Re: PCI: Unable to reserve mem region problem

Re: PCI: Unable to reserve mem region problem

[Robert Hancock]

Chuck Ebbert wrote:
> On 09/05/2007 08:31 PM, Alan Cox wrote:
>> On Wed, 05 Sep 2007 10:32:38 -0400
>> "Karl Bellve" <Karl.Bellve@umassmed.edu> wrote:
>>
>>> Please CC any response. Thanks.
>>>
>>> I am having an issue with a Supermicro h8dce motherboard and failure to 
>>> recognize a 5th SATA drive after upgrading to Fedora 7.
>> Can you send me an lspci -vvxxx so that I can look into this. Might be a
>> few days with the kernel summit but it should give a clue and may be
>> linked to ADMA mode
> 
> It's in RH bugzilla:
> 
> https://bugzilla.redhat.com/show_bug.cgi?id=280641

The last BAR on the nForce4 ADMA controllers on this board are at 
0xdfefe000 and 0xdfefd000. But it looks like PnP ACPI is also reserving 
those memory ranges:

Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 
0xdfefd000-0xdfefd3ff has been reserved
Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 
0xdfefe000-0xdfefe3ff has been reserved

Which I very much doubt it should be doing, the BIOS doesn't need to 
reserve PCI BAR ranges in the ACPI tables. This sounds like a BIOS bug. 
You might want to check for an update from Supermicro.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

Re: PCI: Unable to reserve mem region problem

[Alan Cox]

> > https://bugzilla.redhat.com/show_bug.cgi?id=280641
> 
> The last BAR on the nForce4 ADMA controllers on this board are at 
> 0xdfefe000 and 0xdfefd000. But it looks like PnP ACPI is also reserving 
> those memory ranges:
> 
> Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 
> 0xdfefd000-0xdfefd3ff has been reserved
> Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 
> 0xdfefe000-0xdfefe3ff has been reserved
> 
> Which I very much doubt it should be doing, the BIOS doesn't need to 
> reserve PCI BAR ranges in the ACPI tables. This sounds like a BIOS bug. 
> You might want to check for an update from Supermicro.

They may be doing it to force the system out of ADMA mode. Right now we
just blow up in that case but it appears other-OS may fall back (which is
I suspect what we need to be doing)

PCI: Unable to reserve mem region problem

[Karl Bellve]

[-- Attachment #1: Type: text/plain, Size: 1381 bytes --]


Please CC any response. Thanks.

I am having an issue with a Supermicro h8dce motherboard and failure to 
recognize a 5th SATA drive after upgrading to Fedora 7.

This motherboard has 8 sata ports that use the sata_nv driver.

The lack of seeing the 5th SATA drive shows up in 2.6.22 kernels, such 
as kernel-2.6.22.2-42.fc6 and kernel-2.6.22.1-41.fc7.

The 5th SATA drive can still be detected in 2.6.20 kernels such as 
kernel-2.6.20-1.2933.fc6 (I am currently using this kernel).

 From dmesg, it appears the reason I am not seeing the 5th SATA drive 
(second SATA controller) is the following error:

Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:08.0: Using ADMA mode
Aug 30 14:08:03 alcor kernel: PCI: *Unable to reserve mem region* 
#6:1000@dfefd000 for device 0000:80:08.0
Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device 
0000:80:08.0 disabled
Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:08.0 failed with 
error -16

sata_nv that comes with the 2.6.22 kernels appear to be version 3.4 
while the older kernels comes with version 3.2 (which work). I contacted 
Robert Hancock directly about this and he suggested I post an email to LKML.

Motherboard: 
http://www.supermicro.com/Aplus/motherboard/Opteron/nForce/H8DCE.cfm
Single AMD Opteron(tm) Processor 244
1 GB of memory.

I can send you the complete dmesg output if you would like.

Thanks!




[-- Attachment #2: Karl.Bellve.vcf --]
[-- Type: text/plain, Size: 350 bytes --]

begin:vcard
fn:Karl Bellve
n:Bellve;Karl
org:Biomedical Imaging Group;Department of Physiology
adr:2 Biotech, Suite 114;;373 Plantation Street;Worcester;Massachusetts;01655;United States of America
email;internet:Karl.Bellve@umassmed.edu
title:Assistant Professor
tel;work:508-856-6514
tel;fax:508-856-6514
x-mozilla-html:TRUE
version:2.1
end:vcard

Re: PCI: Unable to reserve mem region problem

[Chuck Ebbert]

On 09/05/2007 10:32 AM, Karl Bellve wrote:
> 
> Please CC any response. Thanks.
> 
> I am having an issue with a Supermicro h8dce motherboard and failure to
> recognize a 5th SATA drive after upgrading to Fedora 7.
> 
> This motherboard has 8 sata ports that use the sata_nv driver.
> 
> The lack of seeing the 5th SATA drive shows up in 2.6.22 kernels, such
> as kernel-2.6.22.2-42.fc6 and kernel-2.6.22.1-41.fc7.
> 
> The 5th SATA drive can still be detected in 2.6.20 kernels such as
> kernel-2.6.20-1.2933.fc6 (I am currently using this kernel).
> 
> From dmesg, it appears the reason I am not seeing the 5th SATA drive
> (second SATA controller) is the following error:
> 
> Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:08.0: Using ADMA mode
> Aug 30 14:08:03 alcor kernel: PCI: *Unable to reserve mem region*
> #6:1000@dfefd000 for device 0000:80:08.0
> Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device
> 0000:80:08.0 disabled
> Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:08.0 failed with
> error -16
> 
> sata_nv that comes with the 2.6.22 kernels appear to be version 3.4
> while the older kernels comes with version 3.2 (which work). I contacted
> Robert Hancock directly about this and he suggested I post an email to
> LKML.
> 
> Motherboard:
> http://www.supermicro.com/Aplus/motherboard/Opteron/nForce/H8DCE.cfm
> Single AMD Opteron(tm) Processor 244
> 1 GB of memory.
> 
> I can send you the complete dmesg output if you would like.
> 

Open a bugzilla at https://bugzilla.redhat.com and post full dmesg from
the new and old kernels as attachments there.


There seems to be some kind of memory layout problem in 2.6.22...

Re: PCI: Unable to reserve mem region problem

[Alan Cox]

On Wed, 05 Sep 2007 10:32:38 -0400
"Karl Bellve" <Karl.Bellve@umassmed.edu> wrote:

> 
> Please CC any response. Thanks.
> 
> I am having an issue with a Supermicro h8dce motherboard and failure to 
> recognize a 5th SATA drive after upgrading to Fedora 7.

Can you send me an lspci -vvxxx so that I can look into this. Might be a
few days with the kernel summit but it should give a clue and may be
linked to ADMA mode

Re: PCI: Unable to reserve mem region problem

[Chuck Ebbert]

On 09/05/2007 08:31 PM, Alan Cox wrote:
> On Wed, 05 Sep 2007 10:32:38 -0400
> "Karl Bellve" <Karl.Bellve@umassmed.edu> wrote:
> 
>> Please CC any response. Thanks.
>>
>> I am having an issue with a Supermicro h8dce motherboard and failure to 
>> recognize a 5th SATA drive after upgrading to Fedora 7.
> 
> Can you send me an lspci -vvxxx so that I can look into this. Might be a
> few days with the kernel summit but it should give a clue and may be
> linked to ADMA mode

It's in RH bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=280641