* looking for help with mpt fusion driver log: "FAULT code = 1804h"
@ 2008-01-08 18:00 Chris Friesen
0 siblings, 0 replies; only message in thread
From: Chris Friesen @ 2008-01-08 18:00 UTC (permalink / raw)
To: linux-scsi, linux-kernel
Hi all,
We're seeing the following on startup:
Fusion MPT base driver 3.02.55
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.02.55
mptbase: Initiating ioc0 bringup
mptbase: ioc0: WARNING - IOC is in FAULT state!!!
FAULT code = 1804h
mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=0
mptbase: ioc0 NOT READY WARNING!
mptbase: WARNING - ioc0 did not initialize properly! (-1)
mptsas: probe of 0000:05:01.0 failed with error -1
Is this a disk fault or a host fault? Can anyone identify what the
specific fault code means, or point me to a suitable resource?
Thanks,
Chris
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-01-08 18:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-08 18:00 looking for help with mpt fusion driver log: "FAULT code = 1804h" Chris Friesen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).