From: Howard Chu <hyc@symas.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: 2.6.22.6 pata_via cable detect
Date: Mon, 03 Sep 2007 03:29:17 -0700 [thread overview]
Message-ID: <46DBE1FD.10409@symas.com> (raw)
Still have a slight glitch here. I have 2 hard drives on the primary channel,
detected correctly as 80-wire and UDMA100. I have a DVD burner on the secondary
channel, detected incorrectly as 40-wire. (It's sitting by itself on an 80-wire
cable.) This is on an Asus A8V-Deluxe.
Here's the dmesg output after a "modprobe pata_via"
pata_via 0000:00:0f.1: version 0.3.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
scsi5 : pata_via
scsi6 : pata_via
ata6: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x000000000001fc00 irq 14
ata7: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x000000000001fc08 irq 15
ata6.00: ATA-6: WDC WD2000JB-00DUA0, 70.13G70, max UDMA/100
ata6.00: 390721968 sectors, multi 16: LBA48
ata6.01: ATA-7: WDC WD5000AAKB-00UKA0, 07.01N01, max UDMA/100
ata6.01: 976773168 sectors, multi 16: LBA48
ata6.00: configured for UDMA/100
ata6.01: configured for UDMA/100
ata7.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL07, max UDMA/66
ata7.00: limited to UDMA/33 due to 40-wire cable
ata7.00: configured for UDMA/33
scsi 5:0:0:0: Direct-Access ATA WDC WD2000JB-00D 70.1 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 390721968 512-byte hardware sectors (200050 MB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 5:0:0:0: [sde] 390721968 512-byte hardware sectors (200050 MB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sde: sde1
sd 5:0:0:0: [sde] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:1:0: Direct-Access ATA WDC WD5000AAKB-0 07.0 PQ: 0 ANSI: 5
sd 5:0:1:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:1:0: [sdf] Write Protect is off
sd 5:0:1:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 5:0:1:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
sd 5:0:1:0: [sdf] Write Protect is off
sd 5:0:1:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdf: unknown partition table
sd 5:0:1:0: [sdf] Attached SCSI disk
sd 5:0:1:0: Attached scsi generic sg5 type 0
scsi 6:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1H LL07 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg6 type 5
Let me know what other info you need.
--
-- Howard Chu
Chief Architect, Symas Corp. http://www.symas.com
Director, Highland Sun http://highlandsun.com/hyc/
Chief Architect, OpenLDAP http://www.openldap.org/project/
next reply other threads:[~2007-09-03 11:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-03 10:29 Howard Chu [this message]
2007-09-08 16:46 ` 2.6.22.6 pata_via cable detect Bill Davidsen
2007-09-08 16:55 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46DBE1FD.10409@symas.com \
--to=hyc@symas.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox