Re: intel ahci problem

Evgen L
2008-01-31T06:59:32Z

Robert Hancock wrote:
> Evgen L wrote:
>> Hi all
>>
>> I have a problem with my Intel SR1550 server (S5000PAL motheboard,
>> SATA/SAS controller, 5 SATA HDD Seagate ST9120822AS ).
>> The four drivers are in two md raid1, which striping by lvm and one
>> drive used separately. I have problem like below with two different
>> drives (ata3 or ata4) and ata5. I look problem like this with RedHat
>> 2.6.18-53 kernel, 2.6.24-rc8, and today 2.6.24-git5. I reading about
>> any problems like this in lkml.org. There can be this message will
>> help to fix this issue.
>> The complete dmesg in attachment.
>>
>> md: bind<sdd1>
>> RAID1 conf printout:
>> --- wd:1 rd:2
>> disk 0, wo:0, o:1, dev:sdc1
>> disk 1, wo:1, o:1, dev:sdd1
>> md: recovery of RAID array md2
>> md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
>> md: using maximum available idle IO bandwidth (but not more than
>> 200000 KB/sec) for recovery.
>> md: using 128k window, over a total of 117218176 blocks.
>> ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>> ata4.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>> ata4.00: status: { DRDY }
>> ata4: hard resetting link
>> ata4: port is slow to respond, please be patient (Status 0x80)
>> ata4: softreset failed (device not ready)
>> ata4: hard resetting link
>> ata4: port is slow to respond, please be patient (Status 0x80)
>> ata4: softreset failed (device not ready)
>> ata4: hard resetting link
>> ata4: port is slow to respond, please be patient (Status 0x80)
>> ata4: softreset failed (device not ready)
>> ata4: limiting SATA link speed to 1.5 Gbps
>> ata4: hard resetting link
>> ata4: softreset failed (device not ready)
>> ata4: reset failed, giving up
>> ata4.00: disabled
>
> Are you sure this is not a hardware problem (bad disk, cable, etc?) Is
> it always ata4 that fails?
>
I'm sure - it's not hardware problem, I testing different disks, and
not always ata4 fails, sometimes ata3, but ata5 - always.