From: Mark Lord <lkml@rtr.ca>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Jeff Garzik <jgarzik@pobox.com>,
Linus Torvalds <torvalds@osdl.org>
Subject: [PATCH] r8169 fix regression on ASUS motherboards (updated again)
Date: Thu, 08 Nov 2007 09:16:12 -0500 [thread overview]
Message-ID: <47331A2C.6050005@rtr.ca> (raw)
In-Reply-To: <20071108002112.GD15367@electric-eye.fr.zoreil.com>
Francois Romieu wrote:
>
> Ok, I have pushed the patch below for Jeff to pull at korg.
>
>>From 1dd7681bc2ff171341ea5cae957f8ecb5c0c102e Mon Sep 17 00:00:00 2001
> From: Mark Lord <mlord@pobox.com>
> Date: Thu, 8 Nov 2007 01:03:04 +0100
> Subject: [PATCH] r8169: revert 7da97ec96a0934319c7fbedd3d38baf533e20640 (partly)
>
> Various symptoms depending on the .config options:
> - the card stops working after some (short) time
> - the card does not work at all
> - the card disappears (nothing in lspci/dmesg)
>
> A real power-off is needed to recover the card.
>
> Signed-off-by: Mark Lord <mlord@pobox.com>
> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
> ---
> drivers/net/r8169.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
> index 9dbab3f..a37cf82 100644
> --- a/drivers/net/r8169.c
> +++ b/drivers/net/r8169.c
> @@ -1328,6 +1328,7 @@ static void rtl_hw_phy_config(struct net_device *dev)
> break;
> case RTL_GIGA_MAC_VER_11:
> case RTL_GIGA_MAC_VER_12:
> + break;
> case RTL_GIGA_MAC_VER_17:
> rtl8168b_hw_phy_config(ioaddr);
> break;
..
Stop the presses: Another person has now reported back to me.
This guy has the VER_17 chip inside a notebook, and the same problem.
So the unified fix for all of these is to just get rid of rtl8168b_hw_phy_config(),
as that code is all that is really different from 2.6.23 (where all is okay).
Updated patch below.
* * * * *
Fix r8169B regression on ASUS motherboards (and MSI, and..)
Third/final iteration.
This replaces the earlier versions of this patch.
This one fixes *all* versions of r6169 *B* variant,
restoring the init code back to what it was in 2.6.23.
The r8169 ethernet driver worked fine in 2.6.23, but fails
in 2.6.24-rc* for the onboard ethernet of some ASUS (MAC_VER_11)
and MSI (MAC_VER_12) motherboards, and also for some notebooks
(MAC_VER_17) that use this chip.
Various symptoms depending on the .config options:
- the card stops working after some (short) time
- the card does not work at all
- the card disappears (nothing in lspci/dmesg)
A real power-off is needed to recover the card.
This patch fixes it again.
Signed-off-by: Mark Lord <mlord@pobox.com>
--- linux-2.6.24-rc2/drivers/net/r8169.c 2007-11-06 22:56:24.000000000 -0500
+++ linux/drivers/net/r8169.c 2007-11-08 09:05:08.000000000 -0500
@@ -1247,13 +1247,6 @@
}
static void rtl8168b_hw_phy_config(void __iomem *ioaddr)
{
- struct phy_reg phy_reg_init[] = {
- { 0x1f, 0x0000 },
- { 0x10, 0xf41b },
- { 0x1f, 0x0000 }
- };
-
- rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168cp_hw_phy_config(void __iomem *ioaddr)
next prev parent reply other threads:[~2007-11-08 14:16 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-07 16:07 r8169: NFG in 2.6.24-rc2 Mark Lord
2007-11-07 17:11 ` Mark Lord
2007-11-07 18:02 ` [PATCH] r8169 fix regression on ASUS motherboards Mark Lord
2007-11-07 22:04 ` Francois Romieu
2007-11-07 22:21 ` Mark Lord
2007-11-07 22:25 ` [PATCH] r8169 fix regression on ASUS motherboards (updated) Mark Lord
2007-11-07 22:48 ` Francois Romieu
2007-11-07 23:23 ` Mark Lord
2007-11-07 23:20 ` Mark Lord
2007-11-08 0:21 ` Francois Romieu
2007-11-08 8:49 ` Hans-Jürgen Koch
2007-11-08 14:16 ` Mark Lord [this message]
2007-11-08 21:05 ` [PATCH] r8169 fix regression on ASUS motherboards (updated again) Francois Romieu
2007-11-07 21:03 ` r8169: NFG in 2.6.24-rc2 cecco
2007-11-07 22:08 ` Francois Romieu
2007-11-08 7:52 ` Hans-Jürgen Koch
2007-11-08 8:44 ` Hans-Jürgen Koch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47331A2C.6050005@rtr.ca \
--to=lkml@rtr.ca \
--cc=akpm@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox