attachment #1.2: bootmsg.diff --]
[-- Type: text/plain, Size: 25448 bytes --]
--- /tmp/bootmsg-2.6.23-rc3 2007-08-25 02:25:54.000000000 +0200
+++ /tmp/bootmsg-2.6.23-rc3-mm1 2007-08-25 02:26:08.000000000 +0200
@@ -1,10 +1,10 @@
-Inspecting /boot/System.map-2.6.23-rc3-testing
-Loaded 27522 symbols from /boot/System.map-2.6.23-rc3-testing.
+Inspecting /boot/System.map-2.6.23-rc3-mm1-testing
+Loaded 28663 symbols from /boot/System.map-2.6.23-rc3-mm1-testing.
Symbols match kernel version 2.6.23.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
-<5>Linux version 2.6.23-rc3-testing (ts@xenon) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP PREEMPT Tue Aug 14 15:27:26 CEST 2007
+<5>Linux version 2.6.23-rc3-mm1-testing (ts@xenon) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP PREEMPT Thu Aug 23 00:02:51 CEST 2007
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
<4> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
@@ -25,6 +25,7 @@
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000fe200
<7>Entering add_active_range(0, 0, 255744) 0 entries of 256 used
+<7>sizeof(struct page) = 56
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 229376
@@ -33,6 +34,7 @@
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 255744
<7>On node 0 totalpages: 255744
+<7>Node 0 memmap at 0xc1000000 size 14336000 first pfn 0xc1000000
<7> DMA zone: 56 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4040 pages, LIFO batch:0
@@ -82,16 +84,16 @@
<4>swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
<4>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
<4>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
-<4>Built 1 zonelists in Zone order. Total pages: 252248
+<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252248
<5>Kernel command line: root=/dev/system/root video=matroxfb:vesa:0x31b resume=/dev/system/swap splash=verbose
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
-<4>CPU 0 irqstacks, hard=c0451000 soft=c0449000
+<4>CPU 0 irqstacks, hard=c04d0000 soft=c04c8000
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
-<4>Detected 3197.068 MHz processor.
+<4>Detected 3196.982 MHz processor.
<4>Console: colour VGA+ 80x25
<6>console [tty0] enabled
<4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
@@ -188,21 +190,21 @@
<4>---------------------------------
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-<6>Memory: 993044k/1022976k available (2040k kernel code, 28100k reserved, 1042k data, 252k init, 104484k highmem)
+<6>Memory: 992396k/1022976k available (2110k kernel code, 28776k reserved, 1467k data, 260k init, 104484k highmem)
<4>virtual kernel memory layout:
<4> fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
<4> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<4> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
<4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
-<4> .init : 0xc0407000 - 0xc0446000 ( 252 kB)
-<4> .data : 0xc02fe179 - 0xc0402ce4 (1042 kB)
-<4> .text : 0xc0100000 - 0xc02fe179 (2040 kB)
+<4> .init : 0xc0483000 - 0xc04c4000 ( 260 kB)
+<4> .data : 0xc030f81f - 0xc047e4c4 (1467 kB)
+<4> .text : 0xc0100000 - 0xc030f81f (2110 kB)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
-<6>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
-<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
-<6>hpet0: 3 64-bit timers, 14318180 Hz
-<4>Calibrating delay using timer specific routine.. 6399.65 BogoMIPS (lpj=3199825)
-<6>Security Framework v1.0.0 initialized
+<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=16, CPUs=2, Nodes=1
+<4>Calibrating delay using timer specific routine.. 6399.03 BogoMIPS (lpj=3199517)
+<6>kswapd reclaim order set to 3
+<6>Security Framework initialized
+<6>Capability LSM initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 00000000
<4>monitor/mwait feature present.
@@ -223,9 +225,9 @@
<4>CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
<4>lockdep: not fixing up alternatives.
<4>Booting processor 1/1 eip 3000
-<4>CPU 1 irqstacks, hard=c0452000 soft=c044a000
+<4>CPU 1 irqstacks, hard=c04d1000 soft=c04c9000
<6>Initializing CPU#1
-<4>Calibrating delay using timer specific routine.. 6393.68 BogoMIPS (lpj=3196844)
+<4>Calibrating delay using timer specific routine.. 6392.76 BogoMIPS (lpj=3196383)
<7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 00000000
<4>monitor/mwait feature present.
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
@@ -238,23 +240,27 @@
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
<6>CPU1: Thermal monitoring enabled
<4>CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
-<6>Total of 2 processors activated (12793.33 BogoMIPS).
+<6>Total of 2 processors activated (12791.80 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
-<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
+<6>checking TSC synchronization [CPU#0 -> CPU#1]:
+<4>Measured 32 cycles TSC warp between CPUs, turning off TSC clock.
+<4>Marking TSC unstable due to: check_tsc_sync_source failed.
<6>Brought up 2 CPUs
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
-<3>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
-<3>PCI: Not using MMCONFIG.
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<7>ACPI: EC: Look up EC in DSDT
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3)
<6>ACPI: Using IOAPIC for interrupt routing
+<5>PCI: MCFG configuration 0: base 4026531840 segment 0 buses 0 - 127
+<5>PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
+<6>PCI: Using MMCONFIG
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
+<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<4>PCI quirk: region 0500-053f claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
@@ -285,7 +291,9 @@
<6>NetLabel: protocols = UNLABELED CIPSOv4
<6>NetLabel: unlabeled traffic allowed by default
<4>ACPI: RTC can wake from S4
-<6>Time: tsc clocksource has been installed.
+<6>Time: hpet clocksource has been installed.
+<6>Switched to high resolution mode on CPU 0
+<6>Switched to high resolution mode on CPU 1
<6>pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
<6>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
<6>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
@@ -340,15 +348,11 @@
<6>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
<6>TCP: Hash tables configured (established 65536 bind 65536)
<6>TCP reno registered
-<6>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
-<6>Switched to high resolution mode on CPU 0
-<4> it is
-<6>Freeing initrd memory: 7369k freed
+<6>checking if image is initramfs... it is
+<6>Freeing initrd memory: 7423k freed
<6>Machine check exception polling timer started.
-<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
-<5>apm: disabled - APM is not SMP safe.
<6>audit: initializing netlink socket (disabled)
-<5>audit(1187997798.852:1): initialized
+<5>audit(2418234223.871:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
@@ -363,22 +367,27 @@
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>Allocate Port Service[0000:00:1c.0:pcie02]
+<7>Allocate Port Service[0000:00:1c.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<7>Allocate Port Service[0000:00:1c.1:pcie02]
+<7>Allocate Port Service[0000:00:1c.1:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.2:pcie00]
<7>Allocate Port Service[0000:00:1c.2:pcie02]
+<7>Allocate Port Service[0000:00:1c.2:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.3:pcie00]
<7>Allocate Port Service[0000:00:1c.3:pcie02]
+<7>Allocate Port Service[0000:00:1c.3:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.4:pcie00]
<7>Allocate Port Service[0000:00:1c.4:pcie02]
+<7>Allocate Port Service[0000:00:1c.4:pcie03]
<6>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
<6>matroxfb: Matrox G550 detected
<6>PInS memtype = 5
@@ -390,7 +399,7 @@
<4>fb0: MATROX frame buffer device
<6>matroxfb_crtc2: secondary head of fb0 was registered as fb1
<6>Real Time Clock Driver v1.12ac
-<7>hpet_resources: 0xfed00000 is busy
+<4>hpet_acpi_add: no address or irqs in _CRS
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
@@ -407,18 +416,15 @@
<4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
-<6>input: AT Translated Set 2 keyboard as /class/input/input0
-<6>input: PC Speaker as /class/input/input1
+<6>input: PC Speaker as /class/input/input0
<6>NET: Registered protocol family 1
<6>Starting balanced_irq
<4>Using IPI No-Shortcut mode
-<6>Freeing unused kernel memory: 252k freed
-<4>Write protecting the kernel read-only data: 814k
+<6>Freeing unused kernel memory: 260k freed
+<4>Write protecting the kernel read-only data: 1215k
+<6>input: AT Translated Set 2 keyboard as /class/input/input1
<5>SCSI subsystem initialized
-<6>ACPI: Processor [CPU0] (supports 8 throttling states)
-<6>ACPI: Processor [CPU1] (supports 8 throttling states)
-<4>ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device is not present [20070126]
-<4>ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device is not present [20070126]
+<4>thermal: Unknown symbol acpi_processor_set_thermal_limit
<7>libata version 2.21 loaded.
<7>ahci 0000:00:1f.2: version 2.3
<6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
@@ -431,12 +437,12 @@
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
-<6>ata1: SATA max UDMA/133 cmd 0xf887c100 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata2: SATA max UDMA/133 cmd 0xf887c180 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata3: SATA max UDMA/133 cmd 0xf887c200 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata4: SATA max UDMA/133 cmd 0xf887c280 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata5: SATA max UDMA/133 cmd 0xf887c300 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata6: SATA max UDMA/133 cmd 0xf887c380 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata1: SATA max UDMA/133 cmd 0xf883c100 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata2: SATA max UDMA/133 cmd 0xf883c180 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata3: SATA max UDMA/133 cmd 0xf883c200 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata4: SATA max UDMA/133 cmd 0xf883c280 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata5: SATA max UDMA/133 cmd 0xf883c300 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata6: SATA max UDMA/133 cmd 0xf883c380 ctl 0x00000000 bmdma 0x00000000 irq 218
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata1.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
<6>ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
@@ -465,12 +471,12 @@
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-<6> sdb:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
-<4> sdb1
+<6> sdb: sdb1
<5>sd 1:0:0:0: [sdb] Attached SCSI disk
<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
<6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
@@ -517,94 +523,139 @@
<5>st 8:0:12:0: Attached scsi tape st0
<6>st 8:0:12:0: st0: try direct i/o: yes (alignment 512 B)
<6>Linux agpgart interface v0.102
+<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
+<4>rtc_cmos: probe of 00:03 failed with error -16
+<6>agpgart: suspend/resume problematic: resume with 3D/DRI active may lockup X.Org
+<4>on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c)
<6>agpgart: Detected an Intel 965Q Chipset.
<6>agpgart: Unknown page table size, assuming 512KB
<6>agpgart: Detected 7676K stolen memory.
<6>agpgart: AGP aperture is 256M @ 0x40000000
-<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
-<4>rtc_cmos: probe of 00:03 failed with error -16
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 22
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
-<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
-<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
-<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
-<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
-<5>firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
-<6>ehci_hcd 0000:00:1a.7: debug port 1
-<7>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
-<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x52c25c00
-<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
-<6>usb usb1: configuration #1 chosen from 1 choice
-<6>hub 1-0:1.0: USB hub found
-<6>hub 1-0:1.0: 4 ports detected
<6>USB Universal Host Controller Interface driver v3.0
-<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
-<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
-<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
-<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
-<6>ehci_hcd 0000:00:1d.7: debug port 1
-<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
-<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x52c25800
-<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
-<6>usb usb2: configuration #1 chosen from 1 choice
-<6>hub 2-0:1.0: USB hub found
-<6>hub 2-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
-<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
+<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030c0
-<6>usb usb3: configuration #1 chosen from 1 choice
-<6>hub 3-0:1.0: USB hub found
-<6>hub 3-0:1.0: 2 ports detected
+<6>usb usb1: configuration #1 chosen from 1 choice
+<6>hub 1-0:1.0: USB hub found
+<6>hub 1-0:1.0: 2 ports detected
+<5>firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
+<6>usb usb1: new device found, idVendor=0000, idProduct=0000
+<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb1: Product: UHCI Host Controller
+<6>usb usb1: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb1: SerialNumber: 0000:00:1a.0
<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
-<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
+<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1a.1: irq 22, io base 0x000030a0
-<6>usb usb4: configuration #1 chosen from 1 choice
-<6>hub 4-0:1.0: USB hub found
-<6>hub 4-0:1.0: 2 ports detected
-<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)
+<6>usb usb2: configuration #1 chosen from 1 choice
+<6>hub 2-0:1.0: USB hub found
+<6>hub 2-0:1.0: 2 ports detected
+<6>usb usb2: new device found, idVendor=0000, idProduct=0000
+<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb2: Product: UHCI Host Controller
+<6>usb usb2: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb2: SerialNumber: 0000:00:1a.1
+<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
+<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
+<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
+<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
+<6>ehci_hcd 0000:00:1a.7: debug port 1
+<7>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
+<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x52c25c00
+<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+<6>usb usb3: configuration #1 chosen from 1 choice
+<6>hub 3-0:1.0: USB hub found
+<6>hub 3-0:1.0: 4 ports detected
+<6>usb usb3: new device found, idVendor=0000, idProduct=0000
+<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb3: Product: EHCI Host Controller
+<6>usb usb3: Manufacturer: Linux 2.6.23-rc3-mm1-testing ehci_hcd
+<6>usb usb3: SerialNumber: 0000:00:1a.7
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
-<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
+<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
-<6>usb usb5: configuration #1 chosen from 1 choice
-<6>hub 5-0:1.0: USB hub found
-<6>hub 5-0:1.0: 2 ports detected
-<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
-<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
-<7>ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
-<7>ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
-<7>ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
-<7>ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0xe, fmic=0xb, line=0xf, fline=0x0, cd=0x0, aux=0x0
-<7>ALSA sound/pci/hda/patch_sigmatel.c:1297: dac_nids=3 (0x2/0x5/0x4/0x0/0x0)
+<6>usb usb4: configuration #1 chosen from 1 choice
+<6>hub 4-0:1.0: USB hub found
+<6>hub 4-0:1.0: 2 ports detected
+<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)
+<6>usb usb4: new device found, idVendor=0000, idProduct=0000
+<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb4: Product: UHCI Host Controller
+<6>usb usb4: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb4: SerialNumber: 0000:00:1d.0
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
-<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
+<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
-<6>usb usb6: configuration #1 chosen from 1 choice
-<6>hub 6-0:1.0: USB hub found
-<6>hub 6-0:1.0: 2 ports detected
+<6>usb usb5: configuration #1 chosen from 1 choice
+<6>hub 5-0:1.0: USB hub found
+<6>hub 5-0:1.0: 2 ports detected
+<6>usb usb5: new device found, idVendor=0000, idProduct=0000
+<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb5: Product: UHCI Host Controller
+<6>usb usb5: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb5: SerialNumber: 0000:00:1d.1
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
-<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
+<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
+<6>usb usb6: configuration #1 chosen from 1 choice
+<6>hub 6-0:1.0: USB hub found
+<6>hub 6-0:1.0: 2 ports detected
+<6>usb usb6: new device found, idVendor=0000, idProduct=0000
+<6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb6: Product: UHCI Host Controller
+<6>usb usb6: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb6: SerialNumber: 0000:00:1d.2
+<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
+<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
+<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
+<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
+<6>ehci_hcd 0000:00:1d.7: debug port 1
+<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
+<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x52c25800
+<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+<6>usb 5-2: new low speed USB device using uhci_hcd and address 2
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
-<6>hub 7-0:1.0: 2 ports detected
-<6>usb 6-2: new low speed USB device using uhci_hcd and address 2
-<6>usb 6-2: configuration #1 chosen from 1 choice
+<6>hub 7-0:1.0: 6 ports detected
+<6>usb usb7: new device found, idVendor=0000, idProduct=0000
+<6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb7: Product: EHCI Host Controller
+<6>usb usb7: Manufacturer: Linux 2.6.23-rc3-mm1-testing ehci_hcd
+<6>usb usb7: SerialNumber: 0000:00:1d.7
+<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
+<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
+<7>ALSA sound/pci/hda/hda_codec.c:2735: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
+<7>ALSA sound/pci/hda/hda_codec.c:2739: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
+<7>ALSA sound/pci/hda/hda_codec.c:2743: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
+<7>ALSA sound/pci/hda/hda_codec.c:2751: inputs: mic=0xe, fmic=0xb, line=0xf, fline=0x0, cd=0x0, aux=0x0
+<7>ALSA sound/pci/hda/patch_sigmatel.c:1344: dac_nids=3 (0x2/0x5/0x4/0x0/0x0)
<6>Adding 2097144k swap on /dev/system/swap. Priority:-1 extents:1 across:2097144k
-<6>usb 7-1: new full speed USB device using uhci_hcd and address 2
-<6>usb 7-1: configuration #1 chosen from 1 choice
+<6>usb 5-2: new low speed USB device using uhci_hcd and address 3
+<6>usb 5-2: configuration #1 chosen from 1 choice
+<6>usb 5-2: new device found, idVendor=413c, idProduct=3010
+<6>usb 5-2: new device strings: Mfr=0, Product=0, SerialNumber=0
+<6>usb 6-1: new full speed USB device using uhci_hcd and address 2
+<6>usb 6-1: configuration #1 chosen from 1 choice
+<6>usb 6-1: new device found, idVendor=0681, idProduct=0002
+<6>usb 6-1: new device strings: Mfr=1, Product=2, SerialNumber=3
+<6>usb 6-1: Product: Sinus 45 AB isdn
+<6>usb 6-1: Manufacturer: Siemens AG
+<6>usb 6-1: SerialNumber: 002F970BE0
<6>usbcore: registered new interface driver hiddev
<6>input: HID 413c:3010 as /class/input/input2
<6>input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.1-2
@@ -617,9 +668,10 @@
<7>gigaset: Register driver capabilities to LL
<7>bas_gigaset: gigaset_probe: Check if device matches .. (Vendor: 0x681, Product: 0x2)
<7>bas_gigaset: gigaset_probe: wrong alternate setting 0 - trying to switch
-<6>usb 7-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2)
+<6>usb 6-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2)
<7>bas_gigaset: -------> 0x34 (0)
<7>gigaset: scheduling START
+<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00])
<7>gigaset: connection state 0, event -110
<7>gigaset: unblocking all channels
<7>gigaset: blocking all channels
@@ -630,7 +682,6 @@
<7>gigaset: connection state 0, event -27
<6>usbcore: registered new interface driver bas_gigaset
<6>bas_gigaset: Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers
-<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00])
<6>bas_gigaset: USB Driver for Gigaset 307x
<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00])
<7>gigaset: scheduling timeout
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]
next prev parent reply other threads:[~2007-08-25 0:48 UTC|newest]
Thread overview: 207+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-22 9:06 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 10:11 ` [BUG] fs/xfs/xfs_bmap_btree.c:2312: error: 'b' undeclared (first use in this function) (Was Re: 2.6.23-rc3-mm1) Michal Piotrowski
2007-08-22 10:27 ` Michal Piotrowski
2007-08-23 5:27 ` Tim Shimmin
2007-08-22 13:02 ` [BUG] 2.6.23-rc3-mm1 - kernel BUG at net/core/skbuff.c:95! Kamalesh Babulal
2007-08-22 15:50 ` Andrew Morton
2007-08-22 17:58 ` Kay Sievers
2007-08-22 19:04 ` Balbir Singh
2007-08-22 20:55 ` Kay Sievers
2007-08-22 21:10 ` Balbir Singh
2007-08-23 18:59 ` Balbir Singh
2007-08-22 13:33 ` 2.6.23-rc3-mm1 Gabriel C
2007-08-22 16:09 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 17:01 ` 2.6.23-rc3-mm1 Gabriel C
2007-08-27 21:27 ` [-mm patch] make types.h usable for non-gcc C parsers Adrian Bunk
2007-08-27 21:34 ` Mike Frysinger
2007-08-27 21:36 ` Adrian Bunk
2007-08-27 21:42 ` Mike Frysinger
2007-08-28 7:37 ` Andrew Morton
2007-08-28 8:43 ` Sam Ravnborg
2007-08-28 14:19 ` Michael Matz
2007-08-28 14:40 ` Randy Dunlap
2007-08-28 14:42 ` Adrian Bunk
2007-08-28 17:06 ` Sam Ravnborg
2007-08-28 17:42 ` Mike Frysinger
2007-08-28 17:59 ` Adrian Bunk
2007-08-28 18:37 ` Sam Ravnborg
2007-08-22 14:19 ` 2.6.23-rc3-mm1 Michal Piotrowski
2007-08-22 16:17 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 15:30 ` net/ipv4/fib_trie.c - compile error (Re: 2.6.23-rc3-mm1) Gabriel C
2007-08-22 15:41 ` Adrian Bunk
2007-08-22 16:32 ` Gabriel C
2007-08-22 17:03 ` Paul E. McKenney
2007-08-27 6:36 ` Jarek Poplawski
2007-08-27 16:23 ` Paul E. McKenney
2007-08-22 16:15 ` drivers/scsi/advansys.c - ld error ( Re: 2.6.23-rc3-mm1 ) Gabriel C
2007-08-22 16:28 ` Matthew Wilcox
2007-08-22 16:57 ` Gabriel C
2007-08-22 16:33 ` 2.6.23-rc3-mm1: fix b43 compilation Rafael J. Wysocki
2007-08-22 21:56 ` Michael Buesch
2007-08-23 2:56 ` John W. Linville
2007-08-23 7:07 ` Andrew Morton
2007-08-22 17:10 ` drivers/net/ppp_generic - __modpost error ( Re: 2.6.23-rc3-mm1 ) Gabriel C
2007-08-22 17:17 ` 2.6.23-rc3-mm1 Mel Gorman
2007-08-22 18:10 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-23 11:39 ` 2.6.23-rc3-mm1 Mel Gorman
2007-08-23 12:03 ` 2.6.23-rc3-mm1 Andy Whitcroft
2007-08-23 12:22 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-23 12:34 ` 2.6.23-rc3-mm1 Andy Whitcroft
2007-08-23 12:28 ` 2.6.23-rc3-mm1 Sam Ravnborg
2007-08-23 14:24 ` 2.6.23-rc3-mm1 Sam Ravnborg
2007-08-23 12:07 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-23 16:25 ` 2.6.23-rc3-mm1 Mel Gorman
2007-08-22 17:24 ` 2.6.23-rc3-mm1 Torsten Kaiser
2007-08-22 18:14 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 17:26 ` 2.6.23-rc3-mm1: locking boot-time self-test failure Mariusz Kozlowski
2007-08-22 21:27 ` Frederik Deweerdt
2007-08-22 17:30 ` 2.6.23-rc3-mm1: WARNING: during resume from suspend on x86_64 Rafael J. Wysocki
2007-08-22 18:03 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 18:32 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 19:38 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-22 19:17 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 20:53 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-22 20:03 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 21:14 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-22 20:37 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 19:04 ` 2.6.23-rc3-mm1: kgdb build failure on powerpc Mariusz Kozlowski
2007-08-22 19:47 ` Andrew Morton
2007-08-22 22:44 ` [Kgdb-bugreport] " Jason Wessel
2007-08-22 23:53 ` Andrew Morton
2007-08-23 3:25 ` Jason Wessel
2007-08-29 23:43 ` Pete/Piet Delaney
2007-08-30 0:05 ` Pete/Piet Delaney
2007-08-30 1:19 ` Pete/Piet Delaney
2007-08-30 1:38 ` Randy Dunlap
2007-08-30 2:07 ` Jason Wessel
2007-08-30 2:13 ` Jason Wessel
2007-08-22 19:16 ` 2.6.23-rc3-mm1: net/wireless/rt2x00mac.c build failure Mariusz Kozlowski
2007-08-22 19:31 ` Ivo van Doorn
2007-08-22 19:54 ` Mariusz Kozlowski
2007-08-22 20:12 ` Ivo van Doorn
2007-08-22 20:22 ` Rafael J. Wysocki
2007-08-22 19:58 ` John W. Linville
2007-08-22 20:23 ` 2.6.23-rc3-mm1: inlining failures in sound/pci/hda/hda_codec.c Mariusz Kozlowski
2007-08-22 21:07 ` Takashi Iwai
2007-08-22 21:18 ` Mariusz Kozlowski
2007-08-22 21:44 ` Adrian Bunk
2007-08-22 20:25 ` [-mm patch] enforce noreplace-smp in alternative_instructions() Frederik Deweerdt
2007-08-23 21:50 ` Andrew Morton
2007-08-24 6:04 ` Frederik Deweerdt
2007-08-24 6:46 ` Jeremy Fitzhardinge
2007-08-24 8:22 ` Frederik Deweerdt
2007-08-25 12:07 ` Rusty Russell
2007-08-25 12:23 ` Frederik Deweerdt
2007-08-25 21:14 ` Frederik Deweerdt
2007-08-27 16:09 ` [PATCH] Fix lguest page-pinning logic ("lguest: bad stack page 0xc057a000") Rusty Russell
2007-08-30 16:38 ` Frederik Deweerdt
2007-08-30 22:12 ` Rusty Russell
2007-08-30 22:14 ` [PATCH] Fix out-by-one error in traps.c Rusty Russell
2007-08-31 4:44 ` Linus Torvalds
2007-08-31 6:03 ` Rusty Russell
2007-08-31 7:51 ` Linus Torvalds
2007-08-31 17:37 ` Rusty Russell
2007-08-31 18:24 ` Linus Torvalds
2007-09-04 18:18 ` Rusty Russell
2007-08-23 23:16 ` [-mm patch] enforce noreplace-smp in alternative_instructions() Jeremy Fitzhardinge
2007-08-24 6:06 ` Frederik Deweerdt
2007-08-22 23:30 ` drivers/char/nozomi.c - compile error ( Re: 2.6.23-rc3-mm1 ) Gabriel C
2007-08-23 3:45 ` Randy Dunlap
2007-08-22 23:34 ` fs/xfs/xfs_bmap_btree.c - compile error (Re: 2.6.23-rc3-mm1) Gabriel C
2007-08-23 3:47 ` Randy Dunlap
2007-08-23 2:08 ` 2.6.23-rc3-mm1 - memory layout change? - lost support for MAP_32BIT? - mono crashes Zan Lynx
2007-08-23 6:57 ` Andrew Morton
2007-08-23 9:28 ` Jiri Kosina
2007-08-23 17:32 ` Zan Lynx
2007-08-23 23:52 ` Andrew Morton
2007-08-24 0:09 ` Jiri Kosina
2007-08-24 16:17 ` Arjan van de Ven
2007-08-23 11:24 ` x86_64-dynticks-disable-hpet_id_legsup-hpets.patch hangs the system Gautham R Shenoy
2007-08-23 20:47 ` Andrew Morton
2007-08-23 20:56 ` Thomas Gleixner
2007-08-23 13:33 ` 2.6.23-rc3-mm1 - irda goes belly up Valdis.Kletnieks
2007-08-23 17:37 ` Alexey Dobriyan
2007-08-23 18:45 ` Valdis.Kletnieks
2007-08-23 21:16 ` Andrew Morton
2007-08-24 3:11 ` Eric W. Biederman
2007-08-24 3:46 ` Eric W. Biederman
2007-08-24 3:53 ` [PATCH 1/2] sysctl: Properly register the irda binary sysctl numbers Eric W. Biederman
2007-08-24 3:55 ` [PATCH 2/2] sysctl: For irda update sysctl_checks list of binary paths Eric W. Biederman
2007-08-26 22:03 ` Samuel Ortiz
2007-08-25 8:29 ` [PATCH 1/2] sysctl: Properly register the irda binary sysctl numbers Valdis.Kletnieks
2007-08-25 12:57 ` Eric W. Biederman
2007-08-25 14:07 ` Valdis.Kletnieks
2007-08-25 17:59 ` Eric W. Biederman
2007-08-28 18:40 ` Valdis.Kletnieks
2007-08-28 21:06 ` Eric W. Biederman
2007-08-25 18:03 ` [PATCH] sysctl: Update sysctl_check to handle compiled out code Eric W. Biederman
2007-08-28 18:44 ` Valdis.Kletnieks
2007-08-26 22:02 ` [PATCH 1/2] sysctl: Properly register the irda binary sysctl numbers Samuel Ortiz
2007-08-24 23:27 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 0:07 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-25 0:13 ` 2.6.23-rc3-mm1 Pallipadi, Venkatesh
2007-08-25 0:38 ` 2.6.23-rc3-mm1 Pallipadi, Venkatesh
2007-08-25 23:26 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 23:57 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-27 13:35 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 0:14 ` 2.6.23-rc3-mm1 Dave Jones
2007-08-25 0:21 ` 2.6.23-rc3-mm1 john stultz
2007-08-25 22:39 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 0:47 ` Tilman Schmidt [this message]
2007-08-25 3:30 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-25 4:28 ` 2.6.23-rc3-mm1 Dave Jones
2007-08-25 7:55 ` 2.6.23-rc3-mm1 Paul Rolland
2007-08-25 23:37 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-09-05 20:41 ` Clock trouble retest results with 2.6.23-rc4-mm1 (was: 2.6.23-rc3-mm1) Tilman Schmidt
2007-08-26 13:04 ` X freezes kernel during exit [Re: 2.6.23-rc3-mm1] Jiri Slaby
2007-08-28 11:41 ` Jiri Slaby
2007-09-09 11:44 ` Jiri Slaby
2007-09-09 12:47 ` Andrew Morton
2007-09-09 13:04 ` Jiri Slaby
2007-09-09 14:08 ` Jiri Slaby
2007-09-09 14:17 ` Andi Kleen
2007-09-09 14:26 ` Jiri Slaby
2007-09-09 14:33 ` Andi Kleen
2007-09-09 14:35 ` Jiri Slaby
2007-09-09 14:43 ` Jiri Slaby
2007-09-09 15:01 ` Andi Kleen
2007-09-09 15:49 ` Jiri Slaby
2007-09-11 15:18 ` Dave Airlie
2007-09-17 11:09 ` Jiri Slaby
2007-08-27 21:27 ` [-mm patch] make "struct menu_governor" static (again) Adrian Bunk
2007-08-27 22:32 ` Adam Belay
2007-08-27 21:27 ` [-mm patch] remove parport_device_num() Adrian Bunk
2007-08-27 21:27 ` [-mm patch] make do_restart_poll() static Adrian Bunk
2007-08-27 21:27 ` [-mm patch] unexport snd_ctl_elem_{read,write} Adrian Bunk
2007-08-27 21:27 ` [-mm patch] unexport sys_{open,read} Adrian Bunk
2007-08-27 22:53 ` Arjan van de Ven
2007-08-27 23:17 ` Adrian Bunk
2007-08-27 21:27 ` 2.6.23-rc3-mm1: m32r defconfig compile error Adrian Bunk
2007-08-28 3:50 ` Hirokazu Takata
2007-08-27 21:27 ` [-mm patch] remove unwind exports Adrian Bunk
2007-08-27 21:28 ` [-mm patch] unexport noautodma Adrian Bunk
2007-08-27 21:28 ` [-mm patch] mousedev.c:mixdev_open_devices() bugfix Adrian Bunk
2007-08-27 21:29 ` [-mm patch] ivtv-fb.c bugfix Adrian Bunk
2007-08-28 6:30 ` [v4l-dvb-maintainer] " Hans Verkuil
2007-08-27 21:29 ` [-mm patch] iwl-base.c bugfixes Adrian Bunk
2007-08-27 22:34 ` Tomas Winkler
2007-08-27 21:29 ` 2.6.23-rc3-mm1: i386: -maccumulate-outgoing-args unconditionally Adrian Bunk
2007-08-28 11:32 ` oops at sr_block_release [Re: 2.6.23-rc3-mm1] Jiri Slaby
2007-08-28 15:08 ` Satyam Sharma
2007-08-28 15:21 ` Jiri Slaby
2007-08-29 2:58 ` Andrew Morton
2007-08-29 14:04 ` 2.6.23-rc3-mm1 Valdis.Kletnieks
2007-08-29 17:37 ` 2.6.23-rc3-mm1 - vdso and gettimeofday issues with glibc Valdis.Kletnieks
2007-08-29 23:15 ` Andrew Morton
2007-08-30 2:46 ` Ulrich Drepper
2007-08-30 14:08 ` Valdis.Kletnieks
2007-08-31 21:21 ` Chuck Ebbert
2007-08-30 16:27 ` Chuck Ebbert
2007-09-09 0:24 ` Valdis.Kletnieks
2007-09-09 7:27 ` Andi Kleen
2007-09-10 19:07 ` Valdis.Kletnieks
2007-08-30 16:30 ` Chuck Ebbert
2007-09-01 10:07 ` Andi Kleen
2007-09-07 19:39 ` Chuck Ebbert
2007-09-08 8:57 ` Andi Kleen
2007-09-09 3:20 ` Valdis.Kletnieks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46CF7C3F.10707@imap.cc \
--to=tilman@imap.cc \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=davej@codemonkey.org.uk \
--cc=johnstul@us.ibm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=trenn@suse.de \
--cc=venkatesh.pallipadi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).