From: Greg Ungerer <gerg@snapgear.com>
To: Joe Perches <joe@perches.com>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] include/asm-m68knommu/: Spelling fixes
Date: Mon, 24 Dec 2007 21:04:35 +1000 [thread overview]
Message-ID: <476F9243.8020303@snapgear.com> (raw)
In-Reply-To: <1197920439-5455-17-git-send-email-joe@perches.com>
Joe Perches wrote:
> Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
> ---
> include/asm-m68knommu/bitops.h | 2 +-
> include/asm-m68knommu/commproc.h | 2 +-
> include/asm-m68knommu/delay.h | 2 +-
> include/asm-m68knommu/m5249sim.h | 4 ++--
> include/asm-m68knommu/m5307sim.h | 12 ++++++------
> include/asm-m68knommu/m5407sim.h | 12 ++++++------
> include/asm-m68knommu/m68360_regs.h | 2 +-
> include/asm-m68knommu/mcfuart.h | 2 +-
> 8 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h
> index f8dfb7b..89b928f 100644
> --- a/include/asm-m68knommu/bitops.h
> +++ b/include/asm-m68knommu/bitops.h
> @@ -262,7 +262,7 @@ static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned lon
> * tmp = __swab32(*(p++));
> * tmp |= ~0UL >> (32-offset);
> *
> - * but this would decrease preformance, so we change the
> + * but this would decrease performance, so we change the
> * shift:
> */
> tmp = *(p++);
> diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h
> index 0161ebb..36e870b 100644
> --- a/include/asm-m68knommu/commproc.h
> +++ b/include/asm-m68knommu/commproc.h
> @@ -715,7 +715,7 @@ extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
> #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
> #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
> #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
> -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
> +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
> #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
> #define CICR_IEN ((uint)0x00000080) /* Int. enable */
> #define CICR_SPS ((uint)0x00000001) /* SCC Spread */
> diff --git a/include/asm-m68knommu/delay.h b/include/asm-m68knommu/delay.h
> index 04a20fd..55cbd62 100644
> --- a/include/asm-m68knommu/delay.h
> +++ b/include/asm-m68knommu/delay.h
> @@ -68,7 +68,7 @@ static inline void _udelay(unsigned long usecs)
> /*
> * Moved the udelay() function into library code, no longer inlined.
> * I had to change the algorithm because we are overflowing now on
> - * the faster ColdFire parts. The code is a little biger, so it makes
> + * the faster ColdFire parts. The code is a little bigger, so it makes
> * sense to library it.
> */
> extern void udelay(unsigned long usecs);
> diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h
> index 399814f..366eb86 100644
> --- a/include/asm-m68knommu/m5249sim.h
> +++ b/include/asm-m68knommu/m5249sim.h
> @@ -43,10 +43,10 @@
> #define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
> #define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
> #define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
> -#define MCFSIM_CSAR2 0x98 /* CS 2 Adress reg (r/w) */
> +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
> #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
> #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
> -#define MCFSIM_CSAR3 0xa4 /* CS 3 Adress reg (r/w) */
> +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
> #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
> #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
>
> diff --git a/include/asm-m68knommu/m5307sim.h b/include/asm-m68knommu/m5307sim.h
> index d3ce550..5886728 100644
> --- a/include/asm-m68knommu/m5307sim.h
> +++ b/include/asm-m68knommu/m5307sim.h
> @@ -64,22 +64,22 @@
> #define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
> #define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
> #else
> -#define MCFSIM_CSAR2 0x98 /* CS 2 Adress reg (r/w) */
> +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
> #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
> #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
> -#define MCFSIM_CSAR3 0xa4 /* CS 3 Adress reg (r/w) */
> +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
> #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
> #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
> -#define MCFSIM_CSAR4 0xb0 /* CS 4 Adress reg (r/w) */
> +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
> #define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
> #define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
> -#define MCFSIM_CSAR5 0xbc /* CS 5 Adress reg (r/w) */
> +#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
> #define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
> #define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
> -#define MCFSIM_CSAR6 0xc8 /* CS 6 Adress reg (r/w) */
> +#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
> #define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
> #define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
> -#define MCFSIM_CSAR7 0xd4 /* CS 7 Adress reg (r/w) */
> +#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
> #define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
> #define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
> #endif /* CONFIG_OLDMASK */
> diff --git a/include/asm-m68knommu/m5407sim.h b/include/asm-m68knommu/m5407sim.h
> index 75dcdac..cc22c4a 100644
> --- a/include/asm-m68knommu/m5407sim.h
> +++ b/include/asm-m68knommu/m5407sim.h
> @@ -48,22 +48,22 @@
> #define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
> #define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
>
> -#define MCFSIM_CSAR2 0x98 /* CS 2 Adress reg (r/w) */
> +#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
> #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
> #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
> -#define MCFSIM_CSAR3 0xa4 /* CS 3 Adress reg (r/w) */
> +#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
> #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
> #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
> -#define MCFSIM_CSAR4 0xb0 /* CS 4 Adress reg (r/w) */
> +#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
> #define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
> #define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
> -#define MCFSIM_CSAR5 0xbc /* CS 5 Adress reg (r/w) */
> +#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
> #define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
> #define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
> -#define MCFSIM_CSAR6 0xc8 /* CS 6 Adress reg (r/w) */
> +#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
> #define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
> #define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
> -#define MCFSIM_CSAR7 0xd4 /* CS 7 Adress reg (r/w) */
> +#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
> #define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
> #define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
>
> diff --git a/include/asm-m68knommu/m68360_regs.h b/include/asm-m68knommu/m68360_regs.h
> index a3f8cc8..d57217c 100644
> --- a/include/asm-m68knommu/m68360_regs.h
> +++ b/include/asm-m68knommu/m68360_regs.h
> @@ -138,7 +138,7 @@
> #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
> #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
>
> -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
> +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
> #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
> #define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */
> #define CICR_SPS ((uint)0x00000001) /* SCC Spread */
> diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h
> index 873d080..873876d 100644
> --- a/include/asm-m68knommu/mcfuart.h
> +++ b/include/asm-m68knommu/mcfuart.h
> @@ -72,7 +72,7 @@ struct mcf_platform_uart {
> #define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
> #define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
> #define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
> -#define MCFUART_UISR 0x14 /* Interrup Status (r) */
> +#define MCFUART_UISR 0x14 /* Interrupt Status (r) */
> #define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
> #define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
> #define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
--
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: gerg@snapgear.com
SnapGear -- a Secure Computing Company PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
next prev parent reply other threads:[~2007-12-24 11:04 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918893.git.joe@perches.com>
2007-12-17 19:40 ` [PATCH] drivers/scsi/: Spelling fixes Joe Perches
2007-12-17 19:58 ` Mike Christie
2007-12-17 19:40 ` [PATCH] drivers/serial/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/spi/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/ssb/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/usb/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/video/: " Joe Perches
2007-12-17 19:40 ` [PATCH] drivers/watchdog/: " Joe Perches
2007-12-17 19:40 ` [PATCH] fs/: " Joe Perches
2007-12-17 19:40 ` [PATCH] include/asm-frv/: " Joe Perches
2007-12-17 19:40 ` [PATCH] include/asm-m68knommu/: " Joe Perches
2007-12-24 11:04 ` Greg Ungerer [this message]
2007-12-17 19:40 ` [PATCH] include/linux/: " Joe Perches
2007-12-17 21:56 ` [PATCH] drivers/scsi/: " Andrew Vasquez
2007-12-17 22:05 ` James Smart
2007-12-17 22:20 ` [PATCH] include/asm-frv/: " David Howells
2007-12-17 22:48 ` [PATCH] drivers/scsi/: " Darrick J. Wong
2007-12-18 2:27 ` David Somayajulu
2007-12-18 13:55 ` Salyzyn, Mark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=476F9243.8020303@snapgear.com \
--to=gerg@snapgear.com \
--cc=akpm@linux-foundation.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox