public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Zach Brown <zach.brown@oracle.com>
To: Karl Schendel <kschendel@datallegro.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
	Benjamin LaHaise <bcrl@kvack.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Nick Piggin <nickpiggin@yahoo.com.au>,
	Chris Mason <chris.mason@oracle.com>
Subject: Re: [PATCH] Fix bad data from non-direct-io read after direct-io write
Date: Tue, 30 Oct 2007 11:45:46 -0700	[thread overview]
Message-ID: <47277BDA.6070702@oracle.com> (raw)
In-Reply-To: <47227813.7040604@datallegro.com>


> Yes, I do - I'd been tripping over it once every couple weeks,
> and I finally figured out how to hold my mouth right so that it
> fails (almost) every time.

OK, I tested and verified Karl's fix and wrote some commentary around it.
(Would a aio-dio git repo on kernel.org for these kind of fixes be well
received?)

----
dio: fix cache invalidation after sync writes

Commit commit 65b8291c4000e5f38fc94fb2ca0cb7e8683c8a1b ("dio: invalidate clean
pages before dio write") introduced a bug which stopped dio from ever
invalidating the page cache after writes.  It still invalidated it before
writes so most users were fine.

Karl Schendel reported hitting this bug ( http://lkml.org/lkml/2007/10/26/481 )
when he had a buffered reader immediately reading file data after an O_DIRECT
wirter had written the data.  The kernel issued read-ahead beyond the position
of the reader which overlapped with the O_DIRECT writer.  The failure to
invalidate after writes caused the reader to see stale data from the
read-ahead.

The following patch is originally from Karl.  The following commentary is his:

	The below 3rd try takes on your suggestion of just invalidating
	no matter what the retval from the direct_IO call.  I ran it
	thru the test-case several times and it has worked every time.
	The post-invalidate is probably still too early for async-directio,
	but I don't have a testcase for that;  just sync.  And, this
	won't be any worse in the async case.

I added a test to the aio-dio-regress repository which mimics Karl's IO
pattern.  It verifed the bad behaviour and that the patch fixed it.  I agree
with Karl, this still doesn't help the case where a buffered reader follows an
AIO O_DIRECT writer.  That will require a bit more work.

This gives up on the idea of returning EIO to indicate to userspace that stale
data remains if the invalidation failed.

Signed-off-by: Zach Brown <zach.brown@oracle.com>

--- linux-2.6.23.1-base/mm/filemap.c	2007-10-12 12:43:44.000000000 -0400
+++ linux-2.6.23.1/mm/filemap.c	2007-10-26 19:21:20.000000000 -0400
@@ -2194,21 +2194,17 @@ generic_file_direct_IO(int rw, struct ki
 	}

 	retval = mapping->a_ops->direct_IO(rw, iocb, iov, offset, nr_segs);
-	if (retval)
-		goto out;

 	/*
 	 * Finally, try again to invalidate clean pages which might have been
-	 * faulted in by get_user_pages() if the source of the write was an
-	 * mmap()ed region of the file we're writing.  That's a pretty crazy
-	 * thing to do, so we don't support it 100%.  If this invalidation
-	 * fails and we have -EIOCBQUEUED we ignore the failure.
+	 * cached by non-direct readahead, or faulted in by get_user_pages()
+	 * if the source of the write was an mmap'ed region of the file
+	 * we're writing.  Either one is a pretty crazy thing to do,
+	 * so we don't support it 100%.  If this invalidation
+	 * fails, tough, the write still worked...
 	 */
 	if (rw == WRITE && mapping->nrpages) {
-		int err = invalidate_inode_pages2_range(mapping,
-					      offset >> PAGE_CACHE_SHIFT, end);
-		if (err && retval >= 0)
-			retval = err;
+		invalidate_inode_pages2_range(mapping, offset >> PAGE_CACHE_SHIFT, end);
 	}
 out:
 	return retval;


  reply	other threads:[~2007-10-30 18:45 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-26 21:12 [PATCH] Fix bad data from non-direct-io read after direct-io write Karl Schendel
2007-10-26 21:34 ` Linus Torvalds
2007-10-26 22:10   ` Karl Schendel
2007-10-26 22:30   ` Zach Brown
2007-10-26 22:41     ` Karl Schendel
2007-10-26 22:42     ` Linus Torvalds
2007-10-26 22:54       ` Zach Brown
2007-10-26 23:14         ` Linus Torvalds
2007-10-26 23:28           ` Karl Schendel
2007-10-30 18:45             ` Zach Brown [this message]
2007-10-30 19:11               ` Linus Torvalds
2007-10-26 23:38           ` Zach Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47277BDA.6070702@oracle.com \
    --to=zach.brown@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=bcrl@kvack.org \
    --cc=chris.mason@oracle.com \
    --cc=kschendel@datallegro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nickpiggin@yahoo.com.au \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox