From: Roel Kluin <12o3l@tiscali.nl>
To: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>,
rpurdie@openedhand.com,
Linux-arm <linux-arm-kernel@lists.arm.linux.org.uk>,
linux-main <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH/HP7XX] - Add combined LCD / BL driver for platform HP Jornada 7xx handhelds
Date: Wed, 06 Feb 2008 18:04:03 +0100 [thread overview]
Message-ID: <47A9E883.2000806@tiscali.nl> (raw)
In-Reply-To: <20080206173341.619c52c8.Kristoffer.ericson@gmail.com>
Kristoffer Ericson wrote:
> Oki, here is attempt #2 (btw, new mail or just keep thread?)
>
> Tested to build and checkpatch.
>
> diff --git a/drivers/video/backlight/jornada720_bllcd.c b/drivers/video/backlight/jornada720_bllcd.c
> +static int jornada_bl_update_status(struct backlight_device *dev)
> +{
> + int ret = 0;
> +
> + jornada_ssp_start();
> +
> + if (dev->props.power != FB_BLANK_UNBLANK ||
> + dev->props.fb_blank != FB_BLANK_UNBLANK) {
> + ret = jornada_ssp_inout(BRIGHTNESSOFF);
> + if (ret == -ETIMEDOUT)
since there is no curly bracket here...
> + printk(KERN_ERR "jornada720_bl: \
> + BrightnessOff timeout\n");
...indentation is wrong in lines below
> + /* backlight off */
> + PPSR &= ~PPC_LDD1;
> + PPDR |= PPC_LDD1;
> +
> + } else { /* backlight on */
too much indentation in lines below as well
> + PPSR |= PPC_LDD1;
> + if ((jornada_ssp_inout(SETBRIGHTNESS)) == TXDUMMY) {
> + /* send brightness value (0 is max, 255 lowest) */
> + if (jornada_ssp_byte(JORNADA_BL_MAX_BRIGHTNESS -
> + dev->props.brightness) != -ETIMEDOUT)
> + ret = (JORNADA_BL_MAX_BRIGHTNESS -
> + dev->props.brightness);
> + } else
> + printk(KERN_ERR "jornada720_bl: \
> + SetBrightness timeout\n");
> + }
> + jornada_ssp_end();
> +
> + return ret;
> +}
> +static int jornada_lcd_set_contrast(struct lcd_device *pdev, int contrast)
> +{
> + int ret = 0;
> +
> + jornada_ssp_start();
> +
> + ret = jornada_ssp_inout(SETCONTRAST);
> +
> + if (ret == -ETIMEDOUT)
> + printk(KERN_ERR "jornada_lcd: failure to set contrast\n");
> + else
whitespace before else
> + ret = jornada_ssp_byte(contrast);
> +
> + jornada_ssp_end();
> +
> + return ret;
> +}
> +
> +static int jornada_lcd_set_power(struct lcd_device *pdev, int power)
> +{
> + if (power != FB_BLANK_UNBLANK) {
> + /* turn off LCD */
> + PPSR &= ~PPC_LDD2;
> + PPDR |= PPC_LDD2;
> + } else {
> + /* turn on LCD */
> + PPSR |= PPC_LDD2;
> + }
whitespace before curly bracket
> +
> + return 0;
> +}
next prev parent reply other threads:[~2008-02-06 17:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-05 18:53 [PATCH/HP7XX] - Add combined LCD / BL driver for platform HP Jornada 7xx handhelds Kristoffer Ericson
2008-02-06 12:34 ` Roel Kluin
2008-02-06 12:38 ` Roel Kluin
2008-02-06 16:33 ` Kristoffer Ericson
2008-02-06 16:44 ` Russell King - ARM Linux
2008-02-06 19:21 ` Kristoffer Ericson
2008-02-06 19:31 ` Russell King - ARM Linux
2008-02-06 19:43 ` Kristoffer Ericson
2008-02-06 19:45 ` Russell King - ARM Linux
2008-02-07 7:19 ` Uwe Kleine-König
2008-02-06 19:49 ` Kristoffer Ericson
2008-02-06 17:04 ` Roel Kluin [this message]
2008-02-06 17:22 ` Sam Ravnborg
2008-02-06 17:25 ` Richard Purdie
2008-02-06 16:26 ` Kristoffer Ericson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A9E883.2000806@tiscali.nl \
--to=12o3l@tiscali.nl \
--cc=kristoffer.ericson@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rpurdie@openedhand.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox