* Why the bond0 is set on kernel 2.6.22?
@ 2007-10-13 11:26 YH
0 siblings, 0 replies; only message in thread
From: YH @ 2007-10-13 11:26 UTC (permalink / raw)
To: Linux-Kernel Mailinglist
Hi,
I am using an ARM processor with CS8900 Ethernet card, it works fine in
kernel 2.6.11. But, recently I upgraded it to kernel 2.6.22, the
ipconfig.c started up a bond0 instead of eth0 with an IP address I
actually assigned to eth0 in cs89x0.c. The trouble was I cannot event
ping the ip address. Any advice why this was happend and how to fix it?
Thank you.
Jim
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-10-13 11:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-13 11:26 Why the bond0 is set on kernel 2.6.22? YH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox