[PATCH 2/3] cxacru: Reduce initialisation delay

[Simon Arlott <simon@fire.lp0.eu>]

Since card status updates appear to only occur every second, a delay
of 1000ms on startup may not be sufficient - change to 1500ms.

The long delay of 4000ms is likely to be related to the time required
for the ADSL line to come up - the driver should not need to do this.

Overall delay when loading firmware will change from 5000ms to 1500ms.

Signed-Off-By: Simon Arlott <simon@fire.lp0.eu>
---
 drivers/usb/atm/cxacru.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 8d8a107..35308a8 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -931,9 +931,10 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 		usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
 		return;
 	}
+	usb_info(usbatm, "started firmware\n");
 
 	/* Delay to allow firmware to start up. */
-	msleep_interruptible(1000);
+	msleep(1500);
 
 	usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD));
 	usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD));
@@ -947,7 +948,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 	}
 
 	/* Load config data (le32), doing one packet at a time */
-	if (cf)
+	if (cf) {
 		for (off = 0; off < cf->size / 4; ) {
 			u32 buf[CMD_PACKET_SIZE / 4 - 1];
 			int i, len = min_t(int, cf->size / 4 - off, CMD_PACKET_SIZE / 4 / 2 - 1);
@@ -963,8 +964,8 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 				return;
 			}
 		}
-
-	msleep_interruptible(4000);
+		usb_info(usbatm, "loaded config data\n");
+	}
 }
 
 static int cxacru_find_firmware(struct cxacru_data *instance,
-- 
1.5.0.1

-- 
Simon Arlott