[PATCH 2/2] x86_64: move select_idle_routine() call after detect_ht()

[Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>]

From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Subject: [PATCH] x86_64: move select_idle_routine() call after detect_ht()

Move the select_idle_routine() call to after the detect_ht() call at
identify_cpu() on 64-bit.
This change is for printing the polling idle and HT enabled warning
message properly.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
---
 arch/x86/kernel/setup_64.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index c8dcdd2..8ebf990 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -1067,7 +1067,6 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 		break;
 	}
 
-	select_idle_routine(c);
 	detect_ht(c);
 
 	/*
@@ -1085,6 +1084,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_MCE
 	mcheck_init(c);
 #endif
+	select_idle_routine(c);
+
 	if (c != &boot_cpu_data)
 		mtrr_ap_init();
 #ifdef CONFIG_NUMA
-- 
1.5.3.6