From: Tejun Heo <htejun@gmail.com>
To: Shane Huang <Shane.Huang@amd.com>
Cc: gregkh@suse.de, linux-kernel@vger.kernel.org,
linux-pci@atrey.karlin.mff.cuni.cz
Subject: Re: [patch] PCI: modify SB700 SATA MSI quirk
Date: Fri, 25 Jan 2008 12:35:55 +0900 [thread overview]
Message-ID: <4799591B.5090905@gmail.com> (raw)
In-Reply-To: <B90463BC30D2E446BA423D888DC85E501BF8F0@sshaexmb1.amd.com>
Shane Huang wrote:
> I did some modification to this patch and send it again, Please check
> it.
> The quirk to 0x4395 has been removed because 0x4395 only belongs to
> SB800.
>
>> SB700 SATA MSI bug will be fixed in SB700 revision A21 at
>> hardware level,
>> but the SB700 revision older than A21 will also be found in
>> the market.
>> This patch modify the original quirk commit
>> bc38b411fe696fad32b261f492cb4afbf1835256 instead of withdrawing it.
You need to merge the above two messages into one patch description.
>> Signed-off-by: Shane Huang <shane.huang@amd.com>
After S-O-B, you can put --- and between it and the patch body, you can
say things which you wanna mention but don't think should be included in
commit message.
> +static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev
> *dev)
> +{
> + struct pci_dev *p;
> + u8 rev = 0;
> +
> + /* SB700 MSI issue will be fixed at HW level from revision A21,
> + * we need check PCI REVISION ID of SMBus controller to get
> SB700
> + * revision.
> + */
> + p = pci_get_device(PCI_VENDOR_ID_ATI,
> PCI_DEVICE_ID_ATI_SBX00_SMBUS,
> + NULL);
> + if (p) {
> + pci_read_config_byte(p, PCI_CLASS_REVISION, &rev);
Please drop unnecessary braces and you can you p->revision.
> + }
> + if ((rev < 0x3B) && (rev >= 0x30)) {
> + dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
> + }
Hmm... So, if there's no SMBUS device the quirk applies. Is this
intended? If that can't happen, just do if (!p) return;
Also, pci_get_device() requires matching pci_dev_put().
> +}
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
> PCI_DEVICE_ID_TIGON3_5780,
> quirk_msi_intx_disable_bug);
> @@ -1729,17 +1747,15 @@
> quirk_msi_intx_disable_bug);
>
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
> - quirk_msi_intx_disable_bug);
> + quirk_msi_intx_disable_ati_bug);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
> - quirk_msi_intx_disable_bug);
> + quirk_msi_intx_disable_ati_bug);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
> - quirk_msi_intx_disable_bug);
> + quirk_msi_intx_disable_ati_bug);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
> - quirk_msi_intx_disable_bug);
> + quirk_msi_intx_disable_ati_bug);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
> - quirk_msi_intx_disable_bug);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4395,
> - quirk_msi_intx_disable_bug);
> + quirk_msi_intx_disable_ati_bug);
You tested this, right?
--
tejun
next prev parent reply other threads:[~2008-01-25 3:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-18 9:14 [patch] PCI: disable MSI on more ATI NorthBridges Shane Huang
2007-10-18 10:19 ` David Miller
2007-10-18 10:37 ` Shane Huang
2007-10-18 11:46 ` David Miller
2007-10-18 15:24 ` Greg KH
2007-10-19 17:42 ` Daniel Barkalow
2008-01-24 10:59 ` [patch] PCI: disable the MSI of AMD RS690 Shane Huang
2008-01-24 11:12 ` [patch] PCI: modify SB700 SATA MSI quirk Shane Huang
2008-01-25 0:19 ` Tejun Heo
2008-01-25 3:26 ` Shane Huang
2008-01-25 3:35 ` Tejun Heo [this message]
2008-01-25 3:48 ` Shane Huang
2008-01-25 4:33 ` Greg KH
2008-01-24 11:15 ` [patch] PCI: disable the MSI of AMD RS690 Brice Goglin
2008-01-25 10:39 ` Shane Huang
-- strict thread matches above, loose matches on Subject: below --
2008-01-25 6:33 [PATCH] PCI: modify SB700 SATA MSI quirk Shane Huang
2008-01-25 6:46 ` Tejun Heo
2008-01-25 6:52 ` Shane Huang
2008-02-01 17:19 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4799591B.5090905@gmail.com \
--to=htejun@gmail.com \
--cc=Shane.Huang@amd.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox