public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
	patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v15 31/32] ARM: dts: aspeed: yosemite4: add GPIO I6
Date: Fri, 6 Sep 2024 11:29:02 +0200	[thread overview]
Message-ID: <474467d1-aa80-4ffb-a993-6f15d46bb4b7@kernel.org> (raw)
In-Reply-To: <20240906062701.37088-32-Delphine_CC_Chiu@wiwynn.com>

On 06/09/2024 08:26, Delphine CC Chiu wrote:
> Add BMC GPIO I6 for ALT_SMB_BMC_CPLD2_N.
> 
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> ---
>  arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> index 04aa428f94b7..0341b61aa1f1 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> @@ -2011,6 +2011,10 @@ pin_gpio_f7 {
>  		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
>  		input;
>  	};
> +	pin_gpio_i6 {

Follow DTS coding style.

Best regards,
Krzysztof


  reply	other threads:[~2024-09-06  9:29 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-06  6:26 [PATCH v15 00/32] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 01/32] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 04/32] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 05/32] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 06/32] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 07/32] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 08/32] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-09-06  7:34   ` Geert Uytterhoeven
2024-09-06  6:26 ` [PATCH v15 09/32] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-09-06  9:30   ` Krzysztof Kozlowski
2024-09-06  6:26 ` [PATCH v15 10/32] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 11/32] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 12/32] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 13/32] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 14/32] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 15/32] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 16/32] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 17/32] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 18/32] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 19/32] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 20/32] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 21/32] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 22/32] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
2024-09-06  7:42   ` Geert Uytterhoeven
2024-09-06  6:26 ` [PATCH v15 23/32] ARM: dts: aspeed: yosemite4: add fan led config Delphine CC Chiu
2024-09-06  7:45   ` Geert Uytterhoeven
2024-09-06  6:26 ` [PATCH v15 24/32] ARM: dts: aspeed: yosemite4: add XDP710 Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 25/32] ARM: dts: aspeed: yosemite4: add RTQ6056 support Delphine CC Chiu
2024-09-06  9:25   ` Krzysztof Kozlowski
2024-09-06  6:26 ` [PATCH v15 26/32] ARM: dts: aspeed: yosemite4: add MP5990 support Delphine CC Chiu
2024-09-06  9:25   ` Krzysztof Kozlowski
2024-09-06  6:26 ` [PATCH v15 27/32] ARM: dts: aspeed: yosemite4: Adjust ioexp bus and remove mctp driver Delphine CC Chiu
2024-09-06  6:26 ` [PATCH v15 28/32] ARM: dts: aspeed: yosemite4: fix GPIO linename typo Delphine CC Chiu
2024-09-06  9:27   ` Krzysztof Kozlowski
2024-09-06  6:26 ` [PATCH v15 29/32] ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41) Delphine CC Chiu
2024-09-06  9:28   ` Krzysztof Kozlowski
2024-09-06  6:26 ` [PATCH v15 30/32] ARM: dts: aspeed: yosemite4: add SQ52205 support Delphine CC Chiu
2024-09-06  7:38   ` Geert Uytterhoeven
2024-09-06  9:28   ` Krzysztof Kozlowski
2024-09-06  6:26 ` [PATCH v15 31/32] ARM: dts: aspeed: yosemite4: add GPIO I6 Delphine CC Chiu
2024-09-06  9:29   ` Krzysztof Kozlowski [this message]
2024-09-06  6:26 ` [PATCH v15 32/32] ARM: dts: aspeed: yosemite4: add ISL28022 support on 11 Delphine CC Chiu
2024-09-06  6:37   ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-06  9:29   ` Krzysztof Kozlowski
2024-09-06  9:34 ` [PATCH v15 00/32] Add i2c-mux and eeprom devices for Meta Yosemite 4 Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=474467d1-aa80-4ffb-a993-6f15d46bb4b7@kernel.org \
    --to=krzk@kernel.org \
    --cc=Delphine_CC_Chiu@wiwynn.com \
    --cc=andrew@codeconstruct.com.au \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=joel@jms.id.au \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=patrick@stwcx.xyz \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox