* 2.6.23.14 snd_hda_intel problem
@ 2008-01-31 23:28 Eyal Lebedinsky
2008-02-01 8:56 ` Clemens Ladisch
0 siblings, 1 reply; 4+ messages in thread
From: Eyal Lebedinsky @ 2008-01-31 23:28 UTC (permalink / raw)
To: list linux-kernel
[-- Attachment #1: Type: text/plain, Size: 411 bytes --]
Running fc7 all was well up until 2.6.23.12-52.fc7.
A recent update to 2.6.23.14-64.fc7 lost sound. The boot log now has
hda-intel: Error creating card!
HDA Intel: probe of 0000:00:1b.0 failed with error -12
Mobo is Intel BLKDG965OTMKR.
The device is
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
dmesg attached.
TIA
--
Eyal Lebedinsky (eyal@eyal.emu.id.au)
[-- Attachment #2: dmesg.2.6.23.12-52.fc7 --]
[-- Type: text/plain, Size: 26091 bytes --]
Linux version 2.6.23.12-52.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Tue Dec 18 20:27:10 EST 2007
Command line: ro root=LABEL=/ rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007edb6000 (usable)
BIOS-e820: 000000007edb6000 - 000000007edc3000 (reserved)
BIOS-e820: 000000007edc3000 - 000000007ee47000 (usable)
BIOS-e820: 000000007ee47000 - 000000007eeac000 (ACPI NVS)
BIOS-e820: 000000007eeac000 - 000000007eeaf000 (ACPI data)
BIOS-e820: 000000007eeaf000 - 000000007eef2000 (ACPI NVS)
BIOS-e820: 000000007eef2000 - 000000007eeff000 (ACPI data)
BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable)
BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 519606) 1 entries of 3200 used
Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used
Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FE020, 0014 (r0 INTEL )
ACPI: RSDT 7EEFD038, 004C (r1 INTEL DG965OT 330 1000013)
ACPI: FACP 7EEFC000, 0074 (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: DSDT 7EEF8000, 3EDA (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: FACS 7EEAF000, 0040
ACPI: APIC 7EEF7000, 0078 (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: WDDT 7EEF6000, 0040 (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: MCFG 7EEF5000, 003C (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: ASF! 7EEF4000, 00A6 (r32 INTEL DG965OT 330 MSFT 1000013)
ACPI: SSDT 7EEF3000, 01BC (r1 INTEL CpuPm 330 MSFT 1000013)
ACPI: SSDT 7EEF2000, 0175 (r1 INTEL Cpu0Ist 330 MSFT 1000013)
ACPI: SSDT 7EEAE000, 0175 (r1 INTEL Cpu1Ist 330 MSFT 1000013)
ACPI: SSDT 7EEAD000, 0175 (r1 INTEL Cpu2Ist 330 MSFT 1000013)
ACPI: SSDT 7EEAC000, 0175 (r1 INTEL Cpu3Ist 330 MSFT 1000013)
No NUMA configuration found
Faking a node at 0000000000000000-000000007ef00000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 519606) 1 entries of 3200 used
Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used
Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007ef00000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 519606
0: 519619 -> 519751
0: 519935 -> 519936
On node 0 totalpages: 519642
DMA zone: 56 pages used for memmap
DMA zone: 1307 pages reserved
DMA zone: 2636 pages, LIFO batch:0
DMA32 zone: 7052 pages used for memmap
DMA32 zone: 508591 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000007edb6000 - 000000007edc3000
swsusp: Registered nosave memory region: 000000007ee47000 - 000000007eeac000
swsusp: Registered nosave memory region: 000000007eeac000 - 000000007eeaf000
swsusp: Registered nosave memory region: 000000007eeaf000 - 000000007eef2000
swsusp: Registered nosave memory region: 000000007eef2000 - 000000007eeff000
Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 41176 bytes of per cpu data
Built 1 zonelists in Node order. Total pages: 511227
Policy zone: DMA32
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2131.220 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2041240k/2079744k available (2417k kernel code, 37328k reserved, 1369k data, 324k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4264.20 BogoMIPS (lpj=2132103)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16650146
Detected 16.650 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4261.83 BogoMIPS (lpj=2130919)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2080 bytes
Time: 22:09:37 Date: 01/31/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f has been reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:20000@a0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: a0000000-a1ffffff
PREFETCH window: 80000000-9fffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: a2300000-a23fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 1000-1fff
MEM window: a2100000-a21fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: a2400000-a24fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: a2500000-a25fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: a2600000-a26fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: a2000000-a20fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3068k freed
audit: initializing netlink socket (disabled)
audit(1201817376.445:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 7C3D39AAD2D29BC5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Magic number: 8:250:200
Freeing unused kernel memory: 324k freed
Write protecting the kernel read-only data: 1012k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020a0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 3-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xa2225400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Headset as /class/input/input3
input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa2225000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x0000000000012138 ctl 0x000000000001214e bmdma 0x0000000000012110 irq 19
ata2: SATA max UDMA/133 cmd 0x0000000000012130 ctl 0x000000000001214a bmdma 0x0000000000012118 irq 19
ata1.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7
ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x0000000000012128 ctl 0x0000000000012146 bmdma 0x00000000000120f0 irq 19
ata4: SATA max UDMA/133 cmd 0x0000000000012120 ctl 0x0000000000012142 bmdma 0x00000000000120f8 irq 19
usb 7-3: new high speed USB device using ehci_hcd and address 3
usb 7-3: configuration #1 chosen from 1 choice
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 2 ports detected
usb 3-2: USB disconnect, address 2
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Headset as /class/input/input4
input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2
usb 7-3.1: new high speed USB device using ehci_hcd and address 5
usb 7-3.1: configuration #1 chosen from 1 choice
hub 7-3.1:1.0: USB hub found
hub 7-3.1:1.0: 4 ports detected
usb 7-3.2: new high speed USB device using ehci_hcd and address 6
usb 7-3.2: configuration #1 chosen from 1 choice
usb 4-2: new low speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps as /class/input/input5
input: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:1d.1-2
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 17
ata6: DUMMY
BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.00, max UDMA/66
ata5.00: configured for UDMA/66
scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22N 1.00 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1201817384.527:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1835 types, 87 bools, 1 sens, 1024 cats
security: 61 classes, 69985 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1201817384.811:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
input: PC Speaker as /class/input/input6
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
nvidia: module license 'NVIDIA' taints kernel.
input: Power Button (FF) as /class/input/input7
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input8
ACPI: Sleep Button (CM) [SLPB]
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.07 Thu Dec 13 18:34:01 PST 2007
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:b6:bc:b6
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usbcore: registered new interface driver snd-usb-audio
firewire_core: created new fw device fw0 (0 config rom retries, S400)
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg5 type 0
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[-- Attachment #3: dmesg.2.6.23.14-64.fc7 --]
[-- Type: text/plain, Size: 26106 bytes --]
Linux version 2.6.23.14-64.fc7 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Sun Jan 20 22:20:19 EST 2008
Command line: ro root=LABEL=/ rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007edb6000 (usable)
BIOS-e820: 000000007edb6000 - 000000007edc3000 (reserved)
BIOS-e820: 000000007edc3000 - 000000007ee47000 (usable)
BIOS-e820: 000000007ee47000 - 000000007eeac000 (ACPI NVS)
BIOS-e820: 000000007eeac000 - 000000007eeaf000 (ACPI data)
BIOS-e820: 000000007eeaf000 - 000000007eef2000 (ACPI NVS)
BIOS-e820: 000000007eef2000 - 000000007eeff000 (ACPI data)
BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable)
BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 519606) 1 entries of 3200 used
Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used
Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FE020, 0014 (r0 INTEL )
ACPI: RSDT 7EEFD038, 004C (r1 INTEL DG965OT 330 1000013)
ACPI: FACP 7EEFC000, 0074 (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: DSDT 7EEF8000, 3EDA (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: FACS 7EEAF000, 0040
ACPI: APIC 7EEF7000, 0078 (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: WDDT 7EEF6000, 0040 (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: MCFG 7EEF5000, 003C (r1 INTEL DG965OT 330 MSFT 1000013)
ACPI: ASF! 7EEF4000, 00A6 (r32 INTEL DG965OT 330 MSFT 1000013)
ACPI: SSDT 7EEF3000, 01BC (r1 INTEL CpuPm 330 MSFT 1000013)
ACPI: SSDT 7EEF2000, 0175 (r1 INTEL Cpu0Ist 330 MSFT 1000013)
ACPI: SSDT 7EEAE000, 0175 (r1 INTEL Cpu1Ist 330 MSFT 1000013)
ACPI: SSDT 7EEAD000, 0175 (r1 INTEL Cpu2Ist 330 MSFT 1000013)
ACPI: SSDT 7EEAC000, 0175 (r1 INTEL Cpu3Ist 330 MSFT 1000013)
No NUMA configuration found
Faking a node at 0000000000000000-000000007ef00000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 519606) 1 entries of 3200 used
Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used
Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007ef00000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 519606
0: 519619 -> 519751
0: 519935 -> 519936
On node 0 totalpages: 519642
DMA zone: 56 pages used for memmap
DMA zone: 1307 pages reserved
DMA zone: 2636 pages, LIFO batch:0
DMA32 zone: 7052 pages used for memmap
DMA32 zone: 508591 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000007edb6000 - 000000007edc3000
swsusp: Registered nosave memory region: 000000007ee47000 - 000000007eeac000
swsusp: Registered nosave memory region: 000000007eeac000 - 000000007eeaf000
swsusp: Registered nosave memory region: 000000007eeaf000 - 000000007eef2000
swsusp: Registered nosave memory region: 000000007eef2000 - 000000007eeff000
Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 41176 bytes of per cpu data
Built 1 zonelists in Node order. Total pages: 511227
Policy zone: DMA32
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2131.261 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2041244k/2079744k available (2418k kernel code, 37324k reserved, 1368k data, 324k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4264.19 BogoMIPS (lpj=2132097)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16650471
Detected 16.650 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4432.26 BogoMIPS (lpj=2216132)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2080 bytes
Time: 9:43:15 Date: 01/31/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f has been reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:20000@a0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: a0000000-a1ffffff
PREFETCH window: 80000000-9fffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: a2300000-a23fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 1000-1fff
MEM window: a2100000-a21fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: a2400000-a24fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: a2500000-a25fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: a2600000-a26fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: a2000000-a20fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3066k freed
audit: initializing netlink socket (disabled)
audit(1201772595.441:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 4E0C9E3E2FB53A6F
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Magic number: 8:934:728
Freeing unused kernel memory: 324k freed
Write protecting the kernel read-only data: 1012k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020a0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 3-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xa2225400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Headset as /class/input/input3
input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa2225000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x0000000000012138 ctl 0x000000000001214e bmdma 0x0000000000012110 irq 19
ata2: SATA max UDMA/133 cmd 0x0000000000012130 ctl 0x000000000001214a bmdma 0x0000000000012118 irq 19
ata1.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7
ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x0000000000012128 ctl 0x0000000000012146 bmdma 0x00000000000120f0 irq 19
ata4: SATA max UDMA/133 cmd 0x0000000000012120 ctl 0x0000000000012142 bmdma 0x00000000000120f8 irq 19
usb 7-3: new high speed USB device using ehci_hcd and address 3
usb 7-3: configuration #1 chosen from 1 choice
hub 7-3:1.0: USB hub found
hub 7-3:1.0: 2 ports detected
usb 3-2: USB disconnect, address 2
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Headset as /class/input/input4
input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2
usb 7-3.1: new high speed USB device using ehci_hcd and address 5
usb 7-3.1: configuration #1 chosen from 1 choice
hub 7-3.1:1.0: USB hub found
hub 7-3.1:1.0: 4 ports detected
usb 7-3.2: new high speed USB device using ehci_hcd and address 6
usb 7-3.2: configuration #1 chosen from 1 choice
usb 4-2: new low speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps as /class/input/input5
input: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:1d.1-2
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 17
ata6: DUMMY
BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.00, max UDMA/66
ata5.00: configured for UDMA/66
scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22N 1.00 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1201772603.509:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1835 types, 87 bools, 1 sens, 1024 cats
security: 61 classes, 69985 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1201772603.801:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Power Button (FF) as /class/input/input6
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input7
ACPI: Sleep Button (CM) [SLPB]
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:b6:bc:b6
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
input: PC Speaker as /class/input/input8
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
firewire_core: created new fw device fw0 (0 config rom retries, S400)
usbcore: registered new interface driver snd-usb-audio
cannot find the slot for index 0 (range 0-0), error: -16
hda-intel: Error creating card!
HDA Intel: probe of 0000:00:1b.0 failed with error -12
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.07 Thu Dec 13 18:34:01 PST 2007
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg5 type 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.23.14 snd_hda_intel problem
2008-01-31 23:28 2.6.23.14 snd_hda_intel problem Eyal Lebedinsky
@ 2008-02-01 8:56 ` Clemens Ladisch
2008-02-01 10:04 ` Eyal Lebedinsky
0 siblings, 1 reply; 4+ messages in thread
From: Clemens Ladisch @ 2008-02-01 8:56 UTC (permalink / raw)
To: Eyal Lebedinsky; +Cc: list linux-kernel
Eyal Lebedinsky wrote:
> A recent update to 2.6.23.14-64.fc7 lost sound. The boot log now has
> hda-intel: Error creating card!
> HDA Intel: probe of 0000:00:1b.0 failed with error -12
The two lines before:
| usbcore: registered new interface driver snd-usb-audio
| cannot find the slot for index 0 (range 0-0), error: -16
... show that a USB audio device was loaded as the first card (at
index 0), and that the HDA device doesn't load because it tries to go
to the same index.
Use the sound card configuration utility of your distribution to
configure the USB audio device to be the second device, or add the line
options snd-usb-audio index=1
to /etc/modprobe.conf.
HTH
Clemens
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.23.14 snd_hda_intel problem
2008-02-01 8:56 ` Clemens Ladisch
@ 2008-02-01 10:04 ` Eyal Lebedinsky
2008-02-01 12:34 ` Clemens Ladisch
0 siblings, 1 reply; 4+ messages in thread
From: Eyal Lebedinsky @ 2008-02-01 10:04 UTC (permalink / raw)
To: Clemens Ladisch; +Cc: list linux-kernel
Clemens
My /etc/modprobe.conf now contains:
alias snd-card-0 snd-hda-intel
options snd-card-0 index=0
options snd-hda-intel index=0
and and I should add
options snd-usb-audio index=1
right?
Any idea why has this changed between the two minor kernel revisions though?
Thanks
Eyal
Clemens Ladisch wrote:
> Eyal Lebedinsky wrote:
>> A recent update to 2.6.23.14-64.fc7 lost sound. The boot log now has
>> hda-intel: Error creating card!
>> HDA Intel: probe of 0000:00:1b.0 failed with error -12
>
> The two lines before:
> | usbcore: registered new interface driver snd-usb-audio
> | cannot find the slot for index 0 (range 0-0), error: -16
>
> ... show that a USB audio device was loaded as the first card (at
> index 0), and that the HDA device doesn't load because it tries to go
> to the same index.
>
> Use the sound card configuration utility of your distribution to
> configure the USB audio device to be the second device, or add the line
> options snd-usb-audio index=1
> to /etc/modprobe.conf.
>
> HTH
> Clemens
--
Eyal Lebedinsky (eyal@eyal.emu.id.au)
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.23.14 snd_hda_intel problem
2008-02-01 10:04 ` Eyal Lebedinsky
@ 2008-02-01 12:34 ` Clemens Ladisch
0 siblings, 0 replies; 4+ messages in thread
From: Clemens Ladisch @ 2008-02-01 12:34 UTC (permalink / raw)
To: Eyal Lebedinsky; +Cc: list linux-kernel
Eyal Lebedinsky wrote:
> My /etc/modprobe.conf now contains:
> alias snd-card-0 snd-hda-intel
> options snd-card-0 index=0
> options snd-hda-intel index=0
> and and I should add
> options snd-usb-audio index=1
> right?
Yes.
> Any idea why has this changed between the two minor kernel revisions though?
Probably nothing. The exact loading order of USB and PCI driver is
somewhat random.
Regards,
Clemens
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-02-01 12:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-31 23:28 2.6.23.14 snd_hda_intel problem Eyal Lebedinsky
2008-02-01 8:56 ` Clemens Ladisch
2008-02-01 10:04 ` Eyal Lebedinsky
2008-02-01 12:34 ` Clemens Ladisch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox