public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Eric Dumazet <dada1@cosmosbay.com>
To: Denys <nuclearcat@nuclearcat.com>
Cc: David Miller <davem@davemloft.net>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: 2.6.21 -> 2.6.22 & 2.6.23-rc8 performance regression
Date: Mon, 01 Oct 2007 10:20:07 +0200	[thread overview]
Message-ID: <4700ADB7.7050102@cosmosbay.com> (raw)
In-Reply-To: <20071001080339.M21850@nuclearcat.com>

Denys a écrit :
> Well, i can play a bit more on "live" servers. I have now hot-swap server with
> full gentoo,  where i can rebuild any kernel you want, with any applied patch.
> But it looks more like not overhead, load becoming high too "spiky", and it is
> not just permantenly higher. Also it is not normal that all system becoming
> unresposive (for example ping 127.0.0.1 becoming 300ms for period, when usage
> softirq jumps to 100%).
>
>   
Could you try a pristine 2.6.22.9 and some patch in 
secure_tcp_sequence_number() like :

--- drivers/char/random.c.orig 2007-10-01 10:18:42.000000000 +0200
+++ drivers/char/random.c 2007-10-01 10:19:58.000000000 +0200
@@ -1554,7 +1554,7 @@
* That's funny, Linux has one built in! Use it!
* (Networks are faster now - should this be increased?)
*/
- seq += ktime_get_real().tv64;
+ seq += ktime_get_real().tv64 / 1000;
#if 0
printk("init_seq(%lx, %lx, %d, %d) = %d\n",
saddr, daddr, sport, dport, seq);

Thank you


> On Mon, 01 Oct 2007 00:12:59 -0700 (PDT), David Miller wrote
>   
>> From: Eric Dumazet <dada1@cosmosbay.com>
>> Date: Mon, 01 Oct 2007 07:59:12 +0200
>>
>>     
>>> No problem here on bigger servers, so I CC David Miller and netdev
>>> on this one.  AFAIK do_gettimeofday() and ktime_get_real() should
>>> use the same underlying hardware functions on PC and no performance
>>> problem should happen here.
>>>       
>> One thing that jumps out at me is that on 32-bit (and to a certain
>> extent on 64-bit) there is a lot of stack accesses and missed
>> optimizations because all of the work occurs, and gets expanded,
>> inside of ktime_get_real().
>>
>> The timespec_to_ktime() inside of there constructs the ktime_t return
>> value on the stack, then returns that as an aggregate to the caller.
>>
>> That cannot be without some cost.
>>
>> ktime_get_real() is definitely a candidate for inlining especially in
>> these kinds of cases where we'll happily get computations in local
>> registers instead of all of this on-stack nonsense.  And in several
>> cases (if the caller only needs the tv_sec value, for example)
>> computations can be elided entirely.
>>
>> It would be constructive to experiment and see if this is in fact 
>> part of the problem.
>>     
>
>
> --
> Denys Fedoryshchenko
> Technical Manager
> Virtual ISP S.A.L.
>
>
>   





  reply	other threads:[~2007-10-01  8:23 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-30 14:48 2.6.21 -> 2.6.22 & 2.6.23-rc8 performance regression Denys
2007-09-30 17:48 ` Eric Dumazet
2007-09-30  4:25   ` Nick Piggin
2007-09-30 22:04     ` Denys
2007-10-01 10:01       ` Andi Kleen
2007-10-01 10:30         ` Denys
2007-10-01 11:14           ` Andi Kleen
2007-10-01 11:52             ` Denys
2007-10-01 11:57               ` Andi Kleen
2007-10-01 12:04                 ` Denys
2007-09-30 22:35     ` Denys
2007-10-01  5:59       ` Eric Dumazet
2007-10-01  7:12         ` David Miller
2007-10-01  8:07           ` Denys
2007-10-01  8:20             ` Eric Dumazet [this message]
2007-10-01  8:35               ` Eric Dumazet
2007-10-01 12:10               ` Denys
2007-10-01 13:26               ` Denys
2007-10-01 20:10         ` Eric Dumazet
2007-10-01 20:57           ` David Miller
2007-09-30 23:24     ` Denys
2007-10-01  6:43     ` Denys
2007-09-30 18:45   ` Denys
  -- strict thread matches above, loose matches on Subject: below --
2007-09-30 15:22 Denys
2007-09-30 17:31 Denys

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4700ADB7.7050102@cosmosbay.com \
    --to=dada1@cosmosbay.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nuclearcat@nuclearcat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox