From: Philip Langdale <philipl@overt.org>
To: linux-kernel@vger.kernel.org, Pierre Ossman <drzeus@drzeus.cx>,
sdhci-devel@list.drzeus.cx
Subject: [PATCH] mmc: Handle suspend/resume in Ricoh MMC disabler
Date: Sat, 29 Dec 2007 00:11:42 -0800 [thread overview]
Message-ID: <4776013E.3070806@overt.org> (raw)
As pci config space is reinitialised on a suspend/resume cycle, the
disabler needs to work its magic at resume time. For symmetry this
change also explicitly enables the controller at suspend time but
it's not strictly necessary.
Signed-off-by: Philipl Langdale <philipl@overt.org>
--- linux-2.6.24/drivers/mmc/host/ricoh_mmc.c 2007-12-28 17:18:18.000000000 -0800
+++ linux-2.6.24-phil/drivers/mmc/host/ricoh_mmc.c 2007-12-29 00:05:30.000000000 -0800
@@ -41,6 +41,46 @@
MODULE_DEVICE_TABLE(pci, pci_ids);
+static int ricoh_mmc_disable(struct pci_dev *fw_dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ if (disable & 0x02) {
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller already disabled. Nothing to do.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now disabled.\n");
+
+ return 0;
+}
+
+static int ricoh_mmc_enable(struct pci_dev *fw_dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now re-enabled.\n");
+
+ return 0;
+}
+
static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -61,26 +101,12 @@
while ((fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
pdev->bus == fw_dev->bus) {
- u8 write_enable;
- u8 disable;
-
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- if (disable & 0x02) {
- printk(KERN_INFO DRIVER_NAME
- ": Controller already disabled. Nothing to do.\n");
+ if (ricoh_mmc_disable(fw_dev) != 0) {
return -ENODEV;
}
- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
pci_set_drvdata(pdev, fw_dev);
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now disabled.\n");
-
break;
}
}
@@ -96,30 +122,51 @@
static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
{
- u8 write_enable;
- u8 disable;
struct pci_dev *fw_dev = NULL;
fw_dev = pci_get_drvdata(pdev);
BUG_ON(fw_dev == NULL);
- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now re-enabled.\n");
+ ricoh_mmc_enable(fw_dev);
pci_set_drvdata(pdev, NULL);
}
+static int ricoh_mmc_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ printk(KERN_INFO DRIVER_NAME ": Suspending.\n");
+
+ ricoh_mmc_enable(fw_dev);
+
+ return 0;
+}
+
+static int ricoh_mmc_resume (struct pci_dev *pdev)
+{
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ printk(KERN_INFO DRIVER_NAME ": Resuming.\n");
+
+ ricoh_mmc_disable(fw_dev);
+
+ return 0;
+}
+
static struct pci_driver ricoh_mmc_driver = {
.name = DRIVER_NAME,
.id_table = pci_ids,
.probe = ricoh_mmc_probe,
.remove = __devexit_p(ricoh_mmc_remove),
+ .suspend = ricoh_mmc_suspend,
+ .resume = ricoh_mmc_resume,
};
/*****************************************************************************\
next reply other threads:[~2007-12-29 8:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-29 8:11 Philip Langdale [this message]
2008-01-05 22:20 ` [PATCH] mmc: Handle suspend/resume in Ricoh MMC disabler Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4776013E.3070806@overt.org \
--to=philipl@overt.org \
--cc=drzeus@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox